Search

Australia aims to achieve net zero emissions by 2050, with an interim target of reducing emissions to 43% below 2005 levels by 2030. Electrification of industry processes currently reliant on fossil fuels is a necessary step to achieve these emission reduction goals. This study investigates electrification of steam generation relevant to major industrial operations in the southwest of Western Australia using different renewable energy input levels. The designed system incorporates thermal storage to ensure continuous steam generation. The optimized technology mix, including wind, PV, and concentrated solar thermal (CST) systems for each renewable energy input target, is presented. The optimization process also identifies optimal locations for new renewable energy plants. In summary, the optimization tends towards favouring the development of large CST plants near a demand point. This avoids the use of the transmission network by direct use of the CST system for heating of the storage media, to address the costs and efficiency reductions arising from electrical heating, but the scope of CST use is expected to be limited by site constraints. The levelized cost of heat (LCOH) for the studied renewable energy input targets (i.e., 30–90%) ranges from 15.34 to 36.92 AUD/GJ. This is promising for the 30% renewable energy target, as future natural gas prices in Western Australia are likely to match or exceed the expected LCOH. Cost reductions for renewable generation and storage technologies with further implementation at a large scale in the future may result in more competitive LCOH at higher decarbonization levels, but it is likely that additional technologies will be required for cost competitiveness at very high decarbonization levels.

Australia aims to achieve net zero emissions by 2050, with an interim target of reducing emissions to 43% below 2005 levels by 2030. Electrification of industry processes currently reliant on fossil fuels is a necessary step to achieve these emission reduction goals. This study investigates electrification of steam generation relevant to major industrial operations in the southwest of Western Australia using different renewable energy input levels. The designed system incorporates thermal storage to ensure continuous steam generation. The optimized technology mix, including wind, PV, and concentrated solar thermal (CST) systems for each renewable energy input target, is presented. The optimization process also identifies optimal locations for new renewable energy plants. In summary, the optimization tends towards favouring the development of large CST plants near a demand point. This avoids the use of the transmission network by direct use of the CST system for heating of the storage media, to address the costs and efficiency reductions arising from electrical heating, but the scope of CST use is expected to be limited by site constraints. The levelized cost of heat (LCOH) for the studied renewable energy input targets (i.e., 30–90%) ranges from 15.34 to 36.92 AUD/GJ. This is promising for the 30% renewable energy target, as future natural gas prices in Western Australia are likely to match or exceed the expected LCOH. Cost reductions for renewable generation and storage technologies with further implementation at a large scale in the future may result in more competitive LCOH at higher decarbonization levels, but it is likely that additional technologies will be required for cost competitiveness at very high decarbonization levels. [ABSTRACT FROM AUTHOR]

In the context of the current trend, today we are focused on low-carbon energy, so the question of carbon dioxide utilization is very important. Underground storage of carbon dioxide is an important part of carbon capture and storage (CCS) projects and a key technology to reduce emissions of carbon dioxide to the atmosphere. There are currently many carbon dioxide capture projects around the world, but each project has its own specifics. The article discusses the features of carbon dioxide capture in natural geological reservoirs and the principles of carbon dioxide retention in them. An example of some Carbon Capture in a natural geological reservoirs projects are given. The choice of a natural reservoir, the development of a technology for its identification and justification criteria are of key importance for the environmentally sustainable capture of carbon dioxide.

The Goldstrike district in southwest Utah is similar to Carlin-type gold deposits in Nevada that are characterized by sediment-hosted disseminated gold. Suitable structural and stratigraphic conditions facilitated precipitation of gold in arsenian pyrite grains from ascending gold-bearing fluids. This study used ground-based hyperspectral imaging to study a core drilled in the Goldstrike district covering the basal Claron Formation and Callville Limestone. Spectral modeling of absorptions at 2340, 2200, and 500 nm allowed the extraction of calcite, clay minerals, and ferric iron abundances and identification of lithology. This study integrated remote sensing and geochemistry data and identified an optimum stratigraphic combination of limestone above and siliciclastic rocks below in the basal Claron Formation, as well as decarbonatization, argillization, and pyrite oxidation in the Callville Limestone, that are related with gold mineralization. This study shows an example of utilizing ground-based hyperspectral imaging in geological characterization, which can be broadly applied in the determination of mining interests and classification of ore grades. The utilization of this new terrestrial remote sensing technique has great potentials in resource exploration and exploitation.

The Goldstrike district in southwest Utah is similar to Carlin-type gold deposits in Nevada that are characterized by sediment-hosted disseminated gold. Suitable structural and stratigraphic conditions facilitated precipitation of gold in arsenian pyrite grains from ascending gold-bearing fluids. This study used ground-based hyperspectral imaging to study a core drilled in the Goldstrike district covering the basal Claron Formation and Callville Limestone. Spectral modeling of absorptions at 2340, 2200, and 500 nm allowed the extraction of calcite, clay minerals, and ferric iron abundances and identification of lithology. This study integrated remote sensing and geochemistry data and identified an optimum stratigraphic combination of limestone above and siliciclastic rocks below in the basal Claron Formation, as well as decarbonatization, argillization, and pyrite oxidation in the Callville Limestone, that are related with gold mineralization. This study shows an example of utilizing ground-based hyperspectral imaging in geological characterization, which can be broadly applied in the determination of mining interests and classification of ore grades. The utilization of this new terrestrial remote sensing technique has great potentials in resource exploration and exploitation. [ABSTRACT FROM AUTHOR]