Search

Three‐dimensional printing (3DP) has emerged as a game‐changing technology in the pharmaceutical industry, providing novel formulation development in the pharmaceutical sector as a whole, which improved patients' individualized therapy. The pediatric population is among the key targets for individualized therapy. Children are a diverse group that includes neonates, infants, and toddlers, each with unique physiological characteristics. Treatment adherence has a significant impact on safe and effective pharmacotherapy in the pediatric population. Improvement of therapeutic dosage forms that provide for the special demands of the pediatric population is a significant challenge for the pharmaceutical industry. Scientists have actively explored 3DP, a quick prototype manufacturing method that has emerged in recent years from many occupations due to its benefits of modest operation, excellent reproducibility, and vast adaptability. This review illuminates the most widely used 3DP technology and its application in the development of pediatric‐friendly drug formulations. This 3DP technology allows optimization of pediatric dosage regimens and cases that require individualized treatment, such as geriatrics, renal impairment, liver impairment, critically ill, pregnancy populations, and drugs with nonlinear pharmacokinetics. The fast evolution of 3DP expertise, in addition to the introduction of pharmaceutical inks, has enormous promise for patient dosage form customization. [ABSTRACT FROM AUTHOR]

Since the acceptability of a medicine can significantly impact therapeutic outcomes, this study aimed to determine and compare the preferences of children, parents, and healthcare professionals for the most commonly used pediatric oral medicine formulations (syrup, mini-tablets, oblong tablets, round tablets) addressing all pediatric age groups, 0–<18 years (y). This survey study employed sex-, age-, and participant group-adapted questionnaires for eight cohorts of participants, i.e., children 6–<12 y, adolescents 12–<18 y, parents of children in four age groups (0–<2 y, 2–<6 y, 6–<12 y, and 12–<18 y), nurses, and pediatricians. Descriptive statistics were used for data analysis. In the age groups 0–<2 y and 2–<6 y, mini-tablets were preferred over syrup by all participants. In the age group 6–12 y, solid dosage forms were also preferred over syrup by all participants. In the age group 12–<18 y, healthcare professionals preferred solid dosage forms over syrup. Parents preferred higher amounts of mini-tablets and syrup compared to round and oblong tablets, while adolescents' preferences did not differentiate between these formulations. Based on the study results and in contrast to current practice, it is suggested to consider solid dosage forms for future age-appropriate medicinal products already for younger age groups. [ABSTRACT FROM AUTHOR]

Three-dimensional printing (3DP) technology in pharmaceutical areas is leading to a significant change in controlled drug delivery and pharmaceutical product development. Pharmaceutical industries and academics are becoming increasingly interested in this innovative technology due to its inherent inexpensiveness and rapid prototyping. The 3DP process could be established in the pharmaceutical industry to replace conventional large-scale manufacturing processes, particularly useful for personalizing pediatric drugs. For instance, shape, size, dosage, drug release and multi-drug combinations can be tailored according to the patient's needs. Pediatric drug development has a significant global impact due to the growing needs for accessible age-appropriate pediatric medicines and for acceptable drug products to ensure adherence to the prescribed treatment. Three-dimensional printing offers several significant advantages for clinical pharmaceutical drug development, such as the ability to personalize medicines, speed up drug manufacturing timelines and provide on-demand drugs in hospitals and pharmacies. The aim of this article is to highlight the benefits of extrusion-based 3D printing technology. The future potential of 3DP in pharmaceuticals has been widely shown in the last few years. This article summarizes the discoveries about pediatric pharmaceutical formulations which have been developed with extrusion-based technologies. [ABSTRACT FROM AUTHOR]

Background: Propranolol, largely prescribed as an antihypertensive and antiarrhythmic drug in pediatrics, is characterized by a bitter taste and an astringent aftertaste. Currently, the therapy requires crushing of tablets for adults and their dispersion in water many times a day, leading to loss of dosing accuracy, low palatability, and poor compliance for both patients and caregivers. Objectives: This work aimed to exploit cyclodextrin complexation by cogrinding to develop orally disintegrating tablets (ODTs) endowed with reliable dosing accuracy, good palatability and safety, ease of swallowability, and ultimately better compliance for both pediatric patients and caregivers. Results: Different formulation variables and process parameters were evaluated in preparing ODTs. The technological and morphological characterization and disintegration tests were performed according to official and alternative tests to select the ODT formulation based on the drug Hydroxypropyl-β-cyclodextrin (HPβCD) coground complex form containing Pearlitol® Flash as the diluent and 8% Explotab® as the superdisintegrant, which demonstrated the highest % drug dissolution in simulated saliva and acceptable in vitro palatability assessed by the electronic tongue, confirming the good taste-masking power of HPβCD towards propranolol. Conclusions: Such a new dosage form of propranolol could represent a valid alternative to the common extemporaneous preparations, overcoming the lack of solid formulations of propranolol intended for pediatric use.

Background: Temozolomide (TMZ) oral suspension (Ped-TMZ, KIZFIZO®) is being developed for the treatment of relapsed or refractory neuroblastoma, a rare cancer affecting infants and young children. The study assessed the safety and the bioequivalence of this novel pediatric formulation with existing TMZ oral capsules. Methods: In vitro dissolution profiles and the bioequivalence were evaluated following the European Medicines Agency "Guidelines on the investigation of Bioequivalence". The phase I, multicenter, randomized, open-label, crossover, single-dose bioequivalence study enrolled 36 adult patients with glioblastoma multiforme or lower-grade glioma. Each patient received 200 mg/m2 Ped-TMZ suspension and TMZ capsules (Temodal®) on 2 consecutive days, with the order being randomly assigned. Fourteen blood samples were collected up to 10 h post-dosing. Bioequivalence was assessed by comparing the 90% confidence interval for the ratio of the geometric means of maximum TMZ plasma concentration (Cmax) and the area under the curve (AUCt). Other endpoints included further pharmacokinetic parameters and safety. Results: Both formulations exhibited a fast in vitro dissolution profile with more than 85% of TMZ dissolved within 15 min. For the bioequivalence study, thirty patients completed the trial as per the protocol. The ratio of Ped-TMZ/TMZ capsule geometric means (90% CI) for AUCt and Cmax were 97.18% (95.05–99.35%) and 107.62% (98.07–118.09%), respectively, i.e., within the 80–125% bioequivalence limits. No buccal toxicity was associated with Ped-TMZ liquid formulation. Conclusions: This study showed that Ped-TMZ oral suspension and TMZ oral capsule treatment are immediate release and bioequivalent medicines. There were also no unexpected safety signals or local toxicity (funded by ORPHELIA Pharma; ClinicalTrials.gov number, NCT04467346). [ABSTRACT FROM AUTHOR]

