Search

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study aimed to investigate the effect of ultrasound combined with highland barley dietary fiber (HBDF) on the quality of reduced‐salt chicken breast myofibrillar protein (MP) gel. The molecular forces maintaining gel structure, the gelling formation process, and gel microstructure of different groups, two control groups (2% sodium chloride [NaCl] group, 1% NaCl group), and four treatment groups (0.3% HBDF+U5, 0.3% HBDF+U10, 0.5% HBDF+U5, and 0.5% HBDF+U10) were examined. Results indicated significant improvements (p < 0.05) in gel properties such as water‐holding capacity, textural characteristics, and color of the MP gel of the four treatment groups compared to Control 2 (1% NaCl) group. Furthermore, the second structural alterations were characterized by increase β‐sheet, β‐turn, and random coil structure contents in treatment groups, especially in 0.3% HBDF+U5 and 0.5% HBDF+U5 groups; in addition, the exposure of more hydrophobic groups and the formation of disulfide bonds and hydrogen bonds were promoted in treatment groups, thus enhancing protein aggregation and gel quality. Finally, compared to Control 2 (1% NaCl) group, more compact and uniform gel network structures and pores inside the composite gels were observed in treatment groups. In conclusion, the findings demonstrated that the application of ultrasound in combination with HBDF improved the gelling characteristics of reduced‐salt chicken breast MP gel, especially 0.3% HBDF+U5 and 0.5% HBDF+U5 groups. [ABSTRACT FROM AUTHOR]

Milk fan cheese, a type of stretched cheese, presents challenges in its stretch forming. This study investigated the effects of complex phosphates (sodium tripolyphosphate and sodium dihydrogen phosphate, STPP-DSP) on the gelling properties of acid-induced milk fan gel and the mechanisms contributing to its stretch forming. The treatment of milk fan gel with STPP-DSP resulted in improved functional and textural properties compared with the control group. In particular, drawing length increased significantly from 69.67 nm to 80.33 nm, and adhesiveness increased from 1,737.89 g/mm to 1,969.79 g/mm. The addition of STPP-DSP also led to increased viscosity, elastic modulus (G′), and viscous modulus (G″). Microstructural analysis revealed the formation of a fibrous structure within the gel after STPP-DSP treatment, facilitating uniform embedding of fat globules and emulsification. Structural analysis showed that the addition of STPP-DSP increased β-fold and decreased random coiling of the gel, facilitating the unfolding of protein structures. Additionally, UV absorption spectroscopy and excitation emission matrix spectroscopy results indicated the formation of a chelate between STPP-DSP and milk fan gel, increasing protein-protein molecular interactions. Evidence from differential scanning calorimetry and X-ray diffraction demonstrated the formation of sodium caseinate chelate. Fourier transform infrared spectroscopy and zeta potential analysis revealed that the sodium caseinate chelate formed through hydrophobicity, hydrogen bonding, and electrostatic forces. These findings provided theoretical insights into how phosphates can improve the stretch forming of milk fan gel, facilitating the application of phosphate additives in stretched-cheese processing. The list of standard abbreviations for JDS is available at adsa.org/jds-abbreviations-24. Nonstandard abbreviations are available in the Notes. [Display omitted] [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

BACKGROUND RESULTS CONCLUSION The impact of β‐sitosterol+γ‐oryzanol‐based oleogels or peanut oil on the protein conformation and gel quality of Nemiperus virgatus surimi was evaluated.A significant reduction in gel strength, texture parameters and water holding capacity (WHC) of surimi was found as oil concentration increased (P < 0.05). However, compared with peanut oil, the gel strength, hydrophobic interaction and disulfide bond content of surimi gel containing oleogels increased by 6.919%, 32.635% and 12.409%, respectively, when the oil concentration was 10 g kg−1. Both oleogels and peanut oil could enhance the whiteness of surimi gel. Oleogels induced the unfolding of surimi proteins, and promoted the conformational shift from α‐helix to β‐sheet structure. Furthermore, oleogels filled the gaps of protein networks to make the microstructure of surimi gel more compact and uniform, improving the WHC and reducing the cooking loss.γ‐Oryzanol+β‐sitosterol‐based oleogel alleviated the adverse influences of direct addition of peanut oil on the gel and textural properties of surimi products. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Myofibrillar proteins (MPs), the most important proteins in muscle, play a vital role in the texture, flavor, sensory and consumer acceptance of final muscle-based food products. Over the past several decades, conjugation of carbohydrates to MPs via glycosylation is of particular interest due to the substantial enhancement in MPs characteristics. Studying the covalent interactions between carbohydrates and MPs under various processing conditions and molecular mechanisms by which carbohydrates affect the functionalities of MPs can introduce new perspectives for design and production of muscle-based foods. However, there is no insightful and comprehensive summary of the structural, physicochemical and functional characteristics changes of MPs induced by glycosylation modification and how these changes can be adopted to potentially promote the science-based development of tailor-made muscle foods. Based on this, the functionalities of MPs as well as their practical limiting issues are initially highlighted. A comprehensive overview of fabrication strategies is then introduced. Additionally, changes in the structural and functional properties of MPs regulated by glycosylation have also been carefully summarized. On this basis, the research limitations to be solved and our perspectives for the future development of muscle-based foods are put forward. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

