Search

Pigmented microalgae inhabiting snow and ice environments lower the albedo of glacier and ice-sheet surfaces, significantly enhancing surface melt. Our ability to accurately predict their role in glacier and ice-sheet surface mass balance is limited by the current lack of empirical data to constrain their representation in predictive models. Here we present new empirical optical properties for snow and ice algae and incorporate them in a radiative transfer model to investigate their impact on snow and ice surface albedo. We found ice algal cells to be more efficient absorbers than snow algal cells, but their blooms had comparable impact on surface albedo due to the different photic conditions of their habitats. We then used the model to reconstruct the effect of ice algae on bare ice albedo spectra collected at our field site in southern Greenland, where blooms dropped the albedo locally by between 3 and 43%, equivalent to 1–10 L m$^{-2}$ d$^{-1}$ of melted ice. Using the newly parametrized model, future studies could investigate biological albedo reduction and algal quantification from remote hyperspectral and multispectral imagery.

Pigmented microalgae inhabiting snow and ice environments lower the albedo of glacier and ice-sheet surfaces, significantly enhancing surface melt. Our ability to accurately predict their role in glacier and ice-sheet surface mass balance is limited by the current lack of empirical data to constrain their representation in predictive models. Here we present new empirical optical properties for snow and ice algae and incorporate them in a radiative transfer model to investigate their impact on snow and ice surface albedo. We found ice algal cells to be more efficient absorbers than snow algal cells, but their blooms had comparable impact on surface albedo due to the different photic conditions of their habitats. We then used the model to reconstruct the effect of ice algae on bare ice albedo spectra collected at our field site in southern Greenland, where blooms dropped the albedo locally by between 3 and 43%, equivalent to 1–10 L m $^{-2}$ d $^{-1}$ of melted ice. Using the newly parametrized model, future studies could investigate biological albedo reduction and algal quantification from remote hyperspectral and multispectral imagery. [ABSTRACT FROM AUTHOR]

Distant glacial areas are interconnected by a complex system of fractures and water channels which run in the glacier interior and characterize the englacial realm. Water can slowly freeze in these channels where the slow freezing excludes air bubbles giving the ice a clear aspect. This ice is uplifted to the surface ablation zone by glacial movements and can therefore be observed in the form of clear surface ice bands. We employed an indirect method to sample englacial water by coring these ice bands. We were able, for the first time, to compare microbial communities sampled from clear (i.e. frozen englacial water bands) and cloudy ice (i.e. meteoric ice) through 16S rRNA gene sequencing. Although microbial communities were primarily shaped and structured by their spatial distribution on the glacier, ice type was a clear secondary factor. One area of the glacier, in particular, presented significant microbial community clear/cloudy ice differences. Although the clear ice and supraglacial communities showed typical cold-adapted glacial communities, the cloudy ice had a less defined glacial community and ubiquitous environmental organisms. These results highlight the role of englacial channels in the microbial dispersion within the glacier and, possibly, in the shaping of glacial microbial communities.

Distant glacial areas are interconnected by a complex system of fractures and water channels which run in the glacier interior and characterize the englacial realm. Water can slowly freeze in these channels where the slow freezing excludes air bubbles giving the ice a clear aspect. This ice is uplifted to the surface ablation zone by glacial movements and can therefore be observed in the form of clear surface ice bands. We employed an indirect method to sample englacial water by coring these ice bands. We were able, for the first time, to compare microbial communities sampled from clear (i.e. frozen englacial water bands) and cloudy ice (i.e. meteoric ice) through 16S rRNA gene sequencing. Although microbial communities were primarily shaped and structured by their spatial distribution on the glacier, ice type was a clear secondary factor. One area of the glacier, in particular, presented significant microbial community clear/cloudy ice differences. Although the clear ice and supraglacial communities showed typical cold-adapted glacial communities, the cloudy ice had a less defined glacial community and ubiquitous environmental organisms. These results highlight the role of englacial channels in the microbial dispersion within the glacier and, possibly, in the shaping of glacial microbial communities. [ABSTRACT FROM AUTHOR]

