Search

Developments in sensor equipment and the Internet of Things increasingly allow production facilities to be monitored and controlled remotely and in real-time. Organizations can exploit these opportunities to reduce costs and improve reliability by employing condition-based maintenance (CBM) policies. Another recently proposed option is to adopt condition-based production (CBP) policies that control the deterioration of equipment by dynamically adapting the production rate. This study compares their performance and introduces a fully dynamic condition-based maintenance and production (CBMP) policy that integrates both policies. Numerical results show that their cost-effectiveness strongly depends on system characteristics such as the planning time for maintenance, the cost of corrective maintenance, and the rate and volatility of the deterioration process. Integrating condition-based production decisions into a condition-based maintenance policy substantially reduces the failure risk, while fewer maintenance actions are performed. Interestingly, in some situations, the combination of condition-dependent production and maintenance even yields higher cost savings than the sum of their separate cost savings. Moreover, particularly condition-based production is able to cope with incorrect specifications of the deterioration process. Overall, there is much to be gained by making the production rate condition dependent, also, and sometimes even more so, if maintenance is already condition-based. • We compare condition-based maintenance (CBM) with condition-based production (CBP). • CBP controls deterioration of the system by dynamically adjusting the production rate. • Condition-based maintenance is most effective for high revenue systems. • Condition-based production is most effective when failures are expensive. • CBM and CBP can enhance each other's cost savings performance. [ABSTRACT FROM AUTHOR]

This study explains about a serial smart production system where a single-type of product is produced. This system uses an unequally sized batch policy in subsequent stages. The setup cost is not always deterministic, it can be controllable and reduced by increasing the capital investment cost, and that the production rates in the system may vary within given limits across batches of shipments. Furthermore, as imperfect items are produced in long-run system, to clean the imperfectness autonomation policy is adopted for inspection, which make the process smarter. The shipment lot sizes of the deliveries are unequal and variable. In long-run production system, defective items are produced in "out-of-control" state. In this model, the defect rate is random with a uniform distribution which is clean from the system by autonomation. In addition, in the remanufacturing process, it is assuming that all defective products are repaired, and no defective products are scrapped. The main theme of developing this model is to determine the number of shipments and the optimal production lot size to adjust the production rates and decrease the total system cost under a reduced setup cost by considering the discrete investment and make a serial smart production system. A solution procedure along with an advanced algorithm was proposed for solving the model. Numerical examples with some graphical representations are provided to validate the model. [ABSTRACT FROM AUTHOR]

Expensive power cost is a significant concern in today's manufacturing world. Reduction in energy consumption is an ultimate measure towards achieving manufacturing efficiency and emissions control. In the existing literature of scheduling problems, the consumption of energy is considered uncertain under the dimensions of uncertain demand and supply. In reality, it is a random parameter that also depends on production capacity, manufacturing technology, and operational condition of the manufacturing system. As the unit production cost varies with production rate and reliability of the manufacturing system, the energy consumption of the system also varies accordingly. Therefore, this study investigated an unreliable manufacturing system under stochastic production capacities and energy consumption. A stochastic production–inventory policy is developed to optimize production quantity, production rate, and manufacturing reliability under variable energy consumption costs. As energy consumption varies in different operational states of manufacturing, we consider three specific states of power consumption, namely working, idle, and repair time, for an integrated production–maintenance model. The considered production system is subjected to stochastic failure and repair time, where productivity and manufacturing reliability is improved through additional technology investment. The robustness of the model is shown through numerical example, comparative study, and sensitivity analysis of model parameters. Several graphical illustrations are also provided to obtain meaningful managerial insights. [ABSTRACT FROM AUTHOR]

A smart production system is essential to produce complex products under the consumption of efficient energy. The main ramification of controllable production rate, amount of production size, and safety stocks is simultaneously optimized under proper utilization of energy within a smart production system with a random breakdown of spare parts. Due to the random breakdown, a greater amount of energy may be used. For this purpose, this study is concerned about the optimum safety stock level under the exact amount of energy utilization. For random breakdown, there are three cases as production inventory meets the demand without utilization of the safety stock, with using of the safety stock, and consumed the total safety stock amount and facing shortages. After the random breakdown time, the smart production system may move to an out-of-control state and may produce defective items, where the production rate of defective items is a random variable, which follows an exponential distribution. The total cost is highly nonlinear and cannot be solved by any classical optimization technique. A mathematical optimization tool is utilized to test the model. Numerical study proves that the effect of energy plays an important role for the smart manufacturing system even though random breakdowns are there. it is found that the controllable production rate under the effect of the optimum energy consumption really effects significantly in the minimization cost. It saves cost regarding the corrective and preventive maintenance cost. The amount of safety stock can have more support under the effect of optimum energy utilization. The energy can be replaced by the solar energy. [ABSTRACT FROM AUTHOR]