Search

The association between microRNA (miRNA) and various diseases has been established; miRNAs have the potential to be biomarkers for these diseases. Nevertheless, the challenge of correctly quantifying an miRNA arises from its low abundance and a high degree of family homology. Therefore, in the present study, we devised a chemiluminescence (CL) detection method for miRNAs, known as the hybridization chain reaction (HCR)-CL, utilizing the enzyme-free signal amplification technology of HCR. The proposed methodology obviates the need for temperature conversion and offers a straightforward procedure owing to the absence of enzymatic participation, and the lumino-H2O2-mediated CL reaction occurs at a high rate. The technique successfully detected 2.5 amol of the target analyte and 50 amol of miR-146b in a 1% concentration of human serum. In summary, the method developed in this study is characterized by its ease of operation, cost-effectiveness, remarkable analytical prowess, and ability to detect miRNA without the need for total RNA extraction from serum samples. This method is expected to be widely used for biological sample testing in clinical settings. [ABSTRACT FROM AUTHOR]

Accurate signal amplification in living cells is highly important in biomedical research and medical diagnostics. Benefiting from its enzyme-free, efficient isothermal signal amplification ability, hybridization chain reaction (HCR) plays an important role in intracellular signal amplification; however, HCR fails the accurate signal amplification in the situation when the properties of some biological targets and analogues are too similar. Particularly, their signal amplification accuracy for mature miRNAs is unsatisfactory due to the signal interference of precursor microRNAs (abbreviated as pre-miRNAs), which also contain the sequence of mature miRNAs. Herein, we develop the first example of size-selective hybridization chain reaction probe for accurate signal amplification, which achieved accurate and sensitive biosensing of mature miRNAs in living cancer cells. Our probe, termed as qTcage, consists of a DNA nanocage for size-selective responsive to mature miRNAs, as well as a quadrivalent tetrahedral DNA structure for HCR signal amplification. Benefiting from the size-selectivity of DNA nanocage, shorter mature miRNAs (19–23 nt) rather than longer pre-miRNAs (60–70 nt) could enter the cavity to release triggers strand, which activates HCR reaction for fluorescence signal recovery. The probe efficiently reduces signal interference of pre-miRNAs and improves the imaging sensitivity for intracellular mature miRNAs, which was successfully applied for mature miRNAs imaging during drug treatment. Overall, this strategy provides the hybridization chain reaction with the feature of size-selective ability, which holds promise for further accurate signal amplification in biological processes study and clinical diagnostics. [ABSTRACT FROM AUTHOR]

Live‐cell imaging of RNA in specific subcellular compartments is essential for elucidating the rich repertoire of cellular functions, but it has been limited by a lack of simple, precisely controlled methods. Here such an approach is presented via the combination of hybridization chain reaction and spatially restricted enzymatic activation with organelle‐targeted delivery. The system can localize engineered DNA hairpins in the mitochondria, where target RNA‐initiated chain reaction of hybridization events is selectively activated by a specific enzyme, enabling amplified RNA imaging with high precision. It is demonstrated that the approach is compatible with live cell visualization and enables the regulatable imaging of microRNA in mitochondria. Since in situ activation of the signal amplification with enzyme eliminates the need for genetically encoded protein overexpression, it is envisioned that this simple platform will be broadly applicable for precise RNA imaging with subcellular resolution in a variety of biological processes. [ABSTRACT FROM AUTHOR]

In the field of neonatal infections nursing, methicillin-resistant Staphylococcus aureus (MRSA) is a major bacterial pathogen. Here, we present a portable biosensor for MRSA detection that is both highly sensitive and portable, owing to its implementation on the personal glucose meter (PGM) platform. The H probe was fixed on the magnetic bead for mecA gene analysis. A blunt 3′ terminus appeared in the MBs-H probe when the mecA gene was present. Exonuclease-III (Exo-III) recognized the blunt terminus and cleaved it, freeing the mecA gene and so facilitating target recycling. In the meantime, the remaining H probe-initiated hybridization chain reaction (HCR) led to the desired signal amplification. Portable quantitative detection of mecA gene is possible because PGM can read the quantity of invertase tagged on HCR product. After optimizing several experimental parameters, such as the concentration of Exo-III and incubation time, the constructed sensor is extremely sensitive, with a detection limit of 2 CFU/mL. The results from this sensitive PGM-based sensor are in agreement with those obtained from plate counting methods, suggesting that it can be used to accurately assess the MRSA content in artificial clinical samples. In addition, the PGM sensor can significantly cut down on time spent compared to plate counting techniques. The manufactured sensor provides a promising option for accurate identification of pathogenic bacteria. [ABSTRACT FROM AUTHOR]

In recent years, microRNAs have been used as cancer markers in clinical testing. In this study, an electrochemical biosensor was developed based on nanomaterials and the hybridization chain reaction (HCR) for highly sensitive and selective detection of the target miR-378 using K3Fe(CN)6/K4Fe(CN)6 as a redox indicator. MiR-378 is located on human chromosome 5q32 and serves as an important gene regulatory locus. Recent studies have found that aberrant expression of miR-378 is associated with cervical cancer, breast cancer, lung cancer, and other diseases. HCR is a simple and efficient isothermal amplification technique that does not require enzyme mediation and can be performed at room temperature. Evaluations of the specificity, stability, and sensitivity of the developed sensor revealed its ability to rapidly and specifically detect miR-378 in two hours with a detection limit as low as 100 cells in a volume of 400 µL, thereby indicating that this device could provide a novel approach for clinical diagnosis. [ABSTRACT FROM AUTHOR]

The sensitive detection of cancer biomarkers is crucial for early accurate diagnostics and therapy of cancer patients. Carcinoembryonic antigen (CEA) is a tumor‐associated antigen derived from colon cancer and embryonic tissues. In this study, we have developed a label‐free fluorescence biosensing platform for the quantification of CEA with the "turn‐on" signal output. This platform employs a label‐free strategy that incorporates an aptamer‐modified gold nanoparticle (Apt@AuNP) probe for the recognition of CEA, in combination with hybridization chain reaction (HCR) amplification. In the presence of target CEA, Apt@AuNPs selectively capture CEA, resulting in a reduction of subsequent complementary chains (CP) binding on Apt@AuNPs. The remaining CP, acting as the initiator sequence for HCR, triggers the HCR, leading to the formation of abundant G‐quadruplex structures. By employing Thioflavin T (ThT) for the formation of G‐quadruplex/ThT complexes, the biosensor exhibits a significant enhancement of the fluorescence signal. Under optimized conditions, the biosensor platform demonstrates a limit of detection of 0.03 nM and a linear range from 0.1 to 2.5 nM. Additionally, the specificity investigation reveals the high selectivity of this fluorescent biosensor. Finally, the performance of this method has been validated by successfully detecting CEA in real‐life samples, highlighting its potential for clinical applications. [ABSTRACT FROM AUTHOR]

