Search

In apple (Malus domestica), the level and timing of crop load have a major impact on the final fruit size and can also play a role in optimising internal fruit quality. Ideal crop loads vary with cultivar, but very few cultivars have recommended crop load targets that consider the effect of crop load on both return bloom and fruit quality. To address this issue, studies examining a range of crop loads and thinning times were undertaken on several apple cultivars. Return bloom and multiple fruit quality parameters were examined. The results of these studies demonstrate positive effects for early thinning, not only on fruit size but also on firmness and soluble solids content. Early-thinned fruit showed higher sugar levels than late-thinned fruit. Previously undemonstrated positive relationships between fruit sugar content and weight and between fruit firmness and weight in both 'Fuji' and 'Delicious', as well as between fruit sugar content and fruit firmness in 'Delicious', indicate that early thinning is a valuable tool in improving fruit quality. The current target crop load recommendations of 4–6 fruit cm−2 trunk cross-sectional area (TCSA) for 'Fuji' and 2–4 fruit cm−2 TCSA for 'Delicious' are confirmed by this study. New recommendations are proposed for the other cultivars in this study taking into account the impact of crop load on both fruit quality and return bloom. Both 'Pink Lady' and 'Gala' can support crop loads of up to eight fruit cm−2 TCSA without impacting return bloom, but fruit quality is compromised; hence, lower targets in the range of 4–6 fruit cm−2 TCSA are recommended. Large fruit size and good return bloom can be maintained in 'Jonagold' at crop loads of eight fruit cm−2 TCSA, while crop loads of four fruit cm−2 TCSA are suggested for 'Braeburn' to sustain regular bearing and good fruit size. [ABSTRACT FROM AUTHOR]

Multistep chemical thinning programs have been widely recommended in the eastern United States; however, adoption of bloom thinners is limited. With caustic blossom thinners, narrow effective application timings and concerns related to spring frost damage are barriers for commercial use in this region. If effective and safe, use of hormonal blossom thinners for apple would be an attractive alternative. We evaluated the effects and interactions of bloom thinners [6-benzyladenine (BA) and lime sulfur (LS, or calcium polysulfide) + stylet oil (LS+SO)] and a postbloom thinner (NAA) in the context of a multistep, carbaryl-free thinning program across three locations. Experiments were conducted in 2017 and 2018 on mature ‘Gala’ in North Carolina, Massachusetts, and Pennsylvania, USA. In four of six studies, BA at bloom increased the efficacy of postbloom NAA and reduced crop density (P < 0.08). Postbloom NAA generally increased fruit relative growth rate (RGR) and reduced crop density. However, where NAA failed to reduce crop load, there was a negative influence on RGR. BA and LS+SO increased RGR in one of six studies; however, BA was generally ineffective as a blossom thinner, whereas LS+SO was more effective. Nevertheless, BA applied at bloom may have utility as part of a multistep thinning program. As a part of a multistep thinning program, BA applied at bloom may be useful in increasing efficacy of postbloom applications, particularly when use of caustic blossom thinners is not permitted. [ABSTRACT FROM AUTHOR]

Chemical thinning, the most common and cost-effective thinning method, is conducted during early apple fruit development over a 3- to 4-week period using multiple applications of plant growth regulators. It is critical to provide apple growers with tools to assess the efficacy of chemical thinners quickly and accurately because visible responses are not apparent for up to 2 weeks after application. The objective of this study was to build a model to predict apple fruitlet abscission following a chemical thinner application with in situ reflectance data obtained with a portable visible and near infrared (Vis/NIR) spectrophotometer. Developed models were compared with the currently available fruitlet growth model (FGM). ‘Honeycrisp’ fruitlet diameter and reflectance were measured on dates around a chemical thinner application across a 2-year period. After June drop, measured fruitlets were determined to have either persisted or abscised. Random forest, partial least squares regression, and XGBoost classification models were used to predict fruitlet abscission from reflectance data. Each classification model was developed with 2021, 2022, and combined 2021 + 2022 data. For each dataset, 5-fold cross validation was used to assess three model performance metrics: 1) overall accuracy, 2) recall, and 3) specificity. Datasets tested were either unbalanced, majority class down-sampled, or minority class up-sampled with synthetic minority oversampling technique. In both years, the FGM reliably estimated chemical thinner efficacy 9 days after application. Before this time point, the FGM had low prediction accuracy of the minority class in both years—persisting fruitlets in 2021 and abscising fruitlets in 2022. For reflectance spectroscopy, the developed random forest models that were balanced with synthetic minority over-sampling technique were found to be the best combination in predicting chemical thinner efficacy. The combined 2021 + 2022 dataset overall model accuracy ranged from 84% the day before to 93% at 9 days after thinner application. These results show that Vis/NIR is a promising tool to predict chemical thinner efficacy. This technology had high prediction accuracies over a range of fruitlet abscission potential and two growing seasons. Further development and testing of the model over cultivars, chemical thinner timings, and growing regions would facilitate commercialization of the technology.