Since the acceptability of a medicine can significantly impact therapeutic outcomes, this study aimed to determine and compare the preferences of children, parents, and healthcare professionals for the most commonly used pediatric oral medicine formulations (syrup, mini-tablets, oblong tablets, round tablets) addressing all pediatric age groups, 0–

Abstract This study aimed to develop and evaluate the stability of sulfadiazine sugar-free extemporaneous oral suspensions, focusing on treating congenital toxoplasmosis. The excipients were carefully chosen to obtain safe products for the pediatric population. Sulfadiazine suspensions (100 mg/ mL) were prepared from the raw material or tablets, stored in amber glass bottles at 5±3ºC, and evaluated at 0, 14, and 30 days. An ultra-performance liquid chromatographic method was developed and validated to assay the drug. The particle size ranged from 29.3 to 50.6 µm, with some variation over the study; pH values around 7.0 and non-Newtonian behavior were observed without modification in the period. Formulations showed a fast dissolution rate (>80% in 15 minutes) without variation over the study. The drug assay was about 100% of the label claimed throughout the study, demonstrating the chemical stability and the preparations’ dose homogeneity. The microbiological investigation indicated that both preparations met the requirements for the microbial count and absence of pathogens. In conclusion, the developed formulations can be used for 30 days when stored under refrigeration. The oral suspensions produced are easy to prepare and contain safe components, providing an alternative for congenital toxoplasmosis treatment in children.

The quality-assured preparation of crushed and diluted preparations for children is a challenge. In this study, a multicenter study was conducted to validate the preparation method for the quality assurance of baclofen powder, clonidine powder, and hydrocortisone powder prepared from tablets according to a previously established method. In-hospital preparations were prepared at five medical facilities under different crushing and mixing conditions. After storage in closed bottles, in-use bottles, and laminated paper for 120 days, ingredients stability, drug elution, and content uniformity after packaging were evaluated. All three ingredients were maintained at between 90% and 110% of their initial content for 120 days under packaging conditions of 25 ± 2 °C and 60 ± 5% relative humidity, with no change in dissolution in all formulations made at all five facilities. The content uniformity was also acceptable. The established method may contribute to quality-assured pediatric dosage form modification. [ABSTRACT FROM AUTHOR]

Asciminib, a first‐in‐class allosteric BCR::ABL1 inhibitor that works by Specifically Targeting the ABL Myristoyl Pocket (STAMP) is used in the treatment of chronic myeloid leukemia. We describe a randomized, single‐dose, open‐label, four‐period crossover study in healthy adult participants (N = 24) which evaluated the relative bioavailability of a single 40‐mg dose of asciminib in pediatric formulation (1‐mg mini‐tablets) compared with the reference adult tablet under fasted conditions. Additionally, the effect of food on the bioavailability of the mini‐tablet formulation was evaluated. Under fasted conditions, asciminib exposure was similar for both formulations (geometric mean [Gmean] area under the concentration–time curve from time 0 to infinity [AUCinf] 5970 and 5700 ng ×h/mL, respectively). Food decreased the AUCinf and maximum plasma concentration (Cmax) of the asciminib mini‐tablets; this effect was more pronounced with a high‐fat meal (Gmean ratios [90% confidence interval]: fasted/low‐fat meal, 0.42 [0.38–047], 0.32 [0.28–0.37], respectively; fasted/high‐fat meal, 0.30 [0.27–0.34], 0.22 [0.19–0.25], respectively). The mini‐tablets were assessed to be easy to ingest with good palatability. Asciminib doses for a pivotal pediatric clinical trial will be defined using physiologically based pharmacokinetic modeling, which will consider the age and the higher food effect observed with the mini‐tablets. [ABSTRACT FROM AUTHOR]

Three-dimensional printing (3DP) technology in pharmaceutical areas is leading to a significant change in controlled drug delivery and pharmaceutical product development. Pharmaceutical industries and academics are becoming increasingly interested in this innovative technology due to its inherent inexpensiveness and rapid prototyping. The 3DP process could be established in the pharmaceutical industry to replace conventional large-scale manufacturing processes, particularly useful for personalizing pediatric drugs. For instance, shape, size, dosage, drug release and multi-drug combinations can be tailored according to the patient’s needs. Pediatric drug development has a significant global impact due to the growing needs for accessible age-appropriate pediatric medicines and for acceptable drug products to ensure adherence to the prescribed treatment. Three-dimensional printing offers several significant advantages for clinical pharmaceutical drug development, such as the ability to personalize medicines, speed up drug manufacturing timelines and provide on-demand drugs in hospitals and pharmacies. The aim of this article is to highlight the benefits of extrusion-based 3D printing technology. The future potential of 3DP in pharmaceuticals has been widely shown in the last few years. This article summarizes the discoveries about pediatric pharmaceutical formulations which have been developed with extrusion-based technologies.

