Search

EFSA was asked by the European Parliament to provide a scientific opinion on the analysis by the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) of Annex I of the European Commission proposal for a regulation 'on plants obtained by certain new genomic techniques (NGTs) and their food and feed, and amending regulation (EU) 2017/625'. The Panel on genetically modified organisms (GMO) assessed the opinion published by ANSES, which focuses on (i) the need to clarify the definitions and scope, (ii) the scientific basis for the equivalence criteria and (iii) the need to take potential risks from category 1 NGT plants into account. The EFSA GMO Panel considered the ANSES analysis and comments on various terms used in the criteria in Annex I of the European Commission proposal and discussed definitions based on previous EFSA GMO Panel opinions. The EFSA GMO Panel concluded that the available scientific literature shows that plants containing the types and numbers of genetic modifications used as criteria to identify category 1 NGT plants in the European Commission proposal do exist as the result of spontaneous mutations or random mutagenesis. Therefore, it is scientifically justified to consider category 1 NGT plants as equivalent to conventionally bred plants with respect to the similarity of genetic modifications and the similarity of potential risks. The EFSA GMO Panel did not identify any additional hazards and risks associated with the use of NGTs compared to conventional breeding techniques in its previous Opinions. [ABSTRACT FROM AUTHOR]

Copyright of Journal of University of Anbar for Pure Science is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Experimental Technology & Management is the property of Experimental Technology & Management Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Lepidopteran pests are destructive pests and have evolved significant resistance to many insecticides. Alternative green control strategies are urgently needed. Our previous research had revealed that overexpression or knockdown of a Plutella xylostella microRNA, pxy-miR-34-5p, could lead to high mortality and severe developmental defects in multiple lepidopteran pests, thus has great potential in lepidopteran pests control. Here, pxy-miR-34-5p was successfully expressed in cruciferous plants, Arabidopsis thaliana and Brassica campestris. Feeding on leaves of transgenic miR-34-5p rape significantly reduced the expression of ecdysone receptor gene PxEcR of P. xylostella by 56.8–70.2%. Bioassays results demonstrated that compared to that of the larvae fed on wild type Arabidopsis, the accumulated mortalities of P. xylostella fed on transgenic miR-34-5p Arabidopsis were significantly increased by 34.9%–52.0%. After feeding on transgenic miR-34-5p rape leaves for four to six days, the highest accumulated corrected mortalities of P. xylostella, Spodoptera frugiperda and Spodoptera exigua larvae reached 100.0%, 94.1%, and 100.0%, respectively. These results indicated that insect microRNAs can be used to control multiple target pests by constructing transgenic crops, which lays an important foundation for the further development of miRNA-based green pest control strategies. [ABSTRACT FROM AUTHOR]

Abstract EFSA was asked by the European Parliament to provide a scientific opinion on the analysis by the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) of Annex I of the European Commission proposal for a regulation ‘on plants obtained by certain new genomic techniques (NGTs) and their food and feed, and amending regulation (EU) 2017/625’. The Panel on genetically modified organisms (GMO) assessed the opinion published by ANSES, which focuses on (i) the need to clarify the definitions and scope, (ii) the scientific basis for the equivalence criteria and (iii) the need to take potential risks from category 1 NGT plants into account. The EFSA GMO Panel considered the ANSES analysis and comments on various terms used in the criteria in Annex I of the European Commission proposal and discussed definitions based on previous EFSA GMO Panel opinions. The EFSA GMO Panel concluded that the available scientific literature shows that plants containing the types and numbers of genetic modifications used as criteria to identify category 1 NGT plants in the European Commission proposal do exist as the result of spontaneous mutations or random mutagenesis. Therefore, it is scientifically justified to consider category 1 NGT plants as equivalent to conventionally bred plants with respect to the similarity of genetic modifications and the similarity of potential risks. The EFSA GMO Panel did not identify any additional hazards and risks associated with the use of NGTs compared to conventional breeding techniques in its previous Opinions.