Apple (Malus ×domestica L. Borkh.) growers need tools to predict the efficacy of chemical thinners that are applied to induce fruitlet abscission to aid in crop load management decisions. Recently, reflectance spectroscopy-based models to predict fruitlet abscission rates were developed. Using spectroscopy, persisting fruitlets had lower reflectance in the red-light (~600 nm) and near infrared (~950 nm) regions than abscising fruitlets. The goal of this study was to better understand how reflectance models distinguished between fruitlets that ultimately persisted or abscised. Individual models for the difference and ratio of each combination of wavelengths were developed to identify key wavelengths for abscission prediction from reflectance models. Accuracy for wavelength difference and ratio models was improved for all model prediction dates when reflectance (R) from R640-675 was subtracted from or divided by R675-696. This spectra region indicates differences in chlorophyll content between persisting and abscising fruitlets. Calculation of the chlorophyll concentration index (R522-579:R640-700) from nondestructively measured spectra supported this result. Chlorophyll concentration index was higher for fruitlets that ultimately persisted than abscised fruitlets (P < 0.01) for all measurement dates -1 to 9 days after thinner (DAT) in both years, except -1 DAT in 2021 (P = 0.468). Plant water index (R950-970:R890-900) was lower for persisting than abscising fruitlets for 3 to 9 DAT in 2021 (P < 0.001) and on -1 (P < 0.01) and 9 DAT (P < 0.001) in 2022. The relationship of fruit size and plant pigment (anthocyanins or chlorophyll) content in fruitlets to reflectance spectra between persisting and abscising fruitlets was also followed. Fruitlet persistence or abscission was predicted from developed models for destructively sampled fruitlets using measured reflectance spectra. Whole-fruit chlorophyll content was numerically higher in fruitlets predicted to persist than abscise for all collection dates. Higher total chlorophyll was correlated to a larger fruit size in persisting than abscising fruitlets. This higher chlorophyll content led to a lower reflectance of red light and was a key factor in model development. These results indicate that chlorophyll and water content can distinguish physiological parameters between persisting and abscising fruitlets. [ABSTRACT FROM AUTHOR]

Chemical thinning, the most common and cost-effective thinning method, is conducted during early apple fruit development over a 3- to 4-week period using multiple applications of plant growth regulators. It is critical to provide apple growers with tools to assess the efficacy of chemical thinners quickly and accurately because visible responses are not apparent for up to 2 weeks after application. The objective of this study was to build a model to predict apple fruitlet abscission following a chemical thinner application with in situ reflectance data obtained with a portable visible and near infrared (Vis/NIR) spectrophotometer. Developed models were compared with the currently available fruitlet growth model (FGM). 'Honeycrisp' fruitlet diameter and reflectance were measured on dates around a chemical thinner application across a 2-year period. After June drop, measured fruitlets were determined to have either persisted or abscised. Random forest, partial least squares regression, and XGBoost classification models were used to predict fruitlet abscission from reflectance data. Each classification model was developed with 2021, 2022, and combined 2021 + 2022 data. For each dataset, 5-fold cross validation was used to assess three model performance metrics: 1) overall accuracy, 2) recall, and 3) specificity. Datasets tested were either unbalanced, majority class downsampled, or minority class up-sampled with synthetic minority oversampling technique. In both years, the FGM reliably estimated chemical thinner efficacy 9 days after application. Before this time point, the FGM had low prediction accuracy of the minority class in both years--persisting fruitlets in 2021 and abscising fruitlets in 2022. For reflectance spectroscopy, the developed random forest models that were balanced with synthetic minority over-sampling technique were found to be the best combination in predicting chemical thinner efficacy. The combined 2021 + 2022 dataset overall model accuracy ranged from 84% the day before to 93% at 9 days after thinner application. These results show that Vis/NIR is a promising tool to predict chemical thinner efficacy. This technology had high prediction accuracies over a range of fruitlet abscission potential and two growing seasons. Further development and testing of the model over cultivars, chemical thinner timings, and growing regions would facilitate commercialization of the technology. [ABSTRACT FROM AUTHOR]

Multistep chemical thinning programs have been widely recommended in the eastern United States; however, adoption of bloom thinners is limited. With caustic blossom thinners, narrow effective application timings and concerns related to spring frost damage are barriers for commercial use in this region. If effective and safe, use of hormonal blossom thinners for apple would be an attractive alternative. We evaluated the effects and interactions of bloom thinners [6-benzyladenine (BA) and lime sulfur (LS, or calcium polysulfide) + stylet oil (LS+SO)] and a postbloom thinner (NAA) in the context of a multistep, carbaryl-free thinning program across three locations. Experiments were conducted in 2017 and 2018 on mature ‘Gala’ in North Carolina, Massachusetts, and Pennsylvania, USA. In four of six studies, BA at bloom increased the efficacy of postbloom NAA and reduced crop density (P < 0.08). Postbloom NAA generally increased fruit relative growth rate (RGR) and reduced crop density. However, where NAA failed to reduce crop load, there was a negative influence on RGR. BA and LS+SO increased RGR in one of six studies; however, BA was generally ineffective as a blossom thinner, whereas LS+SO was more effective. Nevertheless, BA applied at bloom may have utility as part of a multistep thinning program. As a part of a multistep thinning program, BA applied at bloom may be useful in increasing efficacy of postbloom applications, particularly when use of caustic blossom thinners is not permitted.

