Search

Background: The aim of the present study was to investigate qualitatively and quantitatively the elution of substances from polyester-urethane (Invisalign™) aligners and resin composite attachments (Tetric EvoFlow) in vivo., Methods: Patients (n = 11) treated with the aligners and attachments (16 per patient, without other composite restorations) for an average of 20 months, who were planned for attachment removed were enrolled in the study. Patients were instructed to rinse with 50 mL of distilled water upon entry and the rinsing solution was collected (before removal). Then, the attachments were removed with low-speed tungsten carbide burs for adhesive residue removal, a thorough water rinsing was performed immediately after the grinding process to discard grinding particle residues, and subsequently, after a second water-rinsing the solution was collected for analysis (after removal). The rinsing solutions were analyzed for targeted (LC-MS/MS: Bis-GMA, DCDMA, UDMA, BPA) and untargeted (LC-HRMS: screening of leached species and their degradation products) compounds., Results: Targeted analysis revealed a significant reduction in BPA after attachment removal (4 times lower). Bis-GMA, DCDMA, UDMA were below the detection limit before removal but were all detectable after removal with Bis-GMA and UDMA at quantifiable levels. Untargeted analysis reviled the presence of mono-methacrylate transformation products of Bis-GMA (Bis-GMA-M1) and UDMA (UDMA-M1), UDMA without methacrylate moieties (UDMA-M2), and 4-(dimethylamino) benzoic acid (DMAB), the degradation product of the photo-initiator ethyl-4-(dimethylamino) benzoate (EDMAB), all after attachment removal. Several amino acids and endogenous metabolites were also found both before and after removal., Conclusions: Elevated levels of BPA were traced instantaneously in patients treated with Invisalign™ and flowable resin composite attachments for the testing period. BPA was reduced after attachment removal, but residual monomers and resin degradation products were found after removal. Alternative resin formulations and attachment materials may be utilized to reduce eluents., (© 2024. The Author(s).)

The Rapid Alert System for Food and Feed (RASFF) has reported many cases of different UV curing inks components in foodstuffs during the last few years. These contaminants reach foodstuffs mainly by set-off, their principal migration mechanism from the package. Under this premise, this work has tried to characterize the process of migration of two common UV ink components: a photoinitiator (4-Methylbenzophenone) and a coinitiator (Ethyl-4-(dimethylamino) benzoate), from the most common plastic material used in food packaging low-density polyethylene (LDPE) into six different food simulants. The migration kinetics tests were performed at four different common storage temperatures, obtaining the key migration parameters for both molecules: the coefficients of diffusion and partition. The migration process was highly dependent on the storage conditions, the photoinitiator properties and the pH of the foodstuff.

2-Ethylhexyl-4-dimethylaminobenzoate (EHDAB) is a commonly used organic ultraviolet filter. The bioaccumulation and biomagnification of EHDAB were investigated in two aquatic animals, the larvae of midge ( Chironomus riparius ) and crucian carp ( Carassius carassius ), and the metabolic enzyme responses in fish liver were determined. EHDAB in the larvae of midge reached a steady state within 10 days of sediment exposure. The biota-sediment accumulation factors ranged from 0.10 to 0.54, and were inversely proportional to the exposure concentrations. The EHDAB-contaminated larvae were used to feed the crucian carp. Within 28 days of feeding exposure, the EHDAB levels in fish tissues gradually increased with the increase of the exposure concentration, exhibiting an apparent concentration-dependence and time-dependence. The liver and kidneys were the main organs of accumulation, and the biomagnification factors of EHDAB ranged from 8.97 to 11.0 and 6.44 to 10.8, respectively. In addition, EHDAB significantly increased the activities of cytochrome P450 (CYP) 1A, CYP3A and glutathione S-transferase in the fish liver. Our results indicate that EHDAB may pose a risk of biomagnification in an aquatic environment and influence the biological processes of exposed organisms.