The availability of age-appropriate oral dosage forms for pediatric patients has remained a challenge. Orodispersible mini-tablets (ODMTs) are a promising delivery system for pediatric patients. The purpose of this work was the development and optimization of sildenafil ODMTs as a new dosage form for the treatment of pulmonary hypertension in children using a design-of-experiment (DoE) approach. A two-factor, three levels (32) full-factorial design was employed to obtain the optimized formulation. The levels of microcrystalline cellulose (MCC; 10–40% w/w) and partially pre-gelatinized starch (PPGS; 2–10% w/w) were set as independent formulation variables. In addition, mechanical strength, disintegration time (DT), and percent drug release were set as critical quality attributes (CQAs) of sildenafil ODMTs. Further, formulation variables were optimized using the desirability function. ANOVA analysis proved that MCC and PPGS had a significant (p < 0.05) impact on CQAs of sildenafil ODMTs with a pronounced influence of PPGS. The optimized formulation was achieved at low (10% w/w) and high (10% w/w) levels of MCC and PPGS, respectively. The optimized sildenafil ODMTs showed crushing strength of 4.72 ± 0.34 KP, friability of 0.71 ± 0.04%, DT of 39.11 ± 1.03 s, and sildenafil release of 86.21 ± 2.41% after 30 min that achieves the USP acceptance criteria for ODMTs. Validation experiments have shown that the acceptable prediction error (<5%) indicated the robustness of the generated design. In conclusion, sildenafil ODMTs have been developed as a suitable oral formulation for the treatment of pediatric pulmonary hypertension using the fluid bed granulation process and the DoE approach. [ABSTRACT FROM AUTHOR]

Nicardipine hydrochloride is an anti-hypertensive drug that is used off-label to treat hypertension in children. A previous oral formulation of nicardipine hydrochloride was developed using a commercial vehicle as an excipient. However, ready-to-use vehicles are prone to supply shortages, and their composition may undergo substantial modifications. The aim of this study was to propose a new oral formulation of nicardipine hydrochloride 2 mg/mL using simple excipients. The formulation included hydroxypropylmethylcellulose, simple syrup, polysorbate 80, sodium saccharin, citrate buffer, strawberry flavor and 0.2% potassium sorbate. The uniformity of content was maintained before and after agitation. Nicardipine hydrochloride concentration assessed by HPLC-MS/MS remained above 90% for 365 days before opening and for 28 days after opening. pH and osmolality were maintained throughout the study, and no microbial contamination was observed. The uniformity of mass of the delivered doses was evaluated using four different devices. A new oral formulation of nicardipine hydrochloride 2 mg/mL was developed using simple and safe excipients. Pharmacological and clinical parameters remain to be assessed and compared with those of the previous formulation. [ABSTRACT FROM AUTHOR]

Background: Temozolomide (TMZ) oral suspension (Ped-TMZ, KIZFIZO®) is being developed for the treatment of relapsed or refractory neuroblastoma, a rare cancer affecting infants and young children. The study assessed the safety and the bioequivalence of this novel pediatric formulation with existing TMZ oral capsules. Methods: In vitro dissolution profiles and the bioequivalence were evaluated following the European Medicines Agency “Guidelines on the investigation of Bioequivalence”. The phase I, multicenter, randomized, open-label, crossover, single-dose bioequivalence study enrolled 36 adult patients with glioblastoma multiforme or lower-grade glioma. Each patient received 200 mg/m2 Ped-TMZ suspension and TMZ capsules (Temodal®) on 2 consecutive days, with the order being randomly assigned. Fourteen blood samples were collected up to 10 h post-dosing. Bioequivalence was assessed by comparing the 90% confidence interval for the ratio of the geometric means of maximum TMZ plasma concentration (Cmax) and the area under the curve (AUCt). Other endpoints included further pharmacokinetic parameters and safety. Results: Both formulations exhibited a fast in vitro dissolution profile with more than 85% of TMZ dissolved within 15 min. For the bioequivalence study, thirty patients completed the trial as per the protocol. The ratio of Ped-TMZ/TMZ capsule geometric means (90% CI) for AUCt and Cmax were 97.18% (95.05–99.35%) and 107.62% (98.07–118.09%), respectively, i.e., within the 80–125% bioequivalence limits. No buccal toxicity was associated with Ped-TMZ liquid formulation. Conclusions: This study showed that Ped-TMZ oral suspension and TMZ oral capsule treatment are immediate release and bioequivalent medicines. There were also no unexpected safety signals or local toxicity (funded by ORPHELIA Pharma; ClinicalTrials.gov number, NCT04467346).

Introduction: Mitotane (o, p′-DDD) is a molecule that was developed many years ago for adrenal cortical carcinoma, but no suitable pediatric dosage form is available for administration to young children. Mitotane requires therapeutic drug monitoring because of its long half-life and difficulty in stabilizing plasma concentrations. Furthermore, Mitotane is a highly lipophilic drug that requires concurrent lipid administration. Case report: We present the case of a 3-year-old girl who was diagnosed with metastatic adrenal cortical carcinoma. Due to the difficulty in administering the tablets and the non-stabilized mitotane dosages, a nasogastric tube was inserted. An administration protocol based on dispersing the tablets in whole milk was established by the pharmacy team. This led to the stabilization of the disease for at least 1.5 years. Management and outcome: Mitotanemia is difficult to stabilize even when treatment is administered orally. To maintain biological efficacy, we propose an easily reproducible protocol. The efficacy was stabilized at a dosage of 1500 mg per day. Mitotanemia fluctuated between 14 mg/mL, and 20 mg/mL. The implementation of this protocol prevented treatment discontinuation. Discussion: The administration of narrow therapeutic range drugs via a nasogastric tube is a challenge for healthcare teams, particularly in pediatric patients. Based on the findings of this clinical case, clinicians should consider future use of this protocol. The use of whole milk as a vehicle for mitotane is a simple, effective, and reproducible method to administer the drug to pediatric patients and can be used for other similar cases. [ABSTRACT FROM AUTHOR]

Disclaimer: In an effort to expedite the publication of articles, AJHP is posting manuscripts online as soon as possible after acceptance. Accepted manuscripts have been peer-reviewed and copyedited, but are posted online before technical formatting and author proofing. These manuscripts are not the final version of record and will be replaced with the final article (formatted per AJHP style and proofed by the authors) at a later time., Purpose: Amiodarone hydrochloride is an antiarrhythmic drug used to treat supraventricular tachycardia. However, there are currently no commercial pediatric forms available to treat young patients. Various oral formulations were previously reported in the literature, but the concentration was lower than the doses prescribed in clinical practice (a loading dose of 500 mg/m2/day for 7-10 days followed by a maintenance dose of 250 mg/m2/day). The objective of this study was to develop an oral liquid formulation of amiodarone hydrochloride at an optimal concentration for use in children and to evaluate its physicochemical and microbiological stability., Methods: No commercial suspension vehicle was used, allowing the choice of excipients. Compounding was performed using hydroxypropylmethylcellulose as thickener, potassium sorbate preservative, citric acid/sodium citrate buffer, sodium saccharin as a , and a strawberry flavoring agent. A concentration of 40 mg/mL was selected based on a 5-year compilation of prescribed doses. Analyses performed were the following: visual and microscopic inspection, testing for antimicrobial preservation, osmolality and pH measurements, quantification of amiodarone hydrochloride by a stability-indicating liquid chromatography method, and a microbiological count., Results: At least 95% of the initial amiodarone hydrochloride remained stable during the 60-day study period under refrigeration. All other tested parameters remained stable at 5 °C. A targeted log reduction of the microorganism inoculum by day 14 and no microbial growth by day 28 were demonstrated in the test for antimicrobial preservation., Conclusion: The stability of 40 mg/mL amiodarone hydrochloride oral suspension was maintained under refrigeration for 60 days before opening bottles and for 1 month after opening bottles., (© American Society of Health-System Pharmacists 2024. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

