Search

Recognizing Mendelian causes is crucial in molecular diagnostics and counseling for patients with autism spectrum disorder (ASD). We explored facial dysmorphism and facial asymmetry in relation to genetic causes in ASD patients and studied the potential of objective facial phenotyping in discriminating between Mendelian and multifactorial ASD. In a cohort of 152 ASD patients, 3D facial images were used to calculate three metrics: a computational dysmorphism score, a computational asymmetry score, and an expert dysmorphism score. High scores for each of the three metrics were associated with Mendelian causes of ASD. The computational dysmorphism score showed a significant correlation with the average expert dysmorphism score. However, in some patients, different dysmorphism aspects were captured making the metrics potentially complementary. The computational dysmorphism and asymmetry scores both enhanced the individual expert dysmorphism scores in differentiating Mendelian from non‐Mendelian cases. Furthermore, the computational asymmetry score enhanced the average expert opinion in predicting a Mendelian cause. By design, our study does not allow to draw conclusions on the actual point‐of‐care use of 3D facial analysis. Nevertheless, 3D morphometric analysis is promising for developing clinical dysmorphology applications in diagnostics and training. [ABSTRACT FROM AUTHOR]

This paper examines the relationship between roll rotation of the jaws and changes in alar base or lip line asymmetry in the coronal plane following orthognathic correction. The study involved patients with preoperative frontal alar base and lip line asymmetries greater than 0.5° (because it corresponds to the minimum asymmetry perception threshold) and underwent bimaxillary orthognathic surgery without (Group I) or with (Group II) genioplasty. The alar base angle (ABA), lip line cant angle (LLCA), maxillary cant angle (MxCA), and mandibular cant angle (MnCA) were measured using preoperative and 12 months postoperative cone beam computed tomography (CBCT) images. Thirty-four patients were included in the study. Significant correlations were found between changes in MxCA and ABA besides between changes in MnCA and LCA in Groups I (P = 0.016, P ˂0.001, respectively) and II (P = 0.002, P ˂0.001, respectively). The mean of the change in ABA/the change in MxCA and the change in LLCA/the change in MnCA ratios for Group I were 0.59 ± 1.57 and 0.73 ± 0.94, respectively, while those for Group II were 0.46 ± 3.70 and 0.39 ± 2.00, respectively. Angular measurements from jugular and mental foramina points, aligned with the bony midline, offer a convenient tool for predicting alar base and lip symmetry during bimaxillary orthognathic surgery planning. [ABSTRACT FROM AUTHOR]

Objective: To investigate the highest opportunity skin puncture point and needle orientation according to facial asymmetry and classification. Methods: Computed tomography of 136 patients was analyzed. Horizontal and vertical angles and distances from the canthal-tragal line were investigated to determine the puncture point and needle's angle. Result: All patients' average points were 7.39 (±2.85) mm anterior to the tragus and 3.44 (±4.18) mm below the canthal-tragal line with an angle of 8.53 (±6.90)° anteriorly and 32.26 (±7.23)° superiorly. Regarding asymmetry, there was a statistical difference in horizontal angle, depth, and canthal-tragal distance between the deviated and non-deviated sides. Especially, vertical distances were 4.44 (±4.66) mm and 2.59 (±4.11) mm in the deviated and non-deviated sides, respectively (p < 0.001). Conclusion: In closed-mouth, the puncture point was closer to the tragus and lower than the conventional point. The point in the deviated side should be considered lower than the non-deviated side. [ABSTRACT FROM AUTHOR]

Orthognathic surgery primarily corrects skeletal anomalies and malocclusion to enhance facial aesthetics, aiming for an improved facial appearance. However, this traditional skeletal-driven approach may result in undesirable residual asymmetry. To address this issue, a soft tissue-driven planning methodology has been proposed. This technique estimates bone movements based on the envisioned optimal facial appearance, thereby enhancing surgical accuracy and effectiveness. This study investigates the initial implementation phase of the soft tissue-driven approach, simulating the patient's ideal appearance by realigning distorted facial landmarks to an ideal state. The algorithm employs symmetrization and weighted optimization strategies, aligning projected optimal landmarks with standard cephalometric values for both facial symmetry and form, which are essential in orthognathic surgery for facial aesthetics. It also incorporates regularization to preserve the patient's facial characteristics. Validation through retrospective analysis of preoperative patients and normal subjects demonstrates this method's efficacy in achieving facial symmetry, particularly in the lower face, and promoting a natural, harmonious contour. Adhering to soft tissue-driven principles, this novel approach shows promise in surpassing traditional methods, potentially leading to enhanced facial outcomes and patient satisfaction in orthognathic surgery. [ABSTRACT FROM AUTHOR]