We established transformation technologies using Agrobacterium tumefaciens (Smith & Townsend) Conn to insert foreign genes into high THC-containing cannabis (Cannabis sativa L.). The Arabidopsis non-expressor of pathogenesis-related protein 1 (AtNPR1) gene was selected as a potentially useful agronomic gene, which was linked to the bar gene from Streptomyces that encodes herbicide resistance. We investigated how Agrobacterium strains (EHA105 and GV3101), glufosinate concentrations, explant source, and light intensity affected transformation frequency (TF). Transformation was confirmed by RT-PCR with primers for the NPR1 or bar genes. Glufosinate at 0.5-1 mg/L inhibited growth of non-transformed calli within 8 weeks following A. tumefaciens infection. Strain EHA105 yielded a higher TF compared to strain GV3101. Whole leaflets yielded a higher TF compared to sectioned leaf explants with strain GV3101. However, this effect was not seen with EHA105. Petiole segments showed a higher TF than leaf sections with strain EHA105. Placing explants under light or dark conditions did not affect TF, which ranged from 5% to 95% in different experiments. This is the first report of successful transformation of two high THC-containing C. sativa genotypes with two foreign genes simultaneously--AtNPR1 and bar. The recovery of plantlets from transgenic calli was not attempted and awaits further research. Key words: marijuana, genetic engineering, biotechnology, transgenic plants, Introduction Agrobacterium-mediated transformation is a widely used technique for gene insertion into plant genomes (Gelvin 2000, 2003; Anjanappa and Gruissem 2021). The Agrobacterium tumefaciens (Smith & Townsend) Conn (syn. Agrobacterium [...]

Abstract Background For market approval of genetically modified plants (GMPs), the evaluation of agronomic and phenotypic plant traits is a standard requirement and part of the comparative assessment of the GMP and its conventional counterpart. This comparative assessment is a starting point for environmental risk assessment (ERA) and should inform all areas of risk. We scrutinize frequently used approaches to characterize GMPs in EU market applications and discuss their usefulness for drawing conclusions on risks related to the plant’s ability to survive, persist or become invasive. Results Our analysis shows that the agronomic and phenotypic characterization of GMPs, although based on guidelines, is confined to plant traits and test designs that are relevant for the quality control and agronomic performance of genetically modified (GM) crops. We provide evidence of how methodological approaches frequently applied during the agronomic and phenotypic characterization of the GMP could be improved and complemented to better inform on potential phenotypic changes relevant to assessing environmental risks. These approaches refer to (i) the assessment of the survival of GM seeds and plants (e.g., volunteers); (ii) the consideration of environmental exposure and (iii) improved methodological approaches for the assessment of biotic and abiotic stress responses for GMPs. Conclusions The comparative assessment of agronomic and phenotypic plant traits currently does not provide suitable data to draw conclusions on environmental risks relating to the persistence and invasiveness of the GMP. Ecologically more realistic assessments should be part of the phenotypic characterization of GMPs and need guidance and decision criteria to be implemented in ERA. This is of considerable importance, as new genomic techniques are expected to increase the diversity and complexity of GM plants and traits, particularly stress tolerance, which may affect the survival of GMPs in the environment.

Background: For market approval of genetically modified plants (GMPs), the evaluation of agronomic and phenotypic plant traits is a standard requirement and part of the comparative assessment of the GMP and its conventional counterpart. This comparative assessment is a starting point for environmental risk assessment (ERA) and should inform all areas of risk. We scrutinize frequently used approaches to characterize GMPs in EU market applications and discuss their usefulness for drawing conclusions on risks related to the plant's ability to survive, persist or become invasive. Results: Our analysis shows that the agronomic and phenotypic characterization of GMPs, although based on guidelines, is confined to plant traits and test designs that are relevant for the quality control and agronomic performance of genetically modified (GM) crops. We provide evidence of how methodological approaches frequently applied during the agronomic and phenotypic characterization of the GMP could be improved and complemented to better inform on potential phenotypic changes relevant to assessing environmental risks. These approaches refer to (i) the assessment of the survival of GM seeds and plants (e.g., volunteers); (ii) the consideration of environmental exposure and (iii) improved methodological approaches for the assessment of biotic and abiotic stress responses for GMPs. Conclusions: The comparative assessment of agronomic and phenotypic plant traits currently does not provide suitable data to draw conclusions on environmental risks relating to the persistence and invasiveness of the GMP. Ecologically more realistic assessments should be part of the phenotypic characterization of GMPs and need guidance and decision criteria to be implemented in ERA. This is of considerable importance, as new genomic techniques are expected to increase the diversity and complexity of GM plants and traits, particularly stress tolerance, which may affect the survival of GMPs in the environment. [ABSTRACT FROM AUTHOR]

