Search

Ionic liquids have been suggested as new engineering fluids, namely in the area of heat transfer, as alternatives to current biphenyl and diphenyl oxide, alkylated aromatics and dimethyl polysiloxane oils, which degrade above 200 {\deg}C and pose some environmental problems. Recently, we have proposed 1-ethyl-3-methylimidazolium methanesulfonate, [$C_{2}mim$][$CH_{3}SO_{3}$], as a new heat transfer fluid, because of its thermophysical and toxicological properties. However, there are some interesting points raised in this work, namely the possibility of the existence of liquid metastability below the melting point (303 K) or second order-disorder transitions ($\lambda$-type) before reaching the calorimetric freezing point. This paper analyses in more detail this zone of the phase diagram of the pure fluid, by reporting accurate thermal-conductivity measurements between 278 and 355 K with an estimated uncertainty of 2% at a 95% confidence level. A new value of the melting temperature is also reported, $T_{melt}$ = 307.8 $\pm$ 1 K. Results obtained support liquid metastability behaviour in the solid-phase region and permit the use of this ionic liquid at a heat transfer fluid at temperatures below its melting point. Thermal conductivity models based on Bridgman theory and estimation formulas were also used in this work, failing to predict the experimental data within its uncertainty.

Ionic liquids have proved to be excellent heat transfer fluids and alternatives to common HTFs used in industries for heat exchangers and other heat transfer equipment. However, its industrial utilization depends on the cost per kg of its production, to be competitive for industrial applications with biphenyl and diphenyl oxide, alkylated aromatics, and dimethyl polysiloxane oils, which degrade above 200 {\deg}C and possess some environmental problems. The efficiency of a heat transfer fluid depends on the fundamental thermophysical properties influencing convective heat transfer (density, heat capacity, thermal conductivity, and viscosity), as these properties are necessary to calculate the heat transfer coefficients for different heat exchanger geometries. In Part 1, the thermophysical properties of pure 1-ethyl-3-methylimidazolium methanesulfonate $[C_{2}mim][CH_{3}SO_{3}]$ (CAS no. 145022-45-3), (ECOENG 110), produced by BASF, under the trade name of Basionics ST35, with an assay $\geq$97% with $\leq$0.5% water and $\leq$2% chloride ($Cl^{-}$), were presented, for temperatures slightly below room temperature and up to 355 K. In this paper, we report the thermophysical properties of mixtures of [C2mim][CH3SO3] with water, in the whole concentration range, at $P$ = 0.1 MPa. The properties measured were density and speed of sound (293.15 < $T$/K < 343.15), viscosity, electrical and thermal conductivities, refractive index (293.15 < $T$/K < 353.15), and infinite dilution diffusion coefficient of the ionic liquid in water (298.15 K).