Search

Proton exchange membrane fuel cells (PEMFCs) have garnered significant attention due to their high efficiency and low emissions. However, PEMFC always suffers mass transfer and water management in performance improvement. Herein, an integrated gas diffusion layer (GDL) with wavy channel and micro‐tunneled rib is designed and prepared to achieve faster and gentler mass transfer and excellent water management capability by laser engraving. Outstandingly, the new integrated GDL can use the back pressure of air as low as 0 and 50 kPa to respectively achieve 80% and 90% of fuel cell performance realized under pure oxygen. Such high performance is mainly due to the turbulent flow caused by wavy channel and express removing pathway of liquid water provided by micro‐tunneled rib. Moreover, the new integrated GDL also shows wide humidity tolerance from 40% to 100% and a very high specific volume power density of 16,300 W L−1 due to the thin thickness of new integrated GDL. This new integrated GDL is expected to be widely used in PEMFC and other energy conversion devices. [ABSTRACT FROM AUTHOR]

Abstract Proton exchange membrane fuel cells (PEMFCs) have garnered significant attention due to their high efficiency and low emissions. However, PEMFC always suffers mass transfer and water management in performance improvement. Herein, an integrated gas diffusion layer (GDL) with wavy channel and micro‐tunneled rib is designed and prepared to achieve faster and gentler mass transfer and excellent water management capability by laser engraving. Outstandingly, the new integrated GDL can use the back pressure of air as low as 0 and 50 kPa to respectively achieve 80% and 90% of fuel cell performance realized under pure oxygen. Such high performance is mainly due to the turbulent flow caused by wavy channel and express removing pathway of liquid water provided by micro‐tunneled rib. Moreover, the new integrated GDL also shows wide humidity tolerance from 40% to 100% and a very high specific volume power density of 16,300 W L−1 due to the thin thickness of new integrated GDL. This new integrated GDL is expected to be widely used in PEMFC and other energy conversion devices.

Abstract: There is a continuing challenge in improving the separation speed while keeping both the resolution high and the back pressure low in high performance liquid chromatography (HPLC). The recent renaissance of core–shell (or fused-core) silica particles has shown great promise in this respect. However, the fused-core silica particles are typically synthesized by the time-consuming multiple-step layer-by-layer technique. An one-pot synthesis of spheres-on-sphere (SOS) silica microspheres is presented here. The preparation parameters including Si precursors, mixing methods (magnetic stirring, mechanical stirring and homogenization), heating (microwave heating and conventional heating), and reaction temperature are investigated in order to control the morphology and improve the size distribution of the SOS particles. The improvement and influence on SOS morphology, particle size and particle size distribution are discussed. Furthermore, the calcined and modified SOS particles are packed into stainless steel columns, which are then assessed for the separation of various test mixtures containing small molecules and proteins under normal phase, reversed phase, and HILIC conditions. The HPLC tests demonstrate fast and efficient separation with very low back pressure, suggesting that SOS particles are a type of new and highly promising packing materials for liquid chromatography. [Copyright &y& Elsevier]