Search

Stroke, trauma, and neurodegenerative disorders cause loss of neurites (axons and dendrites) in addition to neuronal death. Neurite loss may result directly from a primary insult, secondary to parental neuron death, or secondary to a post-injury inflammatory response. Here, we use lipopolysaccharide and the alarmin S100β to selectively evaluate neurite loss caused by the inflammatory response. Activation of microglia and infiltrating macrophages by these stimuli causes neurite loss that far exceeds neuronal death, both in vitro and in vivo. Neurite loss is accompanied by the formation of cofilactin rods and aggregates (CARs), which are polymers of cofilin-1 and actin induced by oxidative stress and other factors. Mice deficient in either cofilin-1 or the superoxide-generating enzyme NADPH oxidase-2 show reduced CAR formation, neurite loss, and motor impairment. The findings identify a mechanism by which inflammation leads to neurite loss via CAR formation and highlight the relevance of neurite loss to functional impairment.

Aqueous zinc ion batteries provide new solutions for achieving environmentally friendly and safe energy storage devices. Unfortunately, the further application is hampered by the growth of zinc dendrites caused by uneven zinc deposition, hydrogen evolution and other side interfacial reactions at the zinc anode. Herein, a multifunctional Bi‐Bi2O3 hybrid artificial interface layer is constructed on the surface of the zinc anode using an in situ conversion reaction. Among them, the Bi‐Bi2O3 Schottky structure not only significantly accelerates the migration of Zn2+ through its built‐in electric field, but also effectively improves the hydrogen evolution barrier (ΔGH*), thereby suppressing side reactions. Moreover, the Schottky contact formed between the interface layer and the metal zinc interface also regulates the electronic distribution state on the zinc surface and optimizes the deposition process of Zn2+, ensuring a more uniform and orderly zinc deposition process. Based on the synergistic effect of dual Schottky junctions, symmetric batteries achieve stable cycling for 2000 h under the conditions of 1.0 mA cm−2 and 1.0 mAh cm−2. The full cell assembled with α‐MnO2 as the cathode maintains capacity of 112.7 mAh g−1 after 1000 cycles at 1 A g−1 with a capacity retention rate of 84%. [ABSTRACT FROM AUTHOR]

Zn metal anode is desired for aqueous batteries due to its high capacity and low redox potential. However, uneven Zn deposition and hydrogen evolution reaction (HER) have hindered the electrochemical reversibility and stability. Herein, an artificial solid electrolyte interphase (SEI) composed of metal center incorporated siloxane coupling with fluoride is in situ generated on Zn surface by a facile “etching–coating” process. This SZ‐SEI provides interaction sites with Zn2+, which helps with its desolvation at the interface and enlarges the transference number. Uniform Zn deposition underneath the layer is thus realized. Meanwhile, the SZ‐component hinders the adsorption of hydrogen atom and effectively suppresses HER. Thanks to the above effects, the cycle life of symmtric cells with SZ‐Zn electrodes extends to 2200 and 1400 h at the current densities of 10 and 20 mA cm−2, respectively. The coulombic efficiency of Zn plating/stripping also reaches 99.8% for 3800 cycles. In addition, the SZ‐Zn anode enables better rate capability and cycling stability of full cells. [ABSTRACT FROM AUTHOR]

• Snf7-3 KO mice reveal its role in synaptic function and cognitive processing. • Snf7-3 KO mice show age-dependent social recognition deficits and higher mEPSCs. • Conditional Snf7-3 KO causes early cognitive deficits and synaptic hyperactivity. • Snf7-3 deficiency increases pre- and postsynaptic puncta in hippocampal neurons. • Snf7-3 is crucial for synaptic maintenance and may contribute to neurodegeneration. Snf7-3 is a crucial component of the endosomal sorting complexes required for transport (ESCRT) pathway, playing a vital role in endolysosomal functions. To elucidate the role of Snf7-3 in vivo, we developed conventional-like and conditional Snf7-3 knockout (KO) mouse models using a "Knockout-first" strategy. Conventional-like Snf7-3 KO mice showed significantly reduced Snf7-3 mRNA expression, and older mice (25–40 weeks) exhibited impaired social recognition and increased miniature excitatory postsynaptic currents (mEPSCs). Similarly, conditional KO mice aged 8–24 weeks, with Snf7-3 specifically deleted in forebrain excitatory neurons, displayed impaired object location memory and elevated mEPSC frequency. Consistently, Snf7-3 knockdown in cultured mouse hippocampal neurons led to increased densities of pre- and postsynaptic puncta, supporting the observed increase in mEPSC frequency. In addition, enhanced dendritic complexity was observed in the medial prefrontal cortex of these mice, indicating early synaptic disturbances. Our findings underscore the critical role of Snf7-3 in maintaining normal cognitive functions and social behaviors. The observed synaptic and behavioral deficits in both conventional-like and conditional KO mice highlight the importance of Snf7-3 in specific neuronal populations, suggesting that early synaptic changes could precede more pronounced cognitive impairments. [ABSTRACT FROM AUTHOR]

Currently, the realization of controllable Li electrodeposits to further extend the cycling life of Li metal anode remains challenging. Herein, it is reported that carbon nanosheet array‐loaded ferromagnetic CoF2 nanoparticles on carbon cloth (CC@CoF2/C) as an internal micro‐magnetic field source to manipulate the dynamic trajectory of Li+ deposition via the magnetohydrodynamic effect. This approach ensures uniform lithium‐ion distribution and improves deep plating capacity, achieving a prolonged cycle life of the dendrite‐free Li anode. Finite element simulations, in situ characterizations, and electrochemical tests confirm that magnetic CoF2 not only guides Li+ migration through Lorentz force to prevent dendritic growth but also improves uniform Li deposition due to the in situ conversion of LiF‐rich solid electrolyte interphase during electroplating. Meanwhile, a CC@CoF2/C‐based half‐cell operates stably over 10 000 h at 1 mA cm−2 with a low 7.8 mV overpotential. When matched with a commercial LiFePO4 cathode, the full cell reveals a high capacity of 122.96 mAh g−1 at a 2 C rate after 1000 cycles, retaining 91.95% capacity. The proposed strategy can be effectively expanded and adapted to investigate the deposition behavior of a wide range of metal anodes, offering a versatile and robust analytical framework for addressing diverse metal‐based electrochemical systems. [ABSTRACT FROM AUTHOR]

With the development of electronic packaging technology toward miniaturization, integration, and high reliability, the diameter and pitch of solder joints continue to shrink. Adjacent solder joints are highly susceptible to electrochemical migration (ECM) due to the synergistic effects of high-density electric fields, water vapor, and contaminants. Dust has become one of the non-negligible causal factors in ECM studies due to air pollution. In this study, 0.2 mM/L NaCl and Na2SO4 solutions were used to simulate soluble salt in dust, and the failure mechanism of an Sn-58Bi solder ECM in the soluble salt in dust was analyzed by a water-droplet experimental method. It was shown that the mean failure time of the ECM of an Sn-58Bi solder in an NaCl solution (53 s) was longer than that in an Na2SO4 solution (32 s) due to the difference in the anodic dissolution characteristics in the two soluble salt solutions. XPS analysis revealed that the dendrites produced by the ECM process were mainly composed of Sn, SnO, and SnO2, and there were precipitation products—Sn(OH)2 and Na2SO4—attached to the dendrites. The corrosion potential in the NaCl solution (−0.351 V) was higher than that in the Na2SO4 solution (−0.360 V), as shown by a polarization test, indicating that the Sn-58Bi solder had better corrosion resistance in the NaCl solution. Therefore, an Sn-58Bi solder has better resistance to electrochemical migration in an NaCl solution compared to an Na2SO4 solution. [ABSTRACT FROM AUTHOR]