A simple method for the simultaneous determination of personal care product ingredients: galaxolide, tonalide, oxybenzone, 4-methylbenzyliden camphor, padimate-o, 2-ethylhexyl methoxycinnamate, octocrylene, triclosan, and methyl triclosan in lettuce by ultrasound-assisted extraction combined with solid-phase microextraction followed by gas chromatography with mass spectrometry was developed. Lettuce was directly extracted by ultrasound-assisted extraction with methanol, this extract was combined with water, extracted by solid-phase microextraction in immersion mode, and analyzed by gas chromatography with mass spectrometry. Good linear relationships (25-250 ng/g, R 2  > 0.9702) and low detection limits (1.0-25 ng/g) were obtained for analytes along with acceptable precision for almost all analytes (RSDs < 20%). The validated method was applied for the determination of personal care product ingredients in commercial lettuce and lettuces grown in soil and irrigated with the analytes, identifying the target analytes in leaves and roots of the latter. This procedure is a miniaturized and environmentally friendly proposal which can be a useful tool for quality analysis in lettuce., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Organic UV filters (OUV-Fs) are increasingly used in sunscreens and personal care products. In the present work, the bioconcentration and multi-biomarker effects of butyl methoxydibenzoylmethane (BM-DBM) and ethylhexyl dimethyl p-aminobenzoate (OD-PABA) were investigated in crucian carp (Carassius auratus). The fish were exposed to various concentrations of BM-DBM (3.88, 35.61, 181.85 and 337.15μg/L), OD-PABA (4.66, 53.83, 264.22 and 459.32μg/L) and their mixture (2.31+2.79, 23.69+26.18, 97.37+134.81 and 193.93+246.08μg/L) for 28 days. The maximal concentrations of two OUV-Fs were detected in the fish liver, followed by the brain, kidney, gill and muscle in most cases. The maximal BCF values of OD-PABA calculated in various exposure concentrations were 0.37 - 101.21 in single exposure groups and 0.11 - 31.09 in mixed exposure groups. Acetylcholinesterase (AChE) activity was significantly inhibited by BM-DBM as well as the mixtures at all of the exposure concentrations and by OD-PABA at higher concentrations (≥264.22μg/L) during 28 days of exposure. The maximal inhibition rates of AChE activity reached 64.04% for BM-DBM, 41.05% for OD-PABA and 61.50% for the mixtures at the highest concentration, which indicated that these two OUV-Fs might damage the central nervous system. Concerning oxidative stress status, BM-DBM and the mixtures significantly increased superoxide dismutase (SOD) and glutathione reductase (GR) activities and inhibited catalase (CAT) activity, while OD-PABA caused a significant increase of GR and CAT activities. AChE and GR activities seemed to be more sensitive biomarkers for BM-DBM and OD-PABA., (Copyright © 2017 Elsevier Inc. All rights reserved.)

The purpose of this study was to elucidate the organic composition and eluates of three resin-based pulp-capping materials in relation to their indications and safety data sheets. Uncured samples of Theracal LC, Ultra-Blend Plus, and Calcimol LC were investigated using gas chromatography-mass spectrometry (GC-MS) and ultra-performance liquid chromatography-mass spectrometry (UPLC-MS). Identification/quantification of 7-d leachables of cured samples was performed using GC-MS for 2-hydroxyethyl methacrylate (HEMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), camphorquinone (CQ), ethylene glycol dimethacrylate (EGDMA), ethyl-4-(dimethylamino)benzoate (DMABEE), and triethylene glycol dimethacrylate (TEGDMA). A similar organic composition was found for Ultra-Blend and Calcimol; however, only Ultra-Blend is indicated for direct pulp-capping. In contrast to the other materials analysed, Theracal contained substances of high molecular weight. The safety data sheets of all materials were incomplete. We detected HEMA, CQ, and TEGDMA in eluates from Ultra-Blend and Calcimol, and it was considered that HEMA might have originated from decomposition of diurethane dimethacrylate (UDMA) in the GC-injector. For Theracal, additives associated with light curing (DMABEE and CQ) were detected in higher amounts (4.11 and 19.95 μg mm -2 ) than in the other materials. Pores were quantified in all samples by micro-computed tomography (micro-CT) analysis, which could influence leaching. The organic substances in the investigated materials might affect their clinical suitability as capping agents, especially for direct capping procedures., (© 2017 Eur J Oral Sci.)

