Search

Over the last few years, employment of the standard silicon microfabrication techniques for the gas sensor technology has allowed for the development of ever-small, low-cost, and low-power consumption devices. Specifically, the development of silicon microheaters (MHs) has become well established to produce MOS gas sensors. Therefore, the development of predictive models that help to define a priori the optimal design and layout of the device have become crucial, in order to achieve both low power consumption and high mechanical stability. In this research dataset, we present the experimental data collected to develop a specific and useful predictive thermal-mechanical model for high performing silicon MHs. To this aim, three MH layouts over three different membrane sizes were developed by using the standard silicon microfabrication process. Thermal and mechanical performances of the produced devices were experimentally evaluated, by using probe stations and mechanical failure analysis, respectively. The measured thermal curves were used to develop the predictive thermal model towards low power consumption. Moreover, a statistical analysis was finally introduced to cross-correlate the mechanical failure results and the thermal predictive model, aiming at MH design optimization for gas sensing applications. All the data collected in this investigation are shown.

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in the substrate production process has been achieved, thanks to the advances in micro- and nanofabrication for micro-electro-mechanical system (MEMS) technologies. In addition, the use of innovative materials and smaller low-power consumption silicon microheaters led to the development of high-performance gas sensors. Various heater layouts were investigated to optimize the temperature distribution on the membrane, and a suspended membrane configuration was exploited to avoid heat loss by conduction through the silicon bulk. However, there is a lack of comprehensive studies focused on predictive models for the optimization of the thermal and mechanical properties of a microheater. In this work, three microheater layouts in three membrane sizes were developed using the microfabrication process. The performance of these devices was evaluated to predict their thermal and mechanical behaviors by using both experimental and theoretical approaches. Finally, a statistical method was employed to cross-correlate the thermal predictive model and the mechanical failure analysis, aiming at microheater design optimization for gas-sensing applications.

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in the substrate production process has been achieved, thanks to the advances in micro- and nanofabrication for micro-electro-mechanical system (MEMS) technologies. In addition, the use of innovative materials and smaller low-power consumption silicon microheaters led to the development of high-performance gas sensors. Various heater layouts were investigated to optimize the temperature distribution on the membrane, and a suspended membrane configuration was exploited to avoid heat loss by conduction through the silicon bulk. However, there is a lack of comprehensive studies focused on predictive models for the optimization of the thermal and mechanical properties of a microheater. In this work, three microheater layouts in three membrane sizes were developed using the microfabrication process. The performance of these devices was evaluated to predict their thermal and mechanical behaviors by using both experimental and theoretical approaches. Finally, a statistical method was employed to cross-correlate the thermal predictive model and the mechanical failure analysis, aiming at microheater design optimization for gas-sensing applications. [ABSTRACT FROM AUTHOR]