Search

Oral colon delivery systems based on a dual targeting strategy, harnessing time- and microbiota-dependent release mechanisms, were designed in the form of a drug-containing core, a swellable/biodegradable polysaccharide inner layer and a gastroresistant outer film. High-methoxyl pectin was employed as the functional coating polymer and was applied by spray-coating or powder-layering. Stratification of pectin powder required the use of low-viscosity hydroxypropyl methylcellulose in water solution as the binder. These coatings exhibited rough surfaces and higher thicknesses than the spray-coated ones. Using a finer powder fraction improved the process outcome, coating quality and inherent barrier properties in aqueous fluids. Pulsatile release profiles and reproducible lag phases of the pursued duration were obtained from systems manufactured by both techniques. This performance was confirmed by double-coated systems, provided with a Kollicoat® MAE outer film that yielded resistance in the acidic stage of the test. Moreover, HM pectin-based coatings manufactured by powder-layering, tested in the presence of bacteria from a Crohn's disease patient, showed earlier release, supporting the role of microbial degradation as a triggering mechanism at the target site. The overall results highlighted viable coating options and in vitro release characteristics, sparking new interest in naturally occurring pectin as a coating agent for oral colon delivery. [ABSTRACT FROM AUTHOR]

Oral colon delivery systems based on a dual targeting strategy, harnessing time- and microbiota-dependent release mechanisms, were designed in the form of a drug-containing core, a swellable/biodegradable polysaccharide inner layer and a gastroresistant outer film. High-methoxyl pectin was employed as the functional coating polymer and was applied by spray-coating or powder-layering. Stratification of pectin powder required the use of low-viscosity hydroxypropyl methylcellulose in water solution as the binder. These coatings exhibited rough surfaces and higher thicknesses than the spray-coated ones. Using a finer powder fraction improved the process outcome, coating quality and inherent barrier properties in aqueous fluids. Pulsatile release profiles and reproducible lag phases of the pursued duration were obtained from systems manufactured by both techniques. This performance was confirmed by double-coated systems, provided with a Kollicoat® MAE outer film that yielded resistance in the acidic stage of the test. Moreover, HM pectin-based coatings manufactured by powder-layering, tested in the presence of bacteria from a Crohn’s disease patient, showed earlier release, supporting the role of microbial degradation as a triggering mechanism at the target site. The overall results highlighted viable coating options and in vitro release characteristics, sparking new interest in naturally occurring pectin as a coating agent for oral colon delivery.

A swellable/erodible system for oral time-dependent release, demonstrated to provide consistent pulsatile and colonic delivery performance, has been manufactured through a range of coating techniques to achieve the functional hydroxypropyl methylcellulose (HPMC) layer. Although aqueous spray-coating has long been preferred, the processing times and yields still represent open issues, especially in view of the considerable amount of polymer required to give in vivo lag phases of proper duration. To make manufacturing of the delivery system more cost-efficient, different coating modes were thus evaluated, namely top and tangential spray-coating as well as powder-layering, using a fluid bed equipment. To this aim, disintegrating tablets of 5 mm in diameter, containing a tracer drug, were coated up to 50% weight gain with low-viscosity HPMC, either as a water solution or as a powder formulation. In all cases, process feasibility was assessed following setup of the operating conditions. Irrespective of the technique employed, the resulting dosage forms exhibited uniform coating layers able to defer the onset of release as a function of the amount of polymer applied. The structure and thickness of such layers differed depending on the deposition modes. With respect to top spray-, both tangential spray-coating and powder-layering were shown to remarkably ameliorate the process time, which was reduced to approximately 1/3 and 1/6, and to enhance the yield by almost 20 and 30%, respectively. Clear advantages associated with such techniques were thus highlighted, particularly with respect to powder-layering here newly proposed for application of a swellable hydrophilic cellulose derivative. [ABSTRACT FROM AUTHOR]

Mucoadhesive polymer-coated pellets containing metformin hydrochloride were prepared by the powder-layering technique using a centrifugal fluidizing (CF)-granulator. Four high-viscosity polymers were applied to make the pellets: 1) hydroxymethylcellulose (HPMC), 2) sodium alginate (Na-Alg), 3) HPMC/Carbopol, and 4) sodium carboxylmethylcellulose (Na-CMC). The physical crushing test, mucoadhesive test, zeta-potential test, in vitro release study and observation of gastroretention state of the dosage form were performed to investigate the pellets. The strong adhesive interaction between the Na-CMC-coated pellets and the mucin disc was obtained by mucoadhesive test. Na-Alg was most effective among the polymers used in changing the value of zeta potential of the mucin solution by the interaction between a polymer and a mucin particle. Results from drug dissolution study showed that over 95% of the drug from all the four pellets was released before 2 h, while Na-CMC- and Na-Alg-coated pellets showed a moderate sustained-release in SGF (simulated gastric fluid) and SIF (simulated intestine fluid), respectively. In conclusion, Na-CMC and Na-Alg seem to be promising candidates for mucoadhesive formulation and further studies to improve the sustained-release property are underway for achieving the ultimate goal of once-a-day formulation of metformin hydrochloride. [ABSTRACT FROM AUTHOR]