Search

Episodic memory, in humans, is the memory most affected by age-related deterioration or the constitution of neurodegenerative pathologies, such as Alzheimer's disease. However, it is unknown whether this relationship is also present in nonhuman animals. Since studies in birds, rats, primates, and dogs have been shown to have episodic-like memory, more studies aiming to improve the present understanding of this relationship in nonhuman animals are important to aid the development of new translational models for neurodegenerative disorders. Knowing that dogs (Canis familiaris) represent a promising experimental model for neurodegenerative disorders, a memory retrieval test was conducted with 90 clinically healthy domestic dogs of different ages, both sexes, and distinct breeds, for the purpose of evaluating episodic-like memory. The present study adapted a test that corroborates episodic memory requirements through incidental codification of experienced events. We performed a test with two exposure phases, with different characteristics between them, so that in the third phase it was necessary to integrate previous experiences in order to achieve success in the test. In our study, it was possible to verify the decline of episodic memory in elderly dogs, even clinically healthy, regardless of the dogs' sex and size. This episodic-like memory decline observed in elderly dogs may be related to the physiological process of aging or preclinical pathological manifestation of cognitive impairment, similar as reported in humans. More studies should be carried out evaluating episodic-like memory in dogs with suspected of canine cognitive dysfunction syndrome in order to better understand the physiological and pathological behavior of this type of memory in canine species., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The use of biodiesel blends with petroleum diesel in vehicular engines demands the evaluation of the possible impacts and effects of the gases emitted from their combustion on the environment. Among studies on these questions, biomonitoring using lichens is a viable alternative, given their interactions with the elements dispersed in the atmosphere, as well as its sensitivity and capacity to retain contaminants. In this study, we analyzed the effects of gas emissions from the combustion of biodiesel mixture with petroleum diesel on Cladonia verticillaris thalli. Samples of the lichen (10 g) were exposed to the gases emitted by the exhaust of the generator engine during the combustion process of biodiesel mixtures to petroleum diesel (7% (B7), 10% (B10), 40% (B40), 50% (B50), and 70% (B70)). At 90 days after exposure, samples were analyzed for n-alkane profiles, thallus morphology, photosynthetic pigment contents, and secondary lichen metabolites (protocetraric and fumarprotocetraric acids). Sets B7 and B10 showed better resistance of the lichen to pollutants. Set B40 showed a high stress evidenced by the chain elongation of n-alkanes structure and high chlorophyll production, presenting high morphological damages when compared to the control sets, B7 and B10. The results showed significant reductions of n-alkanes profiles for mixtures with high concentrations of biodiesel (B50 and B70), as well as decreases in the chlorophyll content. These groups showed an increase in the synthesis of secondary metabolites, corroborating the hypothesis that high concentrations of biodiesel in the mixture with petroleum diesel have greater impacts on the lichen. Schematic model for demonstration of using the lichen Cladonia verticillaris as biomonitor of effects from gas emissions from the combustion of biodiesel blends with petroleum diesel by a stationary engine., (© 2021. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Macro- and microelement determination in chocolate bars by microwave-induced plasma optical emission spectrometry (MIP OES) was evaluated after microwave-assisted sample digestion. Optimization of the sample digestion was carried out, and the recommended conditions were obtained at a temperature of 190 °C, with a digestion time of 40 min and in a mixture constituted by 2.3 mL of nitric acid, 1.0 mL of hydrogen peroxide and 4.7 mL of water. The method was applied in the analysis of chocolate bars, and the concentration ranges of the elements determined were (in mg kg -1 ): Ca (653-3096); Cr (<0.6-2.8); Cu (<0.16-19.5); Fe (<1.6-227); Mg (147-2775); K (3554-8573); Mn (<0.03-25.2); Na (45.6-1095); Ni (3.2-10.2); P (1111-22594) and Zn (4.8-33.3). The association of the proposed microwave-assisted acid digestion with the MIP OES technique was adequate for multi-element determination in chocolate bars for routine analysis., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Introduction: Microchimeric male fetal cells (MFCs) have been associated with systemic lupus erythematosus, and published studies have further correlated MFC with lupus nephritis (LN). In the present study, we evaluated the frequency of MFC in the renal tissue of patients with LN., Methods: Twenty-seven renal biopsies were evaluated: Fourteen were from women with clinical and laboratory findings of LN, and thirteen were from controls. Genomic DNA was extracted from kidney biopsies, and the male fetal DNA was quantified using real-time quantitative polymerase chain reactions for the detection of specific Y chromosome sequences., Results: MFCs were detected in 9 (64%) of 14 of patients with LN, whereas no MFCs were found in the control group (P = 0.0006). No differences in pregnancy history were found between patients with LN and the control group. Significantly higher amounts of MFCs were found in patients with LN with serum creatinine ≤1.5 mg/dl. Furthermore, women with MFCs had significantly better renal function at the time of biopsy (P = 0.03). In contrast, patients with LN without MFCs presented with more severe forms of glomerulonephritis (World Health Organization class IV = 60% and class V = 40%)., Conclusions: Our data indicate a high prevalence of MFCs in renal biopsy specimens from women with LN, suggesting a role for MFCs in the etiology of LN. The present report also provides some evidence that MFCs could have a beneficial effect in this disease.