Apples grown often produce more fruit, but they are characterised by heavy bloom and fruit set, which results in undersized, poorly coloured, and low-quality apples. The optimal crop load, which is a quantitative measure, results in a steady annual yield and marketable fruit. Winter pruning technique, chemical thinning, hand thinning, mechanical thinning, and artificial spur extinction (ASE) are several crop load management techniques that all work together to improve return bloom and boost high-quality fruit production in apple, especially in high-density plantations. An overview of current studies to regulate apple crop load via apple-producing regions is provided in the article. In high-density apple orchards, this will help in determining the best crop load management strategies. [ABSTRACT FROM AUTHOR]

Apple (Malus ×domestica) growers can incur significant economic losses when fruit drop before they can be harvested [preharvest fruit drop (PFD)]. In some years and cultivars, more than 30% of potential yield can be lost. Growers frequently apply plant bioregulators to reduce PFD, either via delay in maturity [aminoethoxyvinylglycine (AVG), 1-methylcycolpropene] or via inhibition in production of cell hydrolysis enzymes in the fruit pedicel [naphthalene acetic acid (NAA)]. Finding a physiological indicator of PFD would allow growers to assess the susceptibility of fruit to PFD. Due to its lignification, xylem is believed to be the last tissue to break down in the fruit pedicel, leading to PFD. To determine whether loss in xylem functionality can be used as an indicator of PFD potential, studies were conducted in 2020 and 2021 with ‘Red Delicious’ treated with AVG (132 µL·L−1), NAA (10 µL·L−1), and an ethylene-producing compound [ethephon (150 µL·L−1 in 2020, 200 µL·L−1 in 2021)] to generate a range of PFD potentials. Xylem functionality was assessed in the fruit cortex. Internal ethylene content (IEC), fruit maturity indices, and PFD rates were quantified weekly throughout the harvest period. Expression of genes encoding for cell hydrolysis enzymes (MdEG1 and MdPG2) was quantified to relate xylem functionality to fruit abscission mechanisms. In 2020 and 2021, AVG reduced PFD compared with the untreated control by decreasing IEC. Although ethephon did not result in higher PFD than untreated fruit, NAA reduced PFD in 2020 but not 2021. For all treatments in both years, there was a linear decrease in xylem functionality throughout the measurement period. Cumulative PFD exponentially decreased as xylem functionality neared zero and the climacteric rise in ethylene began. Concurrent with the rise in IEC and PFD was an increase in the expression of MdEG1 and MdPG2 in the fruit pedicel of the control compared with AVG-treated fruit. AVG-treated fruit lost xylem functionality at a similar rate to the untreated control but had lower expression of MdEG1 and MdPG2. These results indicate that xylem functionality is not a sole direct indicator of PFD. The concurrent increase in PFD and expression of MdEG1/MdPG2 supports previous research indicating that these two genes may serve as potential markers for PFD.

Biennial bearing has long been a challenge for perennial tree fruit production. Some cultivars are more susceptible and can have excessive bloom and fruit set in one year followed by insufficient bloom and fruit set in the next year. Although crop load management can be used to reduce biennial bearing, optimum crop loads in one year can still sometimes be followed by high variability in return bloom the next. Moreover, the fundamental mechanisms that drive this behavior are poorly understood. The two primary hypotheses of biennial bearing consider hormonal control and resource competition for carbohydrates and nutrients. Through reviewing the current literature and gaining a better understanding of carbohydrate and hormone cycling/signaling within trees, a framework for biennial bearing control can be developed. With an understanding of the physiological responses contributing to biennial bearing patterns, manipulation of carbohydrate and nutrient cycling within trees through management practices may influence flowering and fruit bud formation. Improved management practices of biennial bearing can be evaluated and adjusted to suit different planting systems and species. • Fundamental mechanisms driving biennial bearing are poorly understood. • Biennial bearing is controlled by a complex of carbohydrate and hormone levels. • Improved biennial-bearing management practices need to be developed. • Key gaps in knowledge lie in the field of carbohydrate assimilation and translocation. • Manipulation of carbohydrate and nutrient cycling may influence flower bud formation. [ABSTRACT FROM AUTHOR]

