Search

Abstract In the era of cloud service popularization, the trustworthiness of service is particularly important. If users cannot prevent the potential trustworthiness problem of the service during long-term use, once the trustworthiness problem occurs, it will cause significant losses. In order to objectively assess the cloud service trustworthiness, and predict its change, this paper establishes a special hierarchical model of cloud service trustworthiness attributes. This paper proposes corresponding management countermeasures around the model, defines the cloud service trustworthiness level, defines the cloud service trusted state based on fuzzy entropy and Markov chain, constructs the membership function of the cloud service trusted state, and realizes the assessment of cloud service trustworthiness and its changes according to the prediction method of Markov chain. Through case analysis and method comparison, it shows that the method proposed in this paper is effective and feasible. This method can provide objective and comprehensive assessment data for the cloud service trustworthiness and its change, makes up the deficiency of fuzzy entropy assessment method. This research has important reference value and significance for the research of cloud service trustworthiness assessment.

To balance the tradeoff between quality of service (QoS) and operating expenditure (OPEX), the service provider should request the appropriate amount of resources to the cloud operator based on the estimated variation of service requests. This paper proposes a popularity-aware service provisioning framework (PASPF), which leverages the network data analytics function (NWDAF) to obtain analytics on service popularity variations. These analytics estimate the congestion level and list of top services contributing most of the traffic change. Based on the analytics, PASPF enables the service provider to request the appropriate amount of resources for each service for the next time period to the cloud operator. To minimize the OPEX of the service provider while keeping the average response time of the services below their requirements, we formulate a constrained Markov decision process (CMDP) problem. The optimal stochastic policy can be obtained by converting the CMDP model into a linear programming (LP) model. Evaluation results demonstrate that the PASPF can achieve less than 50 % OPEX of the service provider compared to a popularity-non-aware scheme while keeping the average response time of the services below the requirement. [ABSTRACT FROM AUTHOR]

BACKGROUND: Incubators, especially the ones for babies, require continuous monitoring for anomaly detection and taking action when necessary. OBJECTIVE: This study aims to introduce a system in which important information such as temperature, humidity and gas values being tracked from incubator environment continuously in real-time. METHOD: Multiple sensors, a microcontroller, a transmission module, a cloud server, a mobile application, and a Web application were integrated Data were made accessible to the duty personnel both remotely via Wi-Fi and in the range of the sensors via Bluetooth Low Energy technologies. In addition, potential emergencies were detected and alarm notifications were created utilising a machine learning algorithm. The mobile application receiving the data from the sensors via Bluetooth was designed such a way that it stores the data internally in case of Internet disruption, and transfers the data when the connection is restored. RESULTS: The obtained results reveal that a neural network structure with sensor measurements from the last hour gives the best prediction for the next hour measurement. CONCLUSION: The affordable hardware and software used in this system make it beneficial, especially in the health sector, in which the close monitoring of baby incubators is vitally important. [ABSTRACT FROM AUTHOR]

The immense volume of online content linked to digital libraries has given emergence to the advancement of screening and recommendation systems. A recommendation system is vitally important in both academic institutions and elibraries to assist professors, instructors, students, and researchers in finding appropriate sources of information. Distributed or collaborative screening is the most common method used in current recommendation systems. However, collaborative approaches cannot promote library repositories, including unrated or unpurchased electronic information. Thus, this paper deals with the automated classification and recommendation of a multiclass corpus found in virtual repositories (cloud databases). In various stages, Neuro-Fuzzy (NF) and Support Vector Machine (SVM) techniques are used as the base classifiers for the categorization of the essential subjects (contents). Later, a high-level ensemble learning strategy is utilized to recommend appropriate subjects from the available multiclass corpus. The methods use a CoC (Coherence of Content)-based inference mechanism to extract and filter the critical components before beginning the recommendation process. Experiments demonstrated that a recommended approach based on detailed conceptual descriptions instead of a handful of phrases/words might help academic and research communities to find relevant sources. Observing the results over a period of months shows that the suggested method increases user comfort, proving the system's acceptability to users in this way. In addition, compared to previous models, the accuracy in categorizing the requisite subjects is more than 97.16 per cent. [ABSTRACT FROM AUTHOR]