The aim of this study was to assess the influence of surgical therapy, intraoperative evaluation, and immediate physiotherapy on the facial asymmetry of patients with congenital muscular torticollis (CMT). Patients who underwent a combination of unipolar sternocleidomastoid muscle release with perioperative physiotherapy between 2014 and 2020 in the Department of Oral and Maxillofacial Surgery, Radboud University Medical Center, Nijmegen were enrolled. Three-dimensional photographs of the face acquired 2 months preoperatively and 1.5–2 years postoperatively were assessed. Based on 43 patients, there was a significant improvement in the asymmetry indices (angles between bilateral exocanthion, bilateral cheilion, and nasion–gnathion lines): mean ± standard deviation reductions in indices (Ex–Ex)–(Ch–Ch), (Ex–Ex)–(Na–Gn), and (Ch–Ch)–(Na–Gn) of 0.88 ± 1.08° (P < 0.001), 1.04 ± 1.26° (P < 0.001), and 0.21 ± 1.06° (P = 0.024), respectively. Analysis of covariance (ANCOVA) showed that intervention at an early age (P = 0.017) and left-sided torticollis (P = 0.030) were associated with a significantly greater improvement in the facial asymmetry. This study found that the use of combined surgery and physiotherapy reduced the facial asymmetry of patients with CMT at 2 years postoperatively. Early intervention and left-sided torticollis were associated with a greater improvement in the facial asymmetry. This indicates that attention should be given to early intervention and right-sided CMT cases postoperatively. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to quantitatively evaluate morphological and volumetric changes in the masseter muscle using 3-dimensional analysis of facial asymmetry patients and to identify factors influencing these changes before and after orthognathic surgery. Methods: [Reviewer1 (2)]A single-center retrospective cohort study was conducted on twenty-two patients with deviation of the chin > 4 mm. Masseter muscle volume and morphology were measured at different periods during long-term follow-up (mean 15 ± 3.2 months). Factors related to changes in masseter muscle cross-sectional area and volume analyzed were also analyzed. Results: [Reviewer1 (2) and (9)]The volume and cross-sectional area of the masseter muscle on the non-deviated side reduced by 13.5% (P < 0.05) and 16.4% (P < 0.05), respectively, after orthognathic surgery. The length of the masseter muscle increased by 13.9% on the deviated side (P <.05) but decreased by 11.7% on the non-deviated side (P < 0.05). The width decreased on the deviated side from T1 to T2 (13.51 ± 2.09 mm vs. 12.04 ± 1.39 mm), but the non-deviated side showed an opposite tendency (10.81 ± 1.31 mm vs. 12.69 ± 2.37 mm). The difference in masseter muscle length and width between the two sides significantly reduced after surgery (P < 0.05). There was a noticeable decrease in the asymmetry in the muscle in proportion to the degree of the occlusal plane angle. Conclusion: Masseter muscle asymmetry exists in patients with facial asymmetry, but it could be improved with maxilla-mandible correction. Atrophy of the masseter muscle after orthognathic surgery was greater in patients with a large inclined occlusal plane angle due to improved dental compensation. Level of Evidence IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266. [ABSTRACT FROM AUTHOR]

Background: Relapses following orthognathic surgery have been reported to exceed 2% to 50%, depending on multiple factors. This study aimed to analyze the stability after orthognathic surgery in patients with mandibular ramus height asymmetry through 3D reconstruction using Cone-beam CT. Methods: This retrospective cohort study investigated patients who underwent mandibular setback surgery using bilateral sagittal split ramus osteotomy. Three-dimensional CT scans were taken at three different time points. Evaluation of the postoperative stability involved measuring changes in the x, y, and z axes as well as roll and yaw rotations of the mandible at specific landmarks (B point, mental foramen) on 3D CT scans obtained immediately after surgery and 6–12 months postoperatively. They were categorized into four groups based on bilateral mandibular height asymmetry through Asymmetry index (AI). The one-way ANOVA was implemented to compare the intergroup differences and Tukey's post hoc test was employed. Additionally, the Pearson correlation coefficient was also calculated. Results: A total of 24 patients were included in this study. The corresponding AI, representing the degree of asymmetry in both mandibles, were calculated as Group 1 was 1.25 ± 0.64%, Group 2 was 2.89 ± 0.47%, Group 3 was 5.03 ± 0.51%, and Group 4 was 9.40 ± 1.99%. The x-axis change in Group 4 was significantly larger at 1.71 mm compared to Group 1 at 0.64 mm. The mandibular roll, Group 4 showed a statistically significant increase at 1.33° compared to Group 1 at 0.35°. And there was a significant positive correlation observed between x-axis change and AI (p = 0.019), as well as between mandibular roll and AI (p = 0.025). Conclusion: After orthognathic surgery, stability was influenced by numerous factors, with the findings of this study suggesting that the degree of ramus height asymmetry in the mandible can be considered one contributing factor. [ABSTRACT FROM AUTHOR]

Objectives: To compare the facial asymmetry after bimaxillary surgery between mild craniofacial microsomia (CFM) and non-syndromic class II asymmetry. Materials and methods: Cone-beam computed tomography scans of adults with Pruzansky-Kaban types I and IIA CFM (CFM groups, n = 20), non-syndromic skeletal class II asymmetry (Class II group, n = 20), and normal controls (control group, n = 20) were compared. The area asymmetry of lower face and jaw bones was quantified. Landmark-based method was used to evaluate the lower facial asymmetry regarding midline, cants, and contour. Results: There were no significant postoperative differences in the hemi-facial and hemi-jaw area asymmetry between CFM and Class II groups, both of which were significantly larger than the control group. No significant difference was found in the midline deviation and lip and occlusal cants between CFM and Class II groups. The vertical contour asymmetry in CFM group became significantly larger than Class II group. Compared to the control group, the deviation of pronasale, subnasale, and soft-tissue menton, lip and occlusal cants, and sagittal and vertical contour asymmetry in CFM group were significantly larger, as were the deviation of subnasale and soft-tissue menton and vertical contour asymmetry in Class II group. Conclusions: The vertical contour asymmetry of mild CFM was significantly larger than non-CFM class II after surgery, while the area asymmetry, midline deviation, cants, and sagittal contour asymmetry of lower face showed no significant difference. Clinical relevance: Be aware that correcting vertical asymmetry of contour, lip, and dentition in CFM is still challenging. [ABSTRACT FROM AUTHOR]