Green fruit thinning is one of the most important operations in apple production for obtaining high-quality fruit. Manual thinning is time-intensive, making it impractical for large orchards. Some alternative methods, such as chemical and mechanical thinning, have greatly improved work efficiency, but both methods have drawbacks due to non-selective targeting. Robotic green fruit thinning can potentially be as selective as manual thinning. This study developed an effective end-effector for robotic green fruit thinning. Prior to designing the end-effector, a series of fruit removal dynamics tests were conducted to determine the forces required for robotic thinning using pulling or stem-cutting methods on three different apple cultivars. The overall mean forces for pulling detachment were 24.78-0.48 N and 19.91-0.55 N when detaching stem from the fruit-end and the spur-end, respectively. The average force required for stem-cutting was 33.6-8.0 N among the three cultivars. No significant differences were found between the fruit or stem dimensions and the force required for fruit removal. A stem-cutting end-effector prototype was then developed to conduct fruit removal experiments in field conditions. Two end-effector prototype configurations were tested: one placing the end-effector on a handheld bar, and the other integrating the end-effector with a six DoF robotic manipulator. The success rates of green fruit removal for all endeffector prototype experiments were over 90%. The end-effector is a core component of an automated green fruit thinning system. Integration with the robotic manipulator also indicated the potential of a robotic green fruit system to remove fruit at different locations and orientations. A machine vision system will be developed and integrated with the end-effector to develop a robotic green fruit thinning system. [ABSTRACT FROM AUTHOR]

Blossom thinning can confer significant benefits to apple growers, including increased fruit size and annual bearing. However, current blossom thinning practices can damage spur leaves and/or fruit. We evaluated the use of short duration forced heated air treatments [thermal shock (TS)] as a blossom thinning strategy for ‘York Imperial’. Using a variable-temperature heat gun, TS treatments were applied to solitary blossoms 24 hours after pollination. Effects of output temperature (five levels) and treatment duration (four levels) were evaluated using a completely randomized design with a factorial treatment structure. Short duration treatments (0.5 and 1.0 seconds) were ineffective for arresting pollen tube growth in vivo. TS temperature required to inhibit stylar pollen tube growth was inconsistent across years. In 2014, TS temperatures ≥56 °C inhibited pollen tubes from reaching the style base at 2.0 and 4.0 second durations. However, in 2015, TS temperatures ≥81 °C at 4.0 seconds prevented pollen tubes from reaching the style base. Inconsistent effects of TS across years were attributed to treatments being applied too late due to optimal conditions for pollen tube growth during the intervening 24-hour period after pollination. Excessive injury to spur leaf tissue was observed at temperatures higher than 84 °C and 70 °C (2.0 and 4.0 seconds, respectively). Pollen tube growth was reduced or arrested at temperature and duration combinations that caused minimal visible injury to spur leaves. Identifying and exploiting structural differences between apple blossoms and vegetative spur leaves may provide insight for the future development of TS or other attempts at developing selective thinning technologies.

The use of short-duration applications of thermal energy (thermal shock; TS) as an apple blossom thinning strategy was investigated. Effects of TS temperature and timing on stigmatic receptivity, pollen tube growth in vivo, and visible leaf injury were evaluated in multiple experiments on ‘Crimson Gala’. TS treatments were applied to blossoms and spur leaves using a variable temperature heat gun. TS temperatures ≥86 °C had a strong inhibitory effect on pollen tube growth on the stigmatic surface and in the style. TS temperatures >79 °C reduced average pollen tube length to less than the average style length. Timing of TS treatment (0 or 24 hours after pollination) was not an influential factor, indicating that effective TS temperatures reduced pollen tube growth up to 24 hours after the pollination event. The onset of thermal injury to vegetative tissues occurred at similar TS temperatures that inhibited pollen tube growth in vivo. Excessive leaf injury (>33%) was observed at 95 °C, suggesting relatively narrow differences in thermal sensitivity between reproductive and vegetative tissues. Inconsistent TS temperatures and/or responses were observed in some experiments. Ambient air temperature may have influenced heat gun output temperatures and/or plant susceptibility. While results suggest some promise, additional work is required to validate and further develop this concept.

Abstract Metamitron is a relatively new postbloom thinning compound for pome fruits that inhibits the photosystem II (PS II) pathway of photosynthesis. Reduced assimilation of carbohydrate by metamitron action may lead to a carbohydrate deficit that promotes fruit abscission. We have evaluated the thinning efficacy of metamitron rate and, to a limited extent, application timing for ‘Bartlett’ pear in five separate trials over 3 years (2015–17) in northern Oregon. Comparisons were made to a nontreated control and, depending on the trial, a commercial standard thinning compound [benzyladenine (6-BA) or abscisic acid (ABA)]. Application timings ranged between 7- and 16-mm fruit diameter depending on the trial. Metamitron markedly inhibited photosynthesis (PN), typically for a duration of 2 to 3 weeks, although longer persistence was observed in two trials. Generally, PN was reduced linearly with increasing metamitron rate, but the effect varied by rate and year and may have been enhanced by high temperatures. Metamitron effectively thinned in four of five trials whereby pear fruit set was negatively and linearly related to rate. Rates of 200 to 300 ppm were efficacious and produced target crop loads. In only one trial, increasing concentrations (600 ppm) led to greater thinning. Metamitron significantly thinned ‘Bartlett’ pears when applied between 10 and 13 mm. In contrast, early application timing (≈7 mm) had little effect on fruit abscission. Fruit size increased with decreasing crop load and thus was significantly improved by metamitron. Interaction between biological and environmental factors likely contributed to year-to-year variability in efficacy.