How to improve the gel properties of protein has become a research focus in the field of seafood processing. In this paper, a fucoidan (FU)–vegetable oil emulsion was prepared, and the mechanism behind the effect of emulsion on protein conformation and the heat-induced gel properties was studied. The results revealed that the FU–vegetable oil complex caused the aggregation and cross-linking of myosin, as well as increased the surface hydrophobicity and total sulfhydryl content of myosin. In addition, the addition of the compound (0.3% FU and 1% vegetable oil) significantly improved the gel strength, hardness, chewiness, and water-holding capacity of the myosin gel (p < 0.05). In particular, when the addition of camellia oil was 1%, the gel strength, hardness, chewiness, and water-holding capacity had the highest values of 612.47 g.mm, 406.80 g, 252.75 g, and 53.56%, respectively. Simultaneously, the emulsion (0.3% FU-1% vegetable oil) enhanced the hydrogen bonds and hydrophobic interaction of the myosin gels. The image of the microstructure showed that the emulsion with 0.3% FU-1% vegetable oil improved the formation of the stable three-dimensional network structure. In summary, the FU–vegetable oil complex can promote unfolding of the protein structure and improve the gel properties of myosin, thus providing a theoretical basis for the development of functional surimi products. [ABSTRACT FROM AUTHOR]

BACKGROUND RESULTS CONCLUSION This study investigated the contribution of 11 polysaccharides (2%, w/w), including pectin (PC), κ‐carrageenan (KC), ι‐carrageenan (IC), gellan gum (GG), guar gum (GM), sodium alginate (SA), konjac gum (KG), gum arabic (GA), fucoidan (FC), locust bean gum (LBG), and curdlan (CD), to the gel and microstructural properties of Meretrix meretrix clam gel (MMG).The hardness, springiness and chewiness of MMG with KC, IC, GG, SA and FC addition increased by ~10%–250%, while PC, GM, KG and LBG groups decreased by ~0.6% to 69%. KC, IC, SA, GG and FC decreased the cooking loss rate (CLR) by 69.4% to 88.7% and correspondingly enhanced the water holding capacity (WHC) by 10.2% to 21.4%, which was accompanied by an increased bound water and immobilized water area and high hydrogen proton density. The addition of KC transformed the MMG microstructure from a loose network with large pores to a compact, dense network, reducing lacunarity by 57.9%. The primary intermolecular forces in MMG with the incorporation of KC, IC, GG, SA and FC were hydrophobic interactions and disulfide bonds, which increased by 32.8%‐105.3% and 45.6%‐114.5% than MMG alone, respectively.Collectively, KC, IC, GG, SA and FC could improve the gel properties of MMG and the strongest synergistic combination was found in the MMG/KC system. This study suggests that the incorporation of polysaccharides is a strategy with potential for modifying the gel properties of shellfish surimi products. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

BACKGROUND: The quality of surimi‐based products can be improved by combining the flesh of different aquatic organisms. The present study investigated the effects of incorporating diverse ratios of unwashed silver carp (H) and scallop (A) and using various thermal treatments on the moisture, texture, microstructure, and conformation of the blended gels and myofibrillar protein of surimi. RESULTS: A mixture ratio of A:H = 1:3 yielded the highest gel strength, which was 60.4% higher than that of scallop gel. The cooking losses of high‐pressure heating and water‐bath microwaving were significantly higher than those of other methods (P < 0.05). Moreover, the two‐step water bath and water‐bath microwaving samples exhibited a more regular spatial network structure compared to other samples. The mixed samples exhibited a microstructure with a uniform and ordered spatial network, allowing more free water to be trapped by the internal structure, resulting in more favorable gel properties. The thermal treatments comprehensively modified the tertiary and quaternary structures of proteins in unwashed mixed gel promoted protein unfurling, provided more hydrophobic interactions, enhanced protein aggregation and improved the gel performance. CONCLUSION: The findings of the present study improve our understanding of the interactions between proteins from different sources. We propose a new method for modifying surimi's gel properties, facilitating the development of mixed surimi products, as well as enhancing the efficient utilization of aquatic resources. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Copyright of Food & Fermentation Industries is the property of Food & Fermentation Industries and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The gel properties and molecular conformation of Spanish mackerel myofibrillar protein (MP) induced by soy protein isolate–inulin conjugates (SPI–inulin conjugates) were investigated. The addition of SPI–inulin conjugates significantly enhanced the quality of the protein gel. An analysis of different additives was conducted to assess their impact on the gel strength, texture, water-holding capacity (WHC), water distribution, intermolecular force, dynamic rheology, Raman spectrum, fluorescence spectrum, and microstructure of MP. The results demonstrated a substantial improvement in the strength and water retention of the MP gel with the addition of the conjugate. Compared with the control group (MP), the gel strength increased from 35.18 g·cm to 41.90 g·cm, and WHC increased from 36.80% to 52.67% with the inclusion of SPI–inulin conjugates. The hydrogen bond content was notably higher than that of other groups, and hydrophobic interaction increased from 29.30% to 36.85% with the addition of SPI–inulin conjugates. Furthermore, the addition of the conjugate altered the secondary structure of the myofibrillar gel, with a decrease in α-helix content from 62.91% to 48.42% and an increase in β-sheet content from 13.40% to 24.65%. Additionally, the SPI–inulin conjugates led to a significant reduction in the endogenous fluorescence intensity of MP. Atomic force microscopy (AFM) results revealed a substantial increase in the Rq value from 8.21 nm to 20.21 nm. Adding SPI and inulin in the form of conjugates is an effective method to improve the gel properties of proteins, which provides important guidance for the study of adding conjugates to surimi products. It has potential application prospects in commercial surimi products. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The study analyzed the impact of adding Moringa oleifera dietary fiber (MDF) on the gel strength, color, water-holding capacity, protein secondary structure, microstructure, rheology, and texture properties of silver carp surimi. The results showed that incorporating 0.1%, 0.3% and 0.6% MDF into silver carp surimi resulted in enhanced gel strength, water-holding capacity and texture compared with pure silver carp surimi. The addition of 0.9% MDF significantly reduced the whiteness of silver carp surimi. For all surimi gels, the storage modulus (G’) was higher than the loss modulus (G”), confirming the gel structure of the surimi. Fourier transform infrared (FTIR) spectroscopy showed that the addition of MDFs had little effect on the protein secondary structure of the surimi. Compared with the pure surimi group, the ionic bonding and hydrophobic interaction in the surimi gel with 0.6% MDF addition significantly increased (P < 0.05), indicating enhanced intermolecular interaction in the gel. Therefore, the addition of 0.6% MDF in silver carp surimi resulted in more uniform network structure and an increase in the dietary fiber content. This study provides an effective approach to improve the processing performance and nutritional quality of silver carp surimi, and provides a reference for the development and utilization of M. oleifera dietary fiber.