The quality-assured preparation of crushed and diluted preparations for children is a challenge. In this study, a multicenter study was conducted to validate the preparation method for the quality assurance of baclofen powder, clonidine powder, and hydrocortisone powder prepared from tablets according to a previously established method. In-hospital preparations were prepared at five medical facilities under different crushing and mixing conditions. After storage in closed bottles, in-use bottles, and laminated paper for 120 days, ingredients stability, drug elution, and content uniformity after packaging were evaluated. All three ingredients were maintained at between 90% and 110% of their initial content for 120 days under packaging conditions of 25 ± 2 °C and 60 ± 5% relative humidity, with no change in dissolution in all formulations made at all five facilities. The content uniformity was also acceptable. The established method may contribute to quality-assured pediatric dosage form modification.

Baclofen is used as a skeletal muscle relaxant for multiple sclerosis patients and pediatric patients with cerebral palsy and is prescribed to pediatric patients at 0.3 to 1.0 mg/kg/dose. Baclofen tablets, an oral drug, are usually administered as a powder in pediatric wards after a formulation change by the pharmacist. However, there is no information about stability and assurance of quality for compounded products. The purpose of this study was to design a 10 mg/g oral powder of baclofen and to investigate the stability and changes in the physical properties of this compounded product. A 10 mg/g baclofen powder was prepared by adding extra-fine crystal lactose hydrate to crushed and filtrated baclofen tablets and was stored in a polycarbonate amber bottle with desiccant or in a coated paper laminated with cellophane and polyethylene. The stability of baclofen at 25 ± 2 °C/60 ± 5%RH was tested for 120 days in 'bottle (closed)', 'bottle (in use)', and 'laminated' storage conditions. Baclofen concentrations ranged from 90.0% to 110.0% of the initial concentration under all storage conditions. No crystallographic or dissolution changes were observed after storage. This information can help with the management of baclofen compounded powder in pharmacies. [ABSTRACT FROM AUTHOR]

The combination of lopinavir/ritonavir remains one of the first-line therapies for the initial antiretroviral regimen in pediatric HIV-infected children. However, the implementation of this recommendation has faced many challenges due to cold-chain requirements, high alcohol content, and unpalatability for ritonavir-boosted lopinavir syrup. In addition, the administration of crushed tablets has shown a detriment for the oral bioavailability of both drugs. Therefore, there is a clinical need to develop safer and better formulations adapted to children's needs. This work has demonstrated, for the first time, the feasibility of using direct powder extrusion 3D printing to manufacture personalized pediatric HIV dosage forms based on 6 mm spherical tablets. H-bonding between drugs and excipients (hydroxypropyl methylcellulose and polyethylene glycol) resulted in the formation of amorphous solid dispersions with a zero-order sustained release profile, opposite to the commercially available formulation Kaletra, which exhibited marked drug precipitation at the intestinal pH. [ABSTRACT FROM AUTHOR]

Background: Imatinib is a protein-tyrosine kinase inhibitor which is currently only commercially available as a tablet dosage form in the strength of 100mg and 400mg. The elaboration of new oral liquid formulations is suitable in pediatrics and for patients who have difficulties to swallow, notably in the absence of commercial forms. This enables the adaptation of dosage and secure the administration. Objectives: The formulation of an oral pediatric solution of imatinib at a concentration of 30 mg/mL and the evaluation of its stability for the treatment of pediatric patients with Philadelphia chromosome positive chronic myeloid leukemia. Methods: The physicochemical stability parameters: appearance, pH, osmolality, and drug content of formulation were evaluated for 30 days when stored at 2–8°C. Concentration of solution was measured with a validated method using high performance liquid chromatography (HPLC) coupled with an absorbance UV detector. Equally, microbiological stability was performed. Results: The remaining imatinib concentration was at least 95% of the initial concentration after 30 days stored in fridge temperature. No changes were observed regarding the physical properties of the formulation during the study period. Conclusions: The stability study showed that the imatinib oral solution at a concentration of 30 mg/mL provides an alternative option at the commercial tablet dosage forms for pediatric patients and patients who have difficulties to swallow. [ABSTRACT FROM AUTHOR]

The lack of appropriate medicines for children has a significant impact on health care practices in various countries around the world, including Thailand. The unavailability of pediatric medicines in hospital formularies causes issues regarding off-label use and extemporaneous preparation, resulting in safety and quality risks relating to the use of medicines among children. This research aimed to identify missing pediatric formulations based on the experience of healthcare professionals in a teaching hospital in northern Thailand. A cross-sectional survey was conducted to collect data on missing pediatric formulations, the reasons for their inaccessibility, their off-label uses, their reactions to the situation, and suggestions to improve access to these identified medications. The survey was distributed to all physicians, nurses, and pharmacists involved in prescribing, preparing, dispensing, and administering pediatric medicines. A total of 218 subjects responded to the survey. Omeprazole, sildenafil, and spironolactone suspension were most often identified as missing formulations for children by physicians and pharmacists. They are unavailable on the Thai market or in any hospital formulary. For nurses, sodium bicarbonate, potassium chloride, and chloral hydrate were the most problematic formulations in terms of preparation, acceptability, and administration. These medicines were difficult to swallow because of their taste or texture. [ABSTRACT FROM AUTHOR]