the aim of this paper, is to propose a new reference line: the Frontozygomatic-Infraorbital Line (FZ-IOL). This reference line can guide the surgical team planning mandibular angle harmonization, based on the patient's skeletal proportion. The Frontozygomatic-Infraorbital Line has been adopted for symmetrization surgery, masculinization surgery, and in unsatisfactory results of previous orthognathic surgery. From March 2021 to December 2022, 3 patients were treated for severe facial asymmetry affecting mainly the lower third of the face. All cases were planned with the reference FZ-IOL. Patients were treated in the same center, at the Orthognathic Surgery Department of the Instituto Portugues da Face, Lisbon, Portugal. The Frontozygomatic-Infraorbital Line is designed virtually using software to reconstruct a 3D image from a digital imaging and communications in medicine (DICOM) file obtained from a cone beam computer tomography (CBCT). , connecting the two orbital rims. Then, a vertical line, the frontozygomatic line perpendicular to the IOL and passing through the outmost lateral portion of the frontozygomatic suture is drawn. The proposed line demonstrated how establishing appropriate reference lines is crucial for the success of the surgery. The selection of reference lines should be based on the patient's anatomy, the symmetrization process's complexity, and the surgery's desired outcome. The Frontozygomatic-Infraorbital Line represents an adequate reference line for managing mandibular angle lateral projection, improving lower third of the face symmetrization. [ABSTRACT FROM AUTHOR]

At present, stock linear distractors are used for internal maxillary distraction osteogenesis. However, the authors' research group has demonstrated, through an in silico analysis, that linear distraction leads to bone deformities and malocclusion, whereas helical distraction can yield ideal outcomes. A system for designing and manufacturing custom helical distractors has recently been developed, and the feasibility of these appliances now needs to be assessed. This study was, therefore, conducted to gain an initial insight into their feasibility. The study had two goals. First, it aimed to demonstrate, in an in vitro model, that the novel system of custom helical distraction can produce appropriate clinical outcomes. The second aim was to compare the performance of custom helical distractors with that of stock devices and hybrid devices (i.e., linear appliances that feature patient-specific footplates). Interpreting the results as trends, this study showed that the system of custom helical distraction resulted in in vitro outcomes that were superior to those obtained with stock and hybrid devices. [ABSTRACT FROM AUTHOR]

Immediate lengthening temporalis myoplasty (Labbé procedure) for immediate dynamic facial reanimation after nerve-inclusive parotidectomy in the elderly population is undocumented in the literature. The aim of this work was to determine whether the Labbé approach could achieve immediate, good functional and static results in elderly patients with acquired facial palsy. A retrospective analysis of five patients with parotid malignancies involving the facial nerve who underwent parotidectomy and an immediate Labbé procedure was performed. The House–Brackmann and Sunnybrook scores for facial palsy were used as objective measurements of the functional outcome. All patients underwent total parotidectomy, neck dissection, Labbé procedure, immediate temporary tarsorrhaphy, brow lift, and postoperative radiotherapy. Mean patient age was 83 (range 73–87) years. The average resected tumour size was 3.54 cm. The mean duration of surgery was 324 min and length of hospital stay 4 days. All patients experienced an improvement in House–Brackmann of one grade postoperative (grade V to IV in four, grade VI to V in one); the Sunnybrook score improved by 31 points on average (mean preoperative 3.8 vs postoperative 34.8). An immediate Labbé procedure following ablative parotid malignancy resection is a reliable and safe reconstructive procedure in a carefully selected elderly population, providing acceptable immediate static and dynamic hemifacial mimetic function and eliminating an additional facial palsy correction procedure. [ABSTRACT FROM AUTHOR]

Resumen: Introducción: La lipoatrofia facial carece de criterios clínicos estándar para su diagnóstico y tratamiento; sin embargo, los pacientes con atrofia hemifacial aumentan afectando la salud mental de los pacientes que la padecen. El lipoinjerto se ha rescatado como una opción de tratamiento eficaz y seguro. Objetivo: Mostrar los resultados de la restauración volumétrica autóloga en pacientes con hemiatrofia adiposa facial. Método: Estudio multicéntrico, descriptivo, longitudinal y prospectivo realizado en 29 pacientes atendidos en el Hospital Hermanos Ameijeiras, Cuba y en la clínica EIMEC, España en el período julio 2018 a julio 2023. Se incluyeron ambos sexos, entre 19 y 75 años, con asimetría facial por disminución unilateral del tejido celular subcutáneo. Resultados: La edad media fue 47,9 años. Predominaron las mujeres con 79,3%. Predominaron la etiología idiopática, autoinmune y trauma orbitario con 17,2% cada uno. Según el grado de severidad fue mayor el grado II con 65,5%, el grado III representó el 34,5% del total. Respecto a la cantidad de tejido adiposo injertado en 62,1% fue de 31 a 60 ml y en 27,6% mayor de 60 ml. Según el número de aplicaciones del injerto el 72,4% requirió una y el 27,6% dos aplicaciones. El 93,1% no presentaron complicaciones y el 6,9% refirieron reabsorción del 50% del injerto. El 100% los pacientes refirió satisfacción con el procedimiento y los resultados fueron evaluados como buenos; al presentar mejoría, ausencia de complicaciones y satisfacción del paciente, en el 86,21%. Conclusión: La lipotransferencia autóloga asistida con células madre del tejido adiposo constituye una opción de tratamiento seguro que ofrece buenos resultados en la corrección de la asimetría causada por lipoatrofia hemifacial. Abstract: Introduction: Facial lipoatrophy lacks standard clinical criteria for its diagnosis and treatment; however, patients with hemifacial atrophy increase, affecting the mental health of patients who suffer from it. Lipografting has been rescued as an effective and safe treatment option. Objective: To show the results of autologous volumetric restoration in patients with facial adipose hemiatrophy. Method: Multicenter, descriptive, longitudinal and prospective study carried out on 29 patients treated at the Hermanos Ameijeiras Hospital, Cuba and the EIMEC clinic, Spain in the period from July 2018 to July 2023. Both sexes were included, between 19 and 75 years old, with facial asymmetry due to unilateral decrease in subcutaneous cellular tissue. Results: The average age was 47.9 years. Women predominated with 79.3%. The most common etiologies were idiopathic, autoimmune and orbital trauma, each accounting for 17.2%. According to the degree of severity, grade II was the highest, with 65.5%, and grade III represented 34.5% of the total. Regarding the amount of grafted adipose tissue, 62.1% of the cases were 31 to 60 ml, and 27.6% more than 60 ml. According to the number of graft applications, 72.4% required one and 27.6% two applications. 93.1% had no complications and 6.9% reported 50% reabsorption of the graft. Patient satisfaction reached 100% and the results were classified as good in 86.21%; when there was improvement, without complications as well as patient satisfaction. Conclusion: Autologous lipotransfer assisted with adipose tissue stem cells is a safe treatment option that offers good results in correcting asymmetry caused by hemifacial lipoatrophy.

