Search

Real-time structural health monitoring (SHM) and accurate diagnosis of imminent damage are critical to ensure the structural safety of conventional reinforced concrete (RC) and fiber-reinforced concrete (FRC) structures. Implementations of a piezoelectric lead zirconate titanate (PZT) sensor network in the critical areas of structural members can identify the damage level. This study uses a recently developed PZT-enabled Electro-Mechanical Impedance (EMI)-based, real-time, wireless, and portable SHM and damage detection system in prismatic specimens subjected to flexural repeated loading plain concrete (PC) and FRC. Furthermore, this research examined the efficacy of the proposed SHM methodology for FRC cracking identification of the specimens at various loading levels with different sensor layouts. Additionally, damage quantification using values of statistical damage indices is included. For this reason, the well-known conventional static metric of the Root Mean Square Deviation (RMSD) and the Mean Absolute Percentage Deviation (MAPD) were used and compared. This paper addresses a reliable monitoring experimental methodology in FRC to diagnose damage and predict the forthcoming flexural failure at early damage stages, such as at the onset of cracking. Test results indicated that damage assessment is successfully achieved using RMSD and MAPD indices of a strategically placed network of PZT sensors. Furthermore, the Upper Control Limit (UCL) index was adopted as a threshold for further sifting the scalar damage indices. Additionally, the proposed PZT-enable SHM method for prompt damage level is first established, providing the relationship between the voltage frequency response of the 32 PZT sensors and the crack propagation of the FRC prisms due to the step-by-step increased imposed load. In conclusion, damage diagnosis through continuous monitoring of PZTs responses of FRC due to flexural loading is a quantitative, reliable, and promising application. [ABSTRACT FROM AUTHOR]

Effective damage identification is paramount to evaluating safety conditions and preventing catastrophic failures of concrete structures. Although various methods have been introduced in the literature, developing robust and reliable structural health monitoring (SHM) procedures remains an open research challenge. This study proposes a new approach utilizing a 1-D convolution neural network to identify the formation of cracks from the raw electromechanical impedance (EMI) signature of externally bonded piezoelectric lead zirconate titanate (PZT) transducers. Externally bonded PZT transducers were used to determine the EMI signature of fiber-reinforced concrete specimens subjected to monotonous and repeatable compression loading. A leave-one-specimen-out cross-validation scenario was adopted for the proposed SHM approach for a stricter and more realistic validation procedure. The experimental study and the obtained results clearly demonstrate the capacity of the introduced approach to provide autonomous and reliable damage identification in a PZT-enabled SHM system, with a mean accuracy of 95.24% and a standard deviation of 5.64%. [ABSTRACT FROM AUTHOR]

Real-time structural health monitoring (SHM) and accurate diagnosis of imminent damage are critical to ensure the structural safety of conventional reinforced concrete (RC) and fiber-reinforced concrete (FRC) structures. Implementations of a piezoelectric lead zirconate titanate (PZT) sensor network in the critical areas of structural members can identify the damage level. This study uses a recently developed PZT-enabled Electro-Mechanical Impedance (EMI)-based, real-time, wireless, and portable SHM and damage detection system in prismatic specimens subjected to flexural repeated loading plain concrete (PC) and FRC. Furthermore, this research examined the efficacy of the proposed SHM methodology for FRC cracking identification of the specimens at various loading levels with different sensor layouts. Additionally, damage quantification using values of statistical damage indices is included. For this reason, the well-known conventional static metric of the Root Mean Square Deviation (RMSD) and the Mean Absolute Percentage Deviation (MAPD) were used and compared. This paper addresses a reliable monitoring experimental methodology in FRC to diagnose damage and predict the forthcoming flexural failure at early damage stages, such as at the onset of cracking. Test results indicated that damage assessment is successfully achieved using RMSD and MAPD indices of a strategically placed network of PZT sensors. Furthermore, the Upper Control Limit (UCL) index was adopted as a threshold for further sifting the scalar damage indices. Additionally, the proposed PZT-enable SHM method for prompt damage level is first established, providing the relationship between the voltage frequency response of the 32 PZT sensors and the crack propagation of the FRC prisms due to the step-by-step increased imposed load. In conclusion, damage diagnosis through continuous monitoring of PZTs responses of FRC due to flexural loading is a quantitative, reliable, and promising application.