AbstractIn order to facilitate diverse computing resources and services, cloud computing has evolve into a promising paradigm on-demand over the internet. To access services, cloud users have to rely on third-party service providers. Choosing a suitable Cloud Service Provider (CSP) with a raise in available cloud services in order to deliver the service safely is considered a serious concern for users. Regrettably, there are various problems that minimize the growth of cloud computing, like privacy, security loss, and control. The security issue is regarded as the most important element that could avoid the evolution of cloud computing. In the cloud environment, to handle the user’s requests, trust measures play a significant role when choosing appropriate service providers. Therefore, trustworthiness evaluation of CSP prior to choosing it to facilitate the service has become a significant obligation in cloud environment. In this work, a trust model, Deep Behavioral Feedback Quality of Service and Statistics based trust (Deep BFQS-trust), is developed to calculate trustworthiness of CSP based on its feedback and behavior, QoS and statistics-based given by the users. Also, to calculate behavioral trust values, various QoS attributes are considered. In order to maintain and calculate feedback trust value for service provider, diverse parameters from service level agreement are utilized. By computing the collective trust, trustworthiness of cloud service provider is judged that is computed by these trust factors. Moreover, the weights of the collective trust are determined by employing Deep belief network (DBN) model. Finally, the proposed Deep BFQS-trust technique is compared with the existing approaches, and exhibits that the proposed model attained utmost trustworthiness and successful interaction with the values of 0.860 and 0.888, respectively. [ABSTRACT FROM AUTHOR]

Abstract Water is the most basic need for humans and a source of livelihood for humans. Lack of human awareness to maintain water quality, causing water to become polluted, by both industrial and household waste, impacts on human health and material loss. Thus, it is important to create technology that can monitor water pollution automatically and quickly. This research aims to create a system which utilizes the Internet of Things (IoT) technology that can facilitate quality of water by measuring parameters such as pH and turbidity. The methodology of the system progresses by the usage of a controller which is ATmega328P-AU, pH sensor to measure acidity, turbidity sensor to measure turbidity level, LPWAN LoRa works like a communication of data transmission as well as cloud service, namely Antares, to store data that are sent via Android. Based on the outcomes, the proposed system has achieved a reliable accuracy with percentage error of 99.73% in pH sensor and 99.41% in the turbidity sensor. Also, 2.6 s is the average required time to deliver the results to the cloud service.

To solve the privacy-preserving problem of both the user and the server in indoor positioning, outsourcing part of the calculation to cloud server in the process of using Paillier encryption was considered.The scheme not only protected the privacy of the user and the positioning server, but also avoided excessive computing and communication overhead.The main idea of the scheme was that the fingerprint database in the offline stage was established by the server firstly.The k-anonymity algorithm was combined with Paillier encryption in the online stage by the user, and the encrypted Wi-Fi fingerprints were sent to the positioning server.An aggregation of the received Wi-Fi fingerprints and database fingerprints were performed by the server.Then they were outsourced to the cloud server for decryption and distance calculation by the positioning server.Finally, the positioning result was obtained.Theoretical analysis and experimental results show that the proposed scheme is safe, effective and practical.

Water is the most basic need for humans and a source of livelihood for humans. Lack of human awareness to maintain water quality, causing water to become polluted, by both industrial and household waste, impacts on human health and material loss. Thus, it is important to create technology that can monitor water pollution automatically and quickly. This research aims to create a system which utilizes the Internet of Things (IoT) technology that can facilitate quality of water by measuring parameters such as pH and turbidity. The methodology of the system progresses by the usage of a controller which is ATmega328P-AU, pH sensor to measure acidity, turbidity sensor to measure turbidity level, LPWAN LoRa works like a communication of data transmission as well as cloud service, namely Antares, to store data that are sent via Android. Based on the outcomes, the proposed system has achieved a reliable accuracy with percentage error of 99.73% in pH sensor and 99.41% in the turbidity sensor. Also, 2.6 s is the average required time to deliver the results to the cloud service. [ABSTRACT FROM AUTHOR]