Due to the increase in the global population, there is an urgent call to enhance the crop production through sustainable agriculture. Biological control is a possible solution. There are many examples of biological control agents applied to different crops that have improved their yield or quality, including vegetable and fruit crops and ornamental plants. The Bacillus species have been used as powerful tools since they suppress plant pathogens and promote plant growth as well. During the last five decades, B. thuringiensis has been used as biopesticide in several crops. However, it has some disadvantages such as its instability under field conditions due to sunlight; therefore, frequent applications are necessary, making its use more expensive. To solve this problem, genetically modified crops have been employed to allow the plant to express the toxin in the whole plant. Genetic engineering is a method used to make changes in the genetic material of an organism using scientific techniques. Therefore, genetic engineering opens up opportunities for creating genetically modified plants to increase crop yields and avoid pests. Genetically modified (GM) crops have been cultivated during the last three decades. Transgenic plant technology can be used to address global food scarcity, particularly in developing countries. Genetically modified organisms are a controversial topic that needs to be considered more carefully. Many toxicology studies have confirmed that Bt microbial formulations are safe for consumption. In this review, we will revise the application of Bacillus genes and Bacillus formulations to crops and their safety for human health to provide a more comprehensive understanding of this topic. [ABSTRACT FROM AUTHOR]

Abstract Background Copy number determination is one of the first steps in the characterization of transgenic plant lines. The classical approach to this, Southern blotting, is time-consuming, expensive and requires massive amounts of high-quality genomic DNA. Other PCR-based techniques are either inaccurate, laborious, or expensive. Results Here, we propose a new technique, IMPLANT (Insertion of competitive PCR calibrator for copy number estimation), a competitive PCR-based technique in which the competitor (based on an endogenous gene) is also incorporated in the T-DNA, which then gets integrated in the genome together with the gene of interest. As the number of integrated competitor molecules directly corresponds to the number of transgene copies, the transgene copy number can be determined by a single PCR reaction. We demonstrate that the results of this technique closely correspond with those obtained by segregation analysis in Arabidopsis and digital PCR In rice, indicating that it is a powerful alternative for other techniques for copy number determination. Conclusions We show that this technique is not only reliable, but is also faster, easier, and cheaper as compared with other techniques. Accurate results are obtained in both Arabidopsis and rice, but this technique can be easily extended to other organisms and as such can be widely adopted in the field of biotechnology.

The complete netting of orchards is one strategy to protect fruit trees from pest and pathogen damage by reducing insect movement. When the cultivated trees were derived from genetic engineering (GE), reduced pollinator movement may also reduce outcrossing to cultivated or wild non-GE trees. We report on a field study over four years in a plot of apple tress supplied with insect side nets and covered with hail nets that were closed from shortly before flowering to harvest. A reduced number of arthropods in general, and large bees in particular, were recorded inside the netted plot compared with outside. However, wild bees colonized the plot before the net was closed and built up populations inside. An additional experiment demonstrated that small bees were able to cross the hail net. While the nets were effective in excluding large bees as active pollen vectors, the proportion of small bees acting as such remained unquantified. Furthermore, a companion study showed occasional cross-pollination events through the netting. For the field release of GE apple trees, acceptable levels of outcrossing thus need to be defined. [ABSTRACT FROM AUTHOR]

Background: Copy number determination is one of the first steps in the characterization of transgenic plant lines. The classical approach to this, Southern blotting, is time-consuming, expensive and requires massive amounts of high-quality genomic DNA. Other PCR-based techniques are either inaccurate, laborious, or expensive. Results: Here, we propose a new technique, IMPLANT (Insertion of competitive PCR calibrator for copy number estimation), a competitive PCR-based technique in which the competitor (based on an endogenous gene) is also incorporated in the T-DNA, which then gets integrated in the genome together with the gene of interest. As the number of integrated competitor molecules directly corresponds to the number of transgene copies, the transgene copy number can be determined by a single PCR reaction. We demonstrate that the results of this technique closely correspond with those obtained by segregation analysis in Arabidopsis and digital PCR In rice, indicating that it is a powerful alternative for other techniques for copy number determination. Conclusions: We show that this technique is not only reliable, but is also faster, easier, and cheaper as compared with other techniques. Accurate results are obtained in both Arabidopsis and rice, but this technique can be easily extended to other organisms and as such can be widely adopted in the field of biotechnology. [ABSTRACT FROM AUTHOR]

