Search

Purpose: To compute reference centiles for 5- and 30-m sprint times relative to chronological and skeletal age in youth soccer players. Subsequently, to compare individual's sprint performance scores derived from the chronological and skeletal age reference centiles. Methods: Sprint times were collected for a sample of male U11 to U19 soccer players (n = 1745 data points). Skeletal age data were available for a subsample (n = 776 data points). Reference centiles were fitted using generalized additive models for location, scale, and shape. Individual z scores relative to chronological and skeletal age reference centiles were computed and compared for each maturity group (late, on-time, early, and very early) using standardized mean differences (SMD). Results: Reference centiles for chronological age increased more rapidly between 10.5 and 15.5 years, while reference centiles for skeletal age increased more rapidly between 13.0 and 16.5 years. Differences in chronological and skeletal z scores for very early (SMD: −0.73 to −0.43) and late (SMD: 0.58 to 1.29) maturing players were small to large, while differences for early (SMD: −0.30 to −0.19) and on-time (SMD: 0.16 to 0.28) were trivial to small. Conclusion: Reference centiles provide a valuable tool to assist the evaluation of sprint performance in relation to chronological and skeletal age for talent identification purposes in youth soccer players. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the influence of immediate loading on the osseointegration and bone density of implants placed in a healed alveolar bone crest and supporting single crowns. Materials and Methods: Two solid titanium transmucosal mini-implants were placed in the distal regions of the mandible in 14 patients. One mini-implant was immediately functionally loaded, whereas the other was left unloaded. After 2 months of healing, biopsy samples were retrieved and the levels of new bone, old bone, and total bone (new + old) were assessed. Results: Histologic examination was performed on biopsies from 12 patients (n = 12). The new bone-to-implant contact percentage (BIC%) was 40.3% ± 16.8% and 55.1% ± 19.1% (P = .043) at the unloaded and loaded sites, respectively; in addition, the total BIC% was 44.9% ± 17.0% and 59.5% ± 18.8%, respectively (P = .034). The new bone density was 45.9% ± 11.6% for the unloaded implants and 45.9% ± 16.7% for the loaded implants (P = .622). Conclusions: Immediate loading had a positive effect on bone apposition at the implant surface, but no effect on bone density was observed after 2 months of healing. [ABSTRACT FROM AUTHOR]

Background and purposeClinicians use reference values to contextualize physical performance scores, but data are sparse in individuals 90 years and older and racial/ethnic diversity is limited in existing studies. Gait speed provides valuable information about an individual's health status. Slow gait speed is associated with falls, cognitive decline, and mortality. Here, we report gait speed reference values in a racially/ethnically diverse oldest-old cohort.MethodsLifeAfter90 is a multiethnic cohort study of individuals 90 years and older. Participants are long-term members of an integrated healthcare delivery system without a dementia diagnosis at enrollment. We assessed gait speed using the 4-m walk test and calculated means, standard deviations, and percentiles by age, sex, assistive device use, and device type. We used linear regression to compare means by sex, age, device use and type, living situation and arrangement, and race/ethnicity.Results and discussionThe mean age of the 502 participants was 92.9 (range 90.1-102.8) years. Of these, 62.6% were women, 34.7% were college educated, 90.8% lived in a private residence, 20.9% self-reported as Asian, 22.5% as Black, 11.8% as Hispanic, 35.7% as White, and 9.2% as multiple, "other," or declined to state. The overall mean gait speed was 0.54 m/s (women = 0.51 m/s, men = 0.58 m/s). Mean gait speeds were 0.58 m/s, 0.53 m/s, and 0.48 m/s in the 90 to 91, 92 to 93, and 94+ age categories, respectively. In those without a device, mean gait speed was 0.63 m/s compared to 0.40 m/s in those with a device (cane = 0.44 m/s, walker = 0.37 m/s). Mean gait speed was significantly slower in women compared to men, age category 94+ compared to 90 to 91, participants with a device compared to those without, participants with a walker compared to a cane, and Black participants compared to Asian and White participants. However, differences by race/ethnicity were attenuated when chronic health conditions were considered.ConclusionsReference values developed from this multiethnic 90+ cohort will help clinicians interpret gait speed measures and tailor recommendations toward a 90+ population that is growing in number and in racial/ethnic diversity.

In this paper, benchmark results are presented on the calculation of vertical electronic excitation energies using a long-range second-order polarization propagator approximation (SOPPA) description with a short-range density functional theory description based on the Perdew–Burke–Ernzerhof (PBE) functional. The excitation energies are investigated for 132 singlet states and 71 triplet states across 28 medium-sized organic molecules. The results show that overall SOPPA-srPBE always performs better than PBE and that SOPPA-srPBE performs better than SOPPA for singlet states, but slightly worse than SOPPA for triplet states when CC3 results are the reference values. [ABSTRACT FROM AUTHOR]

In this work, the effect of the range of dispersive interactions in determining the three-phase coexistence line of the CO2 and CH4 hydrates has been studied. In particular, the temperature (T3) at which solid hydrate, water, and liquid CO2/gas CH4 coexist has been determined through molecular dynamics simulations using different cutoff values (from 0.9 to 1.6 nm) for dispersive interactions. The T3 of both hydrates has been determined using the direct coexistence simulation technique. Following this method, the three phases in equilibrium are put together in the same simulation box, the pressure is fixed, and simulations are performed at different temperatures T. If the hydrate melts, then T > T3. Conversely, if the hydrate grows, then T < T3. The effect of the cutoff distance on the dissociation temperature has been analyzed at three different pressures for CO2 hydrate: 100, 400, and 1000 bar. Then, we have changed the guest and studied the effect of the cutoff distance on the dissociation temperature of the CH4 hydrate at 400 bar. Moreover, the effect of long-range corrections for dispersive interactions has been analyzed by running simulations with homo- and inhomogeneous corrections and a cutoff value of 0.9 nm. The results obtained in this work highlight that the cutoff distance for the dispersive interactions affects the stability conditions of these hydrates. This effect is enhanced when the pressure is decreased, displacing the T3 about 2–4 K depending on the system and the pressure. [ABSTRACT FROM AUTHOR]

In this study, the performance of the doubles-corrected higher random-phase approximation [HRPA(D)] has been investigated in calculations of nuclear magnetic resonance spin–spin coupling constants (SSCCs) for 58 molecules with the experimental values used as the reference values. HRPA(D) is an approximation to the second-order polarization propagator approximation (SOPPA) and is, therefore, computationally less expensive than SOPPA. HRPA(D) performs comparable and sometimes even better than SOPPA, and therefore, when calculating SSCCs, it should be considered as an alternative to SOPPA. Furthermore, it was investigated whether a coupled-cluster singles, doubles and perturbative triples [CCSD(T)] or Møller-Plesset second order (MP2) geometry optimization was optimal for a SOPPA and a HRPA(D) SSCC calculation for eight smaller molecules. CCSD(T) is the optimal geometry optimization for the SOPPA calculation, and MP2 was optimal for HRPA(D) SSCC calculations. [ABSTRACT FROM AUTHOR]