The availability of age-appropriate oral dosage forms for pediatric patients has remained a challenge. Orodispersible mini-tablets (ODMTs) are a promising delivery system for pediatric patients. The purpose of this work was the development and optimization of sildenafil ODMTs as a new dosage form for the treatment of pulmonary hypertension in children using a design-of-experiment (DoE) approach. A two-factor, three levels (32) full-factorial design was employed to obtain the optimized formulation. The levels of microcrystalline cellulose (MCC; 10–40% w/w) and partially pre-gelatinized starch (PPGS; 2–10% w/w) were set as independent formulation variables. In addition, mechanical strength, disintegration time (DT), and percent drug release were set as critical quality attributes (CQAs) of sildenafil ODMTs. Further, formulation variables were optimized using the desirability function. ANOVA analysis proved that MCC and PPGS had a significant (p < 0.05) impact on CQAs of sildenafil ODMTs with a pronounced influence of PPGS. The optimized formulation was achieved at low (10% w/w) and high (10% w/w) levels of MCC and PPGS, respectively. The optimized sildenafil ODMTs showed crushing strength of 4.72 ± 0.34 KP, friability of 0.71 ± 0.04%, DT of 39.11 ± 1.03 s, and sildenafil release of 86.21 ± 2.41% after 30 min that achieves the USP acceptance criteria for ODMTs. Validation experiments have shown that the acceptable prediction error (

Nicardipine hydrochloride is an anti-hypertensive drug that is used off-label to treat hypertension in children. A previous oral formulation of nicardipine hydrochloride was developed using a commercial vehicle as an excipient. However, ready-to-use vehicles are prone to supply shortages, and their composition may undergo substantial modifications. The aim of this study was to propose a new oral formulation of nicardipine hydrochloride 2 mg/mL using simple excipients. The formulation included hydroxypropylmethylcellulose, simple syrup, polysorbate 80, sodium saccharin, citrate buffer, strawberry flavor and 0.2% potassium sorbate. The uniformity of content was maintained before and after agitation. Nicardipine hydrochloride concentration assessed by HPLC-MS/MS remained above 90% for 365 days before opening and for 28 days after opening. pH and osmolality were maintained throughout the study, and no microbial contamination was observed. The uniformity of mass of the delivered doses was evaluated using four different devices. A new oral formulation of nicardipine hydrochloride 2 mg/mL was developed using simple and safe excipients. Pharmacological and clinical parameters remain to be assessed and compared with those of the previous formulation.

Herbal remedies have grown at an exponential rate since ancient times. Traditional medicines require newer standardization, manufacturing, quality control, and scientifically rigorous research to meet standardization. Bala Sanjeevi Mathirai (BSM) is a Siddha pediatric tablet formulation used for the treatment of cough, fever, vomiting, biliousness, and diarrhoea occurring in children due to dyspepsia. This work was purposed to formulate and standardize BSM as per the guidelines set forth by the regulatory authorities (PLIM). Three validation batches of the formulation were prepared. Tablets were standardized by different physiochemical parameters and evaluated by various studies such as precompression and post compression parameters. All parameters were passed with reference to the standard limits. The set parameters were sufficient to evaluate the tablet and further this could be used as reference standards for the quality control/quality assurance laboratory of the pharmaceutical house. [ABSTRACT FROM AUTHOR]

This study investigated multiparticulate formulation administered over a two-week period of time via the Sympfiny® system with children of ages 1–12 years. The study was conducted with parent–child pairs (N = 120 total participants) following a specific dose strategy to mimic PURIXAN’s dosing guidelines based upon the child’s age. PURIXAN® (mercaptopurine) and Methotrexate have been identified as potential chemotherapy drugs that could benefit from reformulation into multiparticulate. Multiparticulate drugs have advantages as they can be flavorless, and do not require liquid reconstitution and do not require refrigeration. The study included three parts: initial in-person session, 14 days of at-home use, and a final in-person session. The in-person sessions were conducted at HS Design’s (HSD) (Morristown, NJ, USA) offices located in Morristown, New Jersey, where a study moderator captured and recorded all subjective comments by participants and observed device use to identify use errors. The participants were instructed to administer a dose (placebo) for the next 14 days and at each dose delivery to fill out a daily survey regarding their experience. Overall, the cumulative survey responses and feedback collected during the in-person sessions suggest that child participants ages 5–12 years old found multiparticulate to be an acceptable formulation and would be willing to take this medication if they were sick. Over time, more children ages 1–4 did not open their mouths; consistently around 15–20% of 1–4 years olds spat the placebo. However, approximately 95% of parents found the Sympfiny® system acceptable and indicated that they would use it to deliver medication to their child.

Baclofen is used as a skeletal muscle relaxant for multiple sclerosis patients and pediatric patients with cerebral palsy and is prescribed to pediatric patients at 0.3 to 1.0 mg/kg/dose. Baclofen tablets, an oral drug, are usually administered as a powder in pediatric wards after a formulation change by the pharmacist. However, there is no information about stability and assurance of quality for compounded products. The purpose of this study was to design a 10 mg/g oral powder of baclofen and to investigate the stability and changes in the physical properties of this compounded product. A 10 mg/g baclofen powder was prepared by adding extra-fine crystal lactose hydrate to crushed and filtrated baclofen tablets and was stored in a polycarbonate amber bottle with desiccant or in a coated paper laminated with cellophane and polyethylene. The stability of baclofen at 25 ± 2 °C/60 ± 5%RH was tested for 120 days in ‘bottle (closed)’, ‘bottle (in use)’, and ‘laminated’ storage conditions. Baclofen concentrations ranged from 90.0% to 110.0% of the initial concentration under all storage conditions. No crystallographic or dissolution changes were observed after storage. This information can help with the management of baclofen compounded powder in pharmacies.

The combination of lopinavir/ritonavir remains one of the first-line therapies for the initial antiretroviral regimen in pediatric HIV-infected children. However, the implementation of this recommendation has faced many challenges due to cold-chain requirements, high alcohol content, and unpalatability for ritonavir-boosted lopinavir syrup. In addition, the administration of crushed tablets has shown a detriment for the oral bioavailability of both drugs. Therefore, there is a clinical need to develop safer and better formulations adapted to children’s needs. This work has demonstrated, for the first time, the feasibility of using direct powder extrusion 3D printing to manufacture personalized pediatric HIV dosage forms based on 6 mm spherical tablets. H-bonding between drugs and excipients (hydroxypropyl methylcellulose and polyethylene glycol) resulted in the formation of amorphous solid dispersions with a zero-order sustained release profile, opposite to the commercially available formulation Kaletra, which exhibited marked drug precipitation at the intestinal pH.