Global food security is one of the most important challenges for mankind. Growing human population and reduction of available land area are the most important frame conditions for such developments. Plant breeding and applications of the results in crop production are the most important potentials to improve global food security. Some years ago, genetically modified plants made contributions to stabilize feed and food security. Presently, genome editing opens new perspectives in plant breeding. By the way of GE, it would be possible to realize breeding successes in short time and to make the results available to the farmers. In the paper, we inform about the present status of GE, its use on farm level and the challenges for science and policy. [ABSTRACT FROM AUTHOR]

Copyright of Egyptian Journal of Botany is the property of Egyptian National Agricultural Library (ENAL) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background and Aim: Transgenic species are the ones whose genomes are genetically modified. The transgenic field is one of the areas that has a high importance and position in the world. Therefore, the aim of the present research is to draw and analyze the co-authorship network of researchers in transgenic subject area. Materials and Methods: The type of this research is descriptive and was carried out using scientometric techniques such as co-authorship network and social network analysis indices. In this study, 23,456 articles by transgenic researchers indexed in the Web of Science database during the period 2010-2019 were retrieved. VOSviewer and UCINET software were used to draw the co-authorship map and analyze the network indicators. Results: The scientific cooperation network of transgenic researchers was studied and analyzed using macro and micro indicators of the social network. The status of macro indicators was not appropriate and the network was poorly cohesive. So that, the network density was 0.027, the clustering coefficient was 0.834, the diameter was 15 and the average distance was 4.155. In terms of micro-indicators, the status of researchers in the network was determined in such a way that David Ayares had the most cooperation with other members and also Nam-Hai Chua played the most important role in communicating with people from different clusters of the network, finally, Yan Zhang had the shortest distance with other members of the network. Conclusion: Based on the findings, it can be concluded that the co-authorship network of transgenic researchers has low cohesion and information is transmitted among members at a low speed. With respect to this, status of different researchers in this study was determined, the results of this study can be used to guide future collaborations, and encourage universities and scientific institutes to develop their interactions with each other and further strengthen collaborations. It should also be noted that according to the findings of the study in this field, Iranian researchers were not identified as key individuals in this network, which requires research on the status and position of Iranian researchers in the field of transgenics.

It has been a challenge to support the expansion of urban agriculture (UA) in cities due to its poor economic profitability. However, it is also hard to deny the increasing benefits of UA in improving the socio-environmental dimension of cities. Hence, in this review, different aspects of UA were examined to highlight its value beyond profitability such as social, health and well-being, disaster risk reduction, and environmental perspectives. A case study and relevant policies were analyzed to determine how policy makers can bridge the gap between current and future UA practices and sustainable development. Bridging these policy gaps can help the UA sector to sustainably grow and become successfully integrated in cities. Moreover, advancements in UA technologies and plant biotechnology were presented as potential solutions in increasing the future profitability of commercial UA. Consequently, as new UA-related technologies evolve, the multidisciplinary nature of UA and its changing identity from agriculture to digital technology, similarly require adaptive policies. These policies should maximize the potential of UA in contributing to resiliency and sustainability and incentivize the organic integration of UA in cities, while equally serving social justice.

Due to the increase in the global population, there is an urgent call to enhance the crop production through sustainable agriculture. Biological control is a possible solution. There are many examples of biological control agents applied to different crops that have improved their yield or quality, including vegetable and fruit crops and ornamental plants. The Bacillus species have been used as powerful tools since they suppress plant pathogens and promote plant growth as well. During the last five decades, B. thuringiensis has been used as biopesticide in several crops. However, it has some disadvantages such as its instability under field conditions due to sunlight; therefore, frequent applications are necessary, making its use more expensive. To solve this problem, genetically modified crops have been employed to allow the plant to express the toxin in the whole plant. Genetic engineering is a method used to make changes in the genetic material of an organism using scientific techniques. Therefore, genetic engineering opens up opportunities for creating genetically modified plants to increase crop yields and avoid pests. Genetically modified (GM) crops have been cultivated during the last three decades. Transgenic plant technology can be used to address global food scarcity, particularly in developing countries. Genetically modified organisms are a controversial topic that needs to be considered more carefully. Many toxicology studies have confirmed that Bt microbial formulations are safe for consumption. In this review, we will revise the application of Bacillus genes and Bacillus formulations to crops and their safety for human health to provide a more comprehensive understanding of this topic.