Circulating microRNAs (miRNAs) play a pivotal role in the occurrence and development of acute myocardial infarction (AMI), and precise detection of them holds significant clinical implications. The development of luminol-based luminophores in the field of electrochemiluminescence (ECL) for miRNA detection has been significant, while their effectiveness is hindered by the instability of co-reactant hydrogen peroxide (H2O2). In this work, an iron single-atom catalyst (Fe-PNC) was employed for catalyzing the luminol-O2 ECL system to achieve ultra-sensitive detection of myocardial miRNA. Target miRNA triggers a hybridization chain reaction (HCR), resulting in the generation of a DNA product featuring multiple sticky ends that facilitate the attachment of Fe-PNC probes to the electrode surface. The Fe-PNC catalyst exhibits high promise and efficiency for the oxygen reduction reaction (ORR) in electrochemical energy conversion systems. The resulting ECL biosensor allowed ultrasensitive detection of myocardial miRNA with a low detection limit of 0.42 fM and a wide linear range from 1 fM to 1.0 nM. Additionally, it demonstrates exceptional performance when evaluated using serum samples collected from patients with AMI. This work expands the application of single-atom catalysis in ECL sensing and introduces novel perspectives for utilizing ECL in disease diagnosis. [ABSTRACT FROM AUTHOR]

Tandem repeat (TR) proteins are abundant in nature and show diverse biochemical and mechanical properties. However, these proteins can be difficult to synthesize in a precise way because of their repetitive nature. Using a supramolecular polymerization scheme known as hybridization chain reaction, we show how to generate the DNA sequences encoding such TR proteins. The polymerization mechanism allows for identical "monomers" to selectively create TR proteins of different molecular weight. We demonstrate this strategy with examples from elastin‐like polypeptides (ELPs) and mussel foot proteins (mfps). Moreover, the scheme can be adapted to create protein libraries through the use of multiple DNA hairpin "monomers." [ABSTRACT FROM AUTHOR]

Detecting RNA molecules within their natural environment inside intact arthropods has long been challenging, particularly in small organisms covered by a tanned and pigmented cuticle. Here, we have developed a methodology that enables high‐resolution analysis of the spatial distribution of transcripts of interest without having to dissect tiny organs or tissues, thereby preserving their integrity. We have combined an in situ amplification approach based on hybridization chain reaction, which enhances the signal‐to‐noise ratio, and a clearing approach that allows the visualization of inner organs beneath the cuticle. We have implemented this methodology for the first time in Hemiptera, mapping two salivary aphid (Acyrthosiphon pisum) transcripts, the effector c002 and the salivary sheath protein SHP. With a multiplex approach, we could simultaneously detect different mRNAs in mounted pea aphid head‐thorax samples and show that they were distributed in distinct secretory cells of salivary glands. Research Highlights: Combining hybridisation chain reaction and clearing allows the detection of transcripts in intact aphids heads.The transcripts of the two salivary proteins c002 and SHP are compartmentalized in distinct secretory cells of the principal glands. [ABSTRACT FROM AUTHOR]

An ultrasensitive electrochemical biosensor to detect trace Hg2+ in environmental samples was developed utilizing nanogold-decorated magnetic reduced graphene oxide (MrGO-AuNPs), exonuclease III-assisted target cycle (Exo III-ATC) and hybridization chain reaction (HCR) synergistic triple signal amplification. The MrGO-AuNPs is a superior carrier for capture DNA (cDNA) and acts as magnetic media for automatic separation and adsorption. This innovative utilization of the magnetism and improved sensing efficiency obviates the need for direct modification and repeated polishing of the working electrode. Additionally, the three DNA hairpins (cDNA, methylene blue (MB) labeled HP1 and HP2) further contribute to biosensor specificity and selectivity. When cDNA captures Hg2+, it activates Exo III-ATC due to the formation of a sticky end in the cDNA stem via thymine-Hg2+-thymidine (T-Hg2+-T), this leads to the hydrolysis of self-folded cDNA by Exo III-ATC to form "key" DNA (kDNA). The kDNA subsequently initiates HCR, resulting in massive super-sandwich structures (kDNA-[HP1/HP2]n carrying signaling molecules on MrGO-AuNPs, and this overall structure serves as a signal probe (SP). Leveraging magnetic adsorption, the SP was automatically adsorbed onto the magneto-glass carbon electrode (MGCE), generating an amplified signal. This biosensor's detection limit (LOD) was 3.14 pmol/L, far below the limit of 10 nmol/L for mercury in drinking water set by the US EPA. The biosensor also showed excellent selectivity when challenged by interfering ions, and the results of its application in actual samples indicate that it has good potential for practical applications in environmental monitoring. [ABSTRACT FROM AUTHOR]

Multiplex ligation-dependent probe amplification (MLPA) is a high-throughput detection technology with superior specificity and sensitivity, which combines ligation-dependent probe hybridization and PCR amplification. However, the whole process requires repeated temperature change, and the detection results need high resolution agarose electrophoresis or capillary electrophoresis, which limits its application. In viewing of its advantages, an isothermal reaction process based on that combined Hybridization chain reaction (HCR) and hydrogel technology is developed, in order to achieve visual output of detection results without relying on any large instruments and equipment. The edible mushroom is taken as the detection target, and the LP probes were designed according to its reported endogenous reference gene. Through optimizing the reaction conditions, only the samples contained target component, the result showed irregular hydrogel. This visual detection system had good specificity, which detection limit was as low as 0.32 ng/μL. The development of this method provides a new strategy for species identification and adulteration detection of edible mushroom, even for more DNA target detection.

Monitoring neuronal activity at single-cell resolution in freely moving Drosophila engaged in social behaviors is challenging because of their small size and lack of transparency. Extant methods, such as Flyception, are highly invasive. Whole-brain calcium imaging in head-fixed, walking flies is feasible but the animals cannot perform the consummatory phases of social behaviors like aggression or mating under these conditions. This has left open the fundamental question of whether neurons identified as functionally important for such behaviors using loss- or gain-of-function screens are actually active during the natural performance of such behaviors, and if so during which phase(s). Here, we perform brain-wide mapping of active cells expressing the Immediate Early Gene hr38 using a high-sensitivity/low background fluorescence in situ hybridization (FISH) amplification method called HCR-3.0. Using double-labeling for hr38 mRNA and for GFP, we describe the activity of several classes of aggression-promoting neurons during courtship and aggression, including P1a cells, an intensively studied population of male-specific interneurons. Using HI-FISH in combination with optogenetic activation of aggression-promoting neurons (opto-HI-FISH), we identify candidate downstream functional targets of these cells in a brain-wide, unbiased manner. Finally, we compare the activity of P1a neurons during sequential performance of courtship and aggression, using intronic vs. exonic hr38 probes to differentiate newly synthesized nuclear transcripts from cytoplasmic transcripts synthesized at an earlier time. These data provide evidence suggesting that different subsets of P1a neurons may be active during courtship vs. aggression. HI-FISH and associated methods may help to fill an important lacuna in the armamentarium of tools for neural circuit analysis in Drosophila.