Predicting the energy differences between different spin-states is challenging for many widely used ab initio electronic structure methods. We here assess the ability of the direct random phase approximation (dRPA), dRPA plus two different screened second-order exchange (SOX) corrections, and σ-functionals to predict adiabatic singlet-triplet gaps. With mean absolute deviations of below 0.1 eV to experimental reference values, independent of the Kohn–Sham starting point, dRPA and σ-functionals accurately predict singlet-triplet gaps of 18 organic chromophores. The addition of SOX corrections to dRPA considerably worsens agreement with experiment, adding to the mounting evidence that dRPA+SOX methods are not generally applicable beyond-RPA methods. Also for a series of linear acene chains with up to ten fused rings, dRPA, and σ-functionals are in excellent agreement with coupled-cluster single double triple reference data. In agreement with advanced multi-reference methods, dRPA@PBE and σ-functional@PBE predict a singlet ground state for all chain lengths, while dRPA@PBE0 and σ-functional@PBE0 predict a triplet ground state for longer acenes. Our work shows dRPA and σ-functionals to be reliable methods for calculating singlet-triplet gaps in aromatic molecules. [ABSTRACT FROM AUTHOR]

Purpose: To develop age-specific reference intervals for physical performance test outcomes relevant to male youth Middle Eastern football players. Methods: We analyzed mixed-longitudinal data (observations range: 1751–1943 assessments) from a sample of 441 male youth outfield football players (chronological age range: 11.7–18.4 y) as part of the Qatar Football Association and Aspire Academy development program over 14 competitive seasons. Semiparametric generalized additive models for location, scale, and shape estimated age-specific reference centiles for 10-m sprinting, 40-m sprinting, countermovement jump height, and maximal aerobic speed variables. Results: The estimated reference intervals indicated that the distribution of the physical performance test scores increased monotonically and nonlinearly with advancing chronological age for sprinting and countermovement jump outcome measures, reaching a plateau after 16 years common to each of these performance variables. The maximal aerobic speed median score increased substantially until ∼14.5 years, with the nonlinear trend flattening off toward relatively older chronological ages. Conclusions: We developed age-related reference intervals for physical performance test outcomes relevant to youth Qatari football players. Country-wide age-specific reference intervals can assist in the longitudinal tracking of the individual players' progress over time against benchmark values derived from the reference population. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of the study was to examine whether various athletic performances, anthropometric measures, and playing experience differentiate selected and nonselected ultimate Frisbee players trialing to compete in the world championship. Methods: Forty-three Australian male ultimate Frisbee players (age = 21.2 [1.2] y; height = 1.7 [6.8] m; body mass = 69.7 [8.2] kg; playing experience = 3.5 [1.5] y) participated in a 30-m sprint test, single-leg run-up jump approach (both left [JumpLL], and right leg [JumpRL]) and a stationary bilateral vertical jump (JumpBIL), and change-of-direction speed test. Following a selection camp, players were subdivided according to their selection or nonselection into the team. Results: A multivariate analysis of variance revealed that height, 10-m sprint time, acceleration, JumpLL, JumpRL, and JumpBIL were significantly greater for selected players than nonselected players (P <.05). Area under the curve (AUC) was greatest for JumpRL (AUC = 79%; optimal cutoff value of 37.5 cm, sensitivity and specificity values of 77% and 71%, respectively), JumpLL (AUC = 74%; optimal cutoff 38.5 cm, sensitivity and specificity values 77% and 77%, respectively), and JumpBIL (AUC = 78%; optimal cutoff value of 40.5 cm, sensitivity and specificity values 71% and 79%, respectively). The largest AUC (AUC = 81%; 95% CI 0.66–0.97; P =.001) was found when combining the explanatory variables that demonstrated moderate to large effect sizes (ie, height, playing experience, 10-m sprint, acceleration, JumpLL, JumpRL, and JumpBIL), with sensitivity of 93% and specificity of 71%. Conclusion: These athletic performance and anthropometric characteristics differentiating selected and nonselected players may help inform targeted training and player-development strategies. [ABSTRACT FROM AUTHOR]

Poverty alleviation resettlement (PAR) programme is the largest-scale poverty alleviation relocation in human history, but its impact on urbanization has received little academic attention. To fill this important gap, this study first proposed a theoretical framework of the "pressure-state-response-effect" (PSRE) of PAR promoting urbanization. Then, we regarded PAR as a quasi-natural experiment and used the PSM-DID model to assess the impact of PAR on urbanization based on the panel data of 2,081 counties in China from 2013 to 2020. Results showed that PAR had a significant positive impact on the urbanization rate of these counties, with a growth rate of 0.64%. Further mechanism analysis showed that industrial upgrading could expand the impact of PAR implementation on promoting urbanization. Additionally, PAR in the eastern and western, hilly and mountainous counties could improve the urbanization level more than that in the central and plain counties. The effectiveness of PAR varied across regions, requiring consideration of local socioeconomic complexity rather than a one-size-fits-all approach. Our findings would have important reference value for other developing countries to formulate their anti-poverty strategies to achieve the 2030 UN Sustainable Development Goals. [ABSTRACT FROM AUTHOR]

Background Given rising youth sport participation, 8 to 10-year-olds increasingly display comparable lower-extremity injury incidence to 11 to 17-year-olds and require effective return to sport criteria. One such criterion which quantifies dynamic stability is the Y-Balance Test (YBT), though it has not been validated in children under age 11. Hypothesis/Purpose The purpose of this study was to examine the performance of 8 to 10-year-old patients on the YBT after lower-extremity injury and determine how these results compare to larger samples of age-grouped athletes within the validated 11 to 17-year-old range. It was hypothesized that 8 to 10-year-olds would display different normalized YBT distances compared to 11 to 17-year-olds. Study Design Cross-sectional Study. Methods Patients (N=1093) aged 8 to 17 who presented to a pediatric sports medicine practice with a lower-extremity injury and completed the YBT between December 2015-May 2021 were included. Anterior, posteromedial, and posterolateral YBT scores were collected at return-to-sport for affected and unaffected limbs. Scores were normalized to limb length, and composite scores were created. Between-limb differences were calculated in groups of ages 8-10, 11-12, 13-14, and 15-17. Groups were also evaluated for differences by sex. Results A rise in performance was observed in unaffected limb anterior reach from ages 8 to 10 years to 11 to 12 years followed by a subsequent significant decrease at older ages (p<0.001). Affected limb anterior reach differed between the youngest group and two oldest groups (p=0.004). Anterior and composite difference were significantly different between the oldest three groups (p=0.014 anterior; p=0.024 composite). No differences were observed between sexes in 8 to 10-year-olds, though 11 to 12-year-old females reached further during all eight distances. In the older three groups, males generally displayed greater between-limb differences. Conclusion YBT scores, specifically anterior reach, demonstrated inconsistency by age and sex across a large adolescent cohort. Existing return-to-sport standards should not be used with younger athletes, and individual validation is required. Level of Evidence Level III [ABSTRACT FROM AUTHOR]