Objectives: Hand/wrist and dental radiographs are important for osteoporosis analysis in secondary hyperparathyroidism (SHPT). This study evaluated whether a correlation exists between the effects of the disease on the hands and jaws, and investigated the association between osteoporosis progression in the hands and parathyroid hormone (PTH) levels in chronic kidney disease (CKD) patients., Materials and Methods: Four panoramic radiographic parameters (mental index, mandibular cortical index, trabecular bone pattern, and calcification/resorption) and four corresponding hand/wrist radiographic parameters (metacarpal cortical thickness, phalangeal cortical index, trabecular bone pattern, and calcification/resorption) were applied to investigate possible correlation between the effects of SHPT on the jaws and hands/wrists, by Spearman's correlation coefficient. PTH levels and the hand/wrist radiographic parameters were also tested by spearman's correlation coefficient (p < 0.05). The presence of brown tumors, vascular calcifications, and acroosteolysis on the hands was also evaluated., Results: Mandibular cortical index was strongly correlated with the phalangeal cortical index (p = 0.000). Phalangeal cortical index and trabecular bone pattern of hand/wrist correlated with PTH levels (0.002 and 0.000, respectively). Brown tumors occurred in four CKD patients, while both vascular calcifications and acroosteolysis were observed in 19 patients., Conclusion: There is a significant correlation between the morphological changes caused by secondary hyperparathyroidism in hand and jaw bones. The morphological status can be assessed using the mandibular cortical index, besides the phalangeal cortical index. The latter correlates well with parathyroid hormone levels of advanced chronic kidney disease., Clinical Relevance: Panoramic images reveal morphological changes in the jaw bone, indicating likewise changes in the hand/wrist in severe secondary hyperparathyroidism. The severity of the bone changes may be a reflection of the parathyroid hormone levels in advanced chronic kidney disease.

Introduction: Biological age is an important parameter for growth and development assessment. It can be evaluated through the observation of radiographic changes in skeletal maturation of cervical vertebrae., Objective: This study aims to: a) verify if there is correlation between growth curve and the stages of bone age of animals used in laboratories, by evaluating radiographs of the cervical vertebrae; b) correlate these stages with their correspondents in humans., Methods: 35 Wistar rats were evaluated for a period of 160 days, starting at day 22nd (weaning), with cross sections for periodic weighing, length measurement and digital radiography. Radiographs of the cervical vertebrae (C2 and C3) were measured by means of a computer program (Radio IMP). Data were submitted to statistical analysis (ANOVA) and Pearson correlation., Results: Growth spurt was characterized by fast increasing in weight and length. Through ANOVA, differences were observed in the cervical measurements between days 22, 97, 127, 157, 187 and 217 (p <0.001). A high correlation was found between increasing in body length and weight, as well as in cervical vertebrae height (r = 0.86). Increments in concavities of vertebrae were also observed, similar to humans., Conclusions: There is correlation between body growth and maturation of cervical vertebrae in rats. Despite the continuous development of concavities, it was not possible to clearly identify the 5/6 stages as in studies of cervical vertebrae maturation in humans.