A fluorogenic aptamer (FA)-based hybridization chain reaction (HCR) could provide a sensitive and label-free signal amplification method for imaging molecules in living cells. However, existing FA-HCR methods usually face some problems, such as a complicated design and significant background leakage, which greatly limit their application. Herein, we developed an FA-centered HCR (FAC-HCR) method based on a remote toehold-mediated strand displacement reaction. Compared to traditional HCRs mediated by four hairpin probes (HPs) and two HPs, the FAC-HCR displayed significantly decreased background leakage and improved sensitivity. Furthermore, the FAC-HCR was used to test a non-nucleic acid target, apurinic/apyrimidinic endonuclease 1 (APE1), an important BER-involved endonuclease. The fluorescence analysis results confirmed that FAC-HCR can reach a detection limit of 0.1174 U/mL. By using the two HPs for FAC-HCR with polyetherimide-based nanoparticles, the activity of APE1 in living cells can be imaged. In summary, this study could provide a new idea to design an FA-based HCR and improve the performance of HCRs in live cell imaging. [ABSTRACT FROM AUTHOR]

The ultrasensitive detection of hepatitis C virus (HCV) nucleic acid is crucial for the early diagnosis of hepatitis C. In this study, by combining Ag@Au core/shell nanoparticle (Ag@AuNP)-based surface-enhanced Raman scattering (SERS) tag with hybridization chain reaction (HCR), a novel SERS-sensing method was developed for the ultrasensitive detection of HCV nucleic acid. This SERS-sensing system comprised two different SERS tags, which were constructed by modifying Ag@AuNP with a Raman reporter molecule of 4-ethynylbezaldehyde, two different hairpin-structured HCR sequences (H1 or H2), and a detection plate prepared by immobilizing a capture DNA sequence onto the Ag@AuNP layer surface of the detection wells. When the target nucleic acid was present, the two SERS tags were captured on the surface of the Ag@AuNP-coated detection well to generate many "hot spots" through HCR, forming a strong SERS signal and realizing the ultrasensitive detection of the target HCV nucleic acid. The limit of detection of the SERS-sensing method for HCV nucleic acid was 0.47 fM, and the linear range was from 1 to 105 fM. [ABSTRACT FROM AUTHOR]

Conventional spherical nucleic acid enzymes (SNAzymes), made with gold nanoparticle (AuNPs) cores and DNA shells, are widely applied in bioanalysis owing to their excellent physicochemical properties. Albeit important, the crowded catalytic units (such as G-quadruplex, G4) on the limited AuNPs surface inevitably influence their catalytic activities. Herin, a hybridization chain reaction (HCR) is employed as a means to expand the quantity and spaces of G4 enzymes for their catalytic ability enhancement. Through systematic investigations, we found that when an incomplete G4 sequence was linked at the sticky ends of the hairpins with split modes (3:1 and 2:2), this would significantly decrease the HCR hybridization capability due to increased steric hindrance. In contrast, the HCR hybridization capability was remarkably enhanced after the complete G4 sequence was directly modified at the non-sticky end of the hairpins, ascribed to the steric hindrance avoided. Accordingly, the improved SNAzymes using HCR were applied for the determination of AFB1 in food samples as a proof-of-concept, which exhibited outstanding performance (detection limit, 0.08 ng/mL). Importantly, our strategy provided a new insight for the catalytic activity improvement in SNAzymes using G4 as a signaling molecule. [ABSTRACT FROM AUTHOR]

ABSTRACT Microbial gene expression measurements derived from infected organs are invaluable to understand pathogenesis. However, current methods are limited to “bulk” analyses that neglect microbial cell heterogeneity and the lesion's spatial architecture. Here, we report the use of hybridization chain reaction RNA fluorescence in situ hybridization (HCR RNA-FISH) to visualize and quantify Candida albicans transcripts at single-cell resolution in tongues of infected mice. The method is compatible with fixed-frozen and formalin-fixed paraffin-embedded tissues. We document cell-to-cell variation and intriguing spatiotemporal expression patterns for C. albicans mRNAs that encode products implicated in oral candidiasis. The approach provides a spatial dimension to gene expression analyses of host-Candida interactions.IMPORTANCECandida albicans is a fungal pathobiont inhabiting multiple mucosal surfaces of the human body. Immunosuppression, antibiotic-induced microbial dysbiosis, or implanted medical devices can impair mucosal integrity enabling C. albicans to overgrow and disseminate, causing either mucosal diseases such as oropharyngeal candidiasis or life-threatening systemic infections. Profiling fungal genes that are expressed in the infected mucosa or in any other infected organ is paramount to understand pathogenesis. Ideally, these transcript profiling measurements should reveal the expression of any gene at the single-cell level. The resolution typically achieved with current approaches, however, limits most gene expression measurements to cell population averages. The approach described in this report provides a means to dissect fungal gene expression in infected tissues at single-cell resolution.

Although immobilization-free and label-free electrochemical DNA (E-DNA) biosensors have engaged tremendous interest due to their superior properties, such as easy operation, time-saving and cost-saving, most of them are fabricated in homogeneous modes and usually produce high background current. In the present work, we proposed a new immobilization-free and label-free heterogeneous E-DNA assay based on a dual-blocker-aided multibranched hybridization chain reaction (HCR) for one-pot nucleic acid detection with zero background. The target nucleic acid triggers the HCR involving cascaded hybridization between two metastable hairpins, resulting in the generation of HCR products with multibranched arms, which can be captured onto the electrode via π-π stacking interactions between multibranched arms and reduced graphene oxide (rGO). Prior to the incubation process with an electrode, two blockers are designed to prohibit the nonspecific absorption of unreacted hairpin probes. Thus, an immobilization-free and label-free heterogeneous electrochemical assay for one-pot nucleic acid detection with zero background is readily realized. This strategy also presents additional merits of simplicity and cheap cost, since probe immobilization, signal tag labeling, and multiple incubation processes are avoided. Therefore, the as-proposed effective and versatile biosensor has great potential to be applied in nucleic acid-related practical biosensing.