With the growing demand for facial aesthetics, facial asymmetry has emerged as a prominent clinical concern. Skeletal Class Ⅲ malocclusion could not only affect facial aesthetics, but also have an adverse effect on oral function. Facial asymmetry is caused by complex factors and can manifest in various ways, including morphological asymmetry of the maxillofacial unit, positional asymmetry of maxillofacial units, and transverse dentition compensation. Therefore, comprehensive classification based on maxillofacial features of facial asymmetry is crucial for diagnosis, treatment, and surgical planning. This article aims to review recent progress of research on the maxillofacial features, classification, and treatment of skeletal Class Ⅲ malocclusion with facial asymmetry, in order to provide reference for clinical diagnosis and treatment.

Patients often report to the dental hospital with a complaint of toothache with extraoral swelling. Worried patients visit the dentist with a lot of apprehension. Acute dental infections with intraoral and extraoral swellings can be emergency and challenging to manage. Reduced mouth opening and severe pain may not allow the dentist to create an orthograde access to root canals. It ensues when the bacteria spread from the dental pulp to the surrounding periapical tissues accompanied by the formation of pus. If left untreated, these infections can be excruciatingly painful and pose a severe risk of spreading to facial spaces and finally, they may propagate to deep neck areas a ascend to intracranial sinuses. Hence, knowledge of its clinical management is of utmost importance. An acute periapical abscess has to be accurately diagnosed to render proper management of these maladies. Treating dentists should have a basic understanding of the pathophysiology, the suitable usage of antibiotics, the medical history of the patient, and standard treatment protocols. Therefore, this case report describes the management of an acute periapical abscess which was an emergency, and its conservative management.

Abstract Background Relapses following orthognathic surgery have been reported to exceed 2% to 50%, depending on multiple factors. This study aimed to analyze the stability after orthognathic surgery in patients with mandibular ramus height asymmetry through 3D reconstruction using Cone-beam CT. Methods This retrospective cohort study investigated patients who underwent mandibular setback surgery using bilateral sagittal split ramus osteotomy. Three-dimensional CT scans were taken at three different time points. Evaluation of the postoperative stability involved measuring changes in the x, y, and z axes as well as roll and yaw rotations of the mandible at specific landmarks (B point, mental foramen) on 3D CT scans obtained immediately after surgery and 6–12 months postoperatively. They were categorized into four groups based on bilateral mandibular height asymmetry through Asymmetry index (AI). The one-way ANOVA was implemented to compare the intergroup differences and Tukey's post hoc test was employed. Additionally, the Pearson correlation coefficient was also calculated. Results A total of 24 patients were included in this study. The corresponding AI, representing the degree of asymmetry in both mandibles, were calculated as Group 1 was 1.25 ± 0.64%, Group 2 was 2.89 ± 0.47%, Group 3 was 5.03 ± 0.51%, and Group 4 was 9.40 ± 1.99%. The x-axis change in Group 4 was significantly larger at 1.71 mm compared to Group 1 at 0.64 mm. The mandibular roll, Group 4 showed a statistically significant increase at 1.33° compared to Group 1 at 0.35°. And there was a significant positive correlation observed between x-axis change and AI (p = 0.019), as well as between mandibular roll and AI (p = 0.025). Conclusion After orthognathic surgery, stability was influenced by numerous factors, with the findings of this study suggesting that the degree of ramus height asymmetry in the mandible can be considered one contributing factor.