Objective: To verify if the reference values of Sleep Apnea cephalometric analysis of North American individuals are similar to the ones of Brazilian individuals presenting no craniofacial anomalies. The study also aimed to identify craniofacial alterations in Obstructive Sleep Apnea-Hypopnea Syndrome (OSAHS) patients in relation to individuals without clinical characteristics of the disease through this cephalometric analysis., Methods: It were used 55 lateral cephalograms consisting of 29 for the control group of adult individuals without clinical characteristics of OSAHS and 26 apneic adults. All radiographs were submitted to Sleep Apnea cephalometric analysis through Radiocef Studio 2.0. The standard values of this analysis were compared, by means of z test, to the ones obtained from the control group and these were compared to values from apneic group through Student's t test., Results: There were no significant differences between values obtained from control group and standard values. On the group of OSAHS patients it was observed a decrease on the dimensions of upper airways and an increase on the soft palate length., Conclusions: The standard values of Sleep Apnea analysis can be used as reference in Brazilian individuals. Besides, through lateral cephalograms it was possible to identify craniofacial alterations in OSAHS patients.

The influence of creatine (Cr) supplementation on cortical and trabecular bone from ovariectomized rats was studied using FT-Raman spectroscopy. The intensity of organic-phase Raman bands was compared to mineral phase ones. Twenty-one female Wistar rats aged 3 months were divided into three groups (n = 7 per group): ovariectomized (OVX), ovariectomized treated with creatine (CRE) and sham-operated (SHAM) groups. Creatine supplementation (300 mg kg(-1) day(-1)) was provided for 8 weeks, starting 12 weeks after ovariectomy. FT-Raman spectroscopy was performed on the right medial femoral mid-shaft (cortical bone) and third lumbar vertebral body (trabecular bone). The integrated intensities of mineral phase (phosphate and carbonate bands at 959 and 1,071 cm(-1), respectively) and organic phase (amide I band at 1,665 cm(-1)) Raman bands were analyzed. The mineral-to-matrix (phosphate/amide I), carbonate-to-phosphate, and carbonate-to-amide I ratios were analyzed to assess bone quality. The phosphate content on trabecular bone was higher in the CRE group than the OVX group (p < 0.05). No significant changes in mineral or organic phases on cortical bone were observed. A radiographic assessment of bone density was encouraging as the same findings were showed by Raman intensity of phosphate from cortical (r(2) = 0.8037) and trabecular bones (r(2) = 0.915). Severe ovariectomy-induced bone loss was confirmed by FT-Raman spectroscopy. The results suggest that the chemical composition of trabecular bone tissue may be positively influenced by Cr supplementation after ovariectomy.

Maxillary antrolithiasis is characterized by masses of tissue of endogenous or exogenous origin that calcify within the maxillary sinuses. Aspergillosis is a fungal disease in which the maxillary sinus is a primary site of infection. Aspergillosis mycetoma, its noninvasive form, is the most prevalent modality of the disease in the maxillary sinuses. In approximately half of the cases reported in the literature, calcification of the fungal mycelia, which later became antroliths, was verified. This article reports a rare case of the accidental discovery of a maxillary antrolith associated with noninvasive aspergillosis in an immunocompetent and asymptomatic 56-year-old woman. The diagnosis and therapeutic procedures used in treating the patient are discussed as well as the probable iatrogenic origin of the fungal pathology.