Displacement is an important parameter for evaluating structural performance. However, the accurate measurement of global dynamic displacement remains a challenging task. To solve this problem, this paper proposes a global dynamic displacement reconstruction method for lattice tower structures, fusing limited acceleration and strain data. First, the strain-displacement mapping method for cantilever beams with variable cross-sections is presented and then extended to lattice towers. Thereafter, a modified multi-rate data fusion algorithm incorporating Kalman filtering and the proposed strain-displacement mapping methods is developed to fuse the acceleration and strain data to reconstruct the global dynamic displacement of the tower. The numerical simulation, model test and full-scale test demonstrate that the reconstructed dynamic displacements using the proposed method agree well with the reference values in both the time and frequency domains, and the parametric analysis has also been carried out, exhibiting great robustness and high reconstruction accuracy. [ABSTRACT FROM AUTHOR]

Premature ventricular contraction (PVC) is one of the most common arrhythmias, originating from ectopic beats in the ventricles. Precision in localizing the origin of PVCs has long been a focal point in electrophysiology research. Machine learning (ML) has developed rapidly in the past two decades with increasingly widespread applications. With the increase of clinical data such as electrocardiograms (ECGs), computed tomography (CT), and magnetic resonance imaging (MRI), ML and its subfields, deep learning (DL), have become powerful analytical tools, playing an increasingly important role in electrophysiological research. In this review, we mainly provide an overview of the development of ML in the localization of PVC origins, including its applications, advantages, disadvantages, and future research directions. This information is intended to serve as a reference for clinicians and researchers, aiding them in better‐utilizing ML techniques for the diagnosis and study of PVC origins. [ABSTRACT FROM AUTHOR]

Objectives: We aimed to determine the predictors of maximum bite force (MBF), as measured with the Innobyte system, and to assess the reliability and reference values for MBF in young adults with natural dentitions. Methods: This cross-sectional test–retest study included 101 dental students with natural dentitions. Participants had their dental occlusion examined and completed three questionnaires: the Temporomandibular disorders Pain Screener, Oral Behavior Checklist, and Jaw Functional Limitation Scale. Body mass index and muscle mass percentage were determined, and handgrip strength was measured with a dynamometer. The MBF was measured with Innobyte, with reliability assessed by the intraclass correlation coefficient, expressing reference values as MBF percentiles. Bivariate tests and multiple linear regression models were used for statistical analysis. Results: The intraclass correlation coefficient for the MBF was 0.90, with 10th to 90th percentiles of 487–876 N for females and 529–1003 N for males. A positive relationship existed between the MBF and male sex, muscle mass percentage, overbite, handgrip strength, and possible sleep/awake bruxism. Stepwise regression showed that overbite, handgrip strength, and possible sleep/awake bruxism had the greatest effect on the MBF, explaining 27% of the variation. Conclusions: This study provides reference values for MBF when using the Innobyte system and shows excellent reliability. Overbite, general strength, and self-reported bruxism appear to be important predictors of MBF. Clinical relevance: Innobyte is a reliable device that can be used to measure MBF bilaterally. Self-reported bruxism is associated with an 8%–10% increase in MBF. [ABSTRACT FROM AUTHOR]

Blood properties influence aerobic exercise performance. While vascular volumes and hemoglobin mass (Hbmass) are elevated in trained individuals, evidence of sex differences in vascular volumes is equivocal due to inadequate matching of aerobic fitness between males and females. This cross-sectional study aimed to compare hematological values normalized to body mass (BM) and fat-free mass (FFM) between males (n = 45) and females (n = 34) matched for aerobic fitness (V̇O2max) normalized to FFM (mL∙kg FFM−1∙min−1). Data included body composition measured by dual-energy X-ray absorptiometry (DXA), V̇O2max from an incremental test, and hematological values derived from a CO rebreathe test. Fat mass was unrelated to blood volume (BV; R2 = 0.02, P = 0.26) and Hbmass (R2 = 0.03, P = 0.16), while FFM was the strongest predictor of both (R2 = 0.75 and R2 = 0.83, respectively, P < 0.001). Females exhibited higher FFM-normalized BV (+4%, P < 0.05) and plasma volume (PV) (+14%, P < 0.001) and lower red blood cell volume (RBCV) (−8%, P < 0.001) and Hbmass (−8%, P < 0.001) compared to males. Positive correlations between aerobic fitness and relative Hbmass and BV were observed in both sexes when normalized to BM and FFM (0.48 < r < 0.71; P < 0.003). Stepwise multiple regression models, including FFM, V̇O2max, height, and [Hb], provided accurate predictions of Hbmass (R2 = 0.91) and BV (R2 = 0.85). Overall, sex differences persist in relative Hbmass, BV, PV, and RBCV after matching of aerobic fitness, though relative BV and PV were greater in females. These findings suggest sex-specific strategies in oxygen delivery and/or extraction, and they underscore the importance of carefully selecting normalization practices when assessing sex-based differences in hematological variables. [ABSTRACT FROM AUTHOR]

The Oswestry disability index (ODI) is widely utilized as a patient reported outcome (PRO) tool to assess patients presenting with low back pain (LBP) and following thoracolumbar spine surgery. No primary study has calculated the baseline range of ODI values in the diverse American population. Establishing age-adjusted normative values for ODI in the American population is crucial for assessing the utility of treatment strategies. The purpose of this study is to describe the baseline range of functional low back disability as measured by the ODI in an American population. Cross-sectional observational study. A total of 1214 participants were recruited from the United States in January 2024 using a combination of the Connect and PrimePanel platforms by CloudResearch to complete a survey administered on a RedCap online database. The survey consisted of 10 demographic questions and the 10 ODI survey questions. The distribution of the survey was designed to obtain approximately 100 respondents in each of the following age groups: 18–29, 30 to 39, 40 to 49, 50 to 59, 60 to 69, 70 to 79, and 80 to 89. The distribution of the sample was similarly designed to match the United States Census racial data with 78.1% White, 13.9% Black, and 7.9% other. Oswestry disability index (ODI). A crowd-sourcing platform called Cloudresearch was used to collect a representative sample of the US population by answering questions of the Oswestry disability questionnaire (ODQ), a 10-question survey. The final sample size was 797 participants including 386 (48.4%) males and 411 (51.6%) females; 169 participants were excluded that did not complete the survey and an additional 248 were excluded for failing attention check questions. The overall mean ODI score for the combined age groups was 14.35 (95% CI [13.33, 15.37]). The mean ODI scores increased with age, with the highest mean ODI in ages 70 to 79 at 18.0 (95% CI [14.76, 21.24]). Female participants reported higher mean ODI scores than their male counterparts in the 18 to 29 age group (p=.01), 50 to 59 age group (p=.01), and 60 to 69 age group (p=.02). Additionally, a weak positive correlation was found between Body Mass Index (BMI) and ODI scores (r = 0.22, p<.001). Our findings demonstrate a clear trend of increased disability with age. This study describes the baseline range of functional low back pain disability in the United States population. By defining these parameters, healthcare professionals can better tailor age and sex-specific interventions to manage disability in the aging US population, ultimately improving patient care and both operative and nonoperative treatment plans for LBP-related thoracolumbar pathology. [ABSTRACT FROM AUTHOR]

