Search

The incidence of laryngeal tuberculosis has increased gradually in recent years. Laryngeal tuberculosis has strong infectivity and atypical clinical manifestations. Hence, establishing the early diagnosis of laryngeal tuberculosis is considered difficult, resulting in the high rate of misdiagnosis of laryngeal tuberculosis and increased rates of tuberculosis infection.

Fungal and mycobacterial skin infections are common in immunocompromised patients and patients with febrile neutropenia, since the patients' ability to control localized infection is diminished by the disease. The similarity of the lesions caused by these organisms conduces to difficulty of differential diagnosis. Although a histopathological examination and a microbial culture are standard methods for laboratory diagnosis of skin infection, the methods have drawbacks. Histopathological examination yields low positive results, while microbial culture is time-consuming and might result in no growth, causing delayed treatment. This study aimed to develop and evaluate an in-house rapid polymerase chain reactionrestriction fragment length polymorphism (PCR-RFLP) for the detection and identification of fungal and mycobacterial pathogens in resource-limited laboratories. A total of 26 typed species of human pathogenic fungi and 12 species of mycobacteria were used. Strain differentiation was analyzed by using multiplex PCR-RFLP. The internal transcript spacer region (ITS) of fungi and heat-shock protein 65 (hsp65) gene of mycobacteria were amplified using ITS1-ITS4 and Tb11-Tb12 universal primers, respectively. The RFLP patterns were examined at genus-specific and species-specific level. No crossamplification was observed between fungal and mycobacterial tested strains, nor any specific binding between primers and human DNA. It was concluded that the multiplex PCR-RFLP method developed in this study can be used as a molecular diagnostic test for fungal and mycobacterial species identification. In the future, this technique may be useful for detecting fungal and mycobacterial infection directly from clinical specimens. [ABSTRACT FROM AUTHOR]

Background: Rapid identification of mycobacteria has been made possible with matrix assisted laser desorption ionization time-of-flight (MALDI-TOF) in recent years. Working with high concentrations of mycobacteria in a PC-3 containment facility makes MALDI-TOF cumbersome and costly. Therefore removing the inactivated isolate's protein extract from the PC-3 facility is needed for efficient identification in a routine PC-2 laboratory. Methods: This work describes a novel chemical and mechanical disruption protein extraction method, which provides reliable MALDI-TOF results from solid and liquid media, while ensuring laboratory safety. Results: When compared to sequencing results, 93.9% of the clinical isolates were identified in LJ media and 89% of the clinical isolates were identified in MGIT media. Conclusion: The MIPE protocol produces a high quality protein extract with improved isolate identification without compromising result turn-around-times or laboratory safety.

Introduction ‒ The incidence of laryngeal tuberculosis has increased gradually in recent years. Laryngeal tuberculosis has strong infectivity and atypical clinical manifestations. Hence, establishing the early diagnosis of laryngeal tuberculosis is considered difficult, resulting in the high rate of misdiagnosis of laryngeal tuberculosis and increased rates of tuberculosis infection. Objective ‒ This study aimed to describe a case of laryngeal tuberculosis detected using the mycobacteria gene chips technology, facilitating the early diagnosis and the treatment of laryngeal tuberculosis. Case presentation ‒ A 27-year-old woman presented with a 7-day history of hoarseness, with a normal routine blood chemistry test and chest computed tomography results. Histological analysis of the vocal cord biopsy showed granulomatous inflammation and the negative acid-fast stain test. The mycobacteria gene chips method was used to directly examine the vocal cord tissue treated with homogenate, and the Mycobacterium tuberculosis was successfully identified. Thus, the early diagnosis of laryngeal tuberculosis and the drug sensitivity of rifampin and isoniazid were confirmed. The patient recovered after undergoing a 1-year standard anti-tuberculosis therapy. Conclusions ‒ Mycobacterial identification on homogenised biopsy using the mycobacteria gene chips method significantly facilitates the early diagnosis and the treatment of tuberculosis. [ABSTRACT FROM AUTHOR]

Matrix-assisted laser desorption ionization–time-of-flight mass spectrometry is a quick and accurate method for mycobacterial identification from protein extracts. Our new one-step extraction method successfully reduced routine multistep extraction procedure time from over 60 min to under 10 min and used only 1 μL loopful of mycobacteria while providing clinically acceptable identification scores (≥1.8). Overall, 86.8% and 4.4% of mycobacteria isolates (n = 68) were identified to the species/complex and genus levels, respectively, by one-step loop extraction method, comparable to the routine extraction method. Viability studies confirmed killing of mycobacterial isolates after 5 min in the extraction solution replacing lengthy heat killing step. Retrospective 7-month data analysis showed 100% of rapidly and slowly growing mycobacterial isolates were identified to the species/complex level by rapid extraction methods. Our rapid extraction methods substantially reduced processing time and microbial biomass required for testing without sacrificing quality and accuracy of mycobacterial identification. [ABSTRACT FROM AUTHOR]