Interface bonding conditions between concrete and steel materials play key roles in ensuring the composite effect and load-carrying capacity of concrete–steel composite structures such as concrete-filled steel tube (CFST) members in practice. A method using both surface wave and electromechanical impedance (EMI) measurement for detecting the existence and the location of inaccessible interface debonding defects between the concrete core and steel tube in CFST members using piezoelectric lead zirconate titanate (PZT) patches as actuators and sensors is proposed. A rectangular CFST specimen with two artificially mimicked interface debonding defects was experimentally verified using PZT patches as the actuator and sensor. By comparing the surface wave measurement of PZT sensors at different surface wave travelling paths under both a continuous sinusoidal signal and a 10-period sinusoidal windowed signal, three potential interface debonding defects are quickly identified. Furthermore, the accurate locations of the three detected potential interface debonding defects are determined with the help of EMI measurements from a number of additional PZT sensors around the three potential interface debonding defects. Finally, the accuracy of the proposed interface debonding detection method is verified with a destructive observation by removing the local steel tube at the three detected interface debonding locations. The observation results show that the three detected interface debonding defects are two mimicked interface debonding defects, and an unexpected debonding defect occurred spontaneously due to concrete shrinkage in the past one and a half years before conducting the test. Results in this study indicate that the proposed method can be an efficient and accurate approach for the detection of unknown interface debonding defects in existing CFST members.

Fiber Reinforced Concrete (FRC) has shown significant promise in enhancing the safety and reliability of civil infrastructures. Structural Health Monitoring (SHM) has recently become essential due to the increasing demand for the safety and sustainability of civil infrastructures. Thus, SHM provides critical benefits for future research to develop more advanced monitoring systems that effectively detect and diagnose the damage in FRC structures. This study investigates the potential of an Electro-Mechanical Impedance (EMI) based SHM system for detecting cracks in FRC prisms subjected to four-point repeated loading. For the needs of this research, an experimental investigation of three FRC specimens with the dimensions 150 × 150 × 450 (mm) were subjected to three different loading levels where no visual cracks formed on their surface. Next, prisms were subjected to reloading until they depleted their load-carrying capacity, resulting in pure bending fracture at the mid-span. A network of nine cement paste coated Piezoelectric lead Zirconate Titanate (PZT) transducers have been epoxy bonded to the surface of the FRC prisms, and their frequency signal measurements were utilized for quantitative damage assessment. The observed changes in the frequency response of each PZT sensor are evaluated as solid indications of potential damage presence, and the increasing trend connotes the severity of the damage. The well-known conventional static metric of the Root Mean Square Deviation (RMSD) was successfully used to quantify and evaluate the cracking in FRC specimens while improving the efficiency and accuracy of damage detection. Similarly, the dynamic metric of a new statistical index called “moving Root Mean Square Deviation” (mRMSD) was satisfactorily used and compared to achieve and enhance accuracy in the damage evaluation process.

Fiber Reinforced Concrete (FRC) has shown significant promise in enhancing the safety and reliability of civil infrastructures. Structural Health Monitoring (SHM) has recently become essential due to the increasing demand for the safety and sustainability of civil infrastructures. Thus, SHM provides critical benefits for future research to develop more advanced monitoring systems that effectively detect and diagnose the damage in FRC structures. This study investigates the potential of an Electro-Mechanical Impedance (EMI) based SHM system for detecting cracks in FRC prisms subjected to four-point repeated loading. For the needs of this research, an experimental investigation of three FRC specimens with the dimensions 150 × 150 × 450 (mm) were subjected to three different loading levels where no visual cracks formed on their surface. Next, prisms were subjected to reloading until they depleted their load-carrying capacity, resulting in pure bending fracture at the mid-span. A network of nine cement paste coated Piezoelectric lead Zirconate Titanate (PZT) transducers have been epoxy bonded to the surface of the FRC prisms, and their frequency signal measurements were utilized for quantitative damage assessment. The observed changes in the frequency response of each PZT sensor are evaluated as solid indications of potential damage presence, and the increasing trend connotes the severity of the damage. The well-known conventional static metric of the Root Mean Square Deviation (RMSD) was successfully used to quantify and evaluate the cracking in FRC specimens while improving the efficiency and accuracy of damage detection. Similarly, the dynamic metric of a new statistical index called "moving Root Mean Square Deviation" (mRMSD) was satisfactorily used and compared to achieve and enhance accuracy in the damage evaluation process. [ABSTRACT FROM AUTHOR]

