Search

The emissions from five commonly used building products were studied in small-scale test chambers over a period of 50 days. The odor intensity was assessed by a sensory panel and the concentrations of selected volatile organic compounds (VOCs) of concern for the indoor air quality were measured. The building products were three floor coverings: PVC, floor varnish on beechwood parquet and nylon carpet on a latex foam backing; an acrylic sealant, and a waterborne wall paint on gypsum board. The impacts of the VOC concentration in the air and the air velocity over the building products on the odor intensity and on the emission rate of VOCs were studied. The emission from each building product was studied under two or three different area-specific ventilation rates, i.e. different ratios of ventilation rate of the test chamber and building product area in the test chamber. The air velocity over the building product samples was adjusted to different levels between 0.1 and 0.3 m s-1. The origin of the emitted VOCs was assessed in order to distinguish between primary and secondary emissions. The results show that it is reasonable after an initial period of up to 14 days to consider the emission rate of VOCs of primary origin from most building products as being independent of the concentration and of the air velocity. However, if the building product surface is sensitive to oxidative degradation, increased air velocity may result in increased secondary emissions. The odor intensity of the emissions from the building products only decayed modestly over time. Consequently, it is recommended to use building products which have a low impact on the perceived air quality from the moment they are applied. The odor indices (i.e. concentration divided by odor threshold) of primary VOCs decayed markedly faster than the corresponding odor intensities. This indicates that the secondary emissions rather than the primary emissions, are likely to affect the perceived air quality in the long run. Some of the building products continued to affect the perceived air quality despite the concentrations of the selected VOCs resulted in odor indices less than 0.1. Therefore, odor indices less than 0.1 as an accept criterion cannot guarantee that a building product has no impact on the perceived air quality.

I mange bygninger er luftkvaliteten utilfredsstillende, luften virker ofte irriterende tung og kvalm. En tidligere undersøgelse - Rådhusundersøgelsen - har vist, at tilstedeværelsen af materialer med stor kapacitet for deponering af forureninger - udtrykt ved låddenfaktoren - kan have stor indflydelse på luftkvaliteten i et rum. Meddelelsen beskriver udviklingen og opbygningen af en prøvestand i SBI's laboratorium. I prøvestanden er det muligt at undersøge låddenfaktorens virkningsmekanisme. Resultaterne af en undersøgelse af deponeringen af luftbårne forureninger på to typer gulvtæppefibre er også med i Meddelelsen, der især henvender sig til bygge- og indeklimaforskere.

The exposure-response relationship between the concentration of air pollutants and perceived air quality was studied for eight materials often found indoors and for a mixture of three of the materials. Samples of the materials were placed in a ventilated test chamber. The exhaust air from the test chamber was diluted with different rates of unpolluted air to obtain five different concentrations of polluted air. A sensory panel assessed the perceived quality of the five concentrations of polluted air. The exposure-response relationship differed between the materials and also from the corresponding relationship for human bioeffluents. The exposure-response relationships can be described by straight lines in a log-probit plot and be defined by two constants characteristic for each material. Determination of the two constants characterizing each material requires sensory assessments at least at two pollution concentrations. The sensory pollution load for a material may change with the pollution concentration in the air. The use of a simple measurement method based on a dilution system connected to a ventilated small-scale test chamber is proposed to characterize the emissions from materials in sensory and chemical terms.