The lack of appropriate medicines for children has a significant impact on health care practices in various countries around the world, including Thailand. The unavailability of pediatric medicines in hospital formularies causes issues regarding off-label use and extemporaneous preparation, resulting in safety and quality risks relating to the use of medicines among children. This research aimed to identify missing pediatric formulations based on the experience of healthcare professionals in a teaching hospital in northern Thailand. A cross-sectional survey was conducted to collect data on missing pediatric formulations, the reasons for their inaccessibility, their off-label uses, their reactions to the situation, and suggestions to improve access to these identified medications. The survey was distributed to all physicians, nurses, and pharmacists involved in prescribing, preparing, dispensing, and administering pediatric medicines. A total of 218 subjects responded to the survey. Omeprazole, sildenafil, and spironolactone suspension were most often identified as missing formulations for children by physicians and pharmacists. They are unavailable on the Thai market or in any hospital formulary. For nurses, sodium bicarbonate, potassium chloride, and chloral hydrate were the most problematic formulations in terms of preparation, acceptability, and administration. These medicines were difficult to swallow because of their taste or texture.

Hydrocortisone has been utilized in the management of adrenal insufficiency. For pediatric patients, the commercially available enteral form of hydrocortisone tablets (Cortoril®) is administered in powder form after being compounded by a pharmacist. However, the stability and quality of compounded hydrocortisone powder have not been verified. In this study, we formulated a 20 mg/g oral hydrocortisone powder by adding lactose monohydrate to crushed and filtered hydrocortisone tablets and assessed the stability and physical properties of this compounded product in polycarbonate amber bottles or coated paper packages laminated with cellophane and polyethylene. Stability was examined over 120 days in three storage conditions: closed bottle, in-use bottle, and laminated paper. Drug dissolution and powder X-ray diffraction analysis were conducted to assess its physicochemical stabilities. Validated liquid chromatography-diode array detection was used to detect and quantify hydrocortisone and its degradation products. Although impurity B (cortisone) and G (hydrocortisone-21-aldehyde) were found after 120 days of storage, no crystallographic and dissolution changes were noted. Hydrocortisone content was maintained between 90% and 110% of initial contents for 120 days at 25 ± 2 °C and 60 ± 5% relative humidity in all packaging conditions.

Children affected by chronic liver disease exhibit impaired neurocognitive development and growth due to the low absorption and digestion of nutrients. Furthermore, malnutrition is an adverse prognostic factor in liver transplantation as it is associated with an increase in morbidity and mortality. D-α-tocopheryl-polyethylene-glycol-succinate (TPGS) is currently administered per os as a vitamin E source to improve children’s survival and well-being; however, TPGS alone does not reverse spinocerebellar degeneration and lipid peroxidation. To potentiate the effects of TPGS, we loaded micelles with resveratrol (RES), a natural polyphenol, with antioxidant and antiinflammatory activities, which has demonstrated protective action in the liver. Firstly, we investigated the suitability of TPGS to encapsulate RES in micelles by means of a phase-solubility study, then RES-TPGS formulations were prepared via solvent casting and solvent diffusion evaporation methods. RES-TPGS colloidal dispersions showed small mean diameters (12 nm), low polydispersity, and quite neutral Zeta potentials. The formulations showed a sustained drug release and a good drug loading capacity, further confirmed by infrared spectroscopy and differential scanning calorimetry. RES-TPGSs exhibited unaltered antioxidant activity compared to pristine RES via the DPPH assay and a significant reduction in toxicity compared to empty TPGS on HaCaT cells. Thus, RES-TPGS micelles may overcome the challenges of current liver disease therapy by providing more protective effects thanks to the antioxidant activity of RES and by reducing the surfactant toxicity on normal cells.

Abstract Schistosomiasis is a parasitic disease caused by blood flukes. The disease is caused by an inflammatory reaction to parasite eggs retained in the liver, bladder and reproductive organs. According to 2017 World Health Organization (WHO) estimates 220 million people are potentially infected, from which probably 10% are children under 6 years of age. The regular treatment approach of a single, oral dose of 40 mg/kg body weight with praziquantel however, is difficult for children under the age of 6, leaving them without a treatment option. In order to address this important gap in treatment target populations, an international public-private partnership that works on a not-for-profit basis in the field of drug research and development for schistosomiasis was established in 2012. This is called the Pediatric Praziquantel Consortium. Its mission was and continues to be to develop, register and provide access to a suitable pediatric praziquantel formulation for treating schistosomiasis in preschool-age children (3–6 months up to 6 years). The Target Product Profile for the pediatric formulation of praziquantel that would be suitable to treat children as young as 3–6 months was then defined by a group of experts, including members from the Pediatric Praziquantel Consortium partner organizations as well as experts from WHO (as observer) and schistosomiasis endemic countries. The development of the drug is ongoing and the Pediatric Praziquantel Consortium aims to submit the regulatory dossier for marketing approval in endemic countries and WHO prequalification in 2018/19 with approval and product launch for schistosomiasis pediatric case management in key endemic countries in 2019. Ultimately, the goal is for the product to be considered for a large-scale mass distribution program by 2022.

Currently, medications used in children are typically modified from pharmaceutical dosage forms designed for adults. Captopril is widely adapted to liquid formulations for use in hospitals. Its stability in the aqueous medium is reduced since it undergoes oxidation producing captopril disulfide (its main metabolite). The aim of this formulation study was to suggest favorable conditions for the development of a stable captopril formulation. The compatibility between the drug and excipients was evaluated by differential scanning calorimetry analysis (DSC). For studies in solution, different formulations were prepared according to a factorial design varying EDTA concentration, water purity and pH. The resultant formulations were stored at 60°C and analyzed over a twelve-day period using HPLC. The DSC curves obtained suggested, although not conclusive to elucidation, interactions of captopril with citric acid and sucralose. The stability study of these solutions revealed that the variables significantly influenced captopril content, which degraded at zero order kinetics and rates differing by a factor of up to 7 times, where pH proved the most influential factor. Interactions between variables were observed. Therefore, development of a stable captopril formulation is feasible provided EDTA and a buffering agent is used at suitable concentrations (0.08% and pH 3.85).