Composite gel network systems were prepared by mixing sodium alginate (ALG) with low methoxyl pectin (LMP) with the addition of Ca2+. The effect of different LMP/ALG ratios and Ca2+ concentrations on gel properties including gel strength, moisture state and gel network structure was investigated. At an LMP/ALG ratio of 3:7, the largest gel strength of 0.545 N. The gel strength increased with the increase in Ca2+ concentration, and the gel network showed a dense microstructure with small pores. The rheological properties of the composite gels were analyzed based on three strain models, revealing that the two polysaccharides formed an interpenetrating network in the composite gel system. This study provides a scientific reference and theoretical basis for improving the gel properties of ALG and LMP and for expanding their applications in foods.

Abstract It is crucial to improve the gel properties of myofibrillar protein (MP) in the production of surimi products. This study investigated the effects of combining acetylated distarch phosphate (ADSP) with pea protein isolate (PPI) as exogenous additives on the physicochemical properties of Larimichthys crocea MP gel and elucidated the molecular mechanisms underlying the improvement of MP gel quality. The results showed that the mixture of 3% ADSP and 1% PPI increased the MP gel strength to 2.1 times and water holding capacity to 1.8 times. The rheological properties during thermal‐induced gelation were improved, and the surface roughness of gel microstructure was reduced. The protein conformation was stabilized by enhancing surface hydrophobicity and sulfhydryl content, and the gels showed trends of decreasing α‐helix and increasing random coils. Correlation and cluster analysis showed that physicochemical properties of MP gels were closely related to the changes of protein structure and the denaturation of active groups. The molecular interaction between ADSP, PPI, and MP and the mechanism of enhancing the properties and functions of MP gel were further clarified. These findings highlight the feasibility of ADSP–PPI as an effective strategy to improve the quality of fish MP gel.

To improve the flavor of fish protein gelatin, the glycation reaction system was constructed with glucose, and use microplate readers, colorimeters, texture analyzers, rheometers, and gas chromatography-mass spectrometers were used to determine the free amino group, color, gel strength, gelling temperature, and volatile flavor changes of fish protein gelatin and explore the effects of different glycation times on volatile flavor substances and gel properties. The results showed that the glycation reaction time increased from 0 h to 24 h, the yellowness of fish protein increased, the free amino group content decreased (P0.05). When the glycation reaction was 6 h, the relative content of total aldehyde content was the lowest at 47.09%, and the relative contents of nonanal, declal and octanal, which produced unpleasant odors, were reduced by 9.64%, 7.88% and 1.39%, respectively. With the increase of glycation time, the gel strength of fish protein gelatin decreased, and the gel strength reached the maximum value at 6 h of glycation reaction. Therefore, the glycation reaction for 6 h could effectively improve the flavor characteristics of fish protein gelatin. The results of this study can provide a theoretical basis for the flavor improvement of fish protein gelatin.

This study aimed to investigate the effect of oxidized dihydromyricetin (oDMY) on the gel properties of silver carp (Hypophthalmichthys molitrix) surimi. The changes in gel strength, rheological properties, water-holding capacity, microstructure, protein secondary structure, particle size distribution, color, and sensory properties of surimi gels were analyzed after adding different concentrations (0%, 0.15%, 0.30%, 0.45%, 0.60%) of oDMY. The results showed that the addition of oDMY increased the relative content of β-sheet proteins during the gel formation process, leading to larger particle size due to protein aggregation, and consequently resulting in a denser gel network structure with smaller pores. Furthermore, the water-holding capacity of the surimi gels was improved by the addition of oDMY. As the concentration of oDMY increased, the breaking force and deformation of the surimi gels increased, especially at the concentration of 0.45%, which exhibited the most significant enhancement in breaking force. Dynamic rheological tests further demonstrated that oDMY had a certain delaying effect on gel deterioration. The addition of oDMY resulted in a decrease in whiteness of the surimi gels. However, at lower concentrations, the impact on color remained within an acceptable range, and oDMY positively contributed to the flavor improvement of the surimi gels. Overall, the addition of 0.45% oDMY effectively improved the characteristics of silver carp surimi gels, providing valuable reference for the development of novel surimi products.

