Search

Heating and cooling in buildings accounts for over 20% of total energy consumption in China. Therefore, it is essential to understand the thermal requirements of building occupants when establishing building energy codes that would save energy while maintaining occupants thermal comfort. This paper introduces the Chinese thermal comfort dataset, established by seven participating institutions under the leadership of Xian University of Architecture and Technology. The dataset comprises 41,977 sets of data collected from 49 cities across five climate zones in China over the past two decades. The raw data underwent careful quality control procedure, including systematic organization, to ensure its reliability. Each dataset contains environmental parameters, occupants subjective responses, building information, and personal information. The dataset has been instrumental in the development of indoor thermal environment evaluation standards and energy codes in China. It can also have broader applications, such as contributing to the international thermal comfort dataset, modeling thermal comfort and adaptive behaviors, investigating regional differences in indoor thermal conditions, and examining occupants thermal comfort responses.

Growth in energy use for indoor cooling tripled between 1990 and 2016 to outpace any other end use in buildings. Part of this energy demand is wasted on excessive cooling of offices, a practice known as overcooling. Overcooling has been attributed to poorly designed or managed air-conditioning systems with thermostats that are often set below recommended comfort temperatures. Prior research has reported lower thermal comfort for women in office buildings, but there is insufficient evidence to explain the reasons for this disparity. We use two large and independent datasets from US buildings to show that office temperatures are less comfortable for women largely due to overcooling. Survey responses show that uncomfortable temperatures are more likely to be cold than hot regardless of season. Crowdsourced data suggests that overcooling is a common problem in warm weather in offices across the US. The associated impacts of this pervasive overcooling on well-being and performance are borne predominantly by women. The problem is likely to increase in the future due to growing demand for cooling in increasingly extreme climates. There is a need to rethink the approach to air-conditioning office buildings in light of this gender inequity caused by overcooling.

In a field study conducted in office settings in Sydney, Australia, background survey and right-here-right-now thermal comfort questionnaires were collected from a sample of office workers. Indoor environmental observations including air temperature, mean radiant temperature, air velocity and relative humidity, were also recorded and matched with each questionnaire according to time and location. During exploratory data analyses we observed that female subjects aged over 40 and 50 or younger registered significantly warmer sensations than other subjects, male and female, from other age ranges. To further explore this phenomenon, the sample of building occupants were classified into two groups – women of perimenopausal age (over 40 and 50 or younger) while the remaining respondents served as a reference group for comparison. Women in the perimenopausal age range demonstrated an increased perception of warmth (p

Research into human thermal perception indoors has focused on ‘neutrality’ under steady-state conditions. Recent interest in thermal alliesthesia has highlighted the hedonic dimension of our thermal world that has been largely overlooked by science. Here, we show the activity of sensory neurons can predict thermal pleasure under dynamic exposures. A numerical model of cutaneous thermoreceptors was applied to skin temperature measurements from 12 human subjects. A random forest model trained on simulated thermoreceptor impulses could classify pleasure responses (F1-score of 67%) with low false positives/negatives (4%). Accuracy increased (83%) when excluding the few extreme (dis)pleasure responses. Validation on an independent dataset confirmed model reliability. This is the first empirical demonstration of the relationship between thermoreceptors and pleasure arising from thermal stimuli. Insights into the neurophysiology of thermal perception can enhance the experience of built environments through designs that promote sensory excitation instead of neutrality.

Thermal comfort standards have suggested a number of physical indices which can be calculated from either building simulations or in situ physical monitoring to assess the long-term thermal comfort of a space. However, the prohibitively high cost of sensor technologies has limited the applications of these physical indices, and their usefulness has never been established using data collected in real buildings. This paper is the first assessment of the six types of existing indices (23 total) found in standards and five types of new indices (36 total) and their correlation with the long-term thermal satisfaction of building occupants. Correlation analyses were based on continuous thermal comfort measurements and post-occupancy evaluation surveys from four air-conditioned office buildings in Sydney, Australia. We found that the majority of existing indices, especially those based on predicted mean vote (PMV) and predicted percentage dissatisfied (PPD) metrics, have a weak correlation with thermal satisfaction. The percentage of time outside a temperature range was the best-performing index from the standards (r=-0.63). A new index based on the percentage of time that daily temperature range is greater than a threshold reported the strongest correlation (r=-0.8) with thermal satisfaction for this dataset. The results suggest that occupants’ long-term thermal comfort is influenced more by pronounced excursions beyond some acceptable temperature range and large variations in daily temperature than the average experience over time. These findings support the use of continuous monitoring technologies for long-term thermal comfort evaluation and inform potential amendments of international thermal comfort standards.