In order to efficiently investigate the effect of the mesoscale heterogeneity of a concrete core and the randomness of circular coarse aggregate distribution on the stress wave propagation procedure and the response of PZT sensors in traditional coupling mesoscale finite element models (CMFEMs), firstly, a mesoscale homogenization approach is introduced to establish coupling homogenization finite element models (CHFEMs) with circular coarse aggregates. CHFEMs of rectangular concrete-filled steel tube (RCFST) members include a surface-mounted piezoelectric lead zirconate titanate (PZT) actuator, PZT sensors at different measurement distances, a concrete core with mesoscale homogeneity. Secondly, the computation efficiency and accuracy of the proposed CHFEMs and the size effect of representative area elements (RAEs) on the stress wave field simulation results are investigated. The stress wave field simulation results indicate that the size of an RAE limitedly affects the stress wave fields. Thirdly, the responses of PZT sensors at different measurement distances of the CHFEMs under both sinusoidal and modulated signals are studied and compared with those of the corresponding CMFEMs. Finally, the effect of the mesoscale heterogeneity of a concrete core and the randomness of circular coarse aggregate distribution on the responses of PZT sensors in the time domain of the CHFEMs with and without debond defects is further investigated. The results show that the mesoscale heterogeneity of a concrete core and randomness of circular coarse aggregate distribution only have a certain influence on the response of PZT sensors that are close to the PZT actuator. Instead, the interface debond defects dominantly affect the response of each PZT sensor regardless of the measurement distance. This finding supports the feasibility of stress wave-based debond detection for RCFSTs where the concrete core is a heterogeneous material. [ABSTRACT FROM AUTHOR]

Traditional methods for estimating structural deterioration are generally costly and inefficient. Recent studies have demonstrated that implementing a network of piezoelectric transducers mounted to critical regions of concrete structural members substantially increases the efficacy of the structural health monitoring (SHM) method. This study uses a recently developed electro-mechanical-admittance (EMA)-based SHM system for real-time damage diagnosis of carbon FRP (C-FRP) ropes installed as shear composite reinforcement in RC deep beams. The applied SHM technique uses the frequency response measurements of a network of piezoelectric lead zirconate titanate (PZT) patches. The proposed strengthening methods using C-FRP ropes as ETS and NSM shear reinforcement and the applied anchorage techniques significantly enhanced the strength and the overall performance of the examined beams. The retrofitted beams exhibited increased shear capacity and improved post-peak response with substantial ductility compared with the brittle failure of the non-strengthened specimens. The health condition and the potential debonding failure of the applied composite fiber material were also examined and quantified using the proposed SHM technique. Damage quantification of C-FRP ropes is achieved by comparing and assessing the values of several statistical damage indices. The experimental results demonstrated that the proposed monitoring system successfully diagnosed the region where the damage occurred by providing early warning of the forthcoming critical shear cracking of concrete and C-FRP rope debonding failures. Furthermore, the internal PZT transducers showed sound indications of the C-FRP rope's health condition, demonstrating a direct correlation with the mechanical performance of the fibers. [ABSTRACT FROM AUTHOR]