A phthalylated ion-exchange biopolymer was obtained by adding cellulose to molten phthalic anhydride in a quasi solvent-free procedure. Through this route 2.99+/-0.07 mmolg(-1) of pendant groups containing ester and carboxylic acid moieties were incorporated into the polymeric structure that was characterized by elemental analysis, solid-state carbon nuclear magnetic resonance (CP/MAS), infrared spectroscopy, X-ray diffraction, and thermogravimetry. The chemically modified polysaccharide is able to exchange cations from aqueous solution as demonstrated by batchwise methodology. The data were adjusted to a modified Langmuir equation to give 2.43+/-0.12 and 2.26+/-0.11 mmolg(-1) for divalent cobalt and nickel cations, respectively. The net thermal effects obtained from calorimetric titration measurements were also adjusted to a modified Langmuir equation, and the enthalpy of the interaction was calculated to give endothermic values of 2.11+/-0.28 and 2.50+/-0.31kJmol(-1) for these cations, respectively. The spontaneity of this ion-exchange process is reflected in negative Gibbs energy and with a contribution of positive entropic values. This set of thermodynamic data at the solid-liquid interface suggests a favorable ion-exchange process for this anchored biopolymer for cation exchange from the environment.

Pentane-2,4-dione (acetylacetone) molecules were covalently incorporated under several different conditions to ethylene-1,2-diamine (en)-modified cellulose, using polar solvents or without solvents. The quantitative amount of en incorporated was given from 0.37+/-0.01 to 3.03+/-0.01 mmol of nitrogen per gram of cellulose, depending on the synthetic routes and after Schiff base formation this percentage was reduced by 1.38-6.12%. The synthetic routes indicated that lower solvent volumes produced higher amounts of en incorporation. However, the highest degree of pendant groups on the polymeric cellulose structure was obtained from a solvent-free reaction route. This procedure was applied for synthesizing all Schiff bases, causing a decrease in the amount of nitrogen. The available basic centers on the best covalently bonded biopolymer were investigated for adsorption of divalent copper, cobalt, nickel, and zinc from aqueous solution, with a capacity order of Cu2+ > Co2+ > Ni2+ > Zn2+.

Extracted babassu coconut (Orbignya speciosa) mesocarp (BCM) was applied as a biosorbent for aqueous Blue Remazol R160 (BR 160), Rubi S2G (R S2G), Red Remazol 5R (RR 5), Violet Remazol 5R (VR 5) and Indanthrene Olive Green (IOG) dye solutions. The natural sorbent was processed batchwise while varying several system parameters such as stirring time, pH and temperature. The interactions were assayed with respect to both pseudo-first-order and second-order reaction kinetics, with the latter the more suitable kinetic model. The maximum adsorption was obtained at pH 1.0 for all dyes due to available anionic groups attached to the structures, which can be justified by pH(pzc) 6.7 for the biosorbent BCM. The ability of babassu coconut mesocarp to adsorb dyes gave the order R S2G>VR 5>BR 160>IOG>RR 5, which data were best fit to Freundlich model, but did not well-adjusted for all dyes. The dye/biopolymer interactions at the solid/liquid interface are all spontaneous as given by free Gibbs energy, with exothermic enthalpic values of -26.1, -15.8, -17.8, -15.8 and -23.7 kJ mol(-1) for BR 160, R S2G, RR 5, IOG and VR 5, respectively. In spite of the negative entropic values contribution, the set of thermodynamic data is favorable for all dyes removal. However, the results pointed to the effectiveness of the mesocarp of babassu coconut as a biosorbent for removing textile dyes from aqueous solutions.

Succinylated mercerized cellulose (cell 1) was used to synthesize an anion exchange resin. Cell 1, containing carboxylic acid groups was reacted with triethylenetetramine to introduce amine functionality to this material to obtain cell 2. Cell 2 was reacted with methyl-iodide to quaternize the amine groups from this material to obtain cell 3. Cells 2 and 3 were characterized by mass percent gain, degree of amination and quaternization, FTIR and CHN. Cells 2 and 3 showed degrees of amination and quaternization of 2.8 and 0.9 mmol/g and nitrogen content of 6.07% and 2.13%, respectively. Cell 3 was used for Cr (VI) adsorption studies. Adsorption equilibrium time and optimum pH for Cr (VI) adsorption were found to be 300 min and 3.1, respectively. The Langmuir isotherm was used to model adsorption equilibrium data. The adsorption capacity of cell 3 was found to be 0.829 mmol/g. Kinetic studies showed that the rate of adsorption of Cr (VI) on cell 3 obeyed a pseudo-second-order kinetic model.