The recent release of the largest database of thermal comfort field studies (ASHRAE Global Thermal Comfort Database II) presents an opportunity to perform a quality assurance exercise on the first generation adaptive comfort standards (ASHRAE 55 and EN15251). The analytical procedure used to develop the ASHRAE 55 adaptive standard was replicated on 60,321 comfort questionnaire records with accompanying measurement data. Results validated the standard's current adaptive comfort model for naturally ventilated buildings, while suggesting several potential nudges relating to the adaptive comfort standards, adaptive comfort theory, and building operational strategies. Adaptive comfort effects were observed in all regions represented in the new global database, but the neutral (comfort) temperatures in the Asian subset trended 1–2°C higher than in Western countries. Moreover, sufficient data allowed the development of an adaptive model for mixed-mode buildings that closely aligned to the naturally ventilated counterpart. We present evidence that adaptive comfort processes are relevant to the occupants of all buildings, including those that are air conditioned, as the thermal environmental exposures driving adaptation occur indoors where we spend most of our time. This suggests significant opportunity to transition air conditioning practice into the adaptive framework by programming synoptic- and seasonal-scale set-point nudging into building automation systems.

Addressing two common challenges for building performance – reducing the carbon footprint attached to the provision of comfortable indoor environments, and improving the health and wellbeing of occupants – requires a more comprehensive understanding of how the indoor environments of buildings are operated. This paper introduces SAMBA, a state-of-the-art monitoring station for continuous, real-time measurements of indoor environmental quality (IEQ) parameters from occupants’ work desks. It combines a hardware solution that integrates a low-cost suite of sensors with a software platform designed to automatically analyse and visualize data for quick interpretation of IEQ performance by non-scientist. In addition to feeding a massive IEQ database for research, the resulting data may be used to better inform the metrological requirements for popular international IEQ rating schemes. This new era of indoor environmental monitoring based upon systems such as SAMBA affords a fundamentally new approach to built environmental field research that holds significant promise to improve building performance and indoor environmental quality and occupant satisfaction, health, wellbeing and performance.

The quality of buildings can be assessed in terms of the indoor air quality, thermal comfort, lighting quality, acoustic comfort afforded the occupants, collectively referred to as Indoor Environmental Quality (IEQ). A major barrier to a more thoroughly representative audit of actual IEQ performance are the expense and complexity of the measurement instrumentation required. Rapid developments in sensor technology in recent years present the opportunity for continuous and pervasive IEQ monitoring to deliver truly representative characterisations of building performance at a modest cost. The last remaining obstacle to realising these developments seems to be a concern about instrument accuracy. In this paper we test the performance of a low-cost IEQ monitoring system (SAMBA) introduced in an earlier paper. Calibration data from 100 devices was analysed to calculate the standard error of the estimate as a measure of equipment accuracy. Those performance specifications were used in a Monte Carlo simulation based on measurements of thermal comfort parameters from 24 office buildings. Performance measures suggests the low-cost system, whilst not as accurate as laboratory equipment, is more than sufficient for building IEQ diagnostics and compliance assessments. Furthermore, the results of the Monte Carlo simulation show that continuous monitoring systems are better at characterising long-term performance than ad hoc measurement strategies using precision equipment. Low-cost pervasive monitoring technologies therefore offer a unique opportunity to improve our quantitative understanding of, and response to, indoor environmental quality issues.

Recognizing the value of open-source research databases in advancing the art and science of HVAC, in 2014 the ASHRAE Global Thermal Comfort Database II project was launched under the leadership of University of California at Berkeley’s Center for the Built Environment and The University of Sydney’s Indoor Environmental Quality (IEQ) Laboratory. The exercise began with a systematic collection and harmonization of raw data from the last two decades of thermal comfort field studies around the world. The ASHRAE Global Thermal Comfort Database II (Comfort Database), now an online, open-source database, includes approximately 81,846 complete sets of objective indoor climatic observations with accompanying “right-here-right-now” subjective evaluations by the building occupants who were exposed to them. The database is intended to support diverse inquiries about thermal comfort in field settings. A simple web-based interface to the database enables filtering on multiple criteria, including building typology, occupancy type, subjects’ demographic variables, subjective thermal comfort states, indoor thermal environmental criteria, calculated comfort indices, environmental control criteria and outdoor meteorological information. Furthermore, a web-based interactive thermal comfort visualization tool has been developed that allows end-users to quickly and interactively explore the data.