A review of different models of spike neural networks has been conducted. A spike type neural network is developed in the article. The mathematical model of exchange of neurotransmitters between neurons is proposed. An algorithm for network operation and neuron interaction is proposed, as well as an approach to training the network based on the formation of new connections from dendrites and increasing the signal transmission coefficient. The model of neural network was created in Python using the developed algorithm and mathematical model. To speed up the calculations, they were paralleled using the Numba library. The library Matplotlib was used for visual modelling and plotting the number of neurotransmitters on neurons. Experimental studies of the developed model of biological type network were carried out. It was shown that the developed network after training responds faster to the signals that were applied to it in the process of training. [ABSTRACT FROM AUTHOR]

The unstable anode/electrolyte interphase induces severe lithium dendrite growth hindering the practical application of lithium metal batteries. The lithium alloy interphase presents a promising strategy for regulating Li+ plating/stripping behavior. However, binary or ternary alloys are insufficient to address various challenges in lithium metal batteries and the high temperature required for alloy preparation hampers their direct applications on lithium metal surfaces. In this study, a high‐entropy alloy (HEA) interphase is developed on lithium metal surfaces via room‐temperature magnetron sputtering, showcasing multifunctional advantages in regulating Li+ plating/stripping behavior. The cocktail effect of the (HEA) facilitated the formation of a homogeneous amorphous interphase with abundant lithiophilic sites and magnetic properties, promoting uniform Li+ nucleation and deposition. Furthermore, the high mechanical strength and corrosion resistance of HEA provided physicochemical stability for the lithium anode interphase, consistently suppressing dendrite growth. Consequently, lithium metal anodes with HEA interphases exhibited robust cycling performance lasting over 4000 h at 2 mA cm−2. The LFP full battery demonstrated high‐capacity retention of 90% with an average Coulombic efficiency of 99.7%. Thus, the HEA interphases on lithium metal surfaces offer controllable regulation of Li+ deposition behavior through high‐entropy manipulation, opening novel strategies for stable lithium metal batteries. [ABSTRACT FROM AUTHOR]

Reelin, a secreted glycoprotein, plays a crucial role in guiding neocortical neuronal migration, dendritic outgrowth and arborization, and synaptic plasticity in the adult brain. Reelin primarily operates through the canonical lipoprotein receptors apolipoprotein E receptor 2 (Apoer2) and very low-density lipoprotein receptor (Vldlr). Reelin also engages with noncanonical receptors and unidentified coreceptors; however, the effects of which are less understood. Using high-throughput tandem mass tag (TMT) liquid chromatography tandem mass spectrometry (LC-MS/MS)-based proteomics and gene set enrichment analysis (GSEA), we identified both shared and unique intracellular pathways activated by Reelin through its canonical and noncanonical signaling in primary murine neurons of either sex during dendritic growth and arborization. We observed pathway cross talk related to regulation of cytoskeleton, neuron projection development, protein transport, and actin filament-based process. We also found enriched gene sets exclusively by the noncanonical Reelin pathway including protein translation, mRNA metabolic process, and ribonucleoprotein complex biogenesis suggesting Reelin fine-tunes neuronal structure through distinct signaling pathways. A key discovery is the identification of aldolase A, a glycolytic enzyme and actin-binding protein, as a novel effector of Reelin signaling. Reelin induced de novo translation and mobilization of aldolase A from the actin cytoskeleton. We demonstrated that aldolase A is necessary for Reelin-mediated dendrite growth and arborization in primary murine neurons and mouse brain cortical neurons. Interestingly, the function of aldolase A in dendrite development is independent of its known role in glycolysis. Altogether, our findings provide new insights into the Reelin-dependent signaling pathways and effector proteins that are crucial for dendritic development. [ABSTRACT FROM AUTHOR]

Previous studies have primarily focused on promoting the (002) crystal plane of electrodeposited zinc (Zn) to grow thin Zn plates parallel to the electrode surface and thus achieving the dendrite‐suppressed Zn anodes. In contrast, this work adopts a novel approach. In situ construct a tin (Sn) modification layer on Zn foil. Through in‐depth cross‐sectional morphological analyses, the as‐designed Sn interface is observed to induce (101)‐preferred electrodeposition of Zn, leading to well‐ordered alignment of Zn thin plates “standing‐up” against the electrode surface at a universal angle of 65°. Such crystallographic characteristic consequently guarantees a flat and compact morphology of the electrochemically deposited Zn layer, thus suppressing the notorious problems of dendritic Zn growth and hydrogen generation. Consequently, the dendrite‐free Sn–Zn anode exhibits long‐term cycling stability of 4000 h at 1 mA cm−2 and 0.5 mAh cm−2, a significant improvement in comparison to the 50 h stability observed for unmodified Zn anode. The findings in this study offer a deep understanding of interface mechanisms and are instructive for innovative interface design for metal anodes. [ABSTRACT FROM AUTHOR]

The practical applications of zinc metal anode are restricted by detrimental dendrite growth and hydrogen evolution reaction (HER), especially at high current densities. Previous works have demonstrated that constructing Zn(002) texture could effectively suppress dendrite growth and HER. However, the surface grain distribution of commercial zinc metal remains indistinct. Herein, a simple mechanical grinding approach is demonstrated to construct (002)‐textured zinc metal anodes. After grinding, the (002) relative texture coefficient of commercial zinc metal increases from 10.58 to 42.28, indicating a significant more (002) planes exposure. As prepared (002)‐textured zinc anode exhibits a high critical current density of 141 mA cm−2 and stably cycles for over 1500 cycles at 50 mA cm−2 and 1 mAh cm−2. Benefiting from the stability and fast kinetics of this (002)‐textured zinc anode, the zinc‐ion capacitor achieves a power density of 8500 W kg−1 and long cycle over 10 000 cycles with Coulombic efficiency (CE) exceeding 99.9%. This work provides both fundamental and practical insights for dendrite‐free and HER‐suppressed zinc metal anodes and inspiring guidance for other metal batteries. [ABSTRACT FROM AUTHOR]