In order to efficiently investigate the effect of the mesoscale heterogeneity of a concrete core and the randomness of circular coarse aggregate distribution on the stress wave propagation procedure and the response of PZT sensors in traditional coupling mesoscale finite element models (CMFEMs), firstly, a mesoscale homogenization approach is introduced to establish coupling homogenization finite element models (CHFEMs) with circular coarse aggregates. CHFEMs of rectangular concrete-filled steel tube (RCFST) members include a surface-mounted piezoelectric lead zirconate titanate (PZT) actuator, PZT sensors at different measurement distances, a concrete core with mesoscale homogeneity. Secondly, the computation efficiency and accuracy of the proposed CHFEMs and the size effect of representative area elements (RAEs) on the stress wave field simulation results are investigated. The stress wave field simulation results indicate that the size of an RAE limitedly affects the stress wave fields. Thirdly, the responses of PZT sensors at different measurement distances of the CHFEMs under both sinusoidal and modulated signals are studied and compared with those of the corresponding CMFEMs. Finally, the effect of the mesoscale heterogeneity of a concrete core and the randomness of circular coarse aggregate distribution on the responses of PZT sensors in the time domain of the CHFEMs with and without debond defects is further investigated. The results show that the mesoscale heterogeneity of a concrete core and randomness of circular coarse aggregate distribution only have a certain influence on the response of PZT sensors that are close to the PZT actuator. Instead, the interface debond defects dominantly affect the response of each PZT sensor regardless of the measurement distance. This finding supports the feasibility of stress wave-based debond detection for RCFSTs where the concrete core is a heterogeneous material.

Traditional methods for estimating structural deterioration are generally costly and inefficient. Recent studies have demonstrated that implementing a network of piezoelectric transducers mounted to critical regions of concrete structural members substantially increases the efficacy of the structural health monitoring (SHM) method. This study uses a recently developed electro-mechanical-admittance (EMA)-based SHM system for real-time damage diagnosis of carbon FRP (C-FRP) ropes installed as shear composite reinforcement in RC deep beams. The applied SHM technique uses the frequency response measurements of a network of piezoelectric lead zirconate titanate (PZT) patches. The proposed strengthening methods using C-FRP ropes as ETS and NSM shear reinforcement and the applied anchorage techniques significantly enhanced the strength and the overall performance of the examined beams. The retrofitted beams exhibited increased shear capacity and improved post-peak response with substantial ductility compared with the brittle failure of the non-strengthened specimens. The health condition and the potential debonding failure of the applied composite fiber material were also examined and quantified using the proposed SHM technique. Damage quantification of C-FRP ropes is achieved by comparing and assessing the values of several statistical damage indices. The experimental results demonstrated that the proposed monitoring system successfully diagnosed the region where the damage occurred by providing early warning of the forthcoming critical shear cracking of concrete and C-FRP rope debonding failures. Furthermore, the internal PZT transducers showed sound indications of the C-FRP rope’s health condition, demonstrating a direct correlation with the mechanical performance of the fibers.

Interface bonding conditions between concrete and steel materials play key roles in ensuring the composite effect and load-carrying capacity of concrete-steel composite structures such as concrete-filled steel tube (CFST) members in practice. A method using both surface wave and electromechanical impedance (EMI) measurement for detecting the existence and the location of inaccessible interface debonding defects between the concrete core and steel tube in CFST members using piezoelectric lead zirconate titanate (PZT) patches as actuators and sensors is proposed. A rectangular CFST specimen with two artificially mimicked interface debonding defects was experimentally verified using PZT patches as the actuator and sensor. By comparing the surface wave measurement of PZT sensors at different surface wave travelling paths under both a continuous sinusoidal signal and a 10-period sinusoidal windowed signal, three potential interface debonding defects are quickly identified. Furthermore, the accurate locations of the three detected potential interface debonding defects are determined with the help of EMI measurements from a number of additional PZT sensors around the three potential interface debonding defects. Finally, the accuracy of the proposed interface debonding detection method is verified with a destructive observation by removing the local steel tube at the three detected interface debonding locations. The observation results show that the three detected interface debonding defects are two mimicked interface debonding defects, and an unexpected debonding defect occurred spontaneously due to concrete shrinkage in the past one and a half years before conducting the test. Results in this study indicate that the proposed method can be an efficient and accurate approach for the detection of unknown interface debonding defects in existing CFST members.