CRISPR/Cas9-based ribonucleoprotein (RNP)-mediated system has the property of minimizing the effects related to the unwanted introduction of vector DNA and random integration of recombinant DNA. Here, we describe a platform based on the direct delivery of Cas9 RNPs to soybean protoplasts for genetic screens in knockout geneedited soybean lines without the transfection of DNA vectors. The platform is based on the isolation of soybean protoplasts and delivery of Cas RNP complex. To empirically test our platform, we have chosen a model gene from the soybean genetic toolbox. We have used five different guide RNA (gRNA) sequences that targeted the constitutive pathogen response 5 (CPR5) gene associated with the growth of trichomes in soybean. In addition, efficient protoplast transformation, concentration, and ratio of Cas9 and gRNAs were optimized for soybean for the first time. Targeted mutagenesis insertion and deletion frequency and sequences were analyzed using both Sanger and targeted deep sequencing strategies. We were able to identify different mutation patterns within insertions and deletions (InDels) between C 5 nt and -30 bp and mutation frequency ranging from 4.2 to 18.1% in the GmCPR5 locus. Our results showed that DNA-free delivery of Cas9 complexes to protoplasts is a useful approach to perform early-stage genetic screens and anticipated analysis of Cas9 activity in soybeans. [ABSTRACT FROM AUTHOR]

Vaccination is the most suitable and persuasive healthcare program for the prohibition of various deadly diseases. However, the higher production cost and purification strategies are out of reach for the developing nations. In this scenario, development of edible vaccine turns out to be the most promising alternative for remodeling the pharmaceutical industry with reduced production and purification costs. Generally, oral route of vaccination is mostly preferred due to its safety, compliance, low manufacturing cost and most importantly the ability to induce immunity in both systemic and mucosal sites. Genetically modified microorganisms and plants could efficiently be used as vehicles for edible vaccines. Edible vaccines are supposed to reduce the risk associated with traditional vaccines. Currently, oral vaccines are available in the market for several viral and bacterial diseases like cholera, hepatitis B, malaria, rabies etc. Herein, the review focuses on the breakthrough events in the area of edible vaccines associated with dietary microbes and plants for better control over diseases. [ABSTRACT FROM AUTHOR]

Previous studies reported adverse effects of genetically engineered maize that produces insecticidal Cry proteins from Bacillus thuringiensis (Bt) on the water flea Daphnia magna. In the current study, effects of flour, leaves, or pollen from stacked Bt maize that contains six Bt proteins (SmartStax) in two plant backgrounds on life table parameters of D. magna were investigated. Adverse effects were observed for Bt maize flour, originating from different production fields and years, but not for leaves or pollen, produced from plants grown concurrently in a glasshouse. Because leaves contained eight to ten times more Cry protein than flour, the effects of the flour were probably not caused by the Cry proteins, but by compositional differences between the plant backgrounds. Furthermore, considering the natural range of variation in the response of D. magna to conventional maize lines, the observed effects of Bt maize flour were unlikely to be of biological relevance. Our study demonstrates how Cry protein effects can be separated from plant background effects in non-target studies using Bt plant material as the test substance and how detected effects can be judged for their biological relevance.

The complete netting of orchards is one strategy to protect fruit trees from pest and pathogen damage by reducing insect movement. When the cultivated trees were derived from genetic engineering (GE), reduced pollinator movement may also reduce outcrossing to cultivated or wild non-GE trees. We report on a field study over four years in a plot of apple tress supplied with insect side nets and covered with hail nets that were closed from shortly before flowering to harvest. A reduced number of arthropods in general, and large bees in particular, were recorded inside the netted plot compared with outside. However, wild bees colonized the plot before the net was closed and built up populations inside. An additional experiment demonstrated that small bees were able to cross the hail net. While the nets were effective in excluding large bees as active pollen vectors, the proportion of small bees acting as such remained unquantified. Furthermore, a companion study showed occasional cross-pollination events through the netting. For the field release of GE apple trees, acceptable levels of outcrossing thus need to be defined.