Many influencing factors should be considered in the selection of deep foundation pit supporting scheme. And the impact of different factors on supporting scheme is difficult to measure. There is a grey correlation between many influencing factors and the selection of supporting schemes. In this paper, the multi-objective fuzzy grey relation projection method can be obtained by weighting method and used to select the support of foundation pit. Therefore, a set of corresponding evaluation indexes of deep foundation pit support is put forward and the weight of each evaluation index is given. Then the weight is brought into the multi-objective fuzzy grey relation projection method to select the supporting mode of foundation pit. This method is applied to the selection of the supporting mode of the foundation pit of sand-pebble station, and the optimal supporting mode is obtained. The results is as follows : (1) It is effective to select the supporting scheme of foundation pit by fuzzy grey relational projection method. (2) The evaluation index of deep foundation pit supporting is reasonable. (3) It is of certain reference value to adopt bored pile + steel support method for sandy pebble foundation pit. [ABSTRACT FROM AUTHOR]

This paper presents a novel method of treating high water content dredged slurry by vacuum pre-pressure using woven rice straw as horizontal drainage boards (SHDs). This not only helps to avoid the impact of plastic drainage boards on the environment, but also helps to utilize agricultural related waste. The study aimed to investigate the effect of SHDs degradation on the vacuum transfer within the horizontal drainage boards and the consolidation characteristics of dredged slurry. Indoor vacuum preloading model tests were conducted to investigate soil settlement, straw degradation, vacuum variation and water content distribution within the drainage board. The results show that SHDs can significantly improve the consolidation of dredged slurry. The closer the straw is to the interface between the drainage board and the vacuum pipe, the greater the degree of degradation. The water content was distributed with depth in an oblique "z" shape, while a point with higher water content existed at 1/3 of the soil above the drainage boards. In addition, the low water content zone around the drainage board shows an elliptical shape due to the influence of gravity. These research results have some reference value for the ecological treatment of dredged slurry and straw. [ABSTRACT FROM AUTHOR]

Purpose: Swallowing disorders are highly interrelated with increased morbidity and mortality rates; therefore, early detection is crucial. Most screening tools rely on subjective observation, thus making objective assessment tools more vital. Timed Water Swallowing Test (TWST) is a screening tool used in the field providing quantitative data. This study aimed to investigate the swallowing parameters in a wide age range by using TWST and to expand the already existing normative data pool accordingly. It is also aimed to examine the reliability of the TWST and assess its validity in stroke survivors. Materials and methods: This study had a cross-sectional design. TWST carried out simultaneously along with surface EMG and laryngeal sensor on 196 healthy subjects aged 10 to 80 for normative data. Also, TWST carried out 30 patients having a history of recent stroke. Test-retest and inter-rater scoring analysis were used for reliability purposes, while Gugging Swallowing Screen (GUSS) test was used for validity purposes. Additionally, the correlations between the participants' TWST scores and GUSS scores were examined using the Spearman correlation coefficient. Results: The normative TWST data of healthy participants are tabulated and presented and their average swallowing capacity was found 13.73 ml/s. Furthermore, the mean swallowing capacity of stroke survivors was found 4.61 ml/s. As a result of validity analyses, a statistically strong and significant relationship was found between GUSS and TWST parameters (r = 0.775, p < 0.001). Intraclass correlation coefficient (ICC) and correlation values were found between moderate to good agreement between test-retest measurement (ICC = 0.563 to 0.891, p < 0.05). Also, the agreement between the raters was found to be significant (ICC = 0.949 to 0.995, p < 0.05). Conclusion: TWST is a valid and reliable screening tool to evaluate dysphagia on given population. Although the test's performance on healthy individuals is adequate, more research is still needed to confirm that it can be used as a screening tool for stroke. [ABSTRACT FROM AUTHOR]

Objective: There is an increasing focus on understanding health disparities among various cultural groups in the United States. The need for heterogeneity in norms and test stimuli across ethnically diverse individuals are being increasingly recognized. However, to date it remains unknown whether and to what extent differences in cognitive norms and tests exist in Asian Indians, a fast-growing population in the U.S. It is essential to understand these differences to improve diagnostic accuracy and provide timely and appropriate clinical care. Method: In this study, we conducted a scoping review of available cognitive tests that were normed, developed, or adapted for Asian Indians living in the U.S. Results: The results suggested a paucity of norms and tests specifically examining cognition in this community. Conclusions: Based on the findings, we provide suggestions for research directions focusing on the development of culturally sensitive neuropsychological tools, normative data representative of this demographic, and interventions addressing healthcare access barriers. Overall, this review provides readers with relevant clinical information to immediately enhance patient care as well as provide actionable items in research to improve the future utility of neuropsychology for Asian Indians in the United States. [ABSTRACT FROM AUTHOR]

Purpose: Recently, bail-out cholecystectomy (BOC) during laparoscopic cholecystectomy to avoid severe complications, such as vasculobiliary injury, has become widely used and increased in prevalence. However, current predictive factors or scoring systems are insufficient. Therefore, in this study, we aimed to test the validity of existing scoring systems and determine a suitable cutoff value for predicting BOC. Methods: We retrospectively assessed 305 patients who underwent laparoscopic cholecystectomy and divided them into a total cholecystectomy group (n = 265) and a BOC group (n = 40). Preoperative and operative findings were collected, and cutoff values for the existing scoring systems (Kama's and Nassar's) were modified using a prospectively maintained database. Results: The BOC rate was 13% with no severe complications. A logistic regression analysis revealed that the Kama's score (odds ratio, 0.93; 95% confidence interval 0.91–0.96; P < 0.01) was an independent predictor of BOC. A cutoff value of 6.5 points gave an area under the curve of 0.81, with a sensitivity of 87% and a specificity of 67%. Conclusions: Kama's difficulty scoring system with a modified cutoff value (6.5 points) is effective for predicting BOC. [ABSTRACT FROM AUTHOR]

Antegrade cardioplegia is routinely given during cardiac surgery. The delivery of antegrade cardioplegia from the cardiopulmonary bypass machine has many variables. Many perfusionists rely exclusively on cardioplegia system pressure to ensure safe antegrade delivery. Our group reviewed antegrade cardioplegia delivery in 50 patients undergoing coronary artery bypass graft. The data collected included the cardioplegia system pressure and the patient's direct aortic root pressure. The analysis of the data found weak correlation between the two pressures with a large mean difference and a wide standard deviation. The results suggest the direct measurement of aortic root pressure as guidance to antegrade cardioplegia instead of relying solely on cardioplegia system pressure. [ABSTRACT FROM AUTHOR]