• Postnatal inflammation causes evolving deficits in cortical neuronal dendritic maturation. • EEG was effective for identifying the early onset of cortical neuronal dysmaturation. • DTI and NODDI only detect established neuronal changes after postnatal inflammation. • EEG and MRI are complementary tools for assessing postnatal cortical dysmaturation. Exposure to postnatal systemic inflammation is associated with increased risk of brain injury in preterm infants, leading to impaired maturation of the cerebral cortex and adverse neurodevelopmental outcomes. However, the optimal method for identifying cortical dysmaturation is unclear. Herein, we compared the utility of electroencephalography (EEG), diffusion tensor imaging (DTI), and neurite orientation dispersion and density imaging (NODDI) at different recovery times after systemic inflammation in newborn rats. Sprague Dawley rat pups of both sexes received single-daily lipopolysaccharide (LPS; 0.3 mg/kg i.p.; n = 51) or saline (n = 55) injections on postnatal days (P)1, 2, and 3. A subset of these animals were implanted with EEG electrodes. Cortical EEG was recorded for 30 min from unanesthetized, unrestrained pups at P7, P14, and P21, and in separate groups, brain tissues were collected at these ages for ex-vivo MRI analysis (9.4 T) and Golgi–Cox staining (to assess neuronal morphology) in the motor cortex. Postnatal inflammation was associated with reduced cortical pyramidal neuron arborization from P7, P14, and P21. These changes were associated with dysmature EEG features (e.g., persistence of delta waveforms, higher EEG amplitude, reduced spectral edge frequency) at P7 and P14, and higher EEG power in the theta and alpha ranges at P21. By contrast, there were no changes in cortical DTI or NODDI in LPS rats at P7 or P14, while there was an increase in cortical fractional anisotropy (FA) and decrease in orientation dispersion index (ODI) at P21. EEG may be useful for identifying the early evolution of impaired cortical development after early life postnatal systemic inflammation, while DTI and NODDI seem to be more suited to assessing established cortical changes. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) provides an alternate and efficient route for producing intricate geometries, such as turbine blades in the high-pressure compression stages of an aero-engine. Herein, we present a multi-scale modeling approach involving the simulation of the laser-based directed energy deposition (L-DED) process and the resulting microstructure evolution to identify the process parameters for producing defect-free directionally solidified (DS)/single-crystalline (SX) Ni-based superalloy components. Notably, our approach involves a novel process model formulated in a diffuse-interface framework in contrast to the volume of fluid (VoF) and level-set methods documented in the literature. The temperature history obtained from the process simulations serves as an input for a Monte Carlo-based solidification microstructure model, which predicts the feasibility of epitaxial growth for a given set of process parameters. A parametric study is conducted using the above models by varying the laser power and scanning velocity to obtain an optimal processing window for epitaxial growth, which is validated experimentally. The study reveals that higher laser power and scanning velocities lead to epitaxial growth. [ABSTRACT FROM AUTHOR]

Aqueous rechargeable zinc‐ion batteries are emerging as green and safe energy devices owing to their high energy density and eco‐friendliness. The bottleneck is the inhomogeneous nucleation resulting in the growth of Zn dendrites and the parasitic side reactions at the anode. Herein, an electrochemical anode engineering strategy is demonstrated to curb the uncontrolled dendritic growth and side reactions. It involves the in situ generation of a solid‐electrolyte interface based on a Zn nanoparticle‐embedded poly(acrylic acid) hybrid layer (PAA‐nZn) on the anode. The homogeneously distributed polar functionalities and porous nature of the polymer regulate the uniform zinc ion flux, and the embedded zinc particle serves as nucleation sites for zinc plating. The hybrid layer reduces the nucleation overpotential and promotes instantaneous nucleation. The symmetrical cell made with PAA‐nZn@Zn has a lifecycle of >860 h with a voltage gap of 28 mV. The full cell fabricated by pairing the engineered anode with α‐MnO2 cathode showed a high discharge specific capacity of 238.3 mAh g−1 at 0.2 A g−1 with a capacity retention of 81.76% after 200 cycles and a long lifecycle. The electrochemical engineering of the anode suppresses the dendritic growth and protects the anode from unwanted side reactions and passivation. [ABSTRACT FROM AUTHOR]

Aqueous battery with nonflammable and instinctive safe properties has received great attention. However, issues related to Zn anode such as side reactions and rampant dendrite growth hinder the long‐term circulation of AZMBs. Herein, an ultrathin(35 nm) MoO3 coating is deposited on the Zn anode by means of vacuum vapor deposition for the first time. Due to the peculiar layer structure of MoO3, insertion of Zn2+ in ZnxMoO3 acts as Zn2+ ion conductor, which regulates Zn2+ deposition in an ordered manner. Additionally, the MoO3 coating can also inhibit the hydrogen evolution and corrosion reactions at the interface. Therefore, both Zn//MoO3@Cu asymmetric battery and Zn symmetric battery cells manage to deliver satisfactory electrochemical performances. The symmetric cell assembled with MoO3@Zn shows a significant long cycle life of more than 1600 h at a current density of 2 mA cm−2. Meanwhile, the MoO3@Zn//Cu asymmetric cell exhibits an ultrahigh Zn deposition/stripping efficiency of 99.82% after a stable cycling of 650 h at 2 mA cm−2. This study proposes a concept of “zincophile Zn2+ conductor regulation” to dictate Zn electrodeposition and broadens novel design of vacuum evaporation for nano MoO3 modified Zn anodes. [ABSTRACT FROM AUTHOR]

Achieving reversible plating/stripping of zinc (Zn) anodes is crucial in aqueous Zn‐ion batteries (AZIBs). However, undesired dendrite growth and parasitic side reactions severely deteriorate battery lifespan. The construction of stable protective coating is an effective strategy to enhance anode stability. In this study, a multifunctional nanodiamond (ND) inorganic layer is designed and constructed on both Zn and Cu electrodes that can both effectively inhibit dendrite growth and suppress Zn anode corrosion. Experimental results and theoretical calculations demonstrate that this artificial protective layer, with ultra‐high surface energy, enables the controlled creation of abundant nucleation sites (in the order of 1012 cm−2) for the homogenization of ion flux and electric field on the anode. It is found that zinc ions preferentially adhere to the diamond surfaces with lower diffusion barriers, leading to uniform zinc deposition. A symmetric cell with the ND‐protected Zn (Zn‐ND) anode exhibits reversible plating/stripping behavior for an impressive duration of over 3600 h at 1 mA cm−2. Furthermore, the MnO2||Zn full battery retains 90% of its initial capacity after 3500 cycles at 2 A g−1, and assembled hybrid capacitor operates smoothly over 65 000 cycles at 10 A g−1. These results underscore the potential of this coating as a promising solution for achieving highly stable Zn anodes for aqueous batteries. [ABSTRACT FROM AUTHOR]

Complex systems are neither fully determined nor completely random. Biological complex systems, including single neurons, manifest intermediate regimes of randomness that recruit integration of specific combinations of functionally specialized subsystems. Such emergence of biological function provides the substrate for the expression of degeneracy, the ability of disparate combinations of subsystems to yield similar function. Here, we present evidence for the expression of degeneracy in morphologically realistic models of dentate gyrus granule cells (GCs) through functional integration of disparate ion-channel combinations. We performed a 45-parameter randomized search spanning 16 active and passive ion channels, each biophysically constrained by their gating kinetics and localization profiles, to search for valid GC models. Valid models were those that satisfied 17 sub- and suprathreshold cellular-scale electrophysiological measurements from rat GCs. A vast majority (>99%) of the 15,000 random models were not electrophysiologically valid, demonstrating that arbitrarily random ion-channel combinations would not yield GC functions. The 141 valid models (0.94% of 15,000) manifested heterogeneities in and cross-dependencies across local and propagating electrophysiological measurements, which matched with their respective biological counterparts. Importantly, these valid models were widespread throughout the parametric space and manifested weak cross-dependencies across different parameters. These observations together showed that GC physiology could neither be obtained by entirely random ion-channel combinations nor is there an entirely determined single parametric combination that satisfied all constraints. The complexity, the heterogeneities in measurement and parametric spaces, and degeneracy associated with GC physiology should be rigorously accounted for while assessing GCs and their robustness under physiological and pathological conditions. NEW & NOTEWORTHY: A recent study from our laboratory had demonstrated pronounced heterogeneities in a set of 17 electrophysiological measurements obtained from a large population of rat hippocampal granule cells. Here, we demonstrate the manifestation of ion-channel degeneracy in a heterogeneous population of morphologically realistic conductance-based granule cell models that were validated against these measurements and their cross-dependencies. Our analyses show that single neurons are complex entities whose functions emerge through intricate interactions among several functionally specialized subsystems. [ABSTRACT FROM AUTHOR]