BACKGROUND: The gelation properties of myofibrillar protein (MP) directly affect the texture, taste and water‐holding capacity (WHC) of meat products. To enhance the gelation properties of single‐species meat MP, the present study investigated the influence of different proportions of beef, pork and chicken MP on the physicochemical properties, structure and gelation properties of the MP. RESULTS: The results revealed that, when the proportion reached 5:2:3, the particle size decreases, leading to the maximum decomposition and unfolding of MPs, which exposes a greater number of hydrophobic amino acid residues. These changes promote interactions between protein molecules, especially the unfolding of α‐helices and the formation of β‐sheets during the heating process, which provides favorable conditions for the formation of protein gels and improves the gel strength and WHC of MP gels. Additionally, scanning electron microscopy revealed that the mixed MP gels are more compact and have more uniform gel networks and pores compared to single‐species MP gels. CONCLUSION: Based on these results, the synergistic effect is induced by the interactions between proteins from different. This research provides a method for the subsequent development of new meat products and improvement of meat product quality, and also lays a theoretical foundation for composite research of proteins from different sources. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Summary: This study aimed to investigate the effects of different oxidation modes on the functional and gel properties of hazelnut proteins. The solubility of hazelnut protein showed a small trend when the oxidation level was low, and it decreased significantly with the increase in concentration. The maximum value of water‐holding capacity (WHC), emulsifying activity index (EAI), and emulsion stability index (ESI) was 343.33%, 56.00 m2 g−1, and 75.85 min at AAPH concentration of 1.0 mmol L−1, respectively. The functional properties of hazelnut proteins, except oil‐holding capacity (OHC), gradually reduced with the increase in malondialdehyde (MDA) concentration. H2O2 modified improved OHC, foaming capacity, foam stability, and EAI of hazelnut proteins, whereas WHC and ESI gradually decreased. The results of the secondary structure of hazelnut protein gels indicated a high ratio of α‐helix and β‐fold of the gels. Also, the increase in oxidation led to an increase in the gels' voids. Also, oxidation led to a rough and loose network structure of hazelnut protein gels. These results suggested that peroxyl radical, hydroxyl radical, and MDA produced during lipid peroxidation affected the interfacial properties of hazelnut protein and disrupted the formation of hazelnut protein gel, thus affecting the quality of hazelnut protein. [ABSTRACT FROM AUTHOR]

Artemisia sphaerocephala Krasch. polysaccharide (ASKP) is a novel plant polysaccharide. In this study, an aqueous two-phase system (ATPS) consisting of gelatin (Gel) as the dispersed phase and ASKP 60P (a high-molecular-mass fraction of ASKP) as the continuous phase was constructed based on the thermodynamic incompatibility between 60P and Gel at a specific pH, and Gel/60P ATPS emulsion gels were obtained by introducing Fe3+ into the ATPS in order to induce 60P cross-linking. The results showed that the ATPS, consisting of 0.1%–0.5% Gel and 0.5%–1.5% 60P (m/m), exhibited discrete phase separation. The emulsion gel with 0.6% Gel, 1.5% 60P and 60 mmol/L Fe3+ showed good gel strength and elasticity. This was attributed to the fact that the increase in Gel concentration led to a decrease in the volume proportion of the continuous phase, resulting in exposure of more Fe3+ crosslinking sites, enhancing the interaction between 60P and Fe3+, and improving the mechanical properties of emulsion gels. Therefore, this study proposes a new strategy to improve the properties of ASKP gels, which is favorable for the wide application of ASKP in the food, biological and other fields.

To develop low-salt meat products and achieve the reduction in costs of meat production, the effect of konjac gum on the gel properties of soy protein isolate (SPI)-myofibrillar protein (MP) composite at various salt concentrations was investigated in this study. For the purpose of evaluating the effects of SPI, konjac gum, salt concentration, and other factors on MP gel formation, rheological properties and microstructures of the SPI-MP composite gels were analyzed using a rheometer and scanning electron microscopy. The obtained results indicated that at low salt concentration (0.3 mol/L NaCl), the gel strength of 3% MP-1% SPI composite gel significantly increased (P

The effects of the addition of curdlan gel with two different forms, thermal reversible curdlan gum (TRC) and thermal irreversible curdlan gum (TIRC) on the gelling properties and in vitro digestibility of myofibrillar proteins (MP) gel were investigated. The results showed that the gel strength and water holding capacity of MP gel significantly increased with increasing TRC or TIRC concentration (P0.05). Therefore, this study provides a theoretical basis for the effect of TRC or TIRC on the formation and in vitro digestion of MP gel, and lays a technical support for the application of curdlan gum in meat industry.

To further develop a protein-polysaccharide composite fat replacer in low-fat meat products, this used pumpkin seed protein (PSP) and carrageenan to prepare a composite emulsion fat replacer, and added it to myofibrillar protein (MP) to form heat induced gel. The effects of the composite emulsion formed by PSP and carrageenan at various additive amounts on the properties of MP gels were investigated through the determination of gel moisture distribution, textural properties, microstructure, rheological properties, and other indexes. The results showed that when PSP and carrageenan composite emulsion was added at 50%, the water-holding properties and strength of the gel significantly improved (P

Objective: To explore the potential of minor beans as ingredients for starch gel foods. Methods: The basic compositions were analyzed, as well as the hydration, pasting, and gel properties of five kinds of minor bean flours, including mung beans, peas, white kidney beans, red beans, and chickpeas. Results: The water absorption index （WAI） of Mung bean powder at 90 ℃ and the water solubility index （WSI） at 40 ℃, the water absorption was better. In gelatinization results, mung bean powder had the highest recovery value, and showed good gelatinability. The results showed that the hardness and chewability of mung bean gel were significantly higher than those of other mixed bean powder, and the gel had certain elasticity and strong chewability. Mung bean gel has no bubbles, uniform surface, good smoothness and longest stretching distance. Conclusion: Mung beans may be the most suitable raw material among the five kinds of minor beans as gel-based food ingredients.

Aiming to improve the gel property of egg white proteins, in this research, taking egg white protein (EWP) as the research object, the changes in texture, water-holding ratio, molecular forces, Fourier transform infrared chromatography, circular dichroism spectrum, particle size, potential, sulphydryl content, surface hydrophobicity, and scanning electron microscopy were analyzed to explore the mechanism and structural changes of heat-induced gel of EWP after the treatments of Ultra-high Pressure (UHP), Transglutaminase (TG) and Ultra-high Pressure Synergistic Transglutaminase (UTG). The results showed that the hardness, elasticity and water holding capacity of UHP-EWP, TG-EWP and UTG-EWP were all improved, and hydrophobic interaction was the main force to maintain gel. The α-helix content of UHP-EWP, TG-EWP and UTG-EWP decreased, while the β-fold content increased. The average particle size and absolute potential of UHP-EWP decreased, while the changes of TG-EWP and UTG-EWP were opposite. The content of free sulfhydryl groups in UHP-EWP, TG-EWP, and UTG-EWP increased, the content of total sulfhydryl groups decreased, and the surface hydrophobicity increased. The gel structure was more compact and smooth, and the flatness was improved. This research provides a theoretical basis and research ideas for the heat induced gel modification of EWP.