To understand the geological origins of minerals in cryoconite and the nutrients sources for microbes on glaciers, we analyzed the Sr–Nd isotopic ratios of the four mineral fractions in cryoconites including saline, carbonate, phosphate, silicate and the organic fraction obtained from Gulkana Glacier in Alaska. The isotopes in the silicate mineral fraction exhibited spatial variation within the glacier (87Sr/86Sr: 0.704533–0.709563, εNd (0): −16.0 to 0.5), which can be explained by the different mixing ratios of the two distinct sources: one of the sources is lateral and terminal moraines or soil, and the other is the medial moraine of the glacier. The minerals in the cryoconite at the lower sites in the glacier are likely derived from the former source, whereas those at the upper sites are from latter sources. The mineralogical and elemental compositions also support mixing of the silicate minerals from the two local sources. The Sr isotopic ratios of the organic fraction also showed spatial variation on the glacier in the middle sites – a trend similar to those of the phosphate fraction. The results suggest that the organic matter is mostly the byproducts of microbes using the phosphate minerals as a nutrient source.

Cryoconite holes are water-filled cylindrical holes formed on ablation ice surfaces and commonly observed on glaciers worldwide. Temporal changes of cryoconite holes characteristically

Cryoconite holes are small depressions of the glacier surface filled with melting water and with a wind-blown debris on the bottom. These environments are considered hot spots of biodiversity and biological activities on glaciers and host communities dominated by bacteria. Most of the studies on cryoconite holes assume that their communities are stable. However, evidence of seasonal variation in cryoconite hole ecological communities exists. We investigated the variation of the bacterial communities of cryoconite holes of Forni Glacier (Central Italian Alps) during the melting seasons (July–September) 2013 and 2016, for which samples at three and five time-points, respectively were available. Bacterial communities were characterized by high-throughput Illumina sequencing of the hypervariable V5−V6 regions of 16S rRNA gene, while meteorological data were obtained by an automatic weather station. We found consistent trends in bacterial communities, which shifted from cyanobacteria-dominated communities in July to communities dominated by heterotrophic orders in late August and September. Temperature seems also to affect seasonal dynamics of communities. We also compared bacterial communities at the beginning of the melting season across 4 years (2012, 2013, 2015 and 2016) and found significant year-to-year variability. Cryoconite hole communities on temperate glaciers are therefore not temporally stable.

Microfossil records from ice archives allow vegetation, fire and land-use activity reconstructions on broad spatial scales. Samples typically contain low microfossil concentrations. Therefore, large ice volumes are often needed for palynology. Hence, it is crucial to extract maximum microfossil numbers through appropriate physical-chemical treatments. We compare six methods covering the main water reduction procedures: evaporation, filtration and centrifugation with snow samples. Adding a known number of Lycopodium marker spores prior to sample treatment and a second marker (Eucalyptus) after laboratory processing allows a quantitative microfossil loss assessment during pollen extraction. We applied the best-performing method (average loss of 22%) to high-alpine firn cores from Colle Gnifetti glacier for validation with a natural archive containing extremely low microfossil concentrations. We conclude that samples processed with different microfossil extraction protocols may give different results for pollen concentrations, percentages and ratios between different pollen types, especially if vesiculate conifer pollen is an important pollen assemblage component. We recommend a new evaporation-based method which delivers the smallest and least variable losses among the tested approaches. Since microfossil losses are inevitable during laboratory procedure, adding markers prior to sample processing is mandatory to achieve reliable microfossil concentration and influx estimates.

In our comments, we re-evaluate Brugger and others (2018) Lycopodium/Eucalyptus double marker approach, based on the fact that previous evidence already demonstrated that the batch of Eucalyptus tablets used by Brugger and others (2018) is not suitable for quantitative comparisons as they are characterized by inconsistent pollen concentration. We present clear evidence that the Eucalyptus tablets do feature inaccurate pollen concentrations, and are therefore improper for all quantitative comparisons of microfossil extraction methods. Consequently, the results of the quantitative and qualitative assessment of different pollen extraction methods from ice samples compiled by Brugger and others (2018) are highly questionable due to the use of faulty marker tablets.