The amino acid transmitter γ-aminobutyric acid (GABA) is suspected to play an important role in regulating the activity of the gonadotropin-releasing hormone (GnRH) neurons controlling fertility. Rodent GnRH neurons have a novel dendritic compartment termed the " distal dendron " through which action potentials pass to the axon terminals and where inputs from the kisspeptin pulse generator drive pulsatile GnRH secretion. Combining Gnrh1- Cre mice with the Cre-dependent calcium sensor GCaMP6 and confocal imaging of acute brain slices, we examined whether GABA regulated intracellular calcium concentrations ([Ca2+]) in the GnRH neuron distal dendron. Short puffs of GABA on the dendron evoked either a monophasic sustained suppression of [Ca2+] or a biphasic acute elevation in [Ca2+] followed by the sustained suppression. Application of muscimol to the dendron replicated the acute elevation in [Ca2+] while baclofen generated the sustained suppression. Robust GABAB receptor-mediated inhibition was observed in 80% to 100% of dendrons recorded from females across the estrous cycle and from approximately 70% of dendrons in males. In contrast, the GABAA receptor–mediated excitation was rare in males and varied across the estrous cycle, being most prominent at proestrus. The activation of GABAB receptors potently suppressed the stimulatory effect of kisspeptin on the dendron. These observations demonstrate that the great majority of GnRH neuron distal dendrons are regulated by GABAergic inputs in a sex- and estrous cycle–dependent manner, with robust GABAB receptor-mediated inhibition being the primary mode of signaling. This provides a new, kisspeptin-independent, pathway for the regulation of pulsatile and surge modes of GnRH secretion in the rodent. [ABSTRACT FROM AUTHOR]

In this work, the effect of tungsten inert gas (TIG) remelting on the microstructure, mechanical properties, and corrosion resistance of 5052 aluminum alloy joints produced by metal inert gas (MIG) welding is investigated. The results indicate that after TIG remelting of MIG welds, the proportion of dendrites increases in the remelted weld zone (WZ), porosity decreases by 76.9%, and the Fe elements in the second phase become coarser and more segregated. In contrast, the Mg elements form a solid solution with a decreased degree of segregation. In addition, the average grain size of the remelted structure decreases, while the proportion of sub-grain boundaries (SGBs) and the kernel average misorientation (KAM) values increase. Moreover, the heat-affected zone (HAZ) widens, and the grains become coarser. An increase of 4.5% in tensile strength and 20.0% in elongation was observed in the TIG-remelted joints after TIG remelting. Electrochemical and immersion tests on the TIG-remelted microstructure showed reduced corrosion resistance. Electrochemical tests mainly exhibited galvanic corrosion, resulting in the formation of pits. The types of corrosions observed in the immersion test differ from those in the electrochemical test, primarily exhibiting exfoliation corrosion and pitting corrosion. A higher geometric dislocation density (ρGND) in the structure increases the susceptibility to corrosion.

The cytoplasmic FMR1-interacting protein 2 (CYFIP2) have diverse molecular functions in neurons, including the regulation of actin polymerization, mRNA translation, and mitochondrial morphology and function. Mutations in the CYFIP2 gene are associated with early-onset epilepsy and neurodevelopmental disorders, while decreases in its protein levels are linked to Alzheimer's disease (AD). Notably, previous research has revealed AD-like phenotypes, such as dendritic spine loss, in the hippocampal CA1 pyramidal neurons of 12-month-old Cyfip2 heterozygous mice but not of age-matched CA1 pyramidal neuron-specific Cyfip2 conditional knock-out (cKO) mice. This study aims to investigate whether dendritic spine loss in Cyfip2 cKO mice is merely delayed compared to Cyfip2 heterozygous mice, and to explore further neuronal phenotypes regulated by CYFIP2 in aged mice. We characterized dendrite and dendritic protrusion morphologies, along with excitatory/inhibitory synapse densities in CA1 pyramidal neurons of 17-month-old Cyfip2 cKO mice. Overall dendritic branching was normal, with a reduction in the length of basal, not apical, dendrites in CA1 pyramidal neurons of Cyfip2 cKO mice. Furthermore, while dendritic protrusion density remained normal, alterations were observed in the length of mushroom spines and the head volume of stubby spines in basal, not apical, dendrites of Cyfip2 cKO mice. Although excitatory synapse density remained unchanged, inhibitory synapse density increased in apical, not basal, dendrites of Cyfip2 cKO mice. Consequently, a cell-autonomous reduction of CYFIP2 appears insufficient to induce dendritic spine loss in CA1 pyramidal neurons of aged mice. However, CYFIP2 is required to maintain normal dendritic length, dendritic protrusion morphology, and inhibitory synapse density.

Abstract A compromised capacity to maintain NAD pools is recognized as a key underlying pathophysiological feature of neurodegenerative diseases. NAD acts as a substrate in major cell functions including mitochondrial homeostasis, cell signalling, axonal transport, axon/Wallerian degeneration, and neuronal energy supply. Dendritic degeneration is an early marker of neuronal stress and precedes cell loss. However, little is known about dendritic structural preservation in pathologic environments and remodelling in mature neurons. Retinal ganglion cell dendritic atrophy is an early pathological feature in animal models of the disease and has been demonstrated in port-mortem human glaucoma samples. Here we report that a nicotinamide (a precursor to NAD through the NAD salvage pathway) enriched diet provides robust retinal ganglion cell dendritic protection and preserves dendritic structure in a rat model of experimental glaucoma. Metabolomic analysis of optic nerve samples from the same animals demonstrates that nicotinamide provides robust metabolic neuroprotection in glaucoma. Advances in our understanding of retinal ganglion cell metabolic profiles shed light on the energetic shift that triggers early neuronal changes in neurodegenerative diseases. As nicotinamide can improve visual function short term in existing glaucoma patients, we hypothesize that a portion of this visual recovery may be due to dendritic preservation in stressed, but not yet fully degenerated, retinal ganglion cells.