A spectrum of surgical management for temporomandibular joint (TMJ) ankylosis exists ranging from gap arthroplasty to total joint replacement. Reconstruction and rehabilitation of the ramus-condyle unit (RCU) remains a surgical challenge in TMJ ankylosis. Distraction osteogenesis (DO) is a promising technique for joint reconstruction over conventional methods. This review compared the clinically relevant outcomes of transport distraction osteogenesis (TDO) and costochondral graft (CCG) for joint reconstruction in TMJ ankylosis. PubMed, Medline, Embase, CENTRAL and ScienceDirect databases were searched from inception till 30th September 2023. Randomized controlled trials (RCTs) and prospective, retrospective studies on TMJ ankylosis patients comparing TDO and CCG for joint reconstruction and reporting outcomes were included. Assessment of the risk of bias was done with the Cochrane Collaboration tool. Five studies were included in the review. A significant improvement in the postoperative mouth opening with both groups was reported on follow-up and the analysis favored TDO for the joint reconstruction (p = 0.003). TDO group reported up to 6.1 % lower incidence of postoperative reankylosis in comparison to CCG (p = 0.59). Data was insufficient with regard to facial asymmetry, chin deviation and malocclusion. TDO is a better alternative to CCG for joint reconstruction. Due to paucity of the reported literature and unequal sample distribution between the groups, quality evidence could not be derived regarding long-term stability. Further RCTs are recommended to generate better evidence and evaluate clinically relevant outcomes. [Display omitted] [ABSTRACT FROM AUTHOR]

The accurate determination of the nasal tip's spatial location is crucial for achieving symmetry in rhinoplasty. Even minor deviations can result in asymmetrical lengths and configurations of the nostrils. Our approach centers on defining the nasal tip position by establishing the midline of the nasal base and projecting an isosceles triangle. This triangle, with the tip as the vertex and alar creases as angles, ensures symmetric sidewalls. The symmetry axis, derived from the isosceles triangle, guides the placement of the tip sidewalls and columella. To implement this, we use anatomical benchmarks such as the implantation of the nasal base and position of the alar creases, considering inherent facial asymmetries. We introduce a laser gadget as an auxiliary tool, projecting perpendicular lines to guide precise midline alignment. Marking specific points, including interbrow midpoint and alar creases, ensures accuracy. In the past 12 months, we applied this methodology in 247 rhinoplasty cases, observing improved outcomes and patient satisfaction. Our proposal of utilizing isosceles triangles provides a streamlined approach to achieving symmetry. The laser device, while beneficial, should be viewed as supportive rather than an absolute guiding measure. [ABSTRACT FROM AUTHOR]

Objective To investigate the clinical efficacy of disc repositioning surgery combined with orthodontic treatment in patients with temporomandibular disorder and facial asymmetry. Methods One patient who underwent disc repositioning surgery combined with orthodontic treatment for temporomandibular joint disorder and facial asymmetry was reported. Preoperatively, the patient had a skewed shape of the opening, mild pressure pain in the right preauricular region with left mandibular deviation, and a mismatch between the width of the upper and lower dental arches. In the arthrosurgery department, bilateral temporomandibular disc replacement and anchorage were performed through a transauricular incision, and an auxiliary splint was worn to stabilize the jaw position for 6 months. In the orthopedic department, maxillary skeletal expansion was used in combination with the multiloop edgewise archwire technique to reconstruct the occlusion after 16 months of orthodontic treatment. Results The deviation was corrected by wearing an occlusal splint for six months after joint repositioning and anchoring; moreover, the pain symptoms disappeared, and the cone beam CT examination showed that the bilateral temporomandibular joint space was uniformly enlarged, the lower alveolar ridge midline deviated to the right, the posterior regions of the teeth were bilaterally inverted, and the anterior region and the posterior region of the left side were open. The orthodontic treatment matched the width of the upper and lower dental arches and established the cuspal molar neutrality relationship and the normal overjet coverage of the anterior teeth; additionally, the mandibular position was not obviously skewed. A review of the results of the related literature shows that abnormal occlusal relationships, such as mismatched arch width and skewed occlusal plane, can cause adaptive mandibular deviation, which can lead to the occurrence of TMD. Temporomandibular joint disc anchorage with splint treatment can effectively improve maxillofacial deformity in young TMD patients. After the establishment of a stable, physiologically functional disc-condylar relationship, orthodontic treatment is required to remove the interfering factors to rebuild the occlusion, and long-term postoperative review and follow-up are needed. Conclusion In patients with TMD and mandibular accommodative deviation due to occlusal anomalies, establishing a normal disc-condylar relationship and eliminating occlusal interference through disc repositioning surgery combined with orthodontic treatment can effectively improve facial shape and establish a stable jaw position.

Abstract Background This study was conceived to assess the postoperative stability of condylar position following fixation with miniplates and lag screws after bilateral sagittal split osteotomy (BSSO). Methods This retrospective study included a cohort of 20 patients undergoing BSSO using the Obwegeser-Dal Pont modification. The bony segments were stabilized using either miniplates with two 2.0-mm monocortical screws per segment or three 2.0-mm bicortical lag screws along the mandible’s superior border. Pre- and postoperative (7-day interval) spiral computed tomography scans were conducted to assess skeletal changes across both groups. Data analysis employed Wilcoxon signed-rank and Wilcoxon rank-sum tests (α = 0.05). Results No statistically significant difference was observed between the pre-and postoperative condylar position parameters (P>0.05). However, the lag screw group showed a marginal significant increase in the left condyle’s angulation (preoperative: 24.83 ± 6.37 vs. postoperative: 32.5 ± 4.93; P = 0.04). Changes in condylar height, length, and width were not statistically significant before and after BSSO in either groups (P>0.05). Nor was any statistically significant difference found between the miniplates and lag screws groups regarding condylar position parameters (P>0.05). Conclusion The results indicated that both lag screw and miniplate fixation methods can be effectively employed in BSSO procedures without impacting condylar position parameters. Thus, either fixation method can be chosen depending on factors such as the surgeon’s preference and clinical outcomes.