Neutropenic sepsis (NS) is one of the leading causes of death among patients with hematologic malignancies. Identifying its predictive factors is fundamental for early detection. Few studies have evaluated the predictive factors in relation to microbial infection confirmation, which is clinically important for initiating sepsis treatment. This study aimed to determine whether selected biomarkers (i.e., body temperature, C-reactive protein, albumin, procalcitonin), treatment-related characteristics (i.e., diagnosis, duration of neutropenia, treatment modality), and infection-related characteristics (i.e., infection source, causative organisms) can predict NS in patients with hematologic malignancies. We also aimed to identify the optimal predictive cutoff points for these parameters. This retrospective case–control study used the data from a total of 163 patients (58 in the sepsis group and 105 in the non-sepsis group). We collected data with reference to the day of specimen collection, with which microbial infection was confirmed. Multiple logistic regression was used to determine predictive risk factors and the area under the curve (AUC) of the receiver operating characteristic for the optimal predictive cutoff points. The independent predictors of NS were average body temperature during a fever episode and procalcitonin level. The odds for NS rose by 9.97 times with every 1°C rise in average body temperature (95% confidence interval, CI [1.33, 75.05]) and by 2.09 times with every 1 ng/mL rise in the procalcitonin level (95% CI [1.08, 4.04]). Average body temperature (AUC = 0.77, 95% CI [0.68, 0.87]) and procalcitonin levels (AUC = 0.71, 95% CI [0.59, 0.84]) have fair accuracy for predicting NS, with the optimal cutoff points of 37.9°C and 0.55 ng/mL, respectively. This study found that average body temperature during a fever episode and procalcitonin are useful in predicting NS. Thus, nurses should carefully monitor body temperature and procalcitonin levels in patients with hematologic malignancies to detect the onset of NS. [ABSTRACT FROM AUTHOR]

Satellite-based exposure of fine particulate matters has been seldom used as a predictor of mortality. PM2.5 was predicted using Aerosol Optical Depths (AOD) through a two-stage regression model. The predicted PM2.5 was corrected for the bias using two approaches. We estimated the impact by two different scenarios of PM2.5 in the model. We statistically found different distributions of the predicted PM2.5 over the region. Compared to the reference value (5 µg/m3), 90th and 95th percentiles had significant adverse effect on total mortality (RR 90th percentile:1.45; CI 95%: 1.08–1.95 and RR 95th percentile:1.53; CI 95%: 1.11–2.1). Nearly 1050 deaths were attributed to any range of the air pollution (unhealthy range), of which more than half were attributed to high concentration range. Given the adverse effect of extreme values compared to the both scenarios, more efforts are suggested to define local-specific reference values and preventive strategies. [ABSTRACT FROM AUTHOR]

Background: Inter‐assay variation between different immunoassays and different mass spectrometry methods hampers the biochemical confirmation of male hypogonadism. Furthermore, some laboratories utilise assay manufacturer reference ranges that do not necessarily mirror assay performance characteristics, with the lower limit of normality ranging from 4.9 nmol/L to 11 nmol/L. The quality of the normative data underlying commercial immunoassay reference ranges is uncertain. Design: A working group reviewed published evidence and agreed upon standardised reporting guidance to augment total testosterone reports. Results: Evidence‐based guidance on appropriate blood sampling, clinical action limits, and other major factors likely to affect the interpretation of results are provided. Conclusions: This article aims to improve the quality of the interpretation of testosterone results by non‐specialist clinicians. It also discusses approaches for assay harmonisation which have been successful in some but not all healthcare systems. [ABSTRACT FROM AUTHOR]

• In our study, cerebral fissure measurements of healthy fetuses between 20–24 weeks of gestation were obtained. • Normal reference values were determined for these anatomical structures, which are closely related to fetal cortical development. • All four main fissures examined in our study were found to enlarge with advancing gestational age. • The reference intervals we obtained will be helpful for clinicians interested in neurosonography. • Cerebral fissure measurements may provide additional information about actual gestational age and cortical maturation. We aimed to establish normal reference ranges for insula, sylvian fissure (SF), parieto-occipital fissure (POF), and calcarine fissure (CF) measured by prenatal ultrasonography (USG) between 20–24 weeks of gestation in healthy fetuses. A total of 186 fetuses in the second trimester were evaluated by transabdominal USG. All measurements were obtained by a single clinician. The study was divided into four subgroups (Group A: 20–20 weeks six days, Group B: 21–21 weeks six days, Group C: 22–22 weeks six days, Group D: 23–23 weeks six days). Eight fetuses (4.23 %) between 20 and 21 weeks of gestation could not be included in the study because the sulcus borders could not be clearly evaluated. Measurements were obtained in all fetuses over 21 weeks of gestation. Reference ranges were obtained for insula, SF, POF, and CF in all fetuses and subgroups. At 20 and 23 weeks and six days gestation, mean insula depth was 14.96 ± 1.62 mm (min 11.0 mm − max 18.9 mm), mean SF depth was 6.96 ± 1.35 mm (min 3.6 mm − max 10.0 mm), mean POF depth was 2.05 ± 0.66 mm (min 1.1 mm − max 5.6 mm) and mean CF depth was 2.42 ± 0.68 mm (min 1.5 mm − 6.1 mm). There was a correlation between the cerebellum and cisterna magna and all fissure depths. Our nomograms of healthy fetuses may be helpful in the early detection of cortical maturation abnormalities. [ABSTRACT FROM AUTHOR]

Aim: The aim of this study is to interpret plasma renin concentrations (PRCs) correctly in a clinical setting, it is essential to understand to what extent physical activity influences the concentration. Reference values for different postural positions exist for adults, but data for children are sparse. In this study, the effect of 30 min of rest on plasma renin concentrations in paediatric patients was examined. Methods: In total, 41 paediatric patients, undergoing either arginine or clonidine provocation tests for growth hormone deficiency, were included. For each stimulation test, two blood samples were drawn. One at time 0 min and one after 30 min of rest. In total, renin concentrations were determined in 86 serum samples. Results: Renin concentrations decreased from 0 to 30 min with a median value of −20.5% (inter‐quartile range: −33.0% to −12.8%). This decrease was not dependent on sex, age, medication or comorbidity, and the variance of renin did not differ between 0 and 30 min. Conclusion: Renin concentrations in children differ according to postural position, which is comparable to adults. Thus, the clinical interpretation of renin results needs to consider the preanalytical conditions applied in the local reference population. [ABSTRACT FROM AUTHOR]

The article presents a case study of a 4-month-old infant who presented to the emergency department with diarrhea, irritability, and poor reactions. Topics discussed include the infant's clinical symptoms and examination findings, abnormal laboratory results indicating metabolic disturbances, and the implications of the patient's premature birth on her overall health status.