Since bovine teeth have been used as substitutes for human teeth in in vitro dental studies, the aim of this study was to compare the radiographic density of bovine teeth with that of human teeth to evaluate their usability for radiographic studies. Thirty bovine and twenty human teeth were cut transversally in 1 millimeter-thick slices. The slices were X-rayed using a digital radiographic system and an intraoral X-ray machine at 65 kVp and 7 mA. The exposure time (0.08 s) and the target-sensor distance (40 cm) were standardized for all the radiographs. The radiographic densities of the enamel, coronal dentin and radicular dentin of each slice were obtained separately using the 'histogram' tool of Adobe Photoshop 7.0 software. The mean radiographic densities of the enamel, coronal dentin and radicular dentin were calculated by the arithmetic mean of the slices of each tooth. One-way ANOVA demonstrated statistically significant differences for the densities of bovine and human enamel (p < 0.05) and for bovine and human coronal dentin (p < 0.05). No statistically significant differences were found for the bovine and human radicular dentin (p > 0.05). Based on the results, the authors concluded that: a) the radiographic density of bovine enamel is significantly higher than that of human enamel; b) the radiodensity of bovine coronal dentin is statistically lower than the radiodensity of human coronal dentin; bovine radicular dentin is also less radiodense than human radicular dentin, although this difference was not statistically significant; c) bovine teeth should be used with care in radiographic in vitro studies.

The aim of this research was to evaluate dental age in 102 patients with Down Syndrome, using panoramic radiographs. A software program developed by the Discipline of Radiology, School of Dentistry of São José dos Campos, São Paulo State University (UNESP), was used. A table of mineralization chronology of permanent teeth among Brazilians conceived by Nicodemo, Moraes and Medici Filho was used within the software. Statistical analysis of the results showed that 70.91% of the males and 61.21% of the females presented advanced dental age. Only 32.09% of the males and 38.79% of the females presented delayed dental age. Regarding the differences between the dental and chronological ages, two thirds of the males and females presented dental age with differences of up to 12 months, which means that they can be considered to be within normal standards, whereas only 18.87% of the males and 10.21% of the females presented dental age outside normal standards, with differences of over 24 months. In conclusion, the majority of the patients with Down Syndrome were considered to be within the normal standards of mineralization chronology.

Aim: To investigate the relationship between divine proportion and facial esthetics in frontal photographs as well as whether any of the 4 ratios for manipulation provide more favorable facial esthetics., Material and Methods: The sample comprised 20 frontal photographs of Caucasian individuals (11 males and 9 females). The photographs were digitized and stored on a compact disk. A photometric analysis was created with 7 facial segments that were measured on Image Tool software and 4 ratios between 2 facial segments calculated using Microsoft Excel. This manipulation led to 5 different photographs of the same individual: one photograph with no manipulation and the others with 1 of the ratios manipulated in the Deformer 2.0 to very close or equal to 1.618. Thereafter, the 5 photographs of all individuals were evaluated by 12 examiners. The examiners selected those photographs that were esthetically more pleasant., Conclusion: After evaluation, a chi-square test revealed a relationship between divine proportion and facial esthetics. Among the ratios selected, R1 and R2 provided more favorable facial esthetics.

This work describes the preparation of new chelating materials derived from sugarcane bagasse for adsorption of heavy metal ions in aqueous solution. The first part of this report deals with the chemical modification of sugarcane bagasse with succinic anhydride. The carboxylic acid functions introduced into the material were used to anchor polyamines, which resulted in two yet unpublished modified sugarcane bagasse materials. The obtained materials were characterized by elemental analysis and infrared spectroscopy (IR). The second part of this reports features the comparative evaluation of the adsorption capacity of the modified sugarcane bagasse materials for Cu(2+), Cd(2+), and Pb(2+) ions in aqueous single metal solution by classical titration. Adsorption isotherms were studied by the Freundlich and Langmuir models.