Background and Aim: Transgenic species are the ones whose genomes are genetically modified. The transgenic field is one of the areas that has a high importance and position in the world. Therefore, the aim of the present research is to draw and analyze the co-authorship network of researchers in transgenic subject area. Materials and Methods: The type of this research is descriptive and was carried out using scientometric techniques such as co-authorship network and social network analysis indices. In this study, 23,456 articles by transgenic researchers indexed in the Web of Science database during the period 2010- 2019 were retrieved. VOSviewer and UCINET software were used to draw the co-authorship map and analyze the network indicators. Results: The scientific cooperation network of transgenic researchers was studied and analyzed using macro and micro indicators of the social network. The status of macro indicators was not appropriate and the network was poorly cohesive. So that, the network density was 0.027, the clustering coefficient was 0.834, the diameter was 15 and the average distance was 4.155. In terms of micro-indicators, the status of researchers in the network was determined in such a way that David Ayares had the most cooperation with other members and also Nam-Hai Chua played the most important role in communicating with people from different clusters of the network, finally, Yan Zhang had the shortest distance with other members of the network. Conclusion: Based on the findings, it can be concluded that the co-authorship network of transgenic researchers has low cohesion and information is transmitted among members at a low speed. With respect to this, status of different researchers in this study was determined, the results of this study can be used to guide future collaborations, and encourage universities and scientific institutes to develop their interactions with each other and further strengthen collaborations. It should also be noted that according to the findings of the study in this field, Iranian researchers were not identified as key individuals in this network, which requires research on the status and position of Iranian researchers in the field of transgenics. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Bee pollinators are an important guild delivering a fundamental input to European agriculture due to the ecological service they provide to crops in addition to the direct economic revenues from apiculture. Bee populations are declining in Europe as a result of the effects of several environmental stressors, both natural and of anthropic origin. Efforts are ongoing in the European Union (EU) to improve monitoring and management of pollinator populations to arrest further declines. Genetically modified (GM) crops are currently cultivated in a limited area in Europe, and an environmental risk assessment (ERA) is required prior to their authorization for cultivation. The possible impacts of GM crops on pollinators are deemed relevant for the ERA. Existing ecotoxicological studies indicate that traits currently expressed in insect‐resistant GM plants are unlikely to represent a risk for pollinators. However, new mechanisms of insect resistance are being introduced into GM plants, including novel combinations of Cry toxins and double strand RNA (dsRNA), and an ERA is required to consider lethal and sublethal effects of these new products on nontarget species, including insect pollinators. The evaluation of indirect effects linked to the changes in management practices (e.g. for herbicide‐tolerant GM crops) is an important component of EU regulations and a requirement for ERA. This paper reviews current approaches used to test the sensitivity of pollinators to GM plants and their products to determine whether sufficient data are being provided on novel GM plants to satisfy EU risk assessment requirements. © 2021 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

The global industrialization and modernization have witnessed a rapid progress made in agricultural production, along with the issue of soil heavy metal (HM) pollution, which has posed severe threats to soil quality, crop yield, and human health. Phytoremediation, as an alternative to physical and chemical methods, offers a more cost-effective, eco-friendly, and aesthetically appealing means for in-situ remediation. Despite its advantages, traditional phytoremediation faces challenges, including variable soil physicochemical properties, the bioavailability of HMs, and the slow growth and limited biomass of plants used for remediation. This study presents a critical overview of the predominant plant-based HM remediation strategies. It expounds upon the mechanisms of plant absorption, translocation, accumulation, and detoxification of HMs. Moreover, the advancements and practical applications of phyto-combined remediation strategies, such as the addition of exogenous substances, genetic modification of plants, enhancement by rhizosphere microorganisms, and intensification of agricultural technologies, are synthesized. In addition, this paper also emphasizes the economic and practical feasibility of some strategies, proposing solutions to extant challenges in traditional phytoremediation. It advocates for the development of cost-effective, minimally polluting, and biocompatible exogenous substances, along with the careful selection and application of hyperaccumulating plants. We further delineate specific future research avenues, such as refining genetic engineering techniques to avoid adverse impacts on plant growth and the ecosystem, and tailoring phyto-combined strategies to diverse soil types and HM pollutants. These proposed directions aim to enhance the practical application of phytoremediation and its integration into a broader remediation framework, thereby addressing the urgent need for sustainable soil decontamination and protection of ecological and human health. [ABSTRACT FROM AUTHOR]