Parry-Romberg syndrome (PRS) is a rare neurocutaneous and craniofacial disorder characterized by progressive hemifacial wasting and atrophy that predominantly affects children and young adults, with an estimated prevalence of 1 in 700,000 individuals. Despite its rarity, PRS poses significant challenges for patients, their families, and healthcare providers due to its unpredictable course and potential functional and aesthetic impairments. The main aim is to provide a comprehensive overview of PRS, encompassing its clinical features, pathogenesis, and management techniques. We present a case of PRS in a 9-year-old female with pronounced facial asymmetry, with marked wasting and atrophy involving the entire right side of the face. CT scan revealed right sided hypoplasia of maxilla, mandible, and zygomatic arch with enophthalmos of right eye. MRI showed right temporalis, medial and lateral pterygoid, masseter, risorius, buccinator, zygomaticus major and minor, levator labii superioris, levatorangulioris and orbicularis oris muscles atrophy. The clinical presentation of PRS typically involves progressive facial atrophy, predominantly affecting the subcutaneous tissues, muscles and bones. Patients may experience various symptoms as the condition advances, including facial asymmetry, hemifacial pain, dental and ocular abnormalities and neurological manifestations. The exact etiology of PRS remains unknown, although autoimmune, genetic and vascular factors are likely contributors. Treatment of PRS needs a multidisciplinary approach involving dermatologists, plastic surgeons, neurologists, ophthalmologists, and dental specialists. Treatment options aim to alleviate symptoms, improve function and address cosmetic concerns. Surgical interventions such as autologous fat grafting, facial reconstructive procedures and orthognathic surgery have restored facial symmetry and function. Additionally, nonsurgical modalities, including botulinum toxin injections, prosthetic devices and dental interventions, may offer symptomatic relief and enhance overall quality of life.

Copyright of Journal of Prevention & Treatment For Stomatological Diseases is the property of Journal of Prevention & Treatment For Stomatological Diseases Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To determine if there are differences in condylar volume, glenoid cavity and joint space between patients diagnosed with facial asymmetry (FA), between affected and contralateral sides and with respect to subjects without FA. Cross-sectional, retrospective study comparing CT/CBCT images from patients with FA diagnosis referred to a private clinic, versus a control group, age and sex matched, of patients requiring orthodontic treatment without FA. The 3D Slicer software was used for the analysis. Bivariate analysis was performed to compare qualitative variables using Chi-square or Fisher tests, and for normal distribution quantitative variables, the t-student test was used. The level of significance was p < 0.05. The FA group (n = 138) included: Hemimandibular Elongation (HE) (n = 64), Hemimandibular Hyperplasia (HH) (n = 12), Hybrid Form (HF) (n = 20), Asymmetric Mandibular Prognathism (AMP) (n = 25), Glenoid Cavity Asymmetry (GCA) (n = 9) and Functional Laterognathism (FL) (n = 8). The control group (n = 20) had no FA and no signs or symptoms of temporomandibular dysfunction. The right condylar and glenoid cavity volumes were significantly larger in FA cases. The volumes of the right and left joint space had significant differences only in HE patients. Condylar volumes are higher in almost all FA subgroups compared to matched controls. The glenoid cavity volume is larger in FA patients, except for the GCA right and FL left sides. Regarding articular spaces, HE was the only entity with less volume on the contralateral side. The evaluation of structural volume by 3D-CT images helps to diagnose and differentiate FA subgroups. [ABSTRACT FROM AUTHOR]

Background: This study was conceived to assess the postoperative stability of condylar position following fixation with miniplates and lag screws after bilateral sagittal split osteotomy (BSSO). Methods: This retrospective study included a cohort of 20 patients undergoing BSSO using the Obwegeser-Dal Pont modification. The bony segments were stabilized using either miniplates with two 2.0-mm monocortical screws per segment or three 2.0-mm bicortical lag screws along the mandible's superior border. Pre- and postoperative (7-day interval) spiral computed tomography scans were conducted to assess skeletal changes across both groups. Data analysis employed Wilcoxon signed-rank and Wilcoxon rank-sum tests (α = 0.05). Results: No statistically significant difference was observed between the pre-and postoperative condylar position parameters (P>0.05). However, the lag screw group showed a marginal significant increase in the left condyle's angulation (preoperative: 24.83 ± 6.37 vs. postoperative: 32.5 ± 4.93; P = 0.04). Changes in condylar height, length, and width were not statistically significant before and after BSSO in either groups (P>0.05). Nor was any statistically significant difference found between the miniplates and lag screws groups regarding condylar position parameters (P>0.05). Conclusion: The results indicated that both lag screw and miniplate fixation methods can be effectively employed in BSSO procedures without impacting condylar position parameters. Thus, either fixation method can be chosen depending on factors such as the surgeon's preference and clinical outcomes. [ABSTRACT FROM AUTHOR]

Objectives: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. Materials and methods: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. Results: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. Conclusions: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. Clinical relevance: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction. [ABSTRACT FROM AUTHOR]