Identifying wire breaks in prestressed concrete cylinder pipes (PCCP) has become an important research topic in recent years. Based on previous numerical studies, this paper presents the first experimental study to identify the number of wire breaks in a PCCP using piezoelectric sensing technology. During the experiment, wire breaks were simulated on a large-diameter embedded DN4000 PCCP and small-diameter lined DN700 PCCP, with a testing device designed to realise the identification method using body stress waves as a medium. Based on the analysis of the output voltage, two types of damage indices were adopted to evaluate the wire break damage. The optimal identification frequencies and corresponding damage indices were determined for different engineering application scenarios. The experimental results are consistent with those of previous numerical simulation studies, further confirming the validity of this technique. • This is the first experimental identification of wire breaks by piezoceramics. • Body stress waves are used as a medium for identifying wire breaks. • The optimal signal frequencies and corresponding damage indices have been identified. • Piezoelectric sensing technology can meet various wire break identification needs. [ABSTRACT FROM AUTHOR]

The effectiveness and the sensitivity of a Wireless impedance/Admittance Monitoring System (WiAMS) for the prompt damage diagnosis of two single-storey single-span Reinforced Concrete (RC) frames under cyclic loading is experimentally investigated. The geometrical and the reinforcement characteristics of the RC structural members of the frames represent typical old RC frame structure without consideration of seismic design criteria. The columns of the frames are vulnerable to shear failure under lateral load due to their low height-to-depth ratio and insufficient transverse reinforcement. The proposed Structural Health Monitoring (SHM) system comprises of specially manufactured autonomous portable devices that acquire the in-situ voltage frequency responses of a network of twenty piezoelectric transducers mounted to the RC frames. Measurements of external and internal small-sized piezoelectric patches are utilized for damage localization and assessment at various and increased damage levels as the magnitude of the imposed lateral cycle deformations increases. A bare RC frame and a strengthened one using a pair of steel crossed tension-ties (X-bracing) have been tested in order to check the sensitivity of the developed WiAMS in different structural conditions since crack propagation, damage locations and failure mode of the examined frames vary. Indeed, the imposed loading caused brittle shear failure to the column of the bare frame and the formation of plastic hinges at the beam ends of the X-braced frame. Test results highlighted the ability of the proposed SHM to identify incipient damages due to concrete cracking and steel yielding since promising early indication of the forthcoming critical failures before any visible sign has been obtained. [ABSTRACT FROM AUTHOR]

The application of an innovative real-time structural health monitoring system is studied through tests performed on flexural and shear-critical reinforced concrete elements subjected to monotonic and cyclic loading. The test set-up involves a Wireless impedance/Admittance Monitoring System (WiAMS) that comprises specially manufactured small-sized portable devices to collect the voltage frequency responses of an array of smart piezoelectric transducers mounted on structural members of reinforced concrete constructions. Damage detection and evaluation is achieved using the in-situ measurements of the integrated piezoelectric sensors/actuators signals at the healthy state of the member and at various levels of damage during testing. Three different installations of Piezoelectric lead Zirconate Titanate (PZT) transducers are examined: (a) epoxy bonded PZTs on the surface of the steel reinforcing bars of the flexural elements, (b) PZTs embedded inside the concrete mass of the shear-critical beams and (c) externally epoxy bonded PZTs attached to the concrete surface of the tested elements. The smart piezoelectric materials have been pre-installed before testing based on the potential flexural and shear cracking of the elements. Quantitative assessment of the examined damage levels using values for the statistical damage index is also presented and discussed. Voltage signals and index values acquired from the PZTs’ measurements using the proposed wireless monitoring technique demonstrated obvious discrepancies between the frequency response of the healthy and the examined damage levels for every tested element. These differences clearly indicate the presence of damage, whereas their gradation reveals the magnitude of the occurred damage. Promising results concerning the prediction of the forthcoming fatal failures at early damage stages have also been derived.