The European Commission requested EFSA to provide an overview on the risk assessment of plants developed through new genomic techniques (NGTs), taking into account its previous scientific opinions, its ongoing work on the topic as well as opinions published by competent authorities and national institutions since 2012, where available. In this report, NGTs are defined as techniques capable to change the genetic material of an organism and have emerged or developed since the adoption of the 2001 genetically modified organism (GMO) legislation. EFSA considered 16 scientific opinions issued by European member states (‘MS opinions’) as well as three EFSA GMO Panel scientific opinions on NGTs. A procurement to evaluate and summarise the MS opinions was conducted. Relevant information on the description of each NGT and information on the risk assessment of plants developed through one or a combination of the defined NGTs was extracted and summarised. The baseline for the types and nature of NGTs to be included in this report was defined based on the JRC, 2011 report on new plant breeding techniques as well as on the Explanatory Note on New Techniques in Agricultural Biotechnology from the European Commissioner for Health and Food Safety (EC‐SAM, 2017) for some more recently developed NGTs, taking into account the NGT definition provided by the European Commission for this mandate. EFSA was not requested to develop new opinions on plants developed through specific NGTs, and thus, no critical appraisal of the reviewed scientific opinions was carried out.This publication is linked to the following EFSA Supporting Publications article: http://onlinelibrary.wiley.com/doi/10.2903/sp.efsa.2021.EN-1973/full [ABSTRACT FROM AUTHOR]

The environmental risk assessment (ERA) for genetically modified plants (GMPs) is a prerequisite for commercial approval of these new varieties according to regulatory systems worldwide. The first country to regulate GM crops was the USA and the issue of possible environmental impacts was based on the principles used in risk assessment of pesticides. Two main pillars of this approach are the use of surrogate species for testing effects on non-target organisms using a tiered assessment with clear thresholds to indicate the need to move between tiers. The latest EFSA guidance document on ERA of Genetically Modified Organisms considers specifically the receiving environment in preparation of ERA for commercial cultivation of GMPs. According to existing guidelines in the EU, the receiving environment is defined by three mutually interacting components: the characteristics of the environmental stressor (i.e. the GM plant), the bio-geographical regions where the commercial release of the crop is expected and the agricultural systems therein. Difference in agronomic and ecological conditions (e.g. use of different varieties, vegetation of adjacent areas, non-target species assemblages, sensitivity of local species to the stressors) suggests that explicit considerations of the receiving environments are necessary. Results from field experiments indicate that differences in cultivation practices, e.g. the herbicide regime used on herbicide-tolerant GM crops, may induce direct and indirect effects on wild plant distribution and abundance, with consequent repercussions on food webs based on these plants. Moreover, ecological literature indicates that the concept of surrogate species has clear limitations if applied broadly to any ERA. Starting from case studies regarding GMPs, this paper discusses some ecological and agronomic characteristics of agro-ecosystems, which have implications in the elaboration of both hazard and exposure analyses during ERA. The species selection approach indicated in the EFSA Guidance Document and the consideration of the area(s) of the expected release of the new variety may provide the basis to an ecologically sound ERA for a range of environmental stressors. The quality of the data that become available for risk managers with this approach may support a more transparent and dependable ERA and risk management for GMPs as well as for other potential environmental stressors in agro-ecosystems.

Environmental safety standards for agricultural genetically modified organisms (GMOs) has become an important technical support for the safety management of GMOs in China. By January 2021, the Ministry of Agriculture/Ministry of Agriculture and Rural Affairs had released 47 environmental safety standards for agricultural GMOs. This paper summarizes the status quo of China's agricultural GMOs environmental safety standards system, and comparatively analyzes the development of agricultural GMOs environmental safety standards in the domestic and foreign, and discusses the development direction of agricultural GMOs environmental safety standards system construction in the future. We hope to provide reference for further improvement of China's agricultural GMOs environmental safety standards, which will provide better technical support for its safety management. [ABSTRACT FROM AUTHOR]