This study investigated the effects of different concentrations (0.1%, 0.3%, 0.5%, 0.8% and 1.0% by mass relative to shrimp meat) of hyaluronic acid (HA) on the gel and physicochemical properties of surimi made from Litopenaeus vannamei. The results showed that adding a certain amount of HA improved the textural characteristics, gel strength, brightness and whiteness of shrimp surimi gel, promoted the transformation of free and immobilized water into bound water, and increased the water-binding characteristics and water-holding capacity. Rheological analysis showed that addition of a certain amount of HA improved the storage moduli of shrimp surimi, but low concentrations of HA could have adverse effects on the apparent viscosity. Chemical force analysis showed that ionic bonds first decreased and then increased, while hydrogen bonds exhibited the opposite trend with the addition of HA. An appropriate amount of HA could improve hydrophobic interactions but the formation of disulfide bonds from sulfhydryl oxidation was also inhibited by HA. Moreover, HA could interact with shrimp surimi proteins, inhibit the formation of protein polymers, change the conformation of proteins, and promote the transformation of the secondary structure of proteins from α-helix to β-structure and random coil. The microstructure of shrimp surimi gel was improved by adding an appropriate amount of HA, becoming more uniform and denser. Among all samples with different levels of HA, shrimp surimi gel with the addition of 0.8% HA had the highest hardness, gumminess, chewiness, gel strength, storage modulus and the densest microstructure, and its water-holding capacity significantly improved when compared with that of the control group (P < 0.05). However, the textural characteristics, gel strength, water-holding capacity and storage modulus of shrimp surimi gel with 0.1% HA were lower than those of the control group, and the microstructure was looser.

To elucidate the influence of different concentrations of carrageenan (CA, 0.4%, 0.8%, 1.2%, 1.6%, 2.0%, w/w) on the gelation properties and structure of hemp protein isolate (HPI), with the hemp protein isolate without adding CA as the control, the water-holding capacity, texture, rheological properties of the composite gels were determined. Meanwhile, the effect of CA addition on the water distribution, protein structure and intermolecular forces in the composite gels was also investigated. The results showed that the addition of CA significantly (P

Chicken breast as the raw material was fully sheared and then the obtain minced meat was rested at 4 ℃ for different time (0~48 h). The thixotropy and rheological properties of the chicken minced meat was further analyzed, and the effect of resting time on the properties of the chicken minced meat gel was also investigated. The results showed that the chicken minced meat exhibited pseudoplasticity, thixotropy and weak gel properties (G'>G''), and the viscosity, thixotropy, elasticity (G') and viscosity (G'') of the chicken minced meat gradually increased with the increase of resting time. The cooking loss rate of the chicken minced meat gel significantly increased (P

ABSTRACT: This study aimed to investigate the effects of phosphorylated-ovalbumin (P-OVA) at different concentrations (0.5% and 1.0%) on the gel properties of pork myofibrillar protein (MP). The results showed that the textural properties such as gel hardness, cohesiveness, springiness and chewiness were improved with P-OVA addition at 0.5%. The water holding capacity (up to 75.89%) and gel strength (up to 168.56 g·mm) of MP gel were markedly increased after P-OVA addition. The absolute value of zeta potential reached 13.85 mV and maximum hydrophobicity (15.2 μg) resulted from the addition of 0.5% P-OVA. The storage modulus (G’) and loss modulus (G’’) of MP gel were significantly increased from 50°C, and the G’ and G’’ significantly increased after 1.0% P-OVA addition, evidencing that the cross-linking effect of MP protein gel was enhanced. In addition, the P-OVA addition improved the structure of MP gel protein by reducing the α-helix, while increasing the β-sheet and the r-value (the ratio between two ultraviolet second-derivative peak-to-trough distances), which further promoted the uniform and compact gel network structure. This work demonstrated that P-OVA is a highly effective modifier that significantly improves the quality of MP gel. From a view of practice, 0.5% P-OVA is the optimal addition amount.

BACKGROUND: Gel property is among the crucial functional properties of egg yolk (EY), which determines the texture and flavor of EY products. In the present study, the effects of two unsaturated fatty acids [monounsaturated fatty acid oleic acid (OA) and diunsaturated fatty acid linoleic acid (LA)] on the gel properties of EY protein were investigated. RESULTS: Compared with the blank group, the addition of LA and OA (10–50 g kg−1) improved the gel hardness (from 270.54 g to 385.85 g and 414.38 g, respectively) and viscosity coefficient (from 0.015 Pa.sn to 11.892 Pa.sn and 1.812 Pa.sn, respectively). The surface hydrophobicity of EY protein increased to a maximum value of 40 g kg−1 with the addition of both fatty acids (39.06 μg and 41.58 μg, respectively). However, excess unsaturated fatty acids (≥ 50 g kg−1) disrupted the completeness of the gel matrix and weakened the structural properties of the EY gel. CONCLUSION: Both fatty acids improved the gel properties of EY protein. At the same addition level, OA was superior to LA in improving gel properties. The present study provides a theoretical underpinning for the sensible application of unsaturated fatty acids in improving EY gel properties. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