Photoinitiators are widely used to cure ink on packaging materials used in food applications such as cardboards for the packaging of dry foods. Conventional migration testing for long-term storage at ambient temperature with Tenax(®) was applied to paperboard for the following photoinitiators: benzophenone (BP), 4,4'-bis(diethylamino)benzophenone (DEAB), 2-chloro-9H-thioxanthen-9-one (CTX), 1-chloro-4-propoxy-9H-thioxanthen-9-one (CPTX), 4-(dimethylamino)benzophenone (DMBP), 2-ethylanthraquinone (EA), 2-ethylhexyl-4-dimethylaminobenzoate (EDB), ethyl-4-dimethylaminobenzoate (EDMAB), 4-hydroxybenzophenone (4-HBP), 2-hydroxy-4-methoxybenzophenone (HMBP), 2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone (HMMP), 2-isopropyl-9H-thioxanthen-9-one (ITX), 4-methylbenzophenone (MBP) and Michler's ketone (MK). Test conditions (10 days at 60°C) were according to Regulation (EU) No. 10/2011 and showed different migration patterns for the different photoinitiators. The results were compared with the migration in cereals after a storage of 6 months at room temperature. The simulation with Tenax at 60°C overestimated actual migration in cereals up to a maximum of 92%. In addition, the effect of a lower contact temperature and the impact of the Tenax pore size were investigated. Analogous simulation performed with rice instead of Tenax resulted in insufficiently low migration rates, showing Tenax is a much stronger adsorbent than rice and cereals.

Photoinitiators (PIs) are widely used in food packaging materials, can migrate easily from packaging materials to food, and cause food contamination. It is essential to establish a method of determining PIs residues in food. A new method for simultaneously determining 10 kinds of PIs in milk has been established by using solid-phase microextraction (SPME) combined with a simple method of protein precipitation as the pretreatment approach and gas chromatography/mass spectrometry as the detecting technique. The limits of detection for 10 PIs in different milks were between 0.05 and 1.4 μg/L (skimmed milk), between 0.07 and 2.2 μg/L (semi-skimmed milk), between 0.11 and 4.4 μg/L (whole milk), respectively. The recoveries were from 71.5% to 133.5%, and the relative standard deviations were less than 15%. Twelve kinds of packed milk with different brands and fat contents were determined using this method., (© 2016 Institute of Food Technologists®)

The protonation site of para-dimethylaminobenzoic acid (p-DMABA) was investigated using atmospheric pressure ionization methods (ESI and APCI) coupled with collision-induced dissociation (CID), nuclear magnetic resonance (NMR), and computational chemistry. Theoretical calculations and NMR experiments indicate that the dimethyl amino group is the preferred site of protonation both in the gas phase and aqueous solution. Protonation of p-DMABA occurs at the nitrogen atom by ESI independent of the solvents and other operation conditions under typical thermodynamic control. However, APCI produces a mixture of the nitrogen- and carbonyl oxygen-protonated p-DMABA when aprotic organic solvents (acetonitrile, acetone, and tetrahydrofuran) are used, exhibiting evident kinetic characteristics of protonation. But using protic organic solvents (methanol, ethanol, and isopropanol) in APCI still leads to the formation of thermodynamically stable N-protonated p-DMABA. These structural assignments were based on the different CID behavior of the N- and O-protonated p-DMABA. The losses of methyl radical and water are the diagnostic fragmentations of the N- and O-protonated p-DMABA, respectively. In addition, the N-protonated p-DMABA is more stable than the O-protonated p-DMABA in CID revealed by energy resolved experiments and theoretical calculations.

Decreased levels of cell cycle inhibitor p27(Kip1) due to excessive degradation occur in a variety of aggressive human tumors. Since reduced p27(Kip1) expression has been associated with a poor prognosis in many human cancers and resistance to certain antitumor therapies, elevation of p27(Kip1) expression could improve prognosis and prevent excessive cell proliferation. SCF(Skp2) is one of the major ubiquitin E3 ligases responsible for degradation of p27(Kip1). Ubiquitination of p27(Kip1) also requires a small adaptor protein, Cks1, which facilitates substrate recruitment by bridging the interaction between Skp2 and p27(Kip1). It has been shown previously that a direct interaction between Cks1 and Skp2 is required for p27(Kip1) degradation. Accordingly, perturbation of the Skp2-Cks1 interaction may represent an attractive target for pharmacological intervention. Here we describe a high-throughput AlphaScreen assay for discovering small-molecule inhibitors of the Skp2-Cks1 protein-protein interaction in vitro. Two compounds (NSC689857 and NSC681152) were identified and validated through a structure-activity relationship analysis. Both compounds were also shown to inhibit p27(Kip1) ubiquitination in vitro. These studies demonstrate that disruption of the Skp2-Cks1 interaction provides a viable strategy to prevent p27(Kip1) ubiquitination and may potentially be useful for the control of excessive degradation of this cell cycle inhibitor in tumor cells.