A compromised capacity to maintain NAD pools is recognized as a key underlying pathophysiological feature of neurodegenerative diseases. NAD acts as a substrate in major cell functions including mitochondrial homeostasis, cell signalling, axonal transport, axon/Wallerian degeneration, and neuronal energy supply. Dendritic degeneration is an early marker of neuronal stress and precedes cell loss. However, little is known about dendritic structural preservation in pathologic environments and remodelling in mature neurons. Retinal ganglion cell dendritic atrophy is an early pathological feature in animal models of the disease and has been demonstrated in port-mortem human glaucoma samples. Here we report that a nicotinamide (a precursor to NAD through the NAD salvage pathway) enriched diet provides robust retinal ganglion cell dendritic protection and preserves dendritic structure in a rat model of experimental glaucoma. Metabolomic analysis of optic nerve samples from the same animals demonstrates that nicotinamide provides robust metabolic neuroprotection in glaucoma. Advances in our understanding of retinal ganglion cell metabolic profiles shed light on the energetic shift that triggers early neuronal changes in neurodegenerative diseases. As nicotinamide can improve visual function short term in existing glaucoma patients, we hypothesize that a portion of this visual recovery may be due to dendritic preservation in stressed, but not yet fully degenerated, retinal ganglion cells. [ABSTRACT FROM AUTHOR]

The branched architecture of neuronal dendrites is a key factor in how neurons form ordered networks and discoveries continue to be made identifying proteins and protein–protein interactions that direct or execute the branching and extension of dendrites. Our prior work showed that the molecular scaffold Pdlim5 and delta-catenin, in conjunction, are two proteins that help regulate the branching and elongation of dendrites in cultured hippocampal neurons and do so through a phosphorylation-dependent mechanism triggered by upstream glutamate signaling. In this report we have focused on Pdlim5's multiple scaffolding domains and how each contributes to dendrite branching. The three identified regions within Pdlim5 are the PDZ, DUF, and a trio of LIM domains; however, unresolved is the intra-molecular conformation of Pdlim5 as well as which domains are essential to regulate dendritic branching. We address Pdlim5's structure and function by examining the role of each of the domains individually and using deletion mutants in the context of the full-length protein. Results using primary hippocampal neurons reveal that the Pdlim5 DUF domain plays a dominant role in increasing dendritic branching. Neither the PDZ domain nor the LIM domains alone support increased branching. The central role of the DUF domain was confirmed using deletion mutants in the context of full-length Pdlim5. Guided by molecular modeling, additional domain mapping studies showed that the C-terminal LIM domain forms a stable interaction with the N-terminal PDZ domain, and we identified key amino acid residues at the interface of each domain that are needed for this interaction. We posit that the central DUF domain of Pdlim5 may be subject to modulation in the context of the full-length protein by the intra-molecular interaction between the N-terminal PDZ and C-terminal LIM domains. Overall, our studies reveal a novel mechanism for the regulation of Pdlim5's function in the regulation of neuronal branching and highlight the critical role of the DUF domain in mediating these effects. [ABSTRACT FROM AUTHOR]

Artificial interfaces provide a comprehensive approach to controlling zinc dendrite and surface corrosion in zinc‐based aqueous batteries (ZABs). However, due to consistent volume changes during zinc plating/stripping, traditional interfacial layers cannot consistently adapt to the dendrite surface, resulting in uncontrolled dendrite growth and hydrogen evolution. Herein, dynamic covalent bonds exhibit the Janus effect towards zinc deposition at different current densities, presenting a holistic strategy for stabilizing zinc anode. The PBSC intelligent artificial interface consisting of dynamic B−O covalent bonds is developed on zinc anode to mitigate hydrogen evolution and restrict dendrite expansion. Owing to the reversible dynamic bonds, PBSC exhibits shape self‐adaptive characteristics at low current rates, which rearranges the network to accommodate volume changes during zinc plating/stripping, resisting hydrogen evolution. Moreover, the rapid association of B−O dynamic bonds enhances mechanical strength at dendrite tips, presenting a shear‐thickening effect and suppressing further dendrite growth at high current rates. Therefore, the assembled symmetrical battery with PBSC maintains a stable cycle of 4500 hours without significant performance degradation and the PBSC@Zn||V2O5 pouch cell demonstrates a specific capacity exceeding 170 mAh g−1. Overall, the intelligent interface with dynamic covalent bonds provides innovative approaches for zinc anode interfacial engineering and enhances cycling performance. [ABSTRACT FROM AUTHOR]

The generation of dendrites is a common issue of lithium metal battery, while the failure mechanism is still uncovered especially at low current densities/capacities. To better understand the mechanical factors caused by lithium morphologic evolution in the whole dynamic process of a cycle, this study proposes a failure mechanism of the lithium metal anode under a safe condition of rather low current density/capacity. The anode and the electrolyte fail to maintain effective contact throughout the dynamic cycling process due to the accumulation and extrusion of lithium deposits. To guarantee effective contact, a facile and low‐cost mechanical stamping method for lithium metal anode modification is accordingly presented. The curved lithium electrode can stably cycle for more than 300 cycles at 3 mA cm−2. This study is believed to provide a more in‐depth understanding toward the evolvement of lithium morphology to boost practical use of the lithium metal anodes. [ABSTRACT FROM AUTHOR]

Lithium metal batteries specialize in energy density, while the immoderate dendrite growth and solid electrolyte interphase (SEI) proliferation have been impeding their practical application. The key is the regulation of Li+ diffusion/nucleation behaviors toward a dense deposition. Herein, Li9Al4/Li3N energized mixed ionic/electronic conductive (MIEC) interfaces are pre‐implanted in both the surface and bulk of the lithium metal anode. Such MIEC interfaces are activated from the in situ conversion and nano‐alloying reactions between AlN and metallic Li and are uniformly dispersed via facile mechanical kneading. In vitro, MIEC interfaces participate in the formation of an inorganic‐enriched SEI that balances ionic transport, electron blocking, and mechanical strength to guarantee homogeneous ion fluxes and structural integrity. In vivo, a unique nanorod‐array architecture enables a released internal stress and rapid diffusion kinetics, affording a dense and large granular plating manner. As a result, the symmetric cell delivers a striking cumulative capacity of >120000 mAh cm−2 at 20 mA cm−2@20 mAh cm−2 with a prolonged lifespan of over 6000 h. The improved machinability also enables a scalable fabrication of ultrathin foil to achieve a stable high‐areal‐capacity full cell for 320 cycles with enhanced energy density characteristics both gravimetrically and volumetrically. [ABSTRACT FROM AUTHOR]

With the development of social industrialization, energy issues have become a hot topic at present. Traditional lithium-ion batteries, due to their poor safety and high cost, cannot meet the current application needs in the energy storage field in the long term. Therefore, the development of suitable new energy has aroused people's deep thinking. Aqueous zinc-ion batteries (AZIBs) have attracted attention from the scientific research community in recent years due to their high safety, cleanliness, and other advantages. However, dendrites are easily grown on the zinc anode, and free water molecules can also corrode the zinc anode, causing side reactions such as hydrogen evolution and passivation, seriously affecting the long-term cycling performance and stability of the battery. This work introduces a new type of ionic liquid additive 1-cyanobutyl-3-methylimidazole chloride (MCBI) to optimize aqueous electrolytes. Before the deposition of zinc ions on the anode surface, MCBI cations will preferentially land on the anode. Due to their special structures of Electron-withdrawing group and nitrogen heterocycles, they will tightly adsorb on the zinc surface in a unique shape of the “Check mark” posture. This provides abundant sites for the deposition of zinc ions, allowing zinc atoms to arrange regularly between MCBI ions, thereby reducing the generation of dendrites. Due to the steric hindrance effect, by-products (Zinc hydroxide sulfate) will also accumulate in an orderly manner around additive ions, forming channels for uniform deposition of zinc ions; The hydrophobic alkyl groups of MCBI cations will repel most of the free water molecules outside the anode, thereby reducing hydrogen evolution reaction (HER). In this work, under the optimal concentration conditions, the Coulomb efficiency of Zn//Cu asymmetric cell with MCBI additive can reach 99. 37% after 200 cycles; Zn//Zn symmetric batteries can stably cycle for more than 1600 h at low current density (0. 5 mA/cm2), and can cycle for more than 1000 h at 10 mA/cm², 5 mA·h/cm². Finally, VO2 as the cathode maintains a high-capacity retention rate of 88. 5% after 500 cycles in the full battery. This work provides new ideas for the anode modification strategy of aqueous zinc ion batteries. [ABSTRACT FROM AUTHOR]