BACKGROUND: Conventional cryoprotectant mixtures (sucrose and sorbitol) impart excessive sweetness and calories to surimi. Therefore, there is a need to explore alternative cryoprotectants with low sweetness and low‐calorie content. The cryoprotective effects and possible mechanisms of soybean oligosaccharides (SBOS) on the frozen stability of grass carp (Ctenopharyngodon idellus) surimi were investigated during 120 days of frozen storage in a comparison with commercial cryoprotectants (4% sucrose and 4% sorbitol, w/w). RESULTS: SBOS at 6–8% (w/w) and commercial cryoprotectants could restrain water mobility and reduce thawing loss of frozen surimi by increasing non‐freezable water content. SBOS could maintain the structural stability of proteins by preventing sulfhydryl groups from being rapidly oxidized to disulfide bonds, retarding the reduction of the solubility, Ca2+‐ATPase activity and α‐helix content of myofibrillar proteins (MP), as well as hindering the increasing surface hydrophobicity of MP of surimi during 120 days of frozen storage. The introduction of SBOS increased the gel strength and water‐holding capacity of frozen‐stored surimi. Compared with commercial cryoprotectants, 8% SBOS was more effective in stabilizing protein structure, whereas it was slightly less effective with respect to ice‐forming inhibition. CONCLUSION: The results obtained in the present study suggest that 8% SBOS could be potentially developed as a new cryoprotectant for surimi as a result of its ice‐forming inhibition abilities and protein structure stability. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To develop low-salt meat products and achieve the reduction in costs of meat production, the effect of konjac gum on the gel properties of soy protein isolate (SPI)-myofibrillar protein (MP) composite at various salt concentrations was investigated in this study. For the purpose of evaluating the effects of SPI, konjac gum, salt concentration, and other factors on MP gel formation, rheological properties and microstructures of the SPI-MP composite gels were analyzed using a rheometer and scanning electron microscopy. The obtained results indicated that at low salt concentration (0.3 mol/L NaCl), the gel strength of 3% MP-1% SPI composite gel significantly increased (P<0.05) to 97 g relative to 43 g of the 4% MP gel, and the water-holding capacity also increased from 36% to 50%. However, the gel strength and water-holding capacity were decreased when the replacement amount of SPI increased (2% MP-2% SPI composite) compared with 3% MP-1% SPI composite. The gel strength decreased from 177 g of 4% MP to 89 g of 2% MP-2% SPI composite with at 0.6 mol/L NaCl concentration. The gel strength and water holding capacity of the MP-SPI composite gel were increased after adding high amount of konjac gum. At 0.3 mol/L NaCl concentration, the gel strength of 2% MP-2% SPI composite increased from 66 g to 93 g after adding 1% konjac gum, and the water holding capacity also increased from 44% to 65%. Therefore, konjac gum can eliminate the disruption of SPI on the gel formation of MP. The results of scanning electron microscopy revealed that the strong water-holding capacity of konjac gum and the filling effect of SPI led to the increase in gel strength. Consequently, at the concentration of 0.3 mol/L salt, 0.5%~1% konjac gum could improve the characteristics of MP protein gel with low SPI substitution (1%). [ABSTRACT FROM AUTHOR]

To further develop a protein-polysaccharide composite fat replacer in low-fat meat products, this used pumpkin seed protein (PSP) and carrageenan to prepare a composite emulsion fat replacer, and added it to myofibrillar protein (MP) to form heat induced gel. The effects of the composite emulsion formed by PSP and carrageenan at various additive amounts on the properties of MP gels were investigated through the determination of gel moisture distribution, textural properties, microstructure, rheological properties, and other indexes. The results showed that when PSP and carrageenan composite emulsion was added at 50%, the water-holding properties and strength of the gel significantly improved (P<0.05), textural properties improved, and cooking loss and freeze-thaw stability significantly reduced (P<0.05). The rheological properties showed that the G' of the gel was always higher than the G". Therefore, a gel structure with elasticity and a denser and homogeneous microstructure was formed. Collectively, the gel properties of MP improved with the addition of 50% PSP and carrageenan composite emulsion. [ABSTRACT FROM AUTHOR]

The effects of the addition of curdlan gel with two different forms, thermal reversible curdlan gum (TRC) and thermal irreversible curdlan gum (TIRC) on the gelling properties and in vitro digestibility of myofibrillar proteins (MP) gel were investigated. The results showed that the gel strength and water holding capacity of MP gel significantly increased with increasing TRC or TIRC concentration (P<0.05), and reached the maximum value at 0.4%, which was confirmed by dynamic rheological behavior. Meanwhile, the addition of TRC or TIRC promoted the transformation of α-helix into β-sheet, and the hydrophobic interaction and disulfide bond were the primary forces of mixed gels. The microstructures revealed that the addition of TRC or TIRC promoted the formation of the dense and uniform protein network structure. However, the modes of interactions between TRC or TIRC and MP induced the different patterns for the gel formation, resulting in the differences in the microstructure of MP gels. In addition, the addition of TRC or TIRC inhibited protein hydrolysis into small peptides and amino acids, which significantly decreased in vitro protein digestibility (P<0.05). Especially when the supplemental level was 0.3% (w/w), the digestibility was reduced from 77.53% to 71.66%. However, no significant effect on the in vitro digestibility of MP gels was observed for each addition form of curdlan (P>0.05). Therefore, this study provides a theoretical basis for the effect of TRC or TIRC on the formation and in vitro digestion of MP gel, and lays a technical support for the application of curdlan gum in meat industry. [ABSTRACT FROM AUTHOR]