Shujie Guo,1 Kevin Pham,2 Diana Li,2 Scott R Penzak,3 Xiaowei Dong2 1State Key Laboratory of Medical Genomics, Shanghai Key Laboratory of Hypertension, Ruijin Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People’s Republic of China; 2Department of Pharmaceutical Sciences, 3Department of Pharmacotherapy, University of North Texas Health Science Center, Fort Worth, TX, USA Purpose: The purpose of this study was to develop a novel lipid-based nanotechnology to formulate poorly water-soluble drugs in oral solid granules to improve stability, palatability, and bioavailability. Materials and methods: In one method, we prepared ritonavir (RTV) nanoparticles (NPs) by a microemulsion-precursor method and then converted the RTV NPs to solid granules by wet granulation to produce RTV NP-containing granules. In the other innovative method, we did not use water in the formulation preparation, and discovered novel in situ self-assembly nanoparticles (ISNPs). We prepared RTV ISNP granules that did not initially contain NPs, but spontaneously produced RTV ISNPs when the granules were introduced to water with gentle agitation. We fully characterized these RTV nanoformulations. We also used rats to test the bioavailability of RTV ISNP granules. Finally, an Astree electronic tongue was used to assess the taste of the RTV ISNP granules. Results: RTV NP-containing granules only had about 1% drug loading of RTV in the solid granules. In contrast, RTV ISNP granules achieved over 16% drug loading and were stable at room temperature over 24 weeks. RTV ISNPs had particle size between 160 nm and 300 nm with narrow size distribution. RTV ISNPs were stable in simulated gastric fluid for 2 hours and in simulated intestinal fluid for another 6 hours. The data from the electronic tongue showed that the RTV ISNP granules were similar in taste to blank ISNP granules, but were much different from RTV solution. RTV ISNP granules increased RTV bioavailability over 2.5-fold compared to RTV solution. Conclusion: We successfully discovered and developed novel ISNPs to manufacture RTV ISNP granules that were reconstitutable, stable, and palatable, and improved RTV bioavailability. The novel ISNP nanotechnology is a platform to manufacture oral solid dosage forms for poorly water-soluble drugs, especially for pediatric formulation development. Keywords: ritonavir, pediatric formulation, taste, pharmacokinetics, lipid formulation, drug loading

Clonidine hydrochloride is administered to opioid-addicted mothers' neonates to reduce neonatal abstinence syndrome. It is prescribed off-label to neonates at 0.5-1 µg/kg/6 h, alone or in combination. The commercially injectable form of clonidine—Catapressan® 0.15 mg/mL—is being orally given after an appropriate dilution in water. However, this practice is not suitable for a perfectly safe and accurate administration. The objectives were to design a 10 µg/mL oral solution of clonidine hydrochloride in Inorpha® and to study the stability of this solution by a validated stability-indicating liquid chromatography (LC) method. The chemical, physicochemical and microbiological stability of the compounded formulation stored at 5 ± 3 °C and 25 ± 2 °C was tested over 60 days. The LC method used is specific, linear, accurate and precise. Upon storage between 2 and 8 °C according to classical and 'in use' schedules, the concentrations of clonidine and potassium sorbate (preservative) were found to be between 90.0 and 110.0% of the initial concentration, the pH between 4.4 and 4.7 and no microbial growth was noted. The stability of clonidine hydrochloride oral solution in Inorpha® sets the basis for individualized, easy and safe administration of clonidine in pediatric populations. [ABSTRACT FROM AUTHOR]

Objective:This study proposed the development of oral lyophilisates with respect to pediatric medicine development guidelines, by applying risk management strategies and DoE as an integrated QbD approach. Methods:Product critical quality attributes were overviewed by generating Ishikawa diagrams for risk assessment purposes, considering process, formulation and methodology related parameters. Failure Mode Effect Analysis was applied to highlight critical formulation and process parameters with an increased probability of occurrence and with a high impact on the product performance. To investigate the effect of qualitative and quantitative formulation variables D-optimal designs were used for screening and optimization purposes. Results:Process parameters related to suspension preparation and lyophilization were classified as significant factors, and were controlled by implementing risk mitigation strategies. Both quantitative and qualitative formulation variables introduced in the experimental design influenced the product’s disintegration time, mechanical resistance and dissolution properties selected as CQAs. The optimum formulation selected through Design Space presented ultra-fast disintegration time (5 seconds), a good dissolution rate (above 90%) combined with a high mechanical resistance (above 600 g load). Conclusions:Combining FMEA and DoE allowed the science based development of a product with respect to the defined quality target profile by providing better insights on the relevant parameters throughout development process. The utility of risk management tools in pharmaceutical development was demonstrated. [ABSTRACT FROM PUBLISHER]

Schistosomiasis is a parasitic disease caused by blood flukes. The disease is caused by an inflammatory reaction to parasite eggs retained in the liver, bladder and reproductive organs. According to 2017 World Health Organization (WHO) estimates 220 million people are potentially infected, from which probably 10% are children under 6 years of age. The regular treatment approach of a single, oral dose of 40 mg/kg body weight with praziquantel however, is difficult for children under the age of 6, leaving them without a treatment option. In order to address this important gap in treatment target populations, an international public-private partnership that works on a not-for-profit basis in the field of drug research and development for schistosomiasis was established in 2012. This is called the Pediatric Praziquantel Consortium. Its mission was and continues to be to develop, register and provide access to a suitable pediatric praziquantel formulation for treating schistosomiasis in preschool-age children (3-6 months up to 6 years). The Target Product Profile for the pediatric formulation of praziquantel that would be suitable to treat children as young as 3-6 months was then defined by a group of experts, including members from the Pediatric Praziquantel Consortium partner organizations as well as experts from WHO (as observer) and schistosomiasis endemic countries. The development of the drug is ongoing and the Pediatric Praziquantel Consortium aims to submit the regulatory dossier for marketing approval in endemic countries and WHO prequalification in 2018/19 with approval and product launch for schistosomiasis pediatric case management in key endemic countries in 2019. Ultimately, the goal is for the product to be considered for a large-scale mass distribution program by 2022. [ABSTRACT FROM AUTHOR]