Many cloud services are relying on distributed key-value stores such as ZooKeeper, Cassandra, HBase, etc. However, distributed key-value stores are notoriously difficult to design and implement without any mistakes. Because data consistency is the contract for clients that defines what the correct values to read are for a given history of operations under a specific consistency model, consistency violations can confuse client applications by showing invalid values. As a result, serious consequences such as data loss, data corruption, and unexpected behavior of client applications can occur. Software bugs are one of main reasons why consistency violations may occur. Formal verification techniques may be used to make designs correct and minimize the risks of having bugs in the implementation. However, formal verification is not a panacea due to limitations such as the cost of verification, inability to verify existing implementations, and human errors involved. Implementation-level model checking has been heavily explored by researchers for the past decades to formally verify whether the underlying implementation of distributed systems have bugs or not. Nevertheless, previous proposals are limited because their invariant checking is not versatile enough to check for the wide spectrum of consistency models, from eventual consistency to strong consistency. In this work, consistency oracles are employed for consistency invariant checking that can be used by implementation-level model checkers to formally verify data consistency model implementations of distributed key-value stores. To integrate consistency oracles with implementation-level distributed system model checkers, the partial-order information obtained via API is leveraged to avoid the exhaustive search during consistency invariant checking. Our evaluation results show that, by using the proposed method for consistency invariant checking, our prototype model checker, VConMC, can detect consistency violations caused by several real-world software bugs in a well-known distributed key-value store, ZooKeeper. [ABSTRACT FROM AUTHOR]

To solve the privacy-preserving problem of both the user and the server in indoor positioning, outsourcing part of the calculation to cloud server in the process of using Paillier encryption was considered. The scheme not only protected the privacy of the user and the positioning server, but also avoided excessive computing and communication overhead. The main idea of the scheme was that the fingerprint database in the offline stage was established by the server firstly. The k-anonymity algorithm was combined with Paillier encryption in the online stage by the user, and the encrypted Wi-Fi fingerprints were sent to the positioning server. An aggregation of the received Wi-Fi fingerprints and database fingerprints were performed by the server. Then they were outsourced to the cloud server for decryption and distance calculation by the positioning server. Finally, the positioning result was obtained. Theoretical analysis and experimental results show that the proposed scheme is safe, effective and practical. [ABSTRACT FROM AUTHOR]

This study addresses significant challenges within the field of remote sensing monitoring, including operational inefficiency, data confidentiality concerns, high hardware costs, and issues with data management and distribution. To tackle these problems, we introduce a synergistic remote sensing monitoring framework that leverages a bimodal cloud infrastructure, facilitated by cloud services to provide on-demand resource allocation and efficient management. Our research focuses on designing and developing an integrated operating system that optimizes remote sensing monitoring processes and enhances operational efficiency through the use of a mutual scheduling mechanism and rapid data indexing capabilities. The system is underpinned by a dual-state cloud service mechanism, combining the Memory Cloud (Flash Cloud) known for its high-speed data processing and the Storage Cloud (Persistent Cloud) for long-term data retention. This dual-state approach establishes a multi-level caching system to ensure quick access to frequently requested spatial data. Additionally, a two-tier security system is implemented to safeguard data integrity and confidentiality. Our “YunYao” geographic information service rendering engine, operating on this dual-state cloud platform, demonstrated remarkable performance advantages over mainstream platforms in identical testing environments. Specifically, it outperformed ArcGIS Desktop by over two times, exceeded GeoServer by more than four times, and was over seven times faster than ArcGIS Server in rendering speeds. Experimental and practical applications have shown that our system streamlines routine workflows and enhances work efficiency, making it a critical reference for remote sensing monitoring. Furthermore, a comparative analysis was conducted to quantitatively demonstrate the superior performance of our method in handling large volumes of remote sensing data(Including satellite imagery and UAV imagery). Despite these advancements, the integration of cloud service technology in the field of satellite remote sensing requires further development, particularly regarding the establishment of private clouds and the internal collaborative computing mechanisms within the remote sensing domain. Our research paves the way for future advancements and the eventual full integration of cloud service models into remote sensing monitoring.

To balance the tradeoff between quality of service (QoS) and operating expenditure (OPEX), the service provider should request the appropriate amount of resources to the cloud operator based on the estimated variation of service requests. This paper proposes a popularity-aware service provisioning framework (PASPF), which leverages the network data analytics function (NWDAF) to obtain analytics on service popularity variations. These analytics estimate the congestion level and list of top services contributing most of the traffic change. Based on the analytics, PASPF enables the service provider to request the appropriate amount of resources for each service for the next time period to the cloud operator. To minimize the OPEX of the service provider while keeping the average response time of the services below their requirements, we formulate a constrained Markov decision process (CMDP) problem. The optimal stochastic policy can be obtained by converting the CMDP model into a linear programming (LP) model. Evaluation results demonstrate that the PASPF can achieve less than 50% OPEX of the service provider compared to a popularity-non-aware scheme while keeping the average response time of the services below the requirement.

