Search

Trends in the use of renewable energy sources to power buildings do not bypass objects for which maintaining a power supply is critical. This also applies to railway signal boxes. The aim of the research work was to test the multisource power supply system for a railway signal box with power electronic converter systems and a DC bus, built as part of the research project. The assumption for powering the railway signal box building was to use renewable sources, energy storage devices, and a 3 kV DC traction network as the second required power supply grid. Both power grids were connected by power electronic converters, and the power values of the converters were set based on the calculated power balance values using the values measured at the system nodes and the set constraints. The tests primarily tested the response of the power supply system to changes in load power and power generated by the photovoltaic source, as well as the charge level of the energy storage devices. The correctness of the control algorithm's operation was assessed based on the recorded power values in the power supply system nodes. The tests were carried out for 60 scenarios that covered all normal and emergency operating conditions. During the tests, delays in response to changes in the power supplied to the converters and the values of circular power flow between the power grid connections were recorded. The recorded delays ranged from 2 to about 50 s and the circular power flows did not exceed 1500 W. Based on the results of the tests, it was found necessary to improve the power measurement system in the power supply system nodes and to improve the quality of communication and the transmission time of measurement data transmission time. [ABSTRACT FROM AUTHOR]

Trends in the use of renewable energy sources to power buildings do not bypass objects for which maintaining a power supply is critical. This also applies to railway signal boxes. The aim of the research work was to test the multisource power supply system for a railway signal box with power electronic converter systems and a DC bus, built as part of the research project. The assumption for powering the railway signal box building was to use renewable sources, energy storage devices, and a 3 kV DC traction network as the second required power supply grid. Both power grids were connected by power electronic converters, and the power values of the converters were set based on the calculated power balance values using the values measured at the system nodes and the set constraints. The tests primarily tested the response of the power supply system to changes in load power and power generated by the photovoltaic source, as well as the charge level of the energy storage devices. The correctness of the control algorithm’s operation was assessed based on the recorded power values in the power supply system nodes. The tests were carried out for 60 scenarios that covered all normal and emergency operating conditions. During the tests, delays in response to changes in the power supplied to the converters and the values of circular power flow between the power grid connections were recorded. The recorded delays ranged from 2 to about 50 s and the circular power flows did not exceed 1500 W. Based on the results of the tests, it was found necessary to improve the power measurement system in the power supply system nodes and to improve the quality of communication and the transmission time of measurement data transmission time.

This study assessed hourly electricity consumption profiles in railway signal boxes located in Poland. The analyses carried out consisted of assessing the correlation among the hourly demand profile, weather indicators, and calendar indicators, e.g., temperature, cloud cover, day of the week, and month. The analysis allowed us to assess which indicator impacts the energy consumption profile and would be useful when forecasting energy demand. In total, 15 railway signal boxes were selected for analysis and grouped according to three characteristic repeatability profiles. On this basis, six of the signal boxes and one that did not fit into any of the groups were selected for further analysis. Four correlation research methods were selected for analysis: Pearson's method, Spearman's method, scatter plots, and distance covariance. The possibility of forecasting electricity consumption based on previously aggregated profiles and determining correlations with indicators was presented. The given indicators vary depending on the facility. Analyses showed different dependencies of the electricity demand profile. The ambient temperature and time of day have the greatest impact on the profile. Regarding the correlation with temperature, the results of the Pearson's and Spearman's coefficients ranged from approximately −0.4 to more than −0.8. The highest correlation coefficients were obtained when comparing the demand profile with the previous day. In this case, the Pearson's and Spearman's coefficients for all analysed objects range from approximately 0.7 to over 0.9. [ABSTRACT FROM AUTHOR]

This study assessed hourly electricity consumption profiles in railway signal boxes located in Poland. The analyses carried out consisted of assessing the correlation among the hourly demand profile, weather indicators, and calendar indicators, e.g., temperature, cloud cover, day of the week, and month. The analysis allowed us to assess which indicator impacts the energy consumption profile and would be useful when forecasting energy demand. In total, 15 railway signal boxes were selected for analysis and grouped according to three characteristic repeatability profiles. On this basis, six of the signal boxes and one that did not fit into any of the groups were selected for further analysis. Four correlation research methods were selected for analysis: Pearson’s method, Spearman’s method, scatter plots, and distance covariance. The possibility of forecasting electricity consumption based on previously aggregated profiles and determining correlations with indicators was presented. The given indicators vary depending on the facility. Analyses showed different dependencies of the electricity demand profile. The ambient temperature and time of day have the greatest impact on the profile. Regarding the correlation with temperature, the results of the Pearson’s and Spearman’s coefficients ranged from approximately −0.4 to more than −0.8. The highest correlation coefficients were obtained when comparing the demand profile with the previous day. In this case, the Pearson’s and Spearman’s coefficients for all analysed objects range from approximately 0.7 to over 0.9.