Background: The skin & SMAS layer remodeling technique (SSRT) represents a significant advancement in facial aesthetic treatments. Traditional methods primarily address wrinkles and volume loss, whereas SSRT focuses on achieving both volume and natural lifting effects through strategic filler injections. This technique emphasizes the anatomical and dynamic properties of facial tissues, particularly the SMAS, to enhance facial symmetry and contours while maintaining natural movement. Materials and Methods: SSRT employs a combination of firm and soft hyaluronic acid fillers to sculpt a youthful, dynamic appearance, simulating the natural lift of a smiling expression. This study explores the effects of gravity on facial tissues and uses advanced imaging techniques to corroborate the shifting of tissues. The technique is compared with other recognized methods, such as true lift and myomodulation, to evaluate its effectiveness in balancing volume enhancement and dynamic facial expressions. Results: The results indicate that SSRT uniquely balances volume enhancement and dynamic facial expressions, achieving a visibly lifted but natural appearance. The use of advanced imaging techniques substantiates SSRT's effectiveness by showing the shifting of tissues. SSRT reduces the risks associated with excessive filler use and aligns with contemporary aesthetic preferences. Conclusion: SSRT offers a novel approach by mimicking the facial lift observed when lying down, providing insights into potential transformative "lifts" when upright. By strategically combining firm and soft hyaluronic acid fillers, SSRT achieves a balance of volume and lift, enhancing facial symmetry and maintaining natural movement. This technique represents a significant advancement in facial aesthetic treatments, offering a natural and dynamic alternative to traditional methods. [ABSTRACT FROM AUTHOR]

The contemporary significance of celebrities' facial aesthetics underscores their heightened importance in shaping attractiveness standards. This retrospective study aimed to investigate the impact of patterns on aesthetic canons in the profile views of female celebrities, using artificial intelligence. The study sought to compare different races and propose standards for attractive faces. In this retrospective cohort study, a Python-based algorithm was used to analyze frontal patterns and evaluate their influence on aesthetic norms in publicly accessible images of female global celebrities. Ten ideal angular or proportional measures were gathered from the literature, and were trained to serve as a benchmark for the analysis of facial attractiveness. Demographic characteristics were described statistically. A one-way ANOVA test was employed to assess data distribution. Differences in means between groups were evaluated using nonparametric independent-sample tests, with statistical significance set at < 0.05. The study involved facial analyses for 115 female celebrities. It revealed variations in facial features among races. The mean golden ratio differed, with African and Asian individuals showing lower ratios. Symmetry varied, with Latin and Caucasian faces considered the most symmetrical. The zygomatic-to-mandibular width ratio was similar across races, with a ratio close to 80% being associated with more attractive faces. Differences in nose-to-mouth ratio, lips, alar base width, and chin angle were noted among race groups. The study concluded that, regardless of race, an attractive female face is characterized by specific ratios and angles. Facial symmetry, though desirable, is not strictly necessary. Irrespective of race background, an appealing female face is characterized by a zygomatic-to-mandibular width ratio nearing 80%, a mid-facial third that is slightly larger than the lower third, and a distinctive chin angle of approximately 138°, contributing to a trapezoidal facial shape. The findings contribute valuable insights into attractiveness standards and the impact of frontal patterns on aesthetic canons in female celebrities. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to find out how the preferred chewing side (PCS) affects facial asymmetry, what kind of factors affect PCS, and whether there are differences in facial asymmetry between symmetrical and asymmetrical masticators. Material and Methods: The study included 748 subjects (females n=452, males n=296) born in 1985–1986 in Northern Finland (Northern Finland Birth Cohort 1986, NFBC 1986). Subjects’ faces were captured in facial 3D images with stereophotogrammetry technology, and they filled in a questionnaire concerning oral health. A comprehensive dental examination was done by a dentist. Subject´s chewing side preference was studied by chewing a piece of paraffin, cotton roll or parafilm. Asymmetry was measured from 3D images with different asymmetry measurements and facial landmarks. Results: Reduced number of teeth on contralateral side affects PCS (OR = 2.44 in the case of one tooth is missing). Being female increased the whole face and lower face symmetry (p values

Abstract Background We aimed to establish a novel method for automatically constructing three-dimensional (3D) median sagittal plane (MSP) for mandibular deviation patients, which can increase the efficiency of aesthetic evaluating treatment progress. We developed a Euclidean weighted Procrustes analysis (EWPA) algorithm for extracting 3D facial MSP based on the Euclidean distance matrix analysis, automatically assigning weight to facial anatomical landmarks. Methods Forty patients with mandibular deviation were recruited, and the Procrustes analysis (PA) algorithm based on the original mirror alignment and EWPA algorithm developed in this study were used to construct the MSP of each facial model of the patient as experimental groups 1 and 2, respectively. The expert-defined regional iterative closest point algorithm was used to construct the MSP as the reference group. The angle errors of the two experimental groups were compared to those of the reference group to evaluate their clinical suitability. Results The angle errors of the MSP constructed by the two EWPA and PA algorithms for the 40 patients were 1.39 ± 0.85°, 1.39 ± 0.78°, and 1.91 ± 0.80°, respectively. The two EWPA algorithms performed best in patients with moderate facial asymmetry, and in patients with severe facial asymmetry, the angle error was below 2°, which was a significant improvement over the PA algorithm. Conclusions The clinical application of the EWPA algorithm based on 3D facial morphological analysis for constructing a 3D facial MSP for patients with mandibular deviated facial asymmetry deformity showed a significant improvement over the conventional PA algorithm and achieved the effect of a dental clinical expert-level diagnostic strategy.