To understand the geological origins of minerals in cryoconite and the nutrients sources for microbes on glaciers, we analyzed the Sr–Nd isotopic ratios of the four mineral fractions in cryoconites including saline, carbonate, phosphate, silicate and the organic fraction obtained from Gulkana Glacier in Alaska. The isotopes in the silicate mineral fraction exhibited spatial variation within the glacier (87Sr/86Sr: 0.704533–0.709563, ε Nd (0): −16.0 to 0.5), which can be explained by the different mixing ratios of the two distinct sources: one of the sources is lateral and terminal moraines or soil, and the other is the medial moraine of the glacier. The minerals in the cryoconite at the lower sites in the glacier are likely derived from the former source, whereas those at the upper sites are from latter sources. The mineralogical and elemental compositions also support mixing of the silicate minerals from the two local sources. The Sr isotopic ratios of the organic fraction also showed spatial variation on the glacier in the middle sites – a trend similar to those of the phosphate fraction. The results suggest that the organic matter is mostly the byproducts of microbes using the phosphate minerals as a nutrient source. [ABSTRACT FROM AUTHOR]

Cryoconite holes are water-filled cylindrical holes formed on ablation ice surfaces and commonly observed on glaciers worldwide. Temporal changes of cryoconite holes characteristically <5 cm in diameter were monitored with a time-lapse interval camera over 15 d during the melting season on Qaanaaq Glacier in northwest Greenland. The holes drastically changed their dimensions and synchronously collapsed twice during the study period. When the holes collapsed, the coverage of cryoconite on the ice surface increased from 1.0 to 3.5% in the field of view of the camera, and then decreased again to 0.4% after the holes reformed. Comparison with meteorological data showed that the collapses occurred in cloudy and rainy or windy weather conditions, corresponding to low shortwave solar radiation (68–126 W m−2, 40–55% of the incoming flux). In contrast, holes developed in sunny conditions correspond to high solar radiation (186–278 W m−2, 63–88%). Results suggest that the dimensions of holes drastically changed depending on the weather conditions and that frequent cloudy, warm and windy conditions would cause a decay of holes and weathering crust, inducing an increase in the cryoconite coverage on the ice, consequently darkening the glacier surface. [ABSTRACT FROM AUTHOR]

Cryoconite holes are small depressions of the glacier surface filled with melting water and with a wind-blown debris on the bottom. These environments are considered hot spots of biodiversity and biological activities on glaciers and host communities dominated by bacteria. Most of the studies on cryoconite holes assume that their communities are stable. However, evidence of seasonal variation in cryoconite hole ecological communities exists. We investigated the variation of the bacterial communities of cryoconite holes of Forni Glacier (Central Italian Alps) during the melting seasons (July–September) 2013 and 2016, for which samples at three and five time-points, respectively were available. Bacterial communities were characterized by high-throughput Illumina sequencing of the hypervariable V5−V6 regions of 16S rRNA gene, while meteorological data were obtained by an automatic weather station. We found consistent trends in bacterial communities, which shifted from cyanobacteria-dominated communities in July to communities dominated by heterotrophic orders in late August and September. Temperature seems also to affect seasonal dynamics of communities. We also compared bacterial communities at the beginning of the melting season across 4 years (2012, 2013, 2015 and 2016) and found significant year-to-year variability. Cryoconite hole communities on temperate glaciers are therefore not temporally stable. [ABSTRACT FROM AUTHOR]

Microfossil records from ice archives allow vegetation, fire and land-use activity reconstructions on broad spatial scales. Samples typically contain low microfossil concentrations. Therefore, large ice volumes are often needed for palynology. Hence, it is crucial to extract maximum microfossil numbers through appropriate physical-chemical treatments. We compare six methods covering the main water reduction procedures: evaporation, filtration and centrifugation with snow samples. Adding a known number of Lycopodium marker spores prior to sample treatment and a second marker (Eucalyptus) after laboratory processing allows a quantitative microfossil loss assessment during pollen extraction. We applied the best-performing method (average loss of 22%) to high-alpine firn cores from Colle Gnifetti glacier for validation with a natural archive containing extremely low microfossil concentrations. We conclude that samples processed with different microfossil extraction protocols may give different results for pollen concentrations, percentages and ratios between different pollen types, especially if vesiculate conifer pollen is an important pollen assemblage component. We recommend a new evaporation-based method which delivers the smallest and least variable losses among the tested approaches. Since microfossil losses are inevitable during laboratory procedure, adding markers prior to sample processing is mandatory to achieve reliable microfossil concentration and influx estimates. [ABSTRACT FROM AUTHOR]