Objective: Nontuberculous mycobacteria (NTM) often cause disease that is clinically indistinguishable from tuberculosis. Specific identification is important as treatment varies according to Mycobacterium species causing the infection. This study used multiplex PCR (mPCR) assay for rapid differentiation of mycobacterial growth indicator tube 960 system (MGIT) cultures as Mycobacterium tuberculosis (MTB) or NTM together with INNO LiPA Mycobacteria v2 assay (LiPA) and/or PCR sequencing of rDNA for species-specific identification of selected MTB and all NTM isolates in Kuwait.Materials and Methods: DNA was extracted from MGIT cultures (n = 1,033) grown from 664 pulmonary and 369 extrapulmonary specimens from 1,033 suspected tuberculosis patients. mPCR was performed to differentiate MTB from NTM. LiPA was performed and results were interpreted according to kit instructions. rDNA was amplified and sequenced by using panmycobacterial primers.Results: mPCR identified 979 isolates as MTB, 53 as NTM and 1 isolate as mixed culture. LiPA and/or PCR sequencing confirmed 112 of 979 selected isolates as MTB. Mixed culture contained M. tuberculosis and M. fortuitum. LiPA yielded 12 patterns and identified 10 species/species complexes among 47 NTM, M. kansasii + M. scrofulaceum in one culture and 5 isolates only at genus level. PCR sequencing yielded more specific identification for 22 isolates at the species/subspecies level.Conclusions: mPCR rapidly differentiated MTB from NTM. LiPA identified 44 of 52 NTM isolates at the species/species complex level and 2 mixed cultures. PCR sequencing yielded more specific identification at the species/subspecies level. Rapid differentiation as MTB or NTM by mPCR, followed by species-specific NTM identification by LiPA/PCR sequencing is suitable for the proper management of mycobacterial infections in Kuwait. [ABSTRACT FROM AUTHOR]

Background: Rapid identification of mycobacteria has been made possible with matrix assisted laser desorption ionization time-of-flight (MALDI-TOF) in recent years. Working with high concentrations of mycobacteria in a PC-3 containment facility makes MALDI-TOF cumbersome and costly. Therefore removing the inactivated isolate's protein extract from the PC-3 facility is needed for efficient identification in a routine PC-2 laboratory. Methods: This work describes a novel chemical and mechanical disruption protein extraction method, which provides reliable MALDI-TOF results from solid and liquid media, while ensuring laboratory safety. Results: When compared to sequencing results, 93.9% of the clinical isolates were identified in LJ media and 89% of the clinical isolates were identified in MGIT media. Conclusion: The MIPE protocol produces a high quality protein extract with improved isolate identification without compromising result turn-around-times or laboratory safety. [ABSTRACT FROM AUTHOR]

The identification of mycobacteria is essential because tuberculosis (TB) and mycobacteriosis are clinically indistinguishable and require different therapeutic regimens. The traditional phenotypic method is time consuming and may last up to 60 days. Indeed, rapid, affordable, specific and easy-to-perform identification methods are needed. We have previously described a polymerase chain reaction-based method called a mycobacteria mobility shift assay (MMSA) that was designed for Mycobacterium tuberculosis complex (MTC) and nontuberculous mycobacteria (NTM) species identification. The aim of this study was to assess the MMSA for the identification of MTC and NTM clinical isolates and to compare its performance with that of the PRA-hsp65 method. A total of 204 clinical isolates (102 NTM and 102 MTC) were identified by the MMSA and PRA-hsp65. For isolates for which these methods gave discordant results, definitive species identification was obtained by sequencing fragments of the 16S rRNA and hsp65 genes. Both methods correctly identified all MTC isolates. Among the NTM isolates, the MMSA alone assigned 94 (92.2%) to a complex or species, whereas the PRA-hsp65 method assigned 100% to a species. A 91.5% agreement was observed for the 94 NTM isolates identified by both methods. The MMSA provided correct identification for 96.8% of the NTM isolates compared with 94.7% for PRA-hsp65. The MMSA is a suitable auxiliary method for routine use for the rapid identification of mycobacteria.

Mycobacterial identification using MALDI-ToF MS (MALDI) has been hindered by inadequate extraction methods. Adaptive Focused Acoustics™ uses concentrated ultrasonic energy to achieve cellular disruption. Using this technology, we developed a rapid mycobacterial inactivation/protein extraction method for MALDI-based identification. Agreement for identification to the species level versus conventional identification was stratified by log confidence cut-offs of ≥2.0, ≥ 1.8, or ≥1.7. A total of 182 mycobacterial isolates were tested. Complete inactivation of all species/strains was achieved after 2 min. Using a log confidence cut-off of ≥2.0, overall agreement for the commercial method (CM) was 41.7% versus 66.7% for the novel method (NM). For the CM, agreement increased to 66.7% and 83.3% using log confidence cut-offs of ≥1.8 and ≥1.7, respectively; for the NM, agreement was 100% for both cut-offs with all isolates. With no alteration to the existing database, overall agreement for the NM was 83.4%, largely due to low scores for clinical isolates of M. chelonae and M. mucogenicum. Addition of spectra from a single clinical strain of each species to the existing database increased overall agreement to 93.1%. [ABSTRACT FROM AUTHOR]

Culture in enriched broth, as well as on a solid medium, is recommended for primary isolation of mycobacteria. With the introduction of liquid mycobacterial culture methods, a substantial workload regarding the identification of culture-recovered mycobacterial species, particularly Mycobacterium tuberculosis complex (MTC), has been imposed on our laboratory. We thus developed a triplex, real-time PCR coupled with pyrosequencing assay that can directly identify mycobacterial species from liquid media, which can reduce the workload. In this assay, real-time PCR simultaneously detects MTC and Mycobacterium xenopi , and amplifies the region of 16S rRNA gene containing hypervariable region A for pyrosequencing analysis; subsequent, pyrosequencing identifies many other nontuberculous mycobacteria. The assay was evaluated using 333 DNA samples directly prepared from liquid media, including 24 reference strains and 309 clinical isolates. Three hundred and twenty-eight (98.5%) of the 333 samples were correctly identified. The remaining five were determined as indeterminate. In conclusion, this coupled assay would be an alternative method for rapid identification of mycobacteria directly from liquid media in a clinical laboratory with a high workload in regions where tuberculosis is endemic. [ABSTRACT FROM AUTHOR]