The association between microRNA (miRNA) and various diseases has been established; miRNAs have the potential to be biomarkers for these diseases. Nevertheless, the challenge of correctly quantifying an miRNA arises from its low abundance and a high degree of family homology. Therefore, in the present study, we devised a chemiluminescence (CL) detection method for miRNAs, known as the hybridization chain reaction (HCR)-CL, utilizing the enzyme-free signal amplification technology of HCR. The proposed methodology obviates the need for temperature conversion and offers a straightforward procedure owing to the absence of enzymatic participation, and the lumino-H2O2-mediated CL reaction occurs at a high rate. The technique successfully detected 2.5 amol of the target analyte and 50 amol of miR-146b in a 1% concentration of human serum. In summary, the method developed in this study is characterized by its ease of operation, cost-effectiveness, remarkable analytical prowess, and ability to detect miRNA without the need for total RNA extraction from serum samples. This method is expected to be widely used for biological sample testing in clinical settings.

Endocrine-disrupting chemicals (EDCs) represent a global threat to human health and the environment. In vertebrates, lipophilic EDCs primarily act by mimicking endogenous hormones, thus interfering with the transcriptional activity of nuclear receptors (NRs). The demonstration of the direct translation of these mechanisms into perturbation of NR-mediated physiological functions in invertebrates, however, has rarely proven successful, as the modes of action of EDCs in vertebrates and invertebrates seem to be distinct. In the present work, we investigated the members of the NR superfamily in a bivalve mollusk, the Mediterranean mussel Mytilus galloprovincialis. In addition to annotating the M. galloprovincialis NR complement, we assessed the potential developmental functions and susceptibility to EDC challenge during early development by gene expression analyses. Our results indicate that a majority of mussel NRs are dynamically expressed during early development, including receptors characterized by a potential susceptibility to EDCs. This study thus indicates that NRs are major regulators of early mussel development and that NR-mediated endocrine disruption in the mussel could be occurring at a larger scale and at earlier stages of the life cycle than previously anticipated. Altogether, these findings will have significant repercussions for our understanding of the stability of natural mussel populations. This article is part of the theme issue 'Endocrine responses to environmental variation: conceptual approaches and recent developments'. [ABSTRACT FROM AUTHOR]

A model organism in developmental biology is defined by its experimental amenability and by resources created for the model system by the scientific community. For the most powerful invertebrate models, the combination of both has already yielded a thorough understanding of developmental processes. However, the number of developmental model systems is still limited, and their phylogenetic distribution heavily biased. Members of one of the largest animal lineages, the Spiralia, for example, have long been neglected. In order to remedy this shortcoming, we have produced a detailed developmental transcriptome for the bivalve mollusk Mytilus galloprovincialis, and have expanded the list of experimental protocols available for this species. Our high-quality transcriptome allowed us to identify transcriptomic signatures of developmental progression and to perform a first comparison with another bivalve mollusk: the Pacific oyster Crassostrea gigas. To allow co-labelling studies, we optimized and combined protocols for immunohistochemistry and hybridization chain reaction to create high-resolution co-expression maps of developmental genes. The resources and protocols described here represent an enormous boost for the establishment of Mytilus galloprovincialis as an alternative model system in developmental biology. [ABSTRACT FROM AUTHOR]

MicroRNA (miRNA) is the marker for early diagnosis of cancer and plays a key role in physiological and pathological processes, therefore real-time and accurate monitoring of miRNA is of great significance. Currently, signal amplification/magnification strategies for miRNA assay are mostly dependent on the involvement of coenzymes. In this paper, a highly sensitive and specific miRNA detection method based on gold nanoparticle (AuNPs) aggregation and hybridization chain reaction (HCR) enzyme-free amplification is established. An assisted hairpin probe (HP) and two universal hairpin probes (H1/H2) are designed. Both of them are single-stranded DNA (ssDNA) with sticky ends, which could stabilize AuNPs in aqueous solution and effectively prevent salt-induced aggregation. The target miRNA hybridizes with the HP loop region, initiating HCR to trigger the formation of double-stranded DNA (dsDNA) polymers. The dsDNA polymer has no sticky ends and no ability to stabilize gold nanoparticles, resulting in salt-induced aggregation of AuNPs, and the change of gold-colloidal solution from wine red to blue. Thus, miRNA can be detected by spectrophotometry. This strategy does not rely on enzymatic reactions, separation processes, and chemical modifications, and operation is simple. By designing the HP loop sequence, the detection of different targets can be realized and show good versatility. [ABSTRACT FROM AUTHOR]

A novel and highly sensitive colorimetric DNA sensor for determination of miRNA-155 at attomolar levelsis presented that combines the peroxidase-like activity of copper nanoparticles (CuNPs) with the hybridization chain reaction (HCR). The utilization of CuNPs offers advantages such as strong interaction with double-stranded DNA, excellent molecular recognition, and mimic catalytic activity. Herein, a capture probe DNA (P1) was immobilized on carboxylated magnetic beads (MBs), allowing for amplified immobilization due to the 3D surface. Subsequently, the presence of the target microRNA-155 led to the formation of a sandwich structure (P2/microRNA-155/P1/MBs) when P2 was introduced to the modified P1/MBs. The HCR reaction was then triggered by adding H1 and H2 to create a super sandwich (H1/H2)n. Following this, Cu2+ ions were attracted to the negatively charged phosphate groups of the (H1/H2)n and reduced by ascorbic acid, resulting in the formation of CuNPs, which were embedded into the grooves of the (H1/H2)n. The peroxidase-like activity of CuNPs catalyzed the oxidation reaction of 3,3',5,5'-Tetramethylbenzidine (TMB), resulting in a distinct blue color measured at 630 nm. Under optimal conditions, the colorimetric biosensor exhibited a linear response to microRNA–155 concentrations ranging from 80 to 500 aM, with a detection limit of 22 aM, and discriminate against other microRNAs. It was also successfully applied to the determination of microRNA–155 levels in spiked human serum. [ABSTRACT FROM AUTHOR]

Abstract Background In the past few years, there has been an explosion in single-cell transcriptomics datasets, yet in vivo confirmation of these datasets is hampered in plants due to lack of robust validation methods. Likewise, modeling of plant development is hampered by paucity of spatial gene expression data. RNA fluorescence in situ hybridization (FISH) enables investigation of gene expression in the context of tissue type. Despite development of FISH methods for plants, easy and reliable whole mount FISH protocols have not yet been reported. Results We adapt a 3-day whole mount RNA-FISH method for plant species based on a combination of prior protocols that employs hybridization chain reaction (HCR), which amplifies the probe signal in an antibody-free manner. Our whole mount HCR RNA-FISH method shows expected spatial signals with low background for gene transcripts with known spatial expression patterns in Arabidopsis inflorescences and monocot roots. It allows simultaneous detection of three transcripts in 3D. We also show that HCR RNA-FISH can be combined with endogenous fluorescent protein detection and with our improved immunohistochemistry (IHC) protocol. Conclusions The whole mount HCR RNA-FISH and IHC methods allow easy investigation of 3D spatial gene expression patterns in entire plant tissues.