The functional building blocks of single neurons can be conceptualized as network motifs that span the molecular and cellular scales of neuronal physiology. Single-neuron functions and neuronal plasticity emerge from interactions across several network motifs that span different neuronal compartments. Network motifs in cellular neurophysiology display various forms of degeneracy: disparate molecular components can yield the same network motif, representing component degeneracy; similar neural function can be achieved by network motifs with the same architecture but variable edge strengths, representing edge degeneracy; and the same neuronal function can be achieved through different network motifs, representing motif degeneracy. The functional modularity of network motifs allows targeted manipulation of specific motifs towards achieving physiological goals or devising cures for pathology. Concepts from network science and graph theory, including the framework of network motifs, have been frequently applied in studying neuronal networks and other biological complex systems. Network-based approaches can also be used to study the functions of individual neurons, where cellular elements such as ion channels and membrane voltage are conceptualized as nodes within a network, and their interactions are denoted by edges. Network motifs in this context provide functional building blocks that help to illuminate the principles of cellular neurophysiology. In this review we build a case that network motifs operating within neurons provide tools for defining the functional architecture of single-neuron physiology and neuronal adaptations. We highlight the presence of such computational motifs in the cellular mechanisms underlying action potential generation, neuronal oscillations, dendritic integration, and neuronal plasticity. Future work applying the network motifs perspective may help to decipher the functional complexities of neurons and their adaptation during health and disease. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Electrochemistry is the property of Journal of Electrochemistry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Ceramics / Taoci Xuebao is the property of Journal of Ceramics Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Microstructure of argyrodite solid‐state electrolyte (SSE) critically affects lithium metal electrodeposition/dissolution. While the stability of unmodified SSE is mediocre, once optimized state‐of‐the‐art electrochemical performance is achieved (symmetric cells, full cells with NMC811) without secondary interlayers or functionalized current collectors. Planetary mechanical milling in wet media (m‐xylene) is employed to alter commercial Li6PS5Cl (LPSCl) powder. Quantitative stereology demonstrates how milling progressively refines grain and pore size/distribution in the SSE compact, increases its density, and geometrically smoothens the SSE‐Li interface. Mechanical indentation demonstrates that these changes lead to reduced site‐to‐site variation in the compact's hardness. Milled microstructures promote uniform early‐stage electrodeposition on foil collectors and stabilize solid electrolyte interphase (SEI) reactivity. Analysis of half‐cells with bilayer electrolytes demonstrates the importance of microstructure directly contacting current collector, with interface roughness due to pore and grain size distribution being key. For the first time, short‐circuiting Li metal dendrite is directly identified, employing 1.5 mm diameter "mini" symmetrical cell and cryogenic focused ion beam (cryo‐FIB) electron microscopy. The branching sheet‐like dendrite traverses intergranularly, filling the interparticle voids and forming an SEI around it. Mesoscale modeling reveals the relationship between Li‐SSE interface morphology and the onset of electrochemical instability, based on underlying reaction current distribution. [ABSTRACT FROM AUTHOR]

Porous metal current collectors (CCs) serve as key component for aqueous Zn‐ion batteries (AZIBs). Herein, a lightweight 3D‐Cu architecture with customizable geometries is developed to enable reversible Zn‐metal cycling. The 3D‐Cu is prepared by 3D‐printing a crosslink‐able polymer scaffold followed by Cu‐metallization. The printed architecture is optimized to endow 3D‐Cu with electric conductivity that is on‐par with commercial Cu foam, but can reduce ≈80% of the weight and consumption of Cu. A Zn‐philic graphene (Gr) coating is adopted to promote uniform and (002)‐preferred Zn growth onto the 3D‐Cu surface, creating a 3DP‐Cu@Gr architecture that induces conformal Zn‐deposition and greatly suppressed H2‐evolution reaction. The 3DP‐Cu@Gr||Zn shows stable 700 cycles at 4 mA cm−2 and 2 mAh cm−2, with coulombic efficiency >99.6%. Zn‐loaded 3D‐electrodes enable symmetrical cells with stable 300 h cycling at 10 mA cm−2, delivering a specific accumulated capacity of 86.7 Ah g−1. This represents an unprecedented combination of cycle stability, high charge rate, and electrode lightweight. The all‐printed pantacle‐shape full pouch cells (3.6 mAh) exhibit 91.4% capacity retention after 200 cycles at 1 C. Possessing unusual design freedom, this strategy demonstrates a pathway for developing lightweight Cu CCs and customizable high‐energy AZIBs. [ABSTRACT FROM AUTHOR]

Since the days of Ramón y Cajal, the vast diversity of neuronal and particularly dendrite morphology has been used to catalog neurons into different classes. Dendrite morphology varies greatly and reflects the different functions performed by different types of neurons. Significant progress has been made in our understanding of how dendrites form and the molecular factors and forces that shape these often elaborately sculpted structures. Here, we review work in the nematode Caenorhabditis elegans that has shed light on the developmental mechanisms that mediate dendrite morphogenesis with a focus on studies investigating ciliated sensory neurons and the highly elaborated dendritic trees of somatosensory neurons. These studies, which combine time-lapse imaging, genetics, and biochemistry, reveal an intricate network of factors that function both intrinsically in dendrites and extrinsically from surrounding tissues. Therefore, dendrite morphogenesis is the result of multiple tissue interactions, which ultimately determine the shape of dendritic arbors. [ABSTRACT FROM AUTHOR]

Zinc anodes in aqueous batteries face challenges such as dendrite growth and interfacial instability. This study investigates the use of cysteine as an electrolyte additive to address these issues. By establishing the correlation between the size of zinc nuclei and the surface tensions/contact angle at the electrolyte‐anode interface, it is demonstrated that the addition of cysteine in the electrolyte alters the surface tensions/contact angle at the electrolyte‐anode interface and the nucleation process of zinc. This alteration results in the formation of smaller and more dispersed nuclei, as opposed to the formation of larger island grains. This has a profound impact on the subsequent deposition growth process, enabling smooth and uniform zinc electrodeposition without the formation of dendrites. Additionally, cysteine molecules create a stable interface during zinc plating and stripping, effectively preventing corrosion from side reactions. The incorporation of cysteine in the electrolyte significantly enhances cycling stability and extends the lifespan of zinc anodes in aqueous batteries. [ABSTRACT FROM AUTHOR]

In fluoride-assisted galvanic replacement reaction (FAGRR), metallic dendrites are formed simultaneously with hydrogen gas. However, the presence of hydrogen bubbles impedes the reduction of metallic ions to form metallic dendrites. This study investigates the FAGRR approach to manufacturing Ag dendrites where ethanol is incorporated into an AgNO3 reaction solution. The findings of this study demonstrate the efficacy of ethanol as an antifoaming agent in enhancing the deposition of the Ag dendrites during the FAGRR process. The antifoaming effect of ethanol becomes more intense at higher concentrations of AgNO3. The introduction of ethanol into FAGRR can significantly improve processing efficiency and yield in the limited time for manufacturing science and engineering. [ABSTRACT FROM AUTHOR]

