Search

Application deployment of 3D-printed products represents a progressive area of industrial use of specific metal alloys. In parallel with starting points based on mechanical characteristics in the static and cyclic areas, dilation behavior is an important parameter. A typical application is, for example, components in the aerospace sector, where the components are exposed for a short period to a significant temperature difference in both positive and negative values. Current industrial trends lead to the deployment of additive technologies for producing aircraft system components and instrument parts. Testing of AlSi10Mg alloy samples prepared by direct metal laser sintering, in the past DMLS, now according to the standard laser powder bed fusion (PBF-LB/M) method, is carried out by measuring dilation during a controlled temperature course. The AlSi10Mg alloy is used for mechanically less stressed components, from which a high accuracy of functional dimensions is usually required, which can be affected by dilation characteristics in a wide temperature range. Additively produced components have different dilation characteristics within an identical alloy, often dependent on the production method and orientation during 3D printing. The article presents the testing results and subsequent application characteristics of an additively produced aluminum alloy, considering dilation characteristics. [ABSTRACT FROM AUTHOR]

Application deployment of 3D-printed products represents a progressive area of industrial use of specific metal alloys. In parallel with starting points based on mechanical characteristics in the static and cyclic areas, dilation behavior is an important parameter. A typical application is, for example, components in the aerospace sector, where the components are exposed for a short period to a significant temperature difference in both positive and negative values. Current industrial trends lead to the deployment of additive technologies for producing aircraft system components and instrument parts. Testing of AlSi10Mg alloy samples prepared by direct metal laser sintering, in the past DMLS, now according to the standard laser powder bed fusion (PBF-LB/M) method, is carried out by measuring dilation during a controlled temperature course. The AlSi10Mg alloy is used for mechanically less stressed components, from which a high accuracy of functional dimensions is usually required, which can be affected by dilation characteristics in a wide temperature range. Additively produced components have different dilation characteristics within an identical alloy, often dependent on the production method and orientation during 3D printing. The article presents the testing results and subsequent application characteristics of an additively produced aluminum alloy, considering dilation characteristics.

The presented text deals with research into the influence of the printing layers' orientation on crack propagation in an AlSi10Mg material specimen, produced by additive technology, using the Direct Metal Laser Sintering (DMLS) method. It is a method based on sintering and melting layers of powder material using a laser beam. The material specimen is presented as a Compact Tension test specimen and is printed in four different defined orientations (topology) of the printing layers—0°, 45°, 90°, and twice 90°. The normalized specimen is loaded cyclically, where the crack length is measured and recorded, and at the same time, the crack growth rate is determined. The evaluation of the experiment shows an apparent influence of the topology, which is essential especially for possible use in the design and technical preparation of the production of real machine parts in industrial practice. Simultaneously with the measurement results, other influencing factors are listed, especially product postprocessing and the measurement method used. The hypothesis of crack propagation using Computer Aided Engineering/Finite Element Method (CAE/FEM) simulation is also stated here based on the achieved results. [ABSTRACT FROM AUTHOR]