Concrete-filled steel tube (CFST) members have been widely employed as major structural members carrying axial or vertical loads and the interface bond condition between steel tube and concrete core plays key roles in ensuring the confinement effect of steel tube on concrete core. An effective interface debonding defect detection approach for CFSTs is critical. In this paper, an active interface debonding detection approach using surface wave measurement with a piezoelectric lead zirconate titanate (PZT) patch as sensor mounted on the outer surface of the CFST member excited with a PZT actuator mounted on the identical surface is proposed in order to avoid embedding PZT-based smart aggregates (SAs) in concrete core. In order to validate the feasibility of the proposed approach and to investigate the effect of interface debonding defect on the surface wave measurement, two rectangular CFST specimens with different degrees of interface debonding defects on three internal surfaces are designed and experimentally studied. Surface stress waves excited by the PZT actuator and propagating along the steel tube of the specimens are measured by the PZT sensors with a pitch and catch pattern. Results show that the surface-mounted PZT sensor measurement is sensitive to the existence of interface debonding defect and the interface debonding defect leads to the increase in the voltage amplitude of surface wave measurement. A damage index defined with the surface wave measurement has a linear relationship with the heights of the interface debonding defects.

In this study, the numerical investigation of the detectability of concrete aggregate segregation in circular concrete-filled steel tubulars (CCFST) based on piezoelectric lead zirconate titanate (PZT) measurement is performed. The stress wave propagation in the concrete core of circular CCFST excited with a surface-mounted PZT actuator is studied with multi-scale and multi-physical field coupling analysis. The piezoelectric effect of PZT patches and its coupling effect with CFSTs are considered. Numerical concrete modeling technology is employed to construct the concrete core composed of randomly distributed aggregates with and without aggregate segregation at different levels, mortar, and an interfacial transition zone (ITZ). The effects of the random distribution of elliptical aggregates, aggregate segregation, and the existence of ITZ in the concrete core on the wave fields in the cross-section and the corresponding voltage response of the embedded PZT sensor are discussed. An evaluation index based on wavelet packet analysis on the output voltage response is defined, and its sensitivity to concrete aggregate segregation is systematically investigated. The multi-scale and multi-physics coupling simulation results indicate that concrete aggregate segregation in the concrete core of CFST members can be efficiently detected based on the stress wave measurement with a PZT sensor.

Damage detection at early cracking stages in shear-critical reinforced concrete beams, before further deterioration and their inevitable brittle shear failure is crucial for structural safety and integrity. The effectiveness of a structural health monitoring technique using the admittance measurements of piezoelectric transducers mounted on a reinforced concrete beam without shear reinforcement is experimentally investigated. Embedded “smart aggregate” transducers and externally bonded piezoelectric patches have been placed in arrays at both shear spans of the beam. Beam were tested till total shear failure and monitored at three different states; healthy, flexural cracking and diagonal cracking. Test results showed that transducers close to the critical diagonal crack provided sound and graduated discrepancies between the admittance responses at the healthy state and thedamage levels.Damage assessment using statistical indices calculated from the measurements of all transducers was also attempted. Rational changes of the index values were obtained with respect to the increase of the damage. Admittance responses and index values of the transducers located on the shear span where the critical diagonal crack formed provided cogent evidence of damage. On the contrary, negligible indication of damage was yielded by the responses of the transducers located on the other shear span, where no diagonal cracking occurred.

The ability of a new portable real-time Wireless impedance/Admittance Monitoring System (WiAMS) in damage diagnosis of shear-critical RC beams is experimentally studied. This system is based on the electromechanical impedance concept integrating piezoelectric transducers in reinforced concrete structural elements. The proposed monitoring method uses WiAMS devices and an array of embedded “smart aggregates” and externally bonded piezoelectric transducers. Five shear-critical beams are tested in order to evaluate the ability of the proposed methodology in damage detection and assessment. Voltage signatures of the piezoelectric transducers have been measured at the healthy state and at different damage levels of the beams. Quantitative assessment of the damage using values of statistical damage index is also presented and discussed. Test results showed that transducers close to the diagonal cracking provided sound and gradual differences between the signatures at the healthy state and each damage level. Voltage responses and index values of the transducers located on the shear span where the critical crack formed provided cogent evidence of damage and their gradual character revealed the magnitude of damage. Promising results concerning the prediction of the forthcoming final shear failure at earlier damage stages such the onset of diagonal cracking have also been derived. [ABSTRACT FROM AUTHOR]