Background: In the past few years, there has been an explosion in single-cell transcriptomics datasets, yet in vivo confirmation of these datasets is hampered in plants due to lack of robust validation methods. Likewise, modeling of plant development is hampered by paucity of spatial gene expression data. RNA fluorescence in situ hybridization (FISH) enables investigation of gene expression in the context of tissue type. Despite development of FISH methods for plants, easy and reliable whole mount FISH protocols have not yet been reported. Results: We adapt a 3-day whole mount RNA-FISH method for plant species based on a combination of prior protocols that employs hybridization chain reaction (HCR), which amplifies the probe signal in an antibody-free manner. Our whole mount HCR RNA-FISH method shows expected spatial signals with low background for gene transcripts with known spatial expression patterns in Arabidopsis inflorescences and monocot roots. It allows simultaneous detection of three transcripts in 3D. We also show that HCR RNA-FISH can be combined with endogenous fluorescent protein detection and with our improved immunohistochemistry (IHC) protocol. Conclusions: The whole mount HCR RNA-FISH and IHC methods allow easy investigation of 3D spatial gene expression patterns in entire plant tissues. [ABSTRACT FROM AUTHOR]

Today, with the globalization of the food trade progressing, food safety continues to warrant widespread attention. Foodborne diseases caused by contaminated food, including foodborne pathogens, seriously threaten public health and the economy. This has led to the development of more sensitive and accurate methods for detecting pathogenic bacteria. Many signal amplification techniques have been used to improve the sensitivity of foodborne pathogen detection. Among them, hybridization chain reaction (HCR), an isothermal nucleic acid hybridization signal amplification technique, has received increasing attention due to its enzyme-free and isothermal characteristics, and pathogenic bacteria detection methods using HCR for signal amplification have experienced rapid development in the last five years. In this review, we first describe the development of detection technologies for food contaminants represented by pathogens and introduce the fundamental principles, classifications, and characteristics of HCR. Furthermore, we highlight the application of various biosensors based on HCR nucleic acid amplification technology in detecting foodborne pathogens. Lastly, we summarize and offer insights into the prospects of HCR technology and its application in pathogen detection. [ABSTRACT FROM AUTHOR]

Abnormally expressed miRNAs have been employed as crucial indicators for the diagnosis and prognosis of disease. It is essential to develop quick, affordable, accurate, and multiplexed methods for miRNA detection. In this study, polyethylene glycol (PEG) hydrogel microparticles were used as solid-phase carriers for the hybridization chain reaction (HCR) in combination with cation-exchange fluorescence amplification, thus enabling the development of a new method for miRNA determination. The assay was sensitive with the detection limit for miRNA let7a equal to 46 pM. The assay was specific, the base-mismatched sequences of miRNA let7a were distinguished, and the serum matrix did not cause any interference. Moreover, by integration with a microfluidic chip, the throughput was significantly enhanced and the process was noticeably simplified. With further development, the developed method may be suitable for practical clinical analysis. [ABSTRACT FROM AUTHOR]

The great selectivity and trans-cleavage activity of clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a had been coupled with high amplification efficiency of hybridization chain reaction (HCR) and magnetic-assisted enrichment, high sensitivity of electrochemiluminescence (ECL) detection to develop an ultra-sensitive biosensor for microRNA-21 (miRNA-21). The CRISPR/Cas13a was used to recognize target RNA with high specificity and performed the trans-cleavage activity. An initiation strand was generated to bind to the probe on the surface of nanomagnetic beads and then trigged HCR to produce long double-strand DNAs (dsDNAs) to realize signal amplification. Ru(phen)32+ can be inserted in the groove of the dsDNAs and acts as the ECL indicator, which can be separated through magnetic enrichment and allowed the platform to reduce the signal background. Under the optimized conditions, there is a good linear correlation between the ECL intensity and the logarithm of miRNA-21 concentration in the range 1 fM–10 nM; the limit of detection (LOD) was 0.53 fM. The proposed system was applied to detect miRNA-21 from the urine of acute kidney injury (AKI) patients with good results. [ABSTRACT FROM AUTHOR]

A fluorogenic aptamer (FA)-based hybridization chain reaction (HCR) could provide a sensitive and label-free signal amplification method for imaging molecules in living cells. However, existing FA-HCR methods usually face some problems, such as a complicated design and significant background leakage, which greatly limit their application. Herein, we developed an FA-centered HCR (FAC-HCR) method based on a remote toehold-mediated strand displacement reaction. Compared to traditional HCRs mediated by four hairpin probes (HPs) and two HPs, the FAC-HCR displayed significantly decreased background leakage and improved sensitivity. Furthermore, the FAC-HCR was used to test a non-nucleic acid target, apurinic/apyrimidinic endonuclease 1 (APE1), an important BER-involved endonuclease. The fluorescence analysis results confirmed that FAC-HCR can reach a detection limit of 0.1174 U/mL. By using the two HPs for FAC-HCR with polyetherimide-based nanoparticles, the activity of APE1 in living cells can be imaged. In summary, this study could provide a new idea to design an FA-based HCR and improve the performance of HCRs in live cell imaging.

Conventional spherical nucleic acid enzymes (SNAzymes), made with gold nanoparticle (AuNPs) cores and DNA shells, are widely applied in bioanalysis owing to their excellent physicochemical properties. Albeit important, the crowded catalytic units (such as G-quadruplex, G4) on the limited AuNPs surface inevitably influence their catalytic activities. Herin, a hybridization chain reaction (HCR) is employed as a means to expand the quantity and spaces of G4 enzymes for their catalytic ability enhancement. Through systematic investigations, we found that when an incomplete G4 sequence was linked at the sticky ends of the hairpins with split modes (3:1 and 2:2), this would significantly decrease the HCR hybridization capability due to increased steric hindrance. In contrast, the HCR hybridization capability was remarkably enhanced after the complete G4 sequence was directly modified at the non-sticky end of the hairpins, ascribed to the steric hindrance avoided. Accordingly, the improved SNAzymes using HCR were applied for the determination of AFB1 in food samples as a proof-of-concept, which exhibited outstanding performance (detection limit, 0.08 ng/mL). Importantly, our strategy provided a new insight for the catalytic activity improvement in SNAzymes using G4 as a signaling molecule.