Three hundred and fifty foodstuffs packaged in printed paper/board were purchased from UK retail outlets. Solvent extracts of all foods and associated quality assurance samples were analysed by gas chromatography-mass spectrometry (GC-MS) to determine the presence and concentrations of 20 printing ink compounds: benzophenone, 4-methylbenzophenone, 2-methylbenzophenone, 3-methylbenzophenone, 4-hydroxybenzophenone, 2-hydroxybenzophenone, 4-phenylbenzophenone, methyl-2-benzoylbenzoate, 1-hydroxycyclohexyl phenyl ketone, 2-isopropylthioxanthone, 4-isopropylthioxanthone, 2,4-diethyl-9H-thioxanthen-9-one, 2,2-dimethoxy-2-phenylacetophenone, 2-methyl-4'-(methylthio)-2-morpholinopropiophenone, 4-(4-methylphenylthio)benzophenone, ethyl-4-dimethylaminobenzoate, 2-ethylhexyl-4-(dimethylamino)benzoate, N-ethyl-p-toluene-sulphonamide, triphenyl phosphate and di-(2-ethylhexyl) fumarate. The presence of one or more of the compounds benzophenone, 4-phenylbenzophenone, methyl-2-benzoylbenzoate, 1-hydroxycyclohexyl phenyl ketone, 2,2-dimethoxy-2-phenylacetophenone, 4-(4-methylphenylthio)benzophenone, ethyl-4-dimethylaminobenzoate, 2-ethylhexyl-4-dimethylaminobenzoate and triphenyl phosphate was confirmed in some food samples. Analysis of the associated packaging material was also carried out to confirm whether or not it was likely that the occurrence of these compounds in the foods was due to migration from the printed paper/board packaging. With the exception of triphenyl phosphate, detected in one foodstuff, all the packaging material contained the substance(s) found in the food.

The quantity of photoinitiators (PIs) migrated into hydrosoluble foods from packaging materials is usually very small. It is hardly detectable by using the current methods. For this reason, the article describes a new effective method for detecting the migration of PIs. In this method, the migration experiment was done in aqueous food simulation. After the PIs in printing inks used in food contact materials were extracted from the solution via solid-phase microextraction (SPME) using 65 microm polydimethylsiloxane/divinylbenzene (PDMS-DVB)-coated fiber, their migration amounts were determined by gas chromatography-mass spectrometry (GC-MS) in the selected ion monitoring mode (SIM). The PIs determined by SPME/GC-MS were benzophenone (BP), 1-hydroxycyclohexyl-phenylketone (CPK), ethyl-4-dimethyl-aminobenzoate (EDMAB), 4-methylbenzophenone (4-MBP), 2, 2-dimethoxy-2-phenylacetophenone (2,2-DMPA), methyl 2-benzoylbenzoate (OMBB) and 2-ethylhexyl-4-dimethyl-aminobenzoate (EHDAB). The limits of detection (S/N = 3) were between 0.0012 and 0.0069 microg/L. The linearity ranged from 0.03 to 1.0 microg/L (r2 > 0.9909). The recoveries were in the range from 70.8% to 112.0% (n = 3) with the relative standard deviations no more than 14.0%. Twenty samples were tested by using this developed method. The analytical results showed that BP was detected in all samples, and the migration amounts of BP were from 0.002 to 0.074 microg/dm2; 4-MBP was detected in ten samples, and the migration amounts of 4-MBP were from 0.006 to 0.019 microg/dm2; CPK was detected in three samples, and its amounts were 0.005, 0.005, 0.007 microg/dm2; 2,2-DMPA was detected as 0.009 microg/dm2 in one sample. The determination of real samples showed this method is feasible. The method is sensitive, simple and free from organic solvents. It could make reference to migrating determination of PIs in printing inks on food packaging surface.