BACKGROUND: Potentilla anserina L. is rich in various nutrients, active ingredients and unique flavor, comprising a natural nutrition and health food. However, its application in aquatic food has been rarely reported. Therefore, the effects of Potentilla anserina L. powder (PAP) on gel properties and volatile flavor profile of silver carp surimi were investigated. RESULTS: The gel strength and water‐holding capacity of the surimi gels were significantly improved (P < 0.05), and the whiteness and cooking loss of all the samples decreased slightly with the increase in PAP content. The addition of PAP shortened the relaxation time (T2) of the surimi gels and converted some of the free water into immobile or bound water, which resulted in a better immobilization of water in the surimi. Scanning electron microscopy images demonstrated that the network of surimi gels with PAP added was denser and had a smoother surface compared to the control. Volatile components (VCs) analysis showed that 33 VCs were identified in the surimi gel samples with different additions of PAP, among which aldehydes, alcohols and esters were the major VCs, accounting for more than 50% of the VCs in the surimi gels. PAP addition reduced the fishy and rancid flavor compounds in surimi gels, such as 1‐propanol, 1‐octen‐3‐ol, etc., and promoted the production of aldehydes, alcohols, esters and other flavor substances. CONCLUSION: These results of the present study provide theoretical support for the investigation and development of new nutrient‐health‐flavored surimi products. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Copyright of Food & Machinery is the property of Food & Machinery Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Condiment is the property of China Condiment and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Condiment is the property of China Condiment and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The influence of epigallocatechin gallate (EGCG) on the physicochemical–rheological properties of silver carp surimi gel was investigated. The gel strength, texture, water-holding capacity (WHC), dynamic distribution of water, and rheological properties of surimi gels added with different levels (0, 0.02, 0.04, 0.06, 0.08, and 0.1%) of EGCG were measured. The results showed that with the increase of EGCG content, the gel strength, hardness, WHC, and immobilized water contents of surimi gels showed a trend of first increasing and then decreasing, and EGCG 0.02% and EGCG 0.04% showed better gel performance as compared with the control. EGCG 0.02% had the highest gel strength (406.62 g·cm), hardness (356.67 g), WHC (64.37%), and immobilized water contents (98.958%). The gel performance decreased significantly when the amounts of EGCG were higher than 0.06%. The viscosity, G′, and G″ of the rheological properties also showed the same trends. The chemical interaction of surimi gels, secondary structure of myofibrillar protein (MP), and molecular docking results of EGCG and silver carp myosin showed that EGCG mainly affected the structure and aggregation behavior of silver carp myosin through non-covalent interactions such as those of hydrogen bonds, hydrophobic interactions, and electrostatic interactions. The microstructures of EGCG 0.02% and EGCG 0.04% were compact and homogeneous, and had better gel formation ability. The lower concentrations of EGCG formed a large number of chemical interactions such as those of disulfide bonds and hydrophobic interactions inside the surimi gels by proper cross-linking with MP, and also increased the ordered β-sheet structure of MP, which facilitated the formation of the compact three-dimensional network gel. [ABSTRACT FROM AUTHOR]

The present work examined water bath (WB) heating with microwave heating (WM) under different levels of transglutaminase (TGase) additions in a low-salt Mandarin fish surimi to obtain excellent gel properties. The breaking force was gradually enhanced with increased TGase additions (0.0 - 0.8 U/g), while WM with 0.8 U/g TGase produced the maximum gel strength. In the texture analysis, WM depicted a reduced hardness and an increased springiness at the corresponding TGase additions than that of WB. In low-field nuclear magnetic resonance spectroscopy (LF-NMR) studies, TGase reduced water protons’ relaxation times to different extents, while WM increased their water-binding abilities, especially at 0.8 U/g. Fourier transform infrared spectroscopy (FT-IR) revealed that the relative contents of the secondary structures did not apparently change at 0.2 - 1.0 U/g. Therefore, using WM and adding 0.8 U/g TGase improved the gel quality of low-salt Mandarin fish surimi gel, providing a new strategy for preparing healthy surimi products. [ABSTRACT FROM AUTHOR]

Pectin is widely used in the food and pharmaceutical industries. However, data on sweet potato pectin extraction and structural property analyses are lacking. Here, for the high-value utilization of agricultural processing waste, sweet potato residue, a byproduct of sweet potato starch processing, was used as raw material. Ammonium oxalate, trisodium citrate, disodium hydrogen phosphate, hydrochloric acid and citric acid were used as extractants for the pectin constituents, among which ammonium oxalate had a high extraction rate of sweet potato pectin, low ash content and high molecular weight. Structural and gelation analyses were conducted on ammonium oxalate-extracted purified sweet potato pectin (AMOP). Analyses showed that AMOP is a rhamnogalacturonan-I-type pectin, with a molecular weight of 192.5 kg/mol. Chemical titration and infrared spectroscopy analysis confirmed that AMOP is a low-ester pectin, and scanning electron and atomic force microscopy demonstrated its linear molecular structure. Gelation studies have revealed that Ca2+ is the key factor for gel formation, and that sucrose significantly enhanced gel hardness. The highest AMOP gel hardness was observed at pH 4, with a Ca2+ concentration of 30 mg/g, pectin concentration of 2%, and sucrose concentration of 40%, reaching 128.87 g. These results provide a foundation for sweet potato pectin production and applications. [ABSTRACT FROM AUTHOR]