Hybridization Chain Reaction (HCR) is a technique to generate a linear polymerization of oligonucleotide hairpins, used in multiple molecular biology methods. The HCR reaction is dependent on every hairpin being metastable in the absence of a triggering oligonucleotide and that every hairpin can continue the polymerization, which puts a strong demand on oligonucleotide quality. We show how further purification can greatly increase polymerization potential. It was found that a single extra PAGE-purification could greatly enhance hairpin polymerization both in solution and in situ. Purification using a ligation-based method further improved polymerization, yielding in situ immunoHCR stains at least 3.4-times stronger than a non-purified control. This demonstrates the importance of not only good sequence design of the oligonucleotide hairpins, but also the demand for high quality oligonucleotides to accomplish a potent and specific HCR. • Hybridization Chain Reaction (HCR) is highly sensitive to oligonucleotide quality. • Polymerization potential of HCR varies over production batches. • With purification, polymerization in HCR can be improved. • Purification increases stain strength several fold in in situ applications. [ABSTRACT FROM AUTHOR]

A dual-targeting nanobiosensor has been developed for the simultaneous detection of AMELX and AMELY genes based on the different fluorescence signals emitted from gold and silver nanoclusters, AuNCs and AgNCs respectively. In our design, both catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR) have been used as isothermal, enzyme-free and simple methods for signal's amplification. The working principle is based on the initiation of a cascade of CHA-HCR reactions when AMELX is present, in which AuNCs, synthesized on the third hairpin, are aggregated on the surface of the dsDNA product, performing the phenomenon of aggregation induced emission (AIE) and enhancing their fluorescence signal. On the other hand, the presence of the second target, AMELY, is responsible for the enhancement of the fluorescence signal corresponding to AgNCs by the same phenomenon, via hybridizing to the free end of the dsDNA formed and at the same time to the probe of silver nanoclusters fixing it closer to the surface of the dsDNA product. Such a unique design has the merits of being simple, inexpensive, specific and stable and presents rapid results. The detection limits of this assay for AMELX and AMELY are as low as 3.16 fM and 23.6 fM respectively. Moreover, this platform showed great performance in real samples. The design has great promise for the application of dual-targeting nanobiosensors to other biomarkers. [ABSTRACT FROM AUTHOR]

Tumor cell-derived exosomes are considered a potential source of cancer biomarkers. Here, we developed an electrochemical sensing platform for the rapid and simple detection of exosomes, using the CCRF-CEM exosome as a model. The platform utilizes cyclic nicking enzyme cleavage and a hybridization chain reaction (HCR) for dual-signal amplification. A hairpin aptamer probe (HAP) containing an aptamer was designed for the assay. The specific binding between the aptamer and PTK7, present on the exosome surface, causes a conformational change in the HAP. This facilitates hybridization between the HAP and the linker DNA, which subsequently triggers cyclic cleavage of the nicking endonuclease towards the linker DNA. Therefore, exosome detection is transformed into DNA detection. By combining this approach with HCR signal amplification, we achieved high-sensitivity electrochemical detection of CCRF-CEM exosomes, down to 1.1 × 104 particles/mL. Importantly, this assay effectively detected tumor exosomes in complex biological fluids, demonstrating the potential for clinical diagnosis. [ABSTRACT FROM AUTHOR]

The conventional hybridization chain reaction (HCR)-based electrochemical biosensors usually require the immobilization of probes on the electrode surface. This will limit the applications of biosensors due to the shortcomings of complex immobilization processes and low HCR efficiency. In this work, we proposed astrategy for the design of HCR-based electrochemical biosensors by integrating the advantages of homogeneous reaction and heterogeneous detection. Specifically, the targets triggered the autonomous cross-opening and hybridization oftwobiotin-labeled hairpin probes to form long-nicked dsDNA polymers. The HCR products with many biotin tags were then captured by a streptavidin-covered electrode, thus allowing for the attachment of streptavidin-conjugated signal reporters through streptavidin–biotin interactions. By employing DNA and microRNA-21 as the model targets and glucose oxidase as the signal reporter, the analytical performances of the HCR-based electrochemical biosensors were investigated. The detection limits of this method were found to be 0.6 fM and 1 fM for DNA and microRNA-21, respectively. The proposed strategy exhibited good reliability for target analysis in serum and cellular lysates. The strategy can be used to develop various HCR-based biosensors for a wide range of applications because sequence-specific oligonucleotides exhibit high binding affinity to a series of targets. In light of the high stability and commercial availability of streptavidin-modified materials, the strategy can be used for the design of different biosensors by changing the signal reporter and/or the sequence of hairpin probes. [ABSTRACT FROM AUTHOR]

Unlike plant and microbial cells having cell walls, the outermost layer of mammalian cell is a delicate, two‐layered structure of phospholipids with proteins embedded, which is susceptible to environmental changes. It is necessary to create an "armor" on cell surface to protect cell integrity. Here, we propose an Auto‐assembled Resilient bioMimetic calcified ORnaments (ARMOR) strategy driven by dual‐aptamer‐based hybridization chain reaction (HCR) and Ca2+ assisted calcification for selective cell protection. This co‐recognition design enhances the selectivity and leverages robust in situ signal amplification by HCR to improve the sensitivity. The calcified shell is cogenerated by crosslinking the alginate‐HCR product with Ca2+ ion. ARMOR has high efficiency for shielding cells from environmental assaults, which can be applied to circulating tumor cell (CTC) protection, isolation, and identification, maintaining the native state and intact genetic information for downstream analysis. [ABSTRACT FROM AUTHOR]

A ratiometric electrochemical aptasensor based on gold nanoparticles (AuNPs) functionalization and hybridization chain reaction (HCR) assisted signal amplification has been for the first time designed for the detection of streptomycin (STR). The double-stranded DNA (dsDNA) formed by the hybridization of ferrocene (Fc)-labeled STR aptamer (Apt) and capture probe (CP) is first immobilized on the gold electrode (GE) surface via Au–S reaction. The specific binding of the target and Apt results in numerous Fc detachment from the sensing interface. Then, the remaining single-stranded CP is combined with AuNPs modified with initiator DNA (iDNA) by auxiliary DNA (aDNA). Among them, the iDNA triggers HCR between two hairpin probes (H1/H2), thus capturing a large number of methylene blue (MB) electrochemical probe, which generates a strong electrochemical signal of MB and a weak electrochemical signal of Fc. Signals are collected by square wave voltammetry (the potential window ranging from -0.5 V to 0.6 V, vs. Ag/AgCl), and the oxidation peak currents at -0.200 V (MB) and 0.416 V (Fc) are recorded. The use of the ratiometric method has effectively improved the accuracy and reliability of the analysis. The successful application of AuNPs and HCR greatly improves the sensitivity of the sensor, and the detection limit is as low as 0.08 pM. It can sensitively determine STR in the range 0.1 pM to 10 nM. In addition, the designed aptasensor has been successfully applied to the detection of STR in milk and honey samples. [ABSTRACT FROM AUTHOR]