Introduction Amlodipine is an antihypertensive agent recommended for the management of hypertension in children and adolescents. The commercially available tablets of 5 and 10 mg do not provide the necessary flexibility in dosing needed for treating children. Our goal was to develop a pediatric oral solution of amlodipine, using a robust manufacturing process suitable for ex-tempora and larger scale production. Methods The parameters API and preservative content, related substances, appearance and pH were studied under four different storage conditions. Samples were analyzed up to 12 months. Microbiological quality was studied in an 18-week in-use test based on a two-times daily dosing schedule. Results The stability of the formulation was influenced by storage conditions and composition. A formulation containing amlodipine besylate, sucrose syrup and methyl paraben remained physically stable for 12 months at 4 °C with no loss of amlodipine content. Related substances increased during the study but remained below 0.5%. In-use stability was proven up to 18 weeks. Discussion Storage under refrigerated conditions was necessary to prevent precipitation and to obtain an acceptable shelf-life. In conclusion, we have developed and validated an amlodipine oral solution, suitable for the pediatric population. This liquid formulation is preferred over manipulated commercial dosage forms or non-standardized extemporaneously compounded formulations. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop a nanotechnology to formulate a fixed-dose combination of poorly water-soluble drugs in a children-friendly, flexible solid dosage form. For diseases like HIV, pediatric patients are taking multiple drugs for effective treatments. Fixed-dose combinations could reduce pill burdens and costs as well as improving patient adherence. However, development of fixed-dose combinations of poorly water-soluble drugs for pediatric formulations is very challenging. We discovered a novel nanotechnology that produced in situ self-assembly nanoparticles (ISNPs) when the ISNP granules were introduced to water. In this study, antiretroviral drug granules, including lopinavir (LPV) ISNP granules and a fixed-dose combination of LPV/ritonavir (RTV) ISNP granules, were prepared using the ISNP nanotechnology, which spontaneously produced drug-loaded ISNPs in contact with water. Drug-loaded ISNPs had particle size less than 158 nm with mono-dispersed distribution, over 95% entrapment efficiency for both LPV and RTV and stability over 8 h in simulated physiological conditions. Drug-loaded ISNP granules with about 16% of LPV and 4% of RTV were palatable and stable at room temperature over 6 months. Furthermore, LPV/RTV ISNP granules displayed a 2.56-fold increase in bioavailability and significantly increased LPV concentrations in tested tissues, especially in HIV sanctuary sites, as compared to the commercial LPV/RTV tablet (Kaletra®) in rats. Overall, the results demonstrated that the novel ISNP nanotechnology is a promising platform to manufacture palatable, “heat” stable, and flexible pediatric granules for fixed-dose combinations that can be used as sachets and sprinkles. To the best of our knowledge, this is the first report on this kind of novel nanotechnology for pediatric fixed-dose combinations of poorly water-soluble drugs. [ABSTRACT FROM AUTHOR]

Schistosomiasis is a debilitating neglected tropical disease caused by schistosome worms. Global efforts to control schistosomiasis rely predominantly on mass drug administration of the drug praziquantel to populations at risk of infection. We review the history of schistosome drug development and the current position of schistosome drug research. We conclude that with no additional candidates currently in the anti-schistosome drug clinical trial pipeline, a practical and necessary approach is to optimise the health benefits from praziquantel. We offer suggestions of where and how this can be achieved. We also highlight knowledge gaps in the utility of praziquantel particularly in the treatment of chronic schistosomiasis, which includes fibrosis, organomegaly and cervical lesions associated with female genital schistosomiasis. [ABSTRACT FROM PUBLISHER]

This study investigated multiparticulate formulation administered over a two-week period of time via the Sympfiny ® system with children of ages 1-12 years. The study was conducted with parent-child pairs (N = 120 total participants) following a specific dose strategy to mimic PURIXAN's dosing guidelines based upon the child's age. PURIXAN ® (mercaptopurine) and Methotrexate have been identified as potential chemotherapy drugs that could benefit from reformulation into multiparticulate. Multiparticulate drugs have advantages as they can be flavorless, and do not require liquid reconstitution and do not require refrigeration. The study included three parts: initial in-person session, 14 days of at-home use, and a final in-person session. The in-person sessions were conducted at HS Design's (HSD) (Morristown, NJ, USA) offices located in Morristown, New Jersey, where a study moderator captured and recorded all subjective comments by participants and observed device use to identify use errors. The participants were instructed to administer a dose (placebo) for the next 14 days and at each dose delivery to fill out a daily survey regarding their experience. Overall, the cumulative survey responses and feedback collected during the in-person sessions suggest that child participants ages 5-12 years old found multiparticulate to be an acceptable formulation and would be willing to take this medication if they were sick. Over time, more children ages 1-4 did not open their mouths; consistently around 15-20% of 1-4 years olds spat the placebo. However, approximately 95% of parents found the Sympfiny ® system acceptable and indicated that they would use it to deliver medication to their child.

Abstract: Adequate pediatric formulations are a must to ensure compliance to treatment, and safe delivery of the intended dose. Adult formulations may not be suitable for children, and new pediatric formulation(s) must be developed for the pediatric studies, and for market. As the development of pediatric formulations with optimized properties for market might be challenging, preliminary “enabling” formulations might be envisaged for early pediatric studies, prior to the introduction of more elegant market formulations in the confirmatory study. Supportive clinical studies, such as relative bioavailability (RBA) studies may be necessary to establish the bridge from adult and/or enabling formulations to the final pediatric formulation. Late changes to the pediatric formulation will necessitate establishment of bioequivalence (BE) between the two drug products. As failure to demonstrate BE can delay approval, it is strongly advised that the final pediatric formulation(s) be introduced no later than in the pivotal program. RBA studies assessing performance of pediatric formulations are typically performed in adult healthy volunteers, however a possible interplay between age/disease and formulation effects must be taken into account. Formulation bridging based on in vitro approaches might be envisaged under certain circumstances, such as minor formulation changes, development of new dosage strengths, or BCS class-supported biowaivers. [Copyright &y& Elsevier]