Purpose: Scoliosis is a complex spine deformity with direct functional and cosmetic impacts on the individual. The reference standard for assessing scoliosis severity is the Cobb angle which is measured on radiographs by human specialists, carrying interobserver variability and inaccuracy of measurements. These limitations may result in lack of timely referral for management at a time the scoliotic deformity progression can be saved from surgery. We aimed to create a machine learning (ML) model for automatic calculation of Cobb angles on 3-foot standing spine radiographs of children and adolescents with clinical suspicion of scoliosis across 2 clinical scenarios (idiopathic, group 1 and congenital scoliosis, group 2). Methods: We retrospectively measured Cobb angles of 130 patients who had a 3-foot spine radiograph for scoliosis within a 10-year period for either idiopathic or congenital anomaly scoliosis. Cobb angles were measured both manually by radiologists and by an ML pipeline (segmentation-based approach—Augmented U-Net model with non-square kernels). Results: Our Augmented U-Net architecture achieved a Symmetric Mean Absolute Percentage Error (SMAPE) of 11.82% amongst a combined idiopathic and congenital scoliosis cohort. When stratifying for idiopathic and congenital scoliosis individually a SMAPE of 13.02% and 11.90% were achieved, respectively. Conclusion: The ML model used in this study is promising at providing automated Cobb angle measurement in both idiopathic scoliosis and congenital scoliosis. Nevertheless, larger studies are needed in the future to confirm the results of this study prior to translation of this ML algorithm into clinical practice. [ABSTRACT FROM AUTHOR]

In this paper, the impact of the inductive peaking bandwidth enhancement technique on the input-referred noise performance of a 10 Gbps optical receiver, which includes the CMOS Regulated Cascode (RGC) Transimpedance Amplifier (TIA) is investigated and analyzed. By examining the noise equations in this paper, a novel low-noise design methodology, is introduced. Additionally, through the implementation of the structured g m / I D approach and by selecting the suitable transistor dimensions, the power consumption as well as the noise values are reduced, while the values of the obtained gain and bandwidth are increased. To verify the performance of the designed TIA, the circuit is simulated in HSPICE using 90 nm CMOS technology parameters. The simulation results show the obtained gain value of 55.45 dBΩ, a bandwidth of 7.51 GHz and an input referenced noise value of 15.7 pA/√Hz at the 1.2 V power supply, while the circuit consumes 0.75 mW of power. [ABSTRACT FROM AUTHOR]

Background: This study was designed to evaluate the diagnostic efficacy of the minimum fascia‐tumour distance (MFTD) in distinguishing deep‐lobe benign parotid tumours from superficial‐lobe tumours through both an original study and a meta‐analysis. Methods: In this study, we performed a retrospective analysis of data from 91 patients who had been diagnosed with benign parotid tumours. The MFTD values were sourced from preoperative ultrasound examinations. The locations of these tumours were confirmed through surgical findings. We assessed the diagnostic accuracy of MFTD by utilising receiver operating characteristic (ROC) curves. Additionally, we conducted a systematic review of the pertinent literature and performed a diagnostic meta‐analysis to ascertain the overall diagnostic efficacy of MFTD in identifying benign parotid tumours. Results: Patients with tumours in the deep lobe had a significantly greater MFTD than patients with tumours in the superficial lobe. Using a cutoff value of 3.50 mm for MFTD, we found an AUC of 0.93, a sensitivity of 81.8%, and a specificity of 98.8%. Our meta‐analysis included seven studies covering a total of 1689 tumours. The pooled values for sensitivity, specificity, and diagnostic odds ratio (OR) of MFTD were 81.0%, 89.0%, and 32.2, respectively. The AUC of the summarised ROC curve of MFTD was 0.90. Conclusion: The MFTD demonstrated reliable diagnostic accuracy in identifying deep‐lobe benign parotid tumours and may be incorporated into standard evaluations before parotidectomy. [ABSTRACT FROM AUTHOR]

Oxygen vacancy is the key contributing to the rapid bonding in flash joining. Prior to this study, the specific formation process of oxygen vacancy and its influencing factors have not been systematically investigated. In this work, the based materials yttrium oxide and Ti are phased observed during the incubation stage and the flash stage of flash joining. Three periods are summarized to reveal the whole process and variation in oxygen vacancy generation, electron binding, and metal filling. Following the stable stage, the factors impacting the oxygen vacancy are systematically studied and characterized to quantify their contribution. These factors include bonding temperature, current density, joining time, furnace atmosphere, and electric field direction. These findings have significant implications for precisely controlling the strength of the transparent/metal flash joint, meanwhile, may have reference value for universal flash joining. [ABSTRACT FROM AUTHOR]

A previous study that evaluated the ability of the Bender Gestalt Test (BGT) to discriminate between dementia with Lewy bodies (DLB) and Alzheimer's disease (AD) suggested that a total score of 98 is the optimal cutoff value for discriminating between these two diseases and that DLB tends to exhibit unique errors; i.e., "element deformation" and "gestalt destruction." The objectives of the present study were: (1) to examine the sensitivity and specificity of a total BGT score of 98 as a cutoff value in greater numbers of DLB patients than in the previous study, (2) to set a new cutoff value if a cutoff value of 98 is not optimal, and (3) to clarify the frequency of element deformation and gestalt destruction in DLB patients. The participants were 133 DLB patients, 65 AD patients, and 30 cognitively normal elderly people. All of the participants underwent the Mini-Mental State Examination, BGT, and brain magnetic resonance imaging. As a result, the total BGT score cutoff value of 98 showed low sensitivity (0.58), and a cutoff value of 84 was indicated to be the optimal cutoff value for discriminating between DLB and AD. In addition, 32 out of 133 DLB patients and one out of 65 AD patients exhibited element deformation or gestalt destruction. This study suggested that the BGT is a useful neuropsychological test for differentiating DLB from AD. In addition, the need to evaluate the spatial and perceptual difficulties of DLB patients with various types of visual stimulation is also discussed. [ABSTRACT FROM AUTHOR]

For the last 4 decades, concrete bridges have benefited from larger diameter prestressing strands, which have increased from 13 to 15 mm in diameter and are now the standard in the US. The largest commercially available strands in the US are 7-wire–18-mm-diameter strands, but they are not used as often despite researchers finding that they can provide longer spans and lighter structures. This research seeks to experimentally benchmark the bond of 28.6-mm-diameter grade 1780 prestressing strands to normal-weight concrete and mortar for the first time. The large-block pullout test (LBPT), the North American strand producer test (NASP), and concentrically reinforced prism (CRP) pullout test were conducted to quantify the pullout force of these strands when they were embedded in concrete as well as to determine an experimental reference value. The results showed that the strands exhibit adequate bonding to the concrete when implementing the LBPT, NASP, and CRP tests to evaluate them in combination with extrapolated values from the literature using a ratio of strand diameters. Furthermore, CRP tests indicated that the transfer length would likely be approximately 1,200 mm and the development length between 1,800 and 2,400 mm for 58-MPa concrete. It was also determined that due to their much larger surface area, the bond stress of these large-diameter strands was lower than that of 13-, 15-, and 18-mm-diameter strands for similar case scenarios of bond evaluation or transfer length estimation using prisms. However, there is limited information for comparison, and the testing program presented is the only one of its kind for this strand size. [ABSTRACT FROM AUTHOR]

Accurate analysis of the deformation characteristics and the damage destruction mechanism of a rock mass is a prerequisite for the evaluation of the stability of the surrounding rock in tunnel engineering. This paper proposes a combination of numerical simulation techniques based on microstructure analysis and physical model experimental methods, which allows for the microscale interpretation of macroscale experimental phenomena and provides new insights for further summarizing the instability and failure patterns of rocks under unloading paths. To investigate the macroscopic and microscopic failure mechanisms as well as the damage deterioration patterns of granite under unloading conditions, physical model tests were conducted using stress paths of conventional triaxial and constant axial pressure unloading confining pressure. The experiments encompassed unloading paths, and the associated mechanical responses were finely simulated using the particle flow code method coupled with digital image processing techniques. The results reveal that at lower unloading rates, granite predominantly undergoes shear failure, with the destabilizing mechanism attributed to the formation of an "X"-shaped conjugate failure surface under the influence of tension–shear coupling. As the unloading rate increases, tensile forces progressively take precedence, leading to more pronounced brittle failure characteristics in granite. The ratio of the confining pressure reduction to the initial confining pressure at the point of specimen failure increases with the unloading rate and decreases with the initial confining pressure. Faster unloading rates correspond to a more rapid increase in Poisson's ratio, and the unloading path primarily influences the lateral strain variation during the initial stages of unloading. Additionally, under unloading conditions, the internal friction angle of granite increases, while the cohesion decreases. The impact of unloading rate and path on cohesion becomes more pronounced. The findings of this research have certain reference value for further optimizing the methods for assessing the stability of rock masses surrounding tunnels. [ABSTRACT FROM AUTHOR]