In the eastern USA and several other apple-growing regions, apple blossom thinning using lime sulfur is a relatively new crop load management strategy. This study sought to evaluate how application timing of lime sulfur + stylet oil blossom thinning sprays would influence thinning efficacy and crop safety of ‘Gala’ apples. This project occurred at two locations in the USA, Winchester, Virginia, and Mills River, North Carolina, during the 2019 growing season. Two main timing strategies were assessed: (1) model-guided sprays with the pollen tube growth model (PTGM), (2) fixed spray intervals with the first spray applied at a specified percentage of open bloom (20% vs. 80%), and the second spray applied at a reapplication interval (48 h vs. 72 h). Model-guided and 20% open bloom + 48-h treatments reduced fruit set and increased fruit weight, diameter, and length at both sites. Treatments with a delayed first spray at 80% open bloom or a more extended second reapplication of 72 h were generally ineffective. There was no conclusive evidence that lime sulfur + stylet oil blossom thinning spray timing influenced russet incidence/severity or leaf phytotoxicity. This study demonstrated that effective and safe blossom thinning can be obtained from applying two sprays at 20% open bloom and 48 h thereafter or using the PTGM. [ABSTRACT FROM AUTHOR]

The use of short-duration applications of thermal energy (thermal shock; TS) as an apple blossom thinning strategy was investigated. Effects of TS temperature and timing on stigmatic receptivity, pollen tube growth in vivo, and visible leaf injury were evaluated in multiple experiments on 'Crimson Gala'. TS treatments were applied to blossoms and spur leaves using a variable temperature heat gun. TS temperatures ≥86 °C had a strong inhibitory effect on pollen tube growth on the stigmatic surface and in the style. TS temperatures >79 °C reduced average pollen tube length to less than the average style length. Timing of TS treatment (0 or 24 hours after pollination) was not an influential factor, indicating that effective TS temperatures reduced pollen tube growth up to 24 hours after the pollination event. The onset of thermal injury to vegetative tissues occurred at similar TS temperatures that inhibited pollen tube growth in vivo. Excessive leaf injury (>33%) was observed at 95 °C, suggesting relatively narrow differences in thermal sensitivity between reproductive and vegetative tissues. Inconsistent TS temperatures and/or responses were observed in some experiments. Ambient air temperature may have influenced heat gun output temperatures and/or plant susceptibility. While results suggest some promise, additional work is required to validate and further develop this concept. [ABSTRACT FROM AUTHOR]

Blossom thinning can confer significant benefits to apple growers, including increased fruit size and annual bearing. However, current blossom thinning practices can damage spur leaves and/or fruit. We evaluated the use of short duration forced heated air treatments [thermal shock (TS)] as a blossom thinning strategy for 'York Imperial'. Using a variable-temperature heat gun, TS treatments were applied to solitary blossoms 24 hours after pollination. Effects of output temperature (five levels) and treatment duration (four levels) were evaluated using a completely randomized design with a factorial treatment structure. Short duration treatments (0.5 and 1.0 seconds) were ineffective for arresting pollen tube growth in vivo. TS temperature required to inhibit stylar pollen tube growth was inconsistent across years. In 2014, TS temperatures ≥56 °C inhibited pollen tubes from reaching the style base at 2.0 and 4.0 second durations. However, in 2015, TS temperatures ≥81 °C at 4.0 seconds prevented pollen tubes from reaching the style base. Inconsistent effects of TS across years were attributed to treatments being applied too late due to optimal conditions for pollen tube growth during the intervening 24-hour period after pollination. Excessive injury to spur leaf tissue was observed at temperatures higher than 84 °C and 70 °C (2.0 and 4.0 seconds, respectively). Pollen tube growth was reduced or arrested at temperature and duration combinations that caused minimal visible injury to spur leaves. Identifying and exploiting structural differences between apple blossoms and vegetative spur leaves may provide insight for the future development of TS or other attempts at developing selective thinning technologies. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Plant Science is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Metamitron is a relatively new postbloom thinning compound for pome fruits that inhibits the photosystem II (PS II) pathway of photosynthesis. Reduced assimilation of carbohydrate by metamitron action may lead to a carbohydrate deficit that promotes fruit abscission. We have evaluated the thinning efficacy of metamitron rate and, to a limited extent, application timing for 'Bartlett' pear in five separate trials over 3 years (2015-17) in northern Oregon. Comparisons were made to a nontreated control and, depending on the trial, a commercial standard thinning compound [benzyladenine (6-BA) or abscisic acid (ABA)]. Application timings ranged between 7- and 16-mm fruit diameter depending on the trial. Metamitron markedly inhibited photosynthesis (PN), typically for a duration of 2 to 3 weeks, although longer persistence was observed in two trials. Generally, PN was reduced linearly with increasing metamitron rate, but the effect varied by rate and year and may have been enhanced by high temperatures. Metamitron effectively thinned in four of five trials whereby pear fruit set was negatively and linearly related to rate. Rates of 200 to 300 ppm were efficacious and produced target crop loads. In only one trial, increasing concentrations (600 ppm) led to greater thinning. Metamitron significantly thinned 'Bartlett' pears when applied between 10 and 13 mm. In contrast, early application timing (...7 mm) had little effect on fruit abscission. Fruit size increased with decreasing crop load and thus was significantly improved by metamitron. Interaction between biological and environmental factors likely contributed to year-to-year variability in efficacy. [ABSTRACT FROM AUTHOR]