Citrus waste can be reused to promote the value-added of the citrus industry in recent years. Among them, free pectin can be developed to reduce the direct discharge of existing citrus waste for better ecological environments. This study aims to understand the differences in physical and chemical properties, structure, and function of different citrus pectins. The targeted application of pectin was also expanded to improve the added value of citrus by-products. Acid extraction was applied to extract the pectin from the peels of Shangrao pomelo, Gannan navel orange, Nanfeng honey tangerine, Japanese pomelo, small green citrus, and lemon, which were named HMP-1, HMP-2, HMP-3, HMP-4, HMP-5and HMP-6, respectively. A systematic analysis was made to explore the physical and chemical properties, structure, and gel properties of all six HMPs. There was basically a similar with the content of protein, ash, and various monosaccharides in the six HMPs. The results showed that all six HMPs were anionic polysaccharide and high ester pectin, where the esterification degrees ranged from 67.20% to 75.45%. There was a degraded degree during the extraction from the citrus processing by-products, in terms of the physicochemical properties and molecular structures. The molecular weight, viscosity, and molecular chain structure dominated the gel properties of pectins. The HMP-4 shared the largest molecular weight. All six HMPs formed the acid/sugar gels with high strength and intercepted water in a three-dimensional gel network. The better stability still remained after freezing and thawing cycles. The water holding capacity was above 96% in all six HMPs. HMP-1 and HMP-6 with the lower molecular weight shared the highest gel strength above 200°SAG. This was related to the high HG content and the complete molecular structure of HMP-1, as well as the higher RG-I content and branching degree of HMP-6. The weak gel strength of HMP-5 with the high molecular weight and viscosity was related to its molecular chain degradation and low RG-I content. While the HG contents of HMP-2, HMP-3, and HMP-4 were lower than those of HMP-1and HMP-6 and higher than that of HMP-5, where the gel strength was the same. The AFM images showed that the outstanding molecular chain cross-linking appeared in the HMP-1 and HMP-6. Shangrao pomelo and lemon peels were superior raw materials to extract the high methoxyl pectin. The peel pectin of Shangrao pomelo, Gannan navel orange, and lemon were suitable for the stronger gel systems, such as soft candy and jelly, while the peel pectin of Nanfeng honey tangerine, Japanese pomelo, and small green citrus were more suitable for the weaker gel systems (such as jam and yogurt), particularly for the foods that require both pectin and citrus fiber. In addition, the extremely high molecular weight of Japanese pomelo peel pectin was used as a dispersion stabilizer in protein milk beverages, in order to verify the dispersion stability and emulsifying performance. The physical and chemical properties, structure, and functional properties of different citrus pectins can provide a theoretical reference to determine the extraction materials with better gel properties, thus expanding the production and targeted application of pectins. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

BACKGROUND: The influences of deacetylated konjac glucomannan (DKGM) at different condition levels (0.0%, 0.5%, 1.0%, 1.5%, 2.0%) on the 3D printing feasibility, printing properties, and the final gel characteristics of minced pork were investigated. RESULTS: As the DKGM content increased, the printing accuracy and stability initially increased and then declined, and the printing stability and accuracy increased to their highest levels (98.16% and 98.85%) with a 1.5% addition of DKGM. Furthermore, the addition of DKGM significantly enhanced the texture of 3D‐printed meat after heat treatments. When the DKGM content reached 1.5%, the hardness and springiness were 1.19 and 1.06 times higher than those of the control group. The results of low‐field nuclear magnetic resonance and Raman spectra revealed that DKGM enhanced the amount of bound water in 3D‐printed meat and encouraged changes in protein structure. After the addition of DKGM at 1.5%, the contents of bound water and β‐sheets were 7.67% and 12.89% higher than those of the control group, respectively, facilitating the development of a better gel network of minced meat during heating. CONCLUSION: The results indicate that a concentration of 1.5% DKGM is the ideal setting for obtaining the desired rheological properties and textural characteristics (printability) of 3D‐printed minced meat products compared to other samples. In addition, the results showed that the addition of DKGM at 1.5% promotes the transition from α‐helix to β‐folding of proteins during heating, which facilitates the formation of gels. The results of the study contribute to the application potential of minced meat in the field of 3D food printing. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

This study explored the mechanism of l‐lysine intervention in wheat gluten protein (WG) gel formation under a microwave (MW) field. The results showed that the MW treatment had higher ζ‐potential values at the same heating rate. After adding l‐lysine, the solution conductivity and dielectric loss were significantly increased. Moreover, the WG gel strength enhanced 4.40% under the MW treatment. The Fourier spectra showed that the α‐helix content was decreased 13.78% with the addition of lysine. The ultraviolet absorption spectra and fluorescence spectra indicated that MW irradiation impacted the interactions between WG molecules more effectively than the water bath heating, promoting the denaturation and unfolding of the protein structure. In addition, scanning electron microscopy analysis showed that the incorporation of lysine promoted an ordered network structure formation of the protein, which enhanced the gel properties. This indicated that the zwitterion of l‐lysine played a regulatory role in the aggregation of proteins in the MW field. [ABSTRACT FROM AUTHOR]

Ohmic heating (OH) at different conditions (voltage: 15, 20, 25 V; frequency: 1, 5, 10 kHz) and one‐step water bath (WB) were used to heat wash and unwash surimi prepared from fresh pre‐rigor common carp. The optimal heating conditions were established through assessments of gel strength, Texture Profile Analysis (TPA), water‐holding capacity (WHC), whiteness, and sensory evaluation. Then, the impact of heating modes on gelation properties of unwashed surimi based on the optimal heating conditions was investigated. The study findings indicated a significant enhancement in gel properties compared to WB. Unwashed surimi gel properties showed improvement when derived from freshly caught raw fish and subjected to OH treatment. Moreover, variations in frequencies and voltages were observed to influence the heating rate. Optimal gel quality was achieved at 10 kHz 20 V (10 V/cm), facilitating swift progression through the gel deterioration stage, inhibition of protein hydrolyzing enzymes activity, and establishment of a stable gel network. Continuing to increase the heating rate would disrupt its network structure, resulting in diminished gel strength and WHC. The best quality of unwashed surimi gel was achieved by heating to 40°C for 30 min, followed by heating to 90°C for another 30 min (40°C 30 min + 90°C 30 min) under 10 kHz 20 V. The gel strength increased when held for 1 h at 40°C. For optimal heating efficiency, the heating mode of 40°C 30 min + 90°C 30 min is recommended to prepare unwashed surimi gel. Practical Application: Ohmic heating, as a rapid food heat treatment method, can both increase the heating rate and improve the gelation properties of freshwater surimi. There is a wide range of potential applications for the heat treatment of the surimi. [ABSTRACT FROM AUTHOR]