• A spectral element method using absorbing layers with increasing damping is proposed. • The approach simulates the local wave propagation in a substructure of a CSFST member. • ALID's dimensions and parameters are determined and their effect are demonstrated. • The interface debonding detection mechanism with local wave measurement is studied. Concrete-Filled Steel Tube (CFST) members have been widely employed in high-rise buildings or long-span bridges as vertical or axial load-carrying components and the development of efficient interface debonding detection approach for CFST members has been a common concern. In recent years, wave propagation measurement based interface debonding defect approaches have shown their efficiency and efficient numerical simulation techniques on elastic wave propagation within CFST members are critical to understand the mechanism of the approaches. In this study, in order to efficiently investigate the effect of interface debonding on local elastic wave propagation within CFST members, a two-dimensional (2D) time domain spectral element method (SEM), where absorbing layers with increasing damping (ALID) is introduced to attenuate the wave reflection effect on boundaries, is developed at first. Then, the developed 2D time domain SEM with ALID is employed to simulate the wave propagation in a steel plate and an isotropic panel mimicking concrete core in CFST members. The effect of ALID on the attenuation of reflected Lamb waves in the steel plate and the bulk waves in the isotropic panel is validated. Finally, the local wave propagation in a substructure of the CFST model is numerically studied with the proposed 2D SEM with ALID. The dimensions and parameters of the ALID are determined and their effect on eliminating the reflected waves within the substructure excited by a single point load and a surface-mounted PZT patch actuator is demonstrated, respectively. The developed 2D time domain SEM with ALID provides efficient tool to simulate the local wave propagation in CFST specimens with interface debonding defects for understanding the mechanism of local stress wave measurement based interface debonding detection method to be discussed in the accompanying paper. [ABSTRACT FROM AUTHOR]

Concrete-filled steel tube (CFST) members have been widely employed as major structural members carrying axial or vertical loads and the interface bond condition between steel tube and concrete core plays key roles in ensuring the confinement effect of steel tube on concrete core. An effective interface debonding defect detection approach for CFSTs is critical. In this paper, an active interface debonding detection approach using surface wave measurement with a piezoelectric lead zirconate titanate (PZT) patch as sensor mounted on the outer surface of the CFST member excited with a PZT actuator mounted on the identical surface is proposed in order to avoid embedding PZT-based smart aggregates (SAs) in concrete core. In order to validate the feasibility of the proposed approach and to investigate the effect of interface debonding defect on the surface wave measurement, two rectangular CFST specimens with different degrees of interface debonding defects on three internal surfaces are designed and experimentally studied. Surface stress waves excited by the PZT actuator and propagating along the steel tube of the specimens are measured by the PZT sensors with a pitch and catch pattern. Results show that the surface-mounted PZT sensor measurement is sensitive to the existence of interface debonding defect and the interface debonding defect leads to the increase in the voltage amplitude of surface wave measurement. A damage index defined with the surface wave measurement has a linear relationship with the heights of the interface debonding defects. [ABSTRACT FROM AUTHOR]

In this study, the numerical investigation of the detectability of concrete aggregate segregation in circular concrete-filled steel tubulars (CCFST) based on piezoelectric lead zirconate titanate (PZT) measurement is performed. The stress wave propagation in the concrete core of circular CCFST excited with a surface-mounted PZT actuator is studied with multi-scale and multi-physical field coupling analysis. The piezoelectric effect of PZT patches and its coupling effect with CFSTs are considered. Numerical concrete modeling technology is employed to construct the concrete core composed of randomly distributed aggregates with and without aggregate segregation at different levels, mortar, and an interfacial transition zone (ITZ). The effects of the random distribution of elliptical aggregates, aggregate segregation, and the existence of ITZ in the concrete core on the wave fields in the cross-section and the corresponding voltage response of the embedded PZT sensor are discussed. An evaluation index based on wavelet packet analysis on the output voltage response is defined, and its sensitivity to concrete aggregate segregation is systematically investigated. The multi-scale and multi-physics coupling simulation results indicate that concrete aggregate segregation in the concrete core of CFST members can be efficiently detected based on the stress wave measurement with a PZT sensor. [ABSTRACT FROM AUTHOR]