In the eastern USA and several other apple-growing regions, apple blossom thinning using lime sulfur is a relatively new crop load management strategy. This study sought to evaluate how application timing of lime sulfur + stylet oil blossom thinning sprays would influence thinning efficacy and crop safety of ‘Gala’ apples. This project occurred at two locations in the USA, Winchester, Virginia, and Mills River, North Carolina, during the 2019 growing season. Two main timing strategies were assessed: (1) model-guided sprays with the pollen tube growth model (PTGM), (2) fixed spray intervals with the first spray applied at a specified percentage of open bloom (20% vs. 80%), and the second spray applied at a reapplication interval (48 h vs. 72 h). Model-guided and 20% open bloom + 48-h treatments reduced fruit set and increased fruit weight, diameter, and length at both sites. Treatments with a delayed first spray at 80% open bloom or a more extended second reapplication of 72 h were generally ineffective. There was no conclusive evidence that lime sulfur + stylet oil blossom thinning spray timing influenced russet incidence/severity or leaf phytotoxicity. This study demonstrated that effective and safe blossom thinning can be obtained from applying two sprays at 20% open bloom and 48 h thereafter or using the PTGM.

Reducing apple crop load during bloom can increase fruit size and promote annual bearing when compared with crop reduction at later timings. In this study, we compared the efficacy of chemical blossom-thinning strategies on 'Golden Delicious' and 'Gala' apple trees. Several blossom-thinning treatments were evaluated, including 1) unthinned control (control), 2) hand-thinned (HT) at bloom, 3) liquid lime sulfur + Stylet- Oil (LS + SO), 4) ammonium thiosulfate (ATS), 5) endothall (ET), and 6) naphthaleneacetamide (NAD). Chemical treatments were applied twice during bloom, using a predictive model to determine application timings. Blossom thinner effects on pollen tube growth, fruit set, and yield responses were evaluated. LS + SO and ATS reduced the number of pollen tubes that entered the style for 'Golden Delicious' by 75%and 63%, respectively. ET and NAD did not affect the number of pollen tubes that entered the style. In one of 2 years, LS + SO resulted in a near-ideal crop load and increased fruit weight. ATS was effective in reducing initial fruit set in 'Golden Delicious' and 'Gala', but did not reduce whole-tree crop density. ET reduced crop load in all experiments but caused excessive spur leaf injury and negatively affected fruit size of 'Gala' but not 'Golden Delicious'. NAD had limited efficacy on 'Golden Delicious' at the concentrations and application timings used in this trial. When used as the sole method of crop load management, none of the chemistries evaluated over-thinned or increased fruit injury. However, ET caused excessive thinning when evaluated as part of a commercial crop load management program on 'Gala'. Of the products evaluated, LS + SO provided the best overall thinning response. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Plant Science is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Thinning is a critical but challenging practice in apple production, especially for organic producers. The objective of this experiment was to determine if exclusion netting, used to manage insect pests and stress, could reduce fruit set and thinning requirements of ‘Gala’ and ‘Honeycrisp’ apple trees in Michigan and Washington, U.S.A., respectively. Nets were closed around whole canopies at different timings based on a predetermined percentage of open flowers. In 2017 and 2018, netted trees set a full commercial crop regardless of percentage of open bloom at the time of netting, including prebloom enclosures. Fruit set and yield of netted ‘Honeycrisp’ trees were significantly lower than non-netted, nonthinned controls but similar to non-netted hand-thinned controls. ‘Gala’ fruit set and yield did not differ among treatments. Exclusion netting markedly reduced the number of mature seeds and increased the number of nonfertilized seeds in both cultivars. Pollinator exclusion to ‘Gala’ in a frost year increased parthenocarpic fruit set two-fold compared to non-netted trees. Fruit size, shape, and quality attributes of ‘Gala’ were were similar among treatments, but ‘Honeycrisp’ fruit were significantly smaller than hand-thinned, non-netted controls. Netting may constitute an alternative, viable strategy to manage fruit set but requires testing on different cultivars.