Abstract Background Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). Methods In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. Results For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. Conclusion Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

Background: We aimed to establish a novel method for automatically constructing three-dimensional (3D) median sagittal plane (MSP) for mandibular deviation patients, which can increase the efficiency of aesthetic evaluating treatment progress. We developed a Euclidean weighted Procrustes analysis (EWPA) algorithm for extracting 3D facial MSP based on the Euclidean distance matrix analysis, automatically assigning weight to facial anatomical landmarks. Methods: Forty patients with mandibular deviation were recruited, and the Procrustes analysis (PA) algorithm based on the original mirror alignment and EWPA algorithm developed in this study were used to construct the MSP of each facial model of the patient as experimental groups 1 and 2, respectively. The expert-defined regional iterative closest point algorithm was used to construct the MSP as the reference group. The angle errors of the two experimental groups were compared to those of the reference group to evaluate their clinical suitability. Results: The angle errors of the MSP constructed by the two EWPA and PA algorithms for the 40 patients were 1.39 ± 0.85°, 1.39 ± 0.78°, and 1.91 ± 0.80°, respectively. The two EWPA algorithms performed best in patients with moderate facial asymmetry, and in patients with severe facial asymmetry, the angle error was below 2°, which was a significant improvement over the PA algorithm. Conclusions: The clinical application of the EWPA algorithm based on 3D facial morphological analysis for constructing a 3D facial MSP for patients with mandibular deviated facial asymmetry deformity showed a significant improvement over the conventional PA algorithm and achieved the effect of a dental clinical expert-level diagnostic strategy. [ABSTRACT FROM AUTHOR]

Objective: Patients with a cleft require structured procedures to achieve feasible treatment results. Since many treatment protocols coexist without being superior to one another, this study investigated the Saarland University Hospital treatment concept for patients with unilateral and bilateral clefts to evaluate its effects upon dental arch dimensions until the early mixed dentition. Material and methods: Digitized plaster models were used for data collection. Records of 83 patients (Cleft n = 41 [UCLP n = 28, BCLP n = 13], Non-Cleft Control n = 42) comprised 249 casts. The evaluation included established procedures for measurements of edentulous and dentate jaws. Statistics included Shapiro–Wilk, Friedmann, Wilcoxon and Mann–Whitney-U-Tests for the casts. The level of significance was set at p < 0.05. Results: The cast analysis showed an approximation of arch dimensions towards those of age-matched patients without a cleft until early mixed dentition. The mean values of patients with and without cleft lip and palate were almost indistinguishable when compared in primary and/or early mixed dentition. Conclusions: The evaluated treatment concept leads to feasible outcomes regarding dental arches in patients with unilateral and bilateral clefts compared to an age-matched non-cleft control. Clinical relevance: The evaluated treatment concept leads to favorable outcomes until early mixed dentition. [ABSTRACT FROM AUTHOR]

Purpose The aim of this study was to determine the relationship between the zygomaticomaxillary complex (ZMC) and infraorbital foramen region (IFR) with facial symmetry in patients with unilateral cleft lip and palate (UCLP) using cone beam computed tomography (CBCT). Materials and Methods In this retrospective study, CBCT images of 30 non-syndromic UCLP patients were included, along with 30 age- and sex-matched control individuals. ZMC symmetry was evaluated in the axial section by comparing the right and left sides. Similarly, symmetry in the IFR was assessed in the coronal section. The significance level was set at p<0.05 for statistical analysis. Results The study group comprised 12 female and 18 male patients, with ages ranging from 10 to 18 years (mean age 14.1 years). Both ZMC and IFR measurements were significantly lower on the cleft sides of the study group compared to both the noncleft sides of UCLP patients and the control group (p<0.001, p=0.022, and p=0.036, respectively). Furthermore, IFR measurements were significantly lower in the control group compared to the non-cleft sides of the study group (p=0.04). Conclusion This study demonstrated that individuals with UCLP exhibit asymmetry in both the ZMC and the IFR. These findings suggest a negative impact on facial aesthetics. [ABSTRACT FROM AUTHOR]

Copyright of Anatolian Clinic Journal of Medical Sciences is the property of Hayat Saglik ve Sosyal Hizmetler Vakfi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry. Materials and methods: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively. Results: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be ‘low’. The level of evidence was determined to be ‘low’ for the effectiveness of the technique and ‘moderate’ for the ease of clinical applicability. Conclusion: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required. Clinical relevance: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes. [ABSTRACT FROM AUTHOR]

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle. [ABSTRACT FROM AUTHOR]

Copyright of Revue d'Orthopédie Dento-Faciale is the property of Parresia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). Methods: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. Results: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. Conclusion: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG. [ABSTRACT FROM AUTHOR]

Significant facial asymmetry can lead to both functional and aesthetic issues. Often, such asymmetry originates from irregularities in the jaw structure. It is critical to recognize that asymmetries can be concealed by soft tissue, which may be overlooked. The aim of this study is to investigate the relationships between bilateral landmarks in the vertical dimension of facial asymmetry among individuals with skeletal Class II and Class III malocclusions. Fifty-two adult patients with a mean age of 24.4 ± 3.79 years with facial asymmetry who underwent orthodontic and orthognathic surgery were studied. Cone-beam computed tomography and facial scans were used to create 3D virtual head models which enhanced the accuracy in addressing facial asymmetry to ensure effective treatment planning. Each landmark was measured and digitized using the Dolphin Imaging program. The findings showed a correlation between gender and type of skeletal discrepancies with the menton deviation direction. In conclusion, the vertical discrepancy between bilateral landmarks was observable in both hard and soft tissues with more pronounced expression in soft tissues. This discrepancy was characterized by an elevation on the same side as the menton deviation, which was a feature observed in both skeletal Class II and Class III individuals. [ABSTRACT FROM AUTHOR]