Cellulose was first modified with thionyl chloride, giving 99% substitution at C6, and then reacted with ethylene-1,2-diamine to produce 6-(2'-aminoethylamino)-6-deoxy-cellulose. From the 8.5% of nitrogen incorporated in the polysaccharide backbone, the amount of ethylene-1,2-diamine anchored per gram of modified cellulose was determined to be 3.03+/-0.01mmol. This chemically immobilized surface was characterized by FTIR, TG, (13)C NMR, and SEM techniques. The available basic nitrogen centers covalently bonded to the biopolymer skeleton were studied for copper, cobalt, nickel, and zinc adsorption from aqueous solutions and the respective thermal adsorption effects were determined by calorimetric titration. The ability to adsorb cations gave a capacity order of Co(2+)>Cu(2+)>Zn(2+)>Ni(2+) with affinities of 1.91+/-0.07, 1.32+/-0.07, 1.31+/-0.02, and 1.08+/-0.04mmol/g, respectively. The net thermal effects obtained from calorimetric titration measurements were adjusted to a modified Langmuir equation and the enthalpy of the interaction was calculated to give the following exothermic values: -20.8+/-0.05, -11.72+/-0.03, -7.32+/-0.01, and -6.27+/-0.02kJ/mol for Co(2+), Cu(2+), Zn(2+), and Ni(2+), respectively. With the exception of the entropic value for copper, the other thermodynamic data for these systems are favorable for cation adsorption from aqueous solutions at the solid/liquid interface, suggesting the use of this anchored biopolymer for cation removal from the environment.

The reproducibility of measurements of alveolar bone loss on radiographs may be a problem on epidemiologic studies, as they are based on comparisons of the diagnosis of various examiners. The aim of the present research paper was to assess the inter- and intra-examiner reproducibility of measurements of the interproximal alveolar bone loss on non-manipulated digital radiographs and after the application of image filters. Five Oral Radiologists measured the distance between the cementoenamel junction (CEJ) to the alveolar crest or to the deepest point of the bony defect on 12 interproximal digital radiographs of molars and bicuspids of a dry human skull. The digital manipulation and the linear measurements were obtained with the Trophy Windows software (Throphy). For each image, six different versions were created: 1) non-manipulated; 2) bright-contrast adjustment; 3) negative; 4) negative with brightness-contrast adjustment; 5) pseudo-colored; 6) pseudo-colored with brightness-contrast adjustment. In order to prevent interpretation bias because of the repetition of measurements, the examiners measured the radiographs in a random sequence. The two-way ANOVA test at 5% level of significance to compare the means of readings of the same operator with each filter indicated p<0.05 for the majority of operators, while the comparison between the mean values of operators using the same filter indicated p>0.05 for all filters. Based on the results, we concluded that linear measurements of interproximal alveolar bone loss on digital radiographs are highly reproducible among examiners. Nevertheless, the application of image filters significantly influenced the degree of intra-examiner reproducibility. Some filters even reduced the reproducibility of intra-examiner readings.

The purpose of this article was to compare the mean value of optical density of four porcelains commonly used for fabrication of inlay/onlay prostheses using direct digital radiograph. The sample consisted of 20 2-mm thick porcelain specimens (measured by digital pachymeter): Empress (Ivoclair), Simbios (Degussa), Vita Omega 900 and Vitadur Alpha (Vita Zahnfabrik). The values of optical density of the specimens were expressed in millimeters aluminum equivalent (mm eq Al). The samples were X-rayed using two charge coupled devices (CCD) - RVG (Trophy) - Visualix (Gendex) and a phosphor plate system - Digora (Soredex). The optical density reading was performed with Image Tool 1.28 in a total of 110 measurements. Statistical analysis showed that there were statistically significant differences in all materials studied (p < 0.05) regardless of the radiographic system used. The highest optical density value was found for Omega 900 (1.8988 mmeqAl - Visualix - Gendex) and the lowest for Vitadur Alpha (0.8647 - Visualix - Gendex). Thus, the material presenting the highest degree of optical density was Omega 900, Empress and Simbios presented intermediate optical density values, Vitadur Alpha presented the lowest value, and the optical density of porcelains was not influenced by the digital radiography systems.