Recently, relatively large amounts of pesticides have been used to control diseases and pests in modern apple production. Our investigations were aimed to estimate the effects of sustainable plant protection system and integrated apple-growing technology on apple fruit quality. The research was carried out in 2011-2013 with apple cultivars 'Auksis', 'Alva', 'Connell Red', 'Ligol', 'Lodel', 'Rubin' and 'Šampion'. Sustainable plant protection system based on the internet supported forecasting system iMETOS®sm. According to the rules of the sustainable plant protection system, plant protection products with the same active ingredients were used not more than twice, and preharvest interval was 1.5 times longer than indicated on the product label. Plant protection products labelled as "very toxic" and "toxic" were not used. Scab susceptible cultivars 'Alva' and 'Ligol' on average were sprayed twelve times when other cultivars - nine times. Sustainable plant protection system did not guarantee total scab control; therefore, damaged fruits should be thinned manually. High-quality fruit yield was on average 39 t ha-1, but the yield of 'Šampion' and 'Ligol' reached 51-56 t ha-1. The 59% of all investigated cultivars fruits were 70-80 mm in diameter, and 30% of fruits - more than 85 mm. All tested cultivars had averaged low index of biennial bearing 0.11-0.34. [ABSTRACT FROM AUTHOR]

Biennial bearing is a common problem encountered in perennial fruit crops. In order to determine a suitable crop load for sustainable development of dryland apple orchards, we defined the concept of “appropriate productivity” and examined five crop load levels in an apple orchard ecosystem on the Loess Plateau, in Changwu, Shaanxi province, China. The orchards were planted with Fuji apple ( Malus domestica Borkh.) trees on M. sieversii rootstock since 1996. Crop load was limited to 53–54 (I), 67–68 (II), 80–81 (III), 94–95 (IV), and 107–108 (V) fruit per tree, using flower and fruit thinning by hand. Volumetric soil water content, total nutrient (N, P, and K) contents of branches, and economic benefit were then analyzed under each treatment over a 5-year period. Soil water content was found to be closely related to rainfall, with three seasonal periods recognized annually. Average water content in 2009–2013 ranked treatment II (21.98%) > III (21.57%) > I (20.61%) > IV (20.31%) > V (20.11%), in which treatments II and III were significantly higher than other treatments. With increasing soil depth, the water content showed an “increasing-decreasing-increasing” trend, with the highest value tending to occur within a depth of 40–100 cm. The nutrient contents of branches under treatments I–III were good and trees showed strong resistance to apple Valsa canker. From an economic perspective, the percentage of high-quality fruit increased as did the economic benefits in treatments I–III. In conclusion, controlling fruit crop load effectively reduced fluctuations in production, increased the economic benefits, and maintained the health of the orchard ecosystem. The appropriate crop load level for mature apple orchards in the gully region of the Loess Plateau was deemed to be 67–81 fruit per tree. [ABSTRACT FROM AUTHOR]

Control of regular cropping in apple is considered critical for fruit growers to ensure their economical sustainability. Irregular flowering can be mitigated by plant growth regulators thanks to their promotion or inhibition effects. In this study, responses of GA4+7and ethephon on alternate bearing in ‘Golden Delicious’/M9 were examined. GA4+7and ethephon were applied on the same trees during three consecutive years (2010–12). Flowering, yield, shoot growth, and also some fruit quality parameters were assessed. GA4+7appeared to be more effectual to regulate alternate bearing. The alternate bearing index calculated with yield in successive years was high in control (0.91), moderate in ethephon (0.71), and low in GA4+7treated trees (0.41). Modified alternate bearing index, based on cluster number, indicated moderate intensity in GA4+7(0.53) and high intensity in the others. Although GA4+7reduced crop density at about 50%, there was little variation in yield per tree and crop efficiency due to increasing of fruit size. GA4+7did not increase shot length after establishment of equilibrium between vegetative and generative growth in 2012. Ethephon slightly reduced vegetative growth and relatively increased fruit size due to the decrease of fruit set. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Plant Science is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Highlights: [•] Mechanical blossom thinning and hand blossom thinning were compared for peach. [•] Both methods removed flowers and decreased fruit set with increasing rates. [•] Reductions in labour requirements were observed in both treatment years. [•] Mechanical blossom thinning appears to be an effective thinning strategy for peach. [ABSTRACT FROM AUTHOR]

The objectives of this experiment were to test the efficacy of a mechanical string thinner (Darwin PT-250; Fruit-Tec, Deggenhauserertal, Germany) on apple and to identify an optimal range of thinning severity as influenced by spindle rotation speed. Trials were conducted in 2010 and 2011 at the Pennsylvania State University Fruit Research and Extension Center in Biglerville, PA, on five-year-old 'Buckeye Gala'/M.9 apple trees that were trained to tall spindle. A preliminary trail on five-year-old 'Cripps Pink'/M.9 was conducted to determine the relationship between string number and thinning severity. As the number of strings increased, the level of thinning severity increased. A range of spindle speeds (0 to 300 rpm) was applied to the same trees for two consecutive years. As spindle speed increased, blossom density (blossom clusters per limb cross-sectional area) was reduced as was the number of blossoms per spur. In 2010, leaf area per spur was reduced 9% to 45%. In 2011, the fastest spindle speed reduced leaf area per spur 20%. Although increased spindle speed reduced cropload, injury to spur leaves may have inhibited increases in fruit size. The largest gain in fruit weight was 28 g (300 rpm) compared with the control. In both years, the most severe thinning treatments reduced yield by more than 50%. There was no relationship between spindle speed and return bloom. Severe thinning treatments (240 to 300 rpm) caused significant reductions in spur leaf area, yield, and fruit calcium and did not improve fruit size or return bloom. Spindle speeds of 180 and 210 rpm provided the best overall thinning response and minimized injury to spur leaves, but cropload reduction was insufficient in years of heavy fruit set. Therefore, mechanical blossom thinning treatments should be supplemented with other thinning methods. Mechanical string thinning may be a viable treatment in organic apple production, where use of chemical thinners is limited. [ABSTRACT FROM AUTHOR]