Binge alcohol drinking during adolescence has long-term effects on the adult brain that alter brain structure and behaviors, but the underlying mechanisms remain poorly understood. Extracellular signal-regulated kinase (ERK) is involved in the synaptic plasticity and pathological brain injury by regulating the expression of cyclic adenosine monophosphate response element binding protein (CREB) and brain-derived neurotrophic factor (BDNF). Dual-specificity phosphatase 6 (DUSP6) is a critical effector that dephosphorylates ERK1/2 to control the basal tone, amplitude, and duration of ERK signaling. To explore DUSP6 as a regulator of ERK signaling in the mPFC and its impact on long-term effects of alcohol, a male mouse model of adolescent intermittent alcohol (AIA) exposure was established. Behavioral experiments showed that AIA did not affect anxiety-like behavior or sociability in adulthood, but significantly damaged new object recognition and social recognition memory. Molecular studies further found that AIA reduced the levels of pERK-pCREB-BDNF-PSD95/NR2A involved in synaptic plasticity, while DUSP6 was significantly increased. Intra-mPFC infusion of AAV-DUSP6-shRNA restored the dendritic spine density and postsynaptic density thickness by reversing the level of p-ERK and its downstream molecular expression, and ultimately repaired adult cognitive impairment caused by chronic alcohol exposure during adolescence. These findings indicate that AIA exposure inhibits ERK-CREB-BDNF-PSD95/NR2A by increasing DUSP6 in the mPFC in adulthood that may be associated with long-lasting cognitive deficits. [ABSTRACT FROM AUTHOR]

Sluggish transfer kinetics caused by solid–solid contact at the lithium (Li)/solid-state electrolyte (SE) interface is an inherent drawback of all-solid-state Li metal batteries (ASSLMBs) that not only limits the cell power density but also induces uneven Li deposition as well as high levels of interfacial stress that deteriorates the internal structure and cycling stability of ASSLMBs. Herein, a fast Li+ transfer scaffold is proposed to overcome the sluggish kinetics at the Li/SE interface in ASSLMBs using an α-MnO2-decorated carbon paper (CP) structure (α-MnO2@CP). At an atomic scale, the tunnel structure of α-MnO2 exhibits a great ability to facilitate Li+ adsorption and transportation across the inter-structure of α-MnO2@CP, leading to a high critical current density of 3.95 mA cm−2 at the Li/SE interface. Meanwhile, uniform Li deposition can be guided along the skeletons of α-MnO2@CP with minimized volume expansion, significantly improving the structural stability of the Li/SE interface. Based on these advantages, the ASSLMBs using α-MnO2@CP protected the Li anode and can stably cycle up to very high charge/discharge rates of 10C/10C, paving the way for developing high-power ASSLMBs. [ABSTRACT FROM AUTHOR]

Autonomic dysfunction has been observed in Alzheimer's disease (AD); however, the effects of genes involved in AD on the peripheral nervous system are not well understood. Previous studies have shown that presenilin-1 (PSEN1), the catalytic subunit of the gamma secretase (γ-secretase) complex, mutations in which are associated with familial AD function, regulates dendritic growth in hippocampal neurons. In this study, we examined whether the γ-secretase pathway also influences dendritic growth in primary sympathetic neurons. Using immunoblotting and immunocytochemistry, molecules of the γ-secretase complex, PSEN1, PSEN2, PEN2, nicastrin and APH1a, were detected in sympathetic neurons dissociated from embryonic (E20/21) rat sympathetic ganglia. Addition of bone morphogenetic protein-7 (BMP-7), which induces dendrites in these neurons, did not alter expression or localization of γ-secretase complex proteins. BMP-7-induced dendritic growth was inhibited by siRNA knockdown of PSEN1 and by three γ-secretase inhibitors, γ-secretase inhibitor IX (DAPT), LY-411575 and BMS-299897. These effects were specific to dendrites and concentration-dependent and did not alter early downstream pathways of BMP signaling. In summary, our results indicate that γ-secretase activity enhances BMP-7 induced dendritic growth in sympathetic neurons. These findings provide insight into the normal cellular role of the γ-secretase complex in sympathetic neurons.

The Moinui lava flow on the west flank of Mauna Loa, Hawai`i, is a 32-km-long pāhoehoe basalt flow, between 760 and 1500 years old, characterised by the presence of two generations of olivine: 2–5-mm-sized glomerocrystic clusters of equant polyhedral grains, and dendritic plates. Both generations are distributed throughout the flow field from the vent at 3400 m above sea level to the ocean. We mapped roadcut outcrops in detail to investigate the internal geometry and emplacement mechanisms of the flow, and sampled these outcrops to collect quantitative textural data on the two olivine populations in 2D and 3D, with a view to understanding emplacement processes in general, and the factors controlling the growth, transport, and deposition of phenocryst olivine in particular. Roadcut outcrops reveal complex geometries of interconnected tube-fed sheet lobes, with the main control being pre-existing topography: drained tubes with flanking sheet lobes were developed on the seaward slope of the volcano, whereas tumuli were developed on the flat coastal plain topography. The internal architecture of the flow field is consistent with current hypotheses of emplacement by breakout and inflation of flow lobes from tube-fed internal pathways. Concentrations of up to 30% olivine represent settling of the larger size-fraction of the transported load, with no evidence for superimposed effects of flow differentiation.Implied effective viscosities were around 1000 Pa s. The glomerocrystic population was inherited as pre-existing crystal clusters derived from a sub-volcanic chamber, rather than by synneusis (random collision and aggregation) post-eruption, whereas the plate population was probably generated by a burst of nucleation related to degassing and supercooling during the vent eruption. Other than this, there is no evidence for substantial growth of the transported olivines during flow.

IntroductionAnkG, encoded by the ANK3 gene, is a multifunctional scaffold protein with complex isoform expression: the 480 and 270 kDa isoforms have roles at the axon initial segment and node of Ranvier, whereas the 190 kDa isoform (AnkG-190) has an emerging role in the dendritic shaft and spine heads. All isoforms of AnkG undergo palmitoylation, a post-translational modification regulating protein attachment to lipid membranes. However, palmitoylation of AnkG-190 has not been investigated in dendritic spines. The ANK3 gene and altered expression of AnkG proteins are associated with a variety of neuropsychiatric and neurodevelopmental disorders including bipolar disorder and are implicated in the lithium response, a commonly used mood stabilizer for bipolar disorder patients, although the precise mechanisms involved are unknown.ResultHere, we showed that Cys70 palmitoylation stabilizes the localization of AnkG-190 in spine heads and at dendritic plasma membrane nanodomains. Mutation of Cys70 impairs AnkG-190 function in dendritic spines and alters PSD-95 scaffolding. Interestingly, we find that lithium reduces AnkG-190 palmitoylation thereby increasing its mobility in dendritic spines. Finally, we demonstrate that the palmitoyl acyl transferase ZDHHC8, but not ZDHHC5, increases AnkG-190 stability in spine heads and is inhibited by lithium.DiscussionTogether, our data reveal that palmitoylation is critical for AnkG-190 localization and function and a potential ZDHHC8/AnkG-190 mechanism linking AnkG-190 mobility to the neuronal effects of lithium.