Purpose: To evaluate the accuracy of approximal caries detection comparing enhanced and unenhanced Sidexis CCD-based digital image with Ektaspeed Plus and INSIGHT films., Methods: Fifty-two extracted premolars were imaged under identical standardized geometric and exposure conditions. Four observers, using five points confidence scale, rated 104 approximal surfaces for the presence or absence of carious lesions by means of four image modalities: (1) observer enhanced; (2) unenhanced Sidexis displays; (3) E speed films and (4) F speed film. Histologic sections served as validating criterion for the presence and depth of carious lesions. Diagnostic accuracy was measured as the area beneath the ROC curve., Results: Mean ROC (receiver operating characteristic) curve areas for approximal surfaces were 0.865 (E speed), 0.856 (F speed), 0.816 (unenhanced Sidexis) and 0.776 (observer enhanced). There were no significant differences between unenhanced digital Sidexis and films. Observer enhanced Sidexis images exhibited a statistically significant lower diagnostic accuracy than the film images for two of the observers.

The purpose of this study was to evaluate the influence of ketoprofen on bone repair process in tibiae of rats by means of analysis of the digital optical density. Twenty Wistar rats were assigned to two groups: an untreated control group and a group treated with ketoprofen. The experimental procedures comprised the following stages: general anesthesia, preparation of a unicortical bone defect on the left tibia of each rat, medication with ketoprofen and radiographic examination. Digital radiographic images were acquired using Visualix GX-S-HDI digital sensor and an x-ray equipment. Radiographs were taken at baseline, 7, 14, 21 and 30 days postoperatively and the optical density (OD) was evaluated using the Vix win 1.4 system. The mean values of OD readings were analyzed statistically by ANOVA and Tukey's test with significance level set at á=5%. The control group showed a statistically significant correlation (p=0.001) between time and optical density, while the ketoprofen group exhibited a weak and not statistically significant correlation (p=0.100). The control group presented the smallest OD ratios at days 1 and 7, and the greatest OD ratios at days 14, 21 and 30, with statistically significant difference (p=0.001). There was no significant differences (p=0.100) among the OD ratios in the ketoprofen group, regardless of the evaluation period. The findings of this study suggest that ketoprofen influenced bone repair process because there was an increase in optical density during the first week and delayed new bone formation after the 21st day.

The aim of this paper is to review clinical and laboratory features of this unusual pathology and its complications, indicating transcatheter embolization as a first choice for its management. Our case report is of a seven year-old child, with complex pulmonary arteriovenous fistula of the anterior segment of right superior lobe, which was diagnosed mainly by cintilography and pulmonary angiogram. Clinically she had cyanosis, fatigue with exertion, clubbing of the fingers and polycythemia with low partial pressure of oxygen (PAO2: 68.1 mmHg; Sat O2: 92.4%; Hct: 47.5%; Hb: 16 gr%). She did not have Rendu-Osler-Weber disease. The anatomic structure and localization of the complex fistula was showed by cineangiographic study. We preferred to manage this fistula with transcatheter embolization with a 02 gauge stainless steel coil occluding device (Gianturco-Wallace), as it was single and the patient was too young for sustain surgical trauma and the outcome would be positively satisfactory. After the embolization cyanosis was relieved and we could see normal pulmonary circulation following the point of the pre-existing fistula. We concluded that a judicious assessment by cineangiography could help select the transcatheter embolization procedure as an attractive therapeutic approach instead of surgery.