The risk of spreading fire blight in apples after mechanical thinning with a rotating string blossom thinner was evaluated in field and potted-tree experiments. In the field experiment, using the mechanical thinner on noninoculated trees immediately after operating the equipment on inoculated trees significantly (P < 0.01) increased fire blight incidence resulting in 90 ± 20.01 (mean ± SE) infected shoots compared with 23.5 ± 8.97 diseased shoots in similar trees that were not thinned mechanically. A similar result was obtained in greenhouse experiments whereby healthy apple plants positioned adjacent diseased plants before the group was subjected to the mechanical thinner developed more than twice the number of infected shoots as that on similar plants that were not thinned. These results indicate that under conditions conducive to infection, the mechanical blossom thinner significantly increases the risk of spreading Erwinia amylovora. The use of the thinner should therefore be limited to orchards with no history of disease in the last 3 years and on days when predicted weather is not suitable for tree infection by E. amylovora; otherwise, a severe fire blight epidemic could develop in the orchard. [ABSTRACT FROM AUTHOR]

This paper reports on the potential of gibberellic acid (GA3 and GA4+7) to reduce sweet cherry (Prunus avium L.) floral bud induction and balance fruit number and improve fruit quality in the season following application. In 2003, GA3 was applied to 'Bing'/'Gisela 1' trees at 50 and 100 mg-L-1 at the end of stage I of fruit development, end of stage 11, and on both dates. These treatments were compared to the industry standard application of 30 mg⋅L-1 applied at the end of stage II and an untreated control. Fruit quality was evaluated in the year of application (i.e., nontarget crop) and return bloom, fruit yield and quality were assessed in the subsequent season (2004). In 2003, GA3 delayed fruit maturity proportional to rate. In 2004, bloom density and fruit yield were related negatively and linearly to GA3 concentration. GA3 reduced the number of reproductive buds per spur and did not affect the number of flowers per reproductive bud. Nonspur flowering at the base of 1-year-old shoots was more inhibited by GA3 than flowering on spurs. Double applications significantly reduced bloom density and yield versus single applications. Trees treated with two applications of 50 and 100 mg-L-1 yielded fruit with 7% and 12% higher soluble solids, 15% and 20% higher firmness, and 7% and 14% greater weight, respectively. However, no treatment improved crop value per tree. In a separate isomer trial, GA3 and GA4-7 were applied to 'Bing'/'Gisela 1' trees at 100 and 200 mg⋅L-1 at both the end of stage I and II in 2004. GA3 and GA4+7 applied at 100 mg⋅L-1 reduced bloom density similarly by 65%. GA3 was more inhibiting than GA4+7 at 200 mg⋅L-1, reducing bloom density by 92% versus 68%. We observed a 4- to 5- day delay in flowering from both GA formulations at 200 mg⋅L-1. At both concentrations, GA3 reduced yield by 71% and 95% versus 34% and 37% reduction by GA4+7. Fruit weight and soluble solids were unaffected but fruit firmness was increased by all treatments (6% to 17%). However, crop value per tree was highest from untreated control because improvements in fruit quality were insufficient to offset reductions in yield. GA3 shows potential as a novel crop load management tool in productive 'Bing' sweet cherry orchard systems. [ABSTRACT FROM AUTHOR]

Thinning is a critical but challenging practice in apple production, especially for organic producers. The objective of this experiment was to determine if exclusion netting, used to manage insect pests and stress, could reduce fruit set and thinning requirements of 'Gala' and 'Honeycrisp' apple trees in Michigan and Washington, U.S.A., respectively. Nets were closed around whole canopies at different timings based on a predetermined percentage of open flowers. In 2017 and 2018, netted trees set a full commercial crop regardless of percentage of open bloom at the time of netting, including prebloom enclosures. Fruit set and yield of netted 'Honeycrisp' trees were significantly lower than non-netted, nonthinned controls but similar to non-netted hand-thinned controls. 'Gala' fruit set and yield did not differ among treatments. Exclusion netting markedly reduced the number of mature seeds and increased the number of nonfertilized seeds in both cultivars. Pollinator exclusion to 'Gala' in a frost year increased parthenocarpic fruit set two-fold compared to non-netted trees. Fruit size, shape, and quality attributes of 'Gala' were were similar among treatments, but 'Honeycrisp' fruit were significantly smaller than hand-thinned, non-netted controls. Netting may constitute an alternative, viable strategy to manage fruit set but requires testing on different cultivars. [ABSTRACT FROM AUTHOR]