Autism Spectrum Disorders (ASDs) are neurodevelopmental disorders (NDDs) in which children display differences in social interaction/communication and repetitive stereotyped behaviors along with variable associated features. Cul3, a gene linked to ASD, encodes CUL3 (CULLIN-3), a protein that serves as a key component of a ubiquitin ligase complex with unclear function in neurons. Cul3 homozygous deletion in mice is embryonic lethal; thus, we examine the role of Cul3 deletion in early synapse development and neuronal morphology in hippocampal primary neuronal cultures. Homozygous deletion of Cul3 significantly decreased dendritic complexity and dendritic length, as well as axon formation. Synaptic spine density significantly increased, mainly in thin and stubby spines along with decreased average spine volume in Cul3 knockouts. Both heterozygous and homozygous knockout of Cul3 caused significant reductions in the density and colocalization of gephyrin/vGAT puncta, providing evidence of decreased inhibitory synapse number, while excitatory synaptic puncta vGulT1/PSD95 density remained unchanged. Based on previous studies implicating elevated caspase-3 after Cul3 deletion, we demonstrated increased caspase-3 in our neuronal cultures and decreased neuronal cell viability. We then examined the efficacy of the caspase-3 inhibitor Z-DEVD-FMK to rescue the decrease in neuronal cell viability, demonstrating reversal of the cell viability phenotype with caspase-3 inhibition. Studies have also implicated caspase-3 in neuronal morphological changes. We found that caspase-3 inhibition largely reversed the dendrite, axon, and spine morphological changes along with the inhibitory synaptic puncta changes. Overall, these data provide additional evidence that Cul3 regulates the formation or maintenance of cell morphology, GABAergic synaptic puncta, and neuronal viability in developing hippocampal neurons in culture. [ABSTRACT FROM AUTHOR]

In all cell types, small EVs, very abundant extracellular vesicles, are generated and accumulated within MVB endocytic cisternae. Upon MVB fusion and exocytosis with the plasma membrane, the EVs are released to the extracellular space. In the central nervous system, the release of neuronal EVs was believed to occur only from the surface of the body and dendrites. About 15 years ago, MVB cisternae and EVs were shown to exist and function at synaptic boutons, the terminals' pre- and post-synaptic structures essential for canonical neurotransmitter release. Recent studies have revealed that synaptic EVs are peculiar in many respects and heterogeneous with respect to other neuronal EVs. The distribution of synaptic EVs and the effect of their specific molecules are found at critical sites of their distribution. The role of synaptic EVs could consist of the modulation of canonical neurotransmitter release or a distinct, non-canonical form of neurotransmission. Additional roles of synaptic EVs are still not completely known. In the future, additional investigations will clarify the role of synaptic EVs in pathology, concerning, for example, circuits, trans-synaptic transmission, diagnosis and the therapy of diseases. [ABSTRACT FROM AUTHOR]

Lithium (Li) metal batteries (LMBs) are deemed as ones of the most promising energy storage devices for next electrification applications. However, the uneven Li electroplating process caused by the diffusion‐limited Li+ transportation at the Li metal surface inherently promotes the formation of dendritic morphology and instable Li interphase, while the sluggish Li+ transfer kinetic can also cause lithiation‐induced stress on the cathode materials suffering from serious structural stability. Herein, a novel electrolyte designing strategy is proposed to accelerate the Li+ transfer by introducing a trace of large organic polar molecules of lithium phytate (LP) without significantly altering the electrolyte structure. The LP molecules can afford a competitive solvent attraction mechanism against the solvated Li+, enhancing both the bulk and interfacial Li+ transfer kinetic, and creating better anode/cathode interfaces to suppress the side reactions, resulting in much improved cycling efficiency of LMBs. Using LP‐based electrolyte, the performance of LMB pouch cell with a practical capacity of ~1.5 Ah can be improved greatly. This strategy opens up a novel electrolyte designing route for reliable LMBs. [ABSTRACT FROM AUTHOR]

The results of studies of hot cracks formed in cast shapes from low-alloy steel G21Mn5 are presented. Macroand microstructural analyses are carried out. Fractography studies of samples cut from castings used in the production of railway freight cars are performed. The criteria used to assess the susceptibility of alloys to hot brittleness are considered. It is shown that the orientation of dendritic crystals affects significantly the formation of hot cracks, and the direction of the dendrite growth is determined by the conditions of heat dissipation, which are influenced in their turn by the geometry of the casting. The phenomenon of coalescence under the conditions of misorientation of neighbor dendrites and its effect on the formation of hot cracks is studied. A modified RDG criterion is suggested, which allows for the influence of the geometry of the cast product on the formation of hot cracks through the angle of misorientation of neighbor crystals. [ABSTRACT FROM AUTHOR]

The zinc finger protein 804A (ZNF804A) and the 5′‐nucleotidase cytosolic II (NT5C2) genes are amongst the first schizophrenia susceptibility genes to have been identified in large‐scale genome‐wide association studies. ZNF804A has been implicated in the regulation of neuronal morphology and is required for activity‐dependent changes to dendritic spines. Conversely, NT5C2 has been shown to regulate 5′ adenosine monophosphate‐activated protein kinase activity and has been implicated in protein synthesis in human neural progenitor cells. Schizophrenia risk genotype is associated with reduced levels of both NT5C2 and ZNF804A in the developing brain, and a yeast two‐hybrid screening suggests that their encoded proteins physically interact. However, it remains unknown whether this interaction also occurs in cortical neurons and whether they could jointly regulate neuronal function. Here, we show that ZNF804A and NT5C2 colocalise and interact in HEK293T cells and that their rodent homologues, ZFP804A and NT5C2, colocalise and form a protein complex in cortical neurons. Knockdown of the Zfp804a or Nt5c2 genes resulted in a redistribution of both proteins, suggesting that both proteins influence the subcellular targeting of each other. The identified interaction between ZNF804A/ZFP804A and NT5C2 suggests a shared biological pathway pertinent to schizophrenia susceptibility within a neuronal cell type thought to be central to the neurobiology of the disorder, providing a better understanding of its genetic landscape. [ABSTRACT FROM AUTHOR]

The occurrence of an internal short circuit caused by lithium dendrite puncturing the separators is a critical safety issue for lithium batteries. While the investigation of dendrite puncturing resistance of commercial polyolefin separators is well-established, nonwoven separators have received fewer relevant studies. Therefore, we assembled lithium-symmetric cells, lithium-sulfur batteries, and lithium-lithium iron phosphate batteries using three commercial nonwoven separators and a homemade micro-fibrillated cellulose nonwoven separator to verify the ability of the nonwoven separator to resist lithium dendrite penetration. The results reveal that even under low current densities, all four types of nonwoven separators are susceptible to dendrite puncturing, leading to both hard short circuits with significant voltage drops, as well as soft short circuits with charging currents or voltage fluctuations. Moreover, the impedance of lithium-symmetric cells is significantly reduced after short circuit, while the charge transfer resistance of lithium-sulfur batteries increases substantially after short circuit. Our findings provide valuable insights for the development of nonwoven separators for use in lithium metal batteries, highlighting the need for further reduction in pore size. [ABSTRACT FROM AUTHOR]