To investigate the long-term outcome of pediatric mild traumatic brain injury (mTBI) in terms of neurocognitive, behavioral, and school functioning and to identify clinical risk factors for adverse outcomes. This study describes the follow-up of a prospective multicenter sample of 89 children with mTBI 3.6 years postinjury and 89 neurologically healthy children matched for sex, age, and socioeconomic status. Neurodevelopmental outcomes were assessed using an intelligence test, behavioral questionnaires, computerized neurocognitive tests, and longitudinal (pre- and postinjury) standardized school performance data. Children with mTBI exhibited intelligence in the average range but had more behavioral problems related to inattentiveness (P = 0.004, d = 0.47) and hyperactive impulsivity (P = 0.01, d = 0.40) and showed poorer neurocognitive performance in information processing stability (P = 0.003, d = −0.55) and Visual Working Memory (P = 0.04, d = −0.39) compared with matched peers. Longitudinal school performance data revealed poorer performance in Technical Reading up to two years postinjury (P = 0.005, d = −0.42) when compared with normative data. Clinical risk factors did not reveal predictive value for adverse outcomes in children with mTBI. This study indicates that children with mTBI are at risk of long-term deficits in neurocognitive and behavioral functioning, with longitudinal evidence suggesting shortfalls in school performance up to two years postinjury. Clinical risk factors do not provide a solid basis for long-term neurodevelopmental prognosis. Findings emphasize the importance of, and challenges for, early identification of children at risk for adverse neurodevelopmental outcome after mTBI. [ABSTRACT FROM AUTHOR]

In high-temperature and high-salinity (HTHS) reservoirs, the performance of chemicals used in enhanced oil recovery (EOR) technology will be significantly affected by the temperature and salinity of formation water, resulting in the ineffective effect of chemicals. To solve the problem of low recovery in HTHS reservoirs, a new foam J4F6 was prepared. First of all, seven kinds of surfactant with good foam performance were selected on the base of widely used surfactants. Then matched the quality proportion of surfactant following the design, under the same conditions to evaluate their foaming performance and the ability to reduce the interfacial tension (IFT), J4F6 with the best performance was selected and then the concentration, NaCl, and Ca2+, temperature, aging time, and adsorption loss on the foaming performance were investigated. Finally, a sandpack flooding experiment was carried out to study the flow characteristics and resistance factor (RF) of J4F6. The results showed that J4F6 has the high strength adjustment and flooding ability of traditional foam. In addition, it has strong temperature and salt resistance, which can greatly improve the swept zone and oil displacement efficiency of HTHS reservoir and enhance oil recovery. This study can provide a reference value for EOR of HTHS reservoir. [ABSTRACT FROM AUTHOR]

Copyright of Monatsschrift Kinderheilkunde is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Technisches Messen is the property of De Gruyter and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Chinese Journal of Inorganic Analytical Chemistry / Zhongguo Wuji Fenxi Huaxue is the property of Beijing Research Institute of Mining & Metallurgy Technology Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Trans/Form/Ação is the property of Trans/Form/Acao and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background Establishing local trimester-specific reference intervals for gestational TSH and free T4 (FT4) is often not feasible, necessitating alternative strategies. We aimed to systematically quantify the diagnostic performance of standardized modifications of center-specific nonpregnancy reference intervals as compared to trimester-specific reference intervals. Methods We included prospective cohorts participating in the Consortium on Thyroid and Pregnancy. After relevant exclusions, reference intervals were calculated per cohort in thyroperoxidase antibody-negative women. Modifications to the nonpregnancy reference intervals included an absolute modification (per.1 mU/L TSH or 1 pmol/L free T4), relative modification (in steps of 5%) and fixed limits (upper TSH limit between 3.0 and 4.5 mU/L and lower FT4 limit 5-15 pmol/L). We compared (sub)clinical hypothyroidism prevalence, sensitivity, and positive predictive value (PPV) of these methodologies with population-based trimester-specific reference intervals. Results The final study population comprised 52 496 participants in 18 cohorts. Optimal modifications of standard reference intervals to diagnose gestational overt hypothyroidism were −5% for the upper limit of TSH and +5% for the lower limit of FT4 (sensitivity,.70, CI, 0.47-0.86; PPV, 0.64, CI, 0.54-0.74). For subclinical hypothyroidism, these were −20% for the upper limit of TSH and −15% for the lower limit of FT4 (sensitivity, 0.91; CI, 0.67-0.98; PPV, 0.71, CI, 0.58-0.80). Absolute and fixed modifications yielded similar results. CIs were wide, limiting generalizability. Conclusion We could not identify modifications of nonpregnancy TSH and FT4 reference intervals that would enable centers to adequately approximate trimester-specific reference intervals. Future efforts should be turned toward studying the meaningfulness of trimester-specific reference intervals and risk-based decision limits. [ABSTRACT FROM AUTHOR]

A sports auxiliary evaluation system suitable for China's national conditions was established using big data and sports identification technology. First of all, this paper extends the data of normative behavior and constructs a normative library of scores and comparisons. The acquisition of 3D data is emphasized. The method based on Fourier descriptors is used to locate the motion accurately. In this way, better gait recognition results can be obtained. The Fourier characteristics before and after wavelet transform are compared with the actual object characteristics, and the results show that the proposed algorithm can extract the features with high precision. This scheme can obtain a more accurate identification effect. The system proposed in this paper provides a powerful means for judges to score. [ABSTRACT FROM AUTHOR]

In order to solve the dynamic nonlinear problem of bridge loads and responses during ship collisions, a design method for bridge anti-collision structures based on nonlinear numerical simulation was proposed. The author describes in detail the entire process of collision force evolution, energy conversion, and plastic deformation of the anti-collision energy dissipator, and conducts a comprehensive simulation of it. The experimental results show that when a ship with a mass of 1000 tons collides forward at speeds of 1, 3, and 5 meters per second, the collision depth is 0.23, 1.46, and 3.95 meters, respectively, less than the maximum allowable collision depth of 4.3 meters, and the collision energy dissipator is still in the protective working state for the bridge pier. When a ship with a mass of 3000 tons collides with the collision avoidance energy dissipator at a speed of 3 or 5 meters per second, the collision depth exceeds the maximum allowable collision depth, and the collision avoidance energy dissipator fails, the ship will directly collide with the wharf. The plastic deformation of the anti-collision energy dissipator provided has important reference value for design. [ABSTRACT FROM AUTHOR]

