Search

This study compares the logistics of decommissioning wind turbine blades for energy recovery in a cement kiln (proposed scenario) to industrial landfill site disposal and coke fuel in a cement kiln combined (base scenario) to check the financial cost of the operation in each scenario. The wind farm coordinates, wind turbine blade mass, and logistics costs of the 760 wind farms in Northeast Brazil were used to determine the location of a material processing center (MPC) for wind turbine blade waste. The findings showed that the cost of the proposed scenario was higher than that of the base scenario when a single MPC was considered to serve the Northeast region. However, the proposed scenario was preferable when installing decentralized MPCs to serve the Northeast region. The installation of four additional decentralized MPCs shows that energy recovery is a more favorable technological route in the economic performance for disposing of 96% of the wind turbine blades in operation in the Northeast region, which represents 210,188 tonnes. Therefore, the gradual implementation of MPCs should consider a wind turbine blade decommissioning plan to support the energy recovery potential. [ABSTRACT FROM AUTHOR]

Copyright of Environmental & Social Management Journal / Revista de Gestão Social e Ambiental is the property of Environmental & Social Management Journal and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The treatment of paper mill effluent for COD, TOC, total phenols and color removal was investigated using combined activated sludge-ozonation processes and single processes. The combined activated sludge-O3/pH 10 treatment was able to remove around 80% of COD, TOC and color from Kraft E(1) effluent. For the total phenols, the efficiency removal was around 70%. The ozonation post treatment carried out at pH 8.3 also showed better results than the single process. The COD, TOC, color and total phenols removal efficiency obtained were 75.5, 59.1, 77 and 52.3%, respectively. The difference in the concentrations of free radical produced by activated sludge-O3/pH 10 and activated sludge-O3/pH 8.3 affected mainly the TOC and total phenol removal values.