Search

Recently, a scientific comparison of flatness measuring instruments at European National Metrology Institutes (NMIs) was performed in the framework of EURAMET. The specimen was a well-polished optical surface with a maximum measurement aperture of 150 mm in diameter. Here, we present an evaluation concept, which allows the determination of a mean flatness map taking into account different lateral resolutions of the instruments and different orientations of the specimen during measurement. We found that all measurements are in agreement with the mean flatness map within the uncertainty intervals stated by the participants. The aim of this scientific comparison is to specify an appropriate operation and evaluation procedure for future comparisons.

Within the frame of a European project called Eura-Thermal, the general objective was to upgrade the regional metrological infrastructure (Bosnia & Herzegovina, Croatia, Ireland, Serbia...) with new capabilities, especially in the field of thermal measurements. This paper highlights the strategy used for improving in the short term, scientific knowledge transfer and the capabilities of different emerging institutes. Furthermore, as a main output, the impacts and benefit for Industry and for the end-users are also presented as examples. © 2018 Institute of Physics Publishing. All rights reserved. XXII World Congress of the International Measurement Confederation (IMEKO 2018)

The control and measurement of humidity is important for many industrial applications and to ensure the appropriate storage of materials and products. Humidity measurement techniques are diverse and each presents different challenges for use and calibration for a range of pressures and gases. Over the past few years, the development of humidity sensors and apparatus has matured to a level where traceable calibration is beneficial to all industries in which humidity and moisture measurement and control are important. This paper deals with a European project in which the overall objective is to develop or extend the measurement and research capabilities of the participating emerging NMI/DIs’ countries in the field of humidity measurements, where access to these types of facilities is currently limited.

To ensure the validity of their national standards, National Metrology Institutes, NMIs, participate regularly in international comparisons. In the area of neutron metrology, Section III of the Consultative Committee for Ionizing Radiation is in charge of the organization of these comparisons. From September 2011 to October 2012, the eleventh key comparison, named CCRI(III)-K11, took place at the AMANDE facility of the LNE-IRSN, in France. Participants from nine NMIs came with their own primary reference instruments, or instruments traceable to primary standards, with the aim of determining the neutron fluence, at 1 m distance from the target in vacuum, per monitor count at four monoenergetic neutron fields: 27 keV, 565 keV, 2.5 MeV and 17 MeV. The key comparison reference values (KCRV) were evaluated as the weighted mean values of the results provided by seven participants. The uncertainties of each KCRV are between 0.9 % and 1.7 %. The degree of equivalence (DoE), defined as the deviation of the result reported by the laboratories for each energy from the corresponding KCRV, and the associated expanded uncertainty are also reported and discussed.

The 8th International Comparison of Absolute Gravimeters (ICAG2009) took place at the headquarters of the International Bureau of Weights and Measures (BIPM) from September to October 2009. It was the first ICAG organized as a key comparison in the framework of the CIPM Mutual Recognition Arrangement of the International Committee for Weights and Measures (CIPM MRA) (CIPM 1999). ICAG2009 was composed of a Key Comparison (KC) as defined by the CIPM MRA, organized by the Consultative Committee for Mass and Related Quantities (CCM) and designated as CCM.G-K1. Participating gravimeters and their operators came from national metrology institutes (NMIs) or their designated institutes (DIs) as defined by the CIPM MRA. A Pilot Study (PS) was run in parallel in order to include gravimeters and their operators from other institutes which, while not signatories of the CIPM MRA, nevertheless play important roles in international gravimetry measurements. The aim of the CIPM MRA is to have international acceptance of the measurement capabilities of the participating institutes in various fields of metrology. The results of CCM.G-K1 thus constitute an accurate and consistent gravity reference traceable to the SI (International System of Units), which can be used as the global basis for geodetic, geophysical and metrological observations of gravity. The measurements performed afterwards by the KC participants can be referred to the international metrological reference, i.e. they are SI-traceable. The ICAG2009 was complemented by a number of associated measurements: the Relative Gravity Campaign (RGC2009), high-precision levelling and an accurate gravity survey in support of the BIPM watt balance project. The major measurements took place at the BIPM between July and October 2009. Altogether 24 institutes with 22 absolute gravimeters (one of the 22 AGs was ultimately withdrawn) and nine relative gravimeters participated in the ICAG/RGC campaign. This paper is focused on the absolute gravity campaign. We review the history of the ICAGs and present the organization, data processing and the final results of the ICAG2009. After almost thirty years of hosting eight successive ICAGs, the CIPM decided to transfer the responsibility for piloting the future ICAGs to NMIs, although maintaining a supervisory role through its Consultative Committee for Mass and Related Quantities. © 2012 BIPM & IOP Publishing Ltd.

To realize the ITS-90 according to its definition, among others, the melting and freezing temperatures of ideally pure metals are needed. Therefore, many national metrology institutes (NMIs) utilize a group of cells instead of one single cell as the national reference for each temperature. With direct fixed-point cell comparisons on a regular basis, it is feasible to account for the small differences between the individual fixed-point temperatures and to detect possible temperature drifts of the cells. At PTB (the German NMI), in recent years, these groups of national standard cells and the so-called transfer cells for calibrations have been complemented by newly developed slim fixed points. These cells typically contain 75% to 80% less fixed-point material compared with standard cells. Slim cells are used for homogeneity investigations of large batches of fixed-point material, for doping experiments to determine the influence of very small amounts of impurities on the fixed-point temperature with very small uncertainties, and for the investigation of contamination or purification effects after the manufacture of a fixed-point cell. These investigations have shown that the main limitation of slim cells is the quality of the phase boundary. The small dimensions of the cell do not allow the formation of a closed phase boundary (or even two of them). However, this can be compensated using a quasi-adiabatic realization procedure, and in this way, uncertainties comparable to those of standard fixed-point cells can be achieved. In this article, the design of the cells as well as typical measurement results and uncertainties for the direct comparison of fixed-point cells of both types, the standard size and slim design, are presented. © 2011 Springer Science+Business Media, LLC.