The computer in mechanical and electrical equipment can now detect equipment faults through simulation thanks to the advancement of artificial intelligence (AI) technology, which makes it convenient to monitor mechanical and electrical equipment. This paper begins with a quick introduction to Agent and the Agent system, explains how Agent is applied in the current context, then analyzes the hierarchical fault diagnostic model, identifies its flaws, and suggests improvement techniques. To increase the model's accuracy and speed of operation, the contract net model and D-S (Dempster-Shafer) evidence theory are then incorporated. Finally, simulation experiments are used to confirm the accuracy and consistency of this model. According to the experimental findings, this optimization model runs at a pace that is noticeably faster than that of other models when subjected to the same workload, demonstrating the model's efficacy. Models 1, 2, and 3 are put side by side to demonstrate how clearly multi-task processing may cut down on the model's running time. In the second experiment, samples of mechanical and electrical equipment defect data are taken from two groups. The results of the comparative experiments demonstrate that the optimized model in this work can be reliable up to a maximum of 0.91 and a minimum of 0.63. It is demonstrated that the model in this work is rational by the fact that among the four types of fault prediction, the optimized model's reliability is significantly greater than the traditional model's. The research described in this publication therefore has some reference value for computer simulation of electromechanical equipment. [ABSTRACT FROM AUTHOR]

Purpose: In MR electrical properties tomography (MR‐EPT), electrical properties (EPs, conductivity and permittivity) are reconstructed from MR measurements. Phantom measurements are important to characterize the performance of MR‐EPT reconstruction methods, since they allow knowledge of reference EPs values. To assess reconstruction methods in a more realistic scenario, it is important to test the methods using phantoms with realistic shapes, internal structures, and dielectric properties. In this work, we present a 3D printing procedure for the creation of realistic brain‐like phantoms to benchmark MR‐EPT reconstructions. Methods: We created two brain‐like geometries with three different compartments using 3D printing. The first geometry was filled once, while the second geometry was filled three times with different saline‐gelatin solutions, resulting in a total of four phantoms with different EPs. The saline solutions were characterized using a probe. 3D MR‐EPT reconstructions were performed from MR measurements at 3T. The reconstructed conductivity values were compared to reference values of the saline‐gelatin solutions. The measured fields were also compared to simulated fields using the same phantom geometry and electrical properties. Results: The measured fields were consistent with simulated fields. Reconstructed conductivity values were consistent with the reference (probe) conductivity values. This indicated the suitability of such phantoms for benchmarking MR‐EPT reconstructions. Conclusion: We presented a new workflow to 3D print realistic brain‐like phantoms in an easy and affordable way. These phantoms are suitable to benchmark MR‐EPT reconstructions, but can also be used for benchmarking other quantitative MR methods. [ABSTRACT FROM AUTHOR]

Purpose: This study leverages externally generated Pilot Tone (PT) signals to perform motion‐corrected brain MRI for sequences with arbitrary k‐space sampling and image contrast. Theory and Methods: PT signals are promising external motion sensors due to their cost‐effectiveness, easy workflow, and consistent performance across contrasts and sampling patterns. However, they lack robust calibration pipelines. This work calibrates PT signal to rigid motion parameters acquired during short blocks (˜4 s) of motion calibration (MC) acquisitions, which are short enough to unobstructively fit between acquisitions. MC acquisitions leverage self‐navigated trajectories that enable state‐of‐the‐art motion estimation methods for efficient calibration. To capture the range of patient motion occurring throughout the examination, distributed motion calibration (DMC) uses data acquired from MC scans distributed across the entire examination. After calibration, PT is used to retrospectively motion‐correct sequences with arbitrary k‐space sampling and image contrast. Additionally, a data‐driven calibration refinement is proposed to tailor calibration models to individual acquisitions. In vivo experiments involving 12 healthy volunteers tested the DMC protocol's ability to robustly correct subject motion. Results: The proposed calibration pipeline produces pose parameters consistent with reference values, even when distributing only six of these approximately 4‐s MC blocks, resulting in a total acquisition time of 22 s. In vivo motion experiments reveal significant (p<0.05$$ p<0.05 $$) improved motion correction with increased signal to residual ratio for both MPRAGE and SPACE sequences with standard k‐space acquisition, especially when motion is large. Additionally, results highlight the benefits of using a distributed calibration approach. Conclusions: This study presents a framework for performing motion‐corrected brain MRI in sequences with arbitrary k‐space encoding and contrast, using externally generated PT signals. The DMC protocol is introduced, promoting observation of patient motion occurring throughout the examination and providing a calibration pipeline suitable for clinical deployment. The method's application is demonstrated in standard volumetric MPRAGE and SPACE sequences. [ABSTRACT FROM AUTHOR]

ABSTRACT Anomaly detection, vital for identifying deviations from normative data patterns, is particularly crucial in sensor‐driven real‐world applications, which predominantly involve temporal data in the form of time series. Traditional evaluation of anomaly detection methods has relied on public benchmark datasets. Yet, recent revelations have uncovered inherent flaws and inadequacies in these datasets, casting doubt on the perceived progress in the field. To address this challenge, the UCR Time Series Anomaly Archive has been recently proposed—a meticulously curated database comprising 250 time series—designed to provide a robust and error‐free benchmark for anomaly detection research. This paper comprehensively evaluates state‐of‐the‐art anomaly detection techniques using the UCR Time Series Anomaly Archive. Our findings demonstrate the efficacy of current methods in accurately detecting anomalies across an important portion of datasets without additional optimization, underscoring the archive's utility as a foundational baseline for future research and development in anomaly detection methodologies. [ABSTRACT FROM AUTHOR]

Ultrasonography with color Doppler is the most quantitative analysis method for intra-renal parameters. There is a wide variation between authors in the measurement site and referencing the inter-lobar resistivity index (RI) in felines. Our objective is to morphometrically and ultrasonographically investigate the normal renal dimensions and vasculatures and draw up a normal reference value for the renal inter-lobar artery resistivity index (RI) using a Pulsed wave-Doppler ultrasonography. A total of twelve adult domestic cats were sedated and treated according to IACUC regulation guidelines to be examined using Doppler ultrasound. The same cats were used for morphometric investigation and divided into three groups regarding the used technique. The size difference between the right and left kidneys is slight, measuring 17 g (weight), 3.65 ± 0.06 cm (length), 2.54 ± 0.08 cm (width), and 2.21 ± 0.03 cm (thickness) for the right kidney, and about 15 g, 3.42 ± 0.06 cm, 2.32 ± 0.05 cm, and 2.13 ± 0.03 cm for the left one, respectively. There are three patterns of renal arteries' point of origin. The mean RI values of both kidneys were 0.57 ± 0.08 (0.50–0.67) in the right kidney and 0.60 ± 0.08 (0.51–0.69) in the left kidney. The gross examination and ultrasonography measurements did not have a statistically different effect on the actual renal dimensions. Moreover, 0.69 is considered the standard resistivity index (RI) threshold of the feline inter-lobar artery with no correlation to the animal's body weight. [ABSTRACT FROM AUTHOR]