The irrational use of natural compounds in the treatment of diseases can lead to serious side effects, especially hepatoxicity, and its toxic effects are usually cumulative and imperceptible. Therefore, an accurate sensing platform is urgently needed to monitor the hepatotoxicity of natural compounds. Here, we deposited a thermo-responsive alginate-RGD/Pluronic hydrogel to construct an in vitro three-dimensional(3D) hepar-platform, and a thorough validation was adopted to evaluate the bioprinted hepatic constructs. The engineered hepar-platform was then employed to access its biological response toward Emodin (EM) and Triptolide (TP), two typical hepatotoxic natural compounds. Subsequently, we integrated it with a robust fluorescent sensor based on hybridization chain reaction amplification strategy (HCR) to monitor the early hepatotoxic biomarker - glutathione-S-transferase-alpha (GST-α) secreted by this 3D constructs. Our study was the first attempt to construct an accurate hepar-on-a-sensor platform that could effectively detect GST-α for monitoring the hepatoxic effects of natural compounds. The limit of detection of the platform was 0.3 ng ml−1 and the accuracy of this platform was verified by enzyme linked immunosorbent assay. Furthermore, the variation of GST-α induced by EM and TP was consistent with hepatotoxicity studies, thus providing an important application value for evaluating the hepatotoxicity of natural compounds. 1. We deposited a thermo-responsive alginate-RGD/Pluronic hydrogel to construct an in vitro three-dimensional(3D) hepar-platform, and elucidated the essential reasons why hybrid bioinks more suitable for 3D extrusion from biomaterials itself. Also, a thorough validation associated with a series of important proteins and genes involved in liver cell metabolism was adopted to evaluate the bioprinted hepatic constructs accurately 2. Glutathione-S-transferase-alpha is a soluble trace biomarker for acute hepatotoxic injury, the hepatotoxic effects of natural compounds on the secretion of GST-α has not been reported to date. We integrated our 3D hepar-platform with recognition molecules-aptamers and HCR amplification strategy to monitor the variation of GST-α, aiming at developing a robust and stable fluorescent biosensing platform to monitor the hepatoxicity of natural compounds [Display omitted] [ABSTRACT FROM AUTHOR]

Manganese dioxide (MnO2) nanosheets are regarded as a new class of two-dimensional nanomaterials with several attractive properties with enormous progress in biomedical fields. Gold nanoparticles (AuNPs) are also important biocompatible nanomaterials with unusual optical properties. Hetero-nanostructure of MnO2 and AuNPs with the medium of DNA is an interesting topic. In this work, the protection of the hetero-nanostructure from salt-induced aggregation is systematically investigated including the effects of sequence length, reagents concentrations, incubation time and temperature. The MnO2@Au nanostructures are thus applied for the analysis of miRNA. Duplex-specific nuclease (DSN) catalyzed digestion, hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA) are utilized for signal amplification. By finally analyzing the optical responses of the nanocomponents, highly sensitive analysis of target miRNA can be achieved. Excellent analytical performances are attributed to the unique features of MnO2@Au nanostructures and signal amplification designs. They are promising basis for the construction of novel biosensors for clinical applications.

There are an increasing number of experiments to study programmed cell death/apoptosis, one of the characteristics of which is DNA fragmentation. The only current method for in situ detection of DNA fragmentation is Terminal deoxynucleotidyl transferase mediated-dUTP Nick End Labeling, TUNEL. In this study, a new method for in situ detection of apoptotic DNA fragments, namely In Situ Hybridization Chain Reaction, isHCR, was established. The principle of the assay is that the sticky end sequence of the apoptotic cell DNA fragment non-specifically initiates a hybridization chain reaction that specifically detects the apoptotic cell. The results of the combined TUNEL and isHCR method demonstrated that the majority of isHCR-positive cells were also labeled by TUNEL. In situ HCR often detect DNA fragments in the cytoplasm that the classical TUNEL method couldnot, and these cells may be in the early stages of apoptosis. It also indicates that DNA fragments are transferred to the cytoplasm during apoptosis. Because the staining process does not require terminal deoxynucleotidyl transferase as TUNEL staining does, isHCR staining cost low and can be performed on a large number of tissue specimens. It is believed that isHCR has the potential to detect DNA fragmentation of apoptotic cells in situ. [ABSTRACT FROM AUTHOR]

A versatile triple cascade amplification strategy was developed for ultrasensitive simultaneous detection of multiple cancer biomarkers using single particle inductively coupled plasma mass spectrometry (spICP-MS). The triple cascade amplification strategy consisted of an enhanced RecJf exonuclease-assisted target recycling amplification module, a hybridization chain reaction amplification module, and a signal amplification module based on DNA-templated multiple metal nanoclusters. In the enhanced RecJf exonuclease-assisted target recycling amplification module, the DNA bases at the 5′ ends of aptamers for specific recognition of biomarkers were deliberately replaced by the corresponding RNA bases to enhance amplification efficiency. The signal amplification module based on DNA-templated multiple metal nanoclusters was innovatively used to amplify the signals measured by spICP-MS and at the same time effectively suppress possible background interferences. The proposed spICP-MS platform achieved satisfactory quantitative results for both carcinoembryonic antigen (CEA) and a-fetoprotein (AFP) in human serum samples with accuracy comparable to that of the commercial ELISA kits. Moreover, it has wide dynamic ranges for both CEA (0.01–100 ng/mL) and AFP (0.01–200 ng/mL). The limit of detection for CEA and AFP was 0.6 and 0.5 pg/mL, respectively. Compared with conventional biomarkers detection methods, the proposed spICP-MS platform has the advantages of operational simplicity, ultra-high sensitivity, wide dynamic range, and low background. Therefore, it is reasonable to expect that the proposed spICP-MS platform can be further developed to be a promising alternative tool for biomarker detection in fields of clinical diagnosis and biomedical research. [ABSTRACT FROM AUTHOR]

A fluorescence biosensor has been developed based on hybridisation chain reaction (HCR) amplification coupled with silver nanoclusters (AgNCs) for nucleic acid detection. The fluorescence was activated via end-to-end transfer of dark AgNCs caged within a DNA template to another DNA sequence that could enhance their red fluorescence emission at 611 nm. Such cluster-transfer approach allows us to introduce fluorogenic AgNCs as external signal transducers, thereby enabling HCR to perform in a predictable manner. The resulted HCR-AgNC biosensor was able to detect target DNA with a detection limit of 3.35 fM, and distinguish the DNA target from single-base mismatch sequences. Moreover, the bright red fluorescence emission was detectable with the naked eye, with concentration of target DNA down to 1 pM. The biosensor also performed well in human serum samples with good recovery. Overall, our cluster-transfer approach provides a good alternative to construct HCR-AgNC assay with less risk of circuit leakage and produce AgNCs in a controllable manner. [ABSTRACT FROM AUTHOR]