In our comments, we re-evaluate Brugger and others (2018) Lycopodium / Eucalyptus double marker approach, based on the fact that previous evidence already demonstrated that the batch of Eucalyptus tablets used by Brugger and others (2018) is not suitable for quantitative comparisons as they are characterized by inconsistent pollen concentration. We present clear evidence that the Eucalyptus tablets do feature inaccurate pollen concentrations, and are therefore improper for all quantitative comparisons of microfossil extraction methods. Consequently, the results of the quantitative and qualitative assessment of different pollen extraction methods from ice samples compiled by Brugger and others (2018) are highly questionable due to the use of faulty marker tablets. [ABSTRACT FROM AUTHOR]

Microorganisms were the earliest inhabitants on our planet that occupy nearly every environment, and play a major role in biogeochemical cycles. Despite their global importance, there remains a paucity of data on microbial responses to long-term environmental and climatic changes. Microorganisms are known to be immured in glacial ice, but no high-resolution temporal records of their density exist, owing in large part to the lack of appropriate clean methodology that allows for rapid analysis of samples over depth. We describe a clean and time efficient method that can produce a high-temporal resolution record of prokaryotic density archived in ice cores. The method combines acquisition of discrete samples using a continuous ice-core melting system coupled with flow cytometry (FCM) of DNA-stained samples. Specifically, we evaluate the performance of the FCM measurement technique in terms of specificity, precision, accuracy and minimum detection limits. Examples from the West Antarctic Ice Sheet Divide ice core are included to show the efficacy of the method. [ABSTRACT FROM AUTHOR]

Due to solute impurities and freezing-point depression in polycrystalline ice, a complicated and dynamic network of liquid water forms within the solid ice matrix at the boundaries between ice crystal grains. Impurity concentrations, temperature and pressure influence this network structure and impact physical, transport and rheological properties of ice. However, the nature of this internal network structure is not fully understood. Here we utilize nuclear magnetic resonance (NMR) measurements of diffusion and magnetic relaxation to study the geometry and interconnectivity of the liquid-filled network in laboratory ice, formed from a 7 g L-1 NaCl solution, and its evolution due to recrystallization processes. Additionally, we apply these NMR measurements to observe the impact on ice microstructure of an ice-binding protein (IBP) excreted by the V3519-10 organism (Flavobacteriaceae family) isolated from the Vostok ice core in Antarctica. Recrystallization inhibition was observed as a function of IBP concentration. This work demonstrates the utility of advanced NMR techniques for applications to ice microstructure and has broader implications for understanding geophysical properties of cryospheric systems. [ABSTRACT FROM AUTHOR]

Antarctic subglacial lakes are of great interest to the science community. These systems are considered to be in pristine condition, potentially harbouring an environment containing undisturbed sedimentary sequences and ecosystems adapted to cold oligotrophic environments in the absence of sunlight. Gaining access to subglacial lakes presents major technological challenges. To comply with conventions covering the exploration of pristine Antarctic environments, access should be conducted so the lake is not contaminated in any way. Consequently, all equipment to enter the lake must be sterile and the entrance should isolate the lake from the external environment. Currently, clean access to these environments is achieved using a hot-water drilling system. Differences between the hydraulic pressure head of the lake and the glacial surface result in a section of the borehole being air-filled. It is imperative that this section is disinfected prior to introducing any sampling equipment. This paper describes the design process involved in rapid-prototyping an ultraviolet (UV) disinfection reactor for achieving this goal. Considerations such as UV output, physical constraints, temperature management, and deployment procedures are assessed. We present a design that addresses these considerations. [ABSTRACT FROM AUTHOR]

Furthermore, the differences in pollen percentages between the centrifugation-based methods (FESTI, EICHLER) compared to the filtration- and evaporation-based methods indicates a clear variation in pollen composition (pollen percentages), which is independent from marker-based concentration estimates. Thus, as Festi and others ([10]) correctly repeat, the method differences have important implications for the interpretation of pollen records with a preferential loss of vesiculate pollen when using centrifugation-based methods, which is one of the fundamental conclusions in our method comparison (Brugger and others, [3]). A comparison of pollen extraction methods confirms dense-media separation as a reliable method of pollen preparation. [Extracted from the article]