In the continuous combat against diseases, there is the need for tools that enable an improved diagnostic efficiency towards higher information density combined with reduced time-to-result and cost. Here, a novel fully integrated microfluidic platform, the Evalution™, is evaluated as a potential solution to this need. Encoded microparticles combined with channel-based microfluidics allow a fast, sensitive and simultaneous detection of several disease-related biomarkers. Since the binary code is represented by physically present holes, 210 different codes can be created that will not be altered by light or chemically induced degradation. Exploiting the unique features of this multiplex platform, hybridization chain reaction (HCR) is explored as a generic approach to reach the desired sensitivity. Compared to a non-amplified reference system, the sensitivity was drastically improved by a factor of 104, down to low fM LOD values. Depending on the HCR duration, the assay can be tuned for sensitivity or total assay time, as desired. The huge potential of this strategy was further demonstrated by the successful detection of a multiplex panel of six different nucleic acid targets including viruses and bacteria. The ability to not only discriminate these two categories but, with the same effort, also virus strains (human adenovirus and human bocavirus), virus subtypes (human adenovirus type B and D) and antibiotic-resistant bacteria (Streptococcus pneumonia), exemplifies the specificity of the developed approach. The effective, yet highly simplified, isothermal and protein-enzyme-free signal amplification tool reaches an LOD ranging from as low as 33 ± 4 to 151 ± 12 fM for the different targets. Moreover, direct detection in a clinically relevant sample matrix was verified, resulting in a detection limit of 309 ± 80 fM, approximating the low fM levels detectable with the gold standard analysis method, PCR, without the drawbacks related to protein enzymes, thermal cycling and elaborate sample preparation steps. The reported strategy can be directly transferred as a generic approach for the sensitive and specific detection of various target molecules in multiplex. In combination with the high-throughput capacity and reduced reagent consumption, the Evalution™ demonstrates immense potential in the next generation of diagnostic tools towards more personalized medicine. [ABSTRACT FROM AUTHOR]

Abstract Circulating tumour DNA (ctDNA) has emerged as an ideal biomarker for the early diagnosis and prognosis of gastric cancer (GC). In this work, a pump-free, high-throughput microfluidic chip coupled with catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR) as the signal cascade amplification strategy (CHA–HCR) was developed for surface-enhanced Raman scattering (SERS) assays of PIK3CA E542K and TP53 (two GC-related ctDNAs). The chip consisted of six parallel functional units, enabling the simultaneous analysis of multiple samples. The pump-free design and hydrophilic treatment with polyethylene glycol (PEG) realized the automatic flow of reaction solutions in microchannels, eliminating the dependence on external heavy-duty pumps and significantly improving portability. In the reaction region of the chip, products generated by target-triggered CHA initiated the HCR, forming long nicked double-stranded DNA (dsDNA) on the Au nanobowl (AuNB) array surface, to which numerous SERS probes (Raman reporters and hairpin DNA-modified Cu2O octahedra) were attached. This CHA–HCR strategy generated numerous active “hot spots” around the Cu2O octahedra and AuNB surface, significantly enhancing the SERS signal intensity. Using this chip, an ultralow limit of detection (LOD) for PIK3CA E542K (1.26 aM) and TP53 (2.04 aM) was achieved, and the whole process was completed within 13 min. Finally, a tumour-bearing mouse model was established, and ctDNA levels in mouse serum at different stages were determined. To verify the experimental accuracy, the gold-standard qRT–PCR assay was utilized, and the results showed a high degree of consistency. Thus, this rapid, sensitive and cost-effective SERS microfluidic chip has potential as an ideal detection platform for ctDNA monitoring.

• A new hairpin aptamer-based electrochemical biosensor for tobramycin is developed. • Exo III, DNAzyme and HCR signal amplifications leads to high sensitivity. • Such sensor shows the capability for the detection of low level tobramycin in milk. The residue of tobramycin, a broad spectrum antibiotic commonly used in animal husbandry, has evitable impact on human health, which may cause kidney damage, respiratory paralysis, neuromuscular blockade and cross-allergy in humans. Sensitive monitoring of tobramycin in animal-derived food products is therefore of great importance. Herein, a new aptamer electrochemical biosensor for sensing tobramycin with high sensitivity is demonstrated via exonuclease III (Exo III) and metal ion-dependent DNAzyme recycling and hybridization chain reaction (HCR) signal amplification cascades. Tobramycin analyte binds aptamer-containing hairpin probe to switch its conformation to expose the toehold sequence, which triggers Exo III-based catalytic digestion of the secondary hairpin to release many DNAzyme strands. The substrate hairpins immobilized on the Au electrode (AuE) are then cyclically cleaved by the DNAzymes to form ssDNAs, which further initiate HCR formation of lots of long methylene blue (MB)-tagged dsDNA polymers on the AuE. Subsequently electro-oxidation of these MB labels thus exhibit highly enhanced currents for sensing tobramycin within the 5–1000 nM concentration range with an impressive detection limit of 3.51 nM. Furthermore, this strategy has high selectivity for detecting tobramycin in milk and shows promising potential for detect other antibiotics for food safety monitoring. [ABSTRACT FROM AUTHOR]

Tumor biomarkers are a kind of important biomolecules for aiding cancer diagnosis and assessing tumor efficacy, among which alpha-fetoprotein (AFP) is a crucial tumor biomarker for the early diagnosis of hepatocellular carcinoma. In this study, a novel cascade signal amplifying strategy was designed for the ultrasensitive detection of AFP by DNAzyme cleaving-mediated hybridization chain reaction (HCR). The primary antibody was immobilized on the Au nanoparticles modified glassy carbon electrode, which subsequently captured AFP and the secondary antibody. Then, streptavidin was combined with the biotin-modified secondary antibody and Cu2+-specific DNAzyme. When Cu2+ was present, the substrate strand of the DNAzyme would cleave and produce an ssDNA end. Finally, HCR was triggered to form long double-stranded DNA on the electrode, which would greatly inhibit the charge transfer at the electrode/solution interface. Therefore, the DNAzyme cleaving-mediated HCR strategy can be applied as cascade signal amplification for the ultrasensitive electrochemical determination of tumor biomarker AFP. Under optimal conditions, the immunosensor exhibits a broad linear range of 0.001−100 ng·mL−1 (R2 = 0.990) and a low detection limit of 15.8 fg·mL−1. The proposed sensor displays high sensitivity and selectivity for AFP detection, which can be employed as a universal sensing platform in clinical diagnostics. • A novel electrochemical immunosensor is constructed for ultrasensitive detection of tumor marker AFP. • DNAzyme cleaving mediated HCR is designed for cascading signal amplifying strategy. • The proposed immunosensor shows high sensitivity and specificity for AFP. • This work provides a new strategy for sensitive determination of tumor markers in clinical diagnosis. [ABSTRACT FROM AUTHOR]