Personalized quality of service （QoS） prediction is crucial for developing high-quality cloud service system.However, the traditional collaborative filtering method, based on centralized training, presents challenges in protecting user privacy.In order to effectively protect user privacy while obtaining highly accurate prediction effect, a distributed user privacy adjustable personalized QoS prediction model for cloud services （DUPPA） was proposed.The model adopted a “server-multi-user” architecture, in which the server coordinated multiple users, handled multiple users’ requests for uploading model gradients and downloading global model, and maintained global model parameters.To further protect user privacy, a user privacy adjustment strategy was proposed to balance privacy and prediction accuracy by adjusting the initialization proportion of local model parameters and gradient upload proportion.In the local model initialization stage, the user calculated the difference matrix between the local model and the global model, and selected the global model parameters corresponding to the larger elements in the difference matrix to initialize the local model parameters.In the gradient upload stage, the user can select some important gradients to upload to the server to meet the privacy protection requirements of different application scenarios.To evaluate the privacy degree of DUPPA, a data reconstruction attack method was proposed for the distributed matrix factorization model gradient sharing scheme.The experimental results show that when DUPPA sets the gradient upload proportion to 0.1 and the local model parameter initialization proportion to 0.5, the predicted MAE and RMSE are reduced by 1.27% and 0.91%, respectively, compared with the traditional centralized matrix factorization model.Besides, when DUPPA sets the gradient upload proportion to 0.1, the privacy degree is 5 times higher than when the gradient upload proportion is 1.And when DUPPA sets the local model parameter initialization proportion to 0.5, the privacy degree is 3.44 times higher than when the local model parameter initialization proportion is 1.

Abstract Many currently existing cloud cost optimisation solutions are aimed at cloud infrastructure providers, and they often deal only with specific types of application services. Unlike infrastructure providers, the providers of cloud applications are often left without a suitable cost optimisation solution, especially concerning the wide range of different application types. This paper presents an approach that aims to provide an optimisation solution for the providers of applications hosted in the cloud environments, applicable at the early phase of a cloud application lifecycle and for a wide range of application services. The focus of this research is the development of the method for identifying optimised service deployment option in available cloud environments based on the model of the service and its context, intending to minimise the operational cost of the cloud service while fulfilling the requirements defined by the service level agreement. A cloud application context metamodel is proposed that includes parameters related to both the application service and the cloud infrastructure relevant for the cost and quality of service. By using the proposed optimisation method, knowledge is gained about the effects of the cloud application context parameters on the service cost and quality of service, which is then used to determine the optimal service deployment option. The service models are validated using cloud applications deployed in laboratory conditions, and the optimisation method is validated using the simulations based on the proposed cloud application context metamodel. The experimental results based on two cloud application services demonstrate the ability of the proposed approach to provide relevant information about the impact of cloud application context parameters on service cost and quality of service and use this information for reducing service operational cost while preserving the acceptable service quality level. The results indicate the applicability and relevance of the proposed approach for cloud applications in the early service lifecycle phase since application providers can gain valuable insights regarding service deployment decision without acquiring extensive datasets for the analysis.

It is difficult for users to understand the complex cloud product information for product selection. Using this information to recommend satisfactory cloud products is a challenge. Previous studies focused on similar information of users and products while neglecting relevance; therefore, they could not create recommendation approaches that account for functional dependencies among cloud products. To overcome this challenge, this study proposes a cloud product set recommendation model based on a hierarchical knowledge graph (KG) with a pre-post correlation of product functionality. There are two main contributions: First, we constructed a cloud product functionality and performance KG using the dependency information of layers and entities to represent complicated pre-post logical connections. The KG was designed according to the cloud service model. Second, we designed an improved PageRank algorithm to obtain the importance weight for each functionality and performance, which replaces the original average method with the proportion of connection weight. We considered the release time of the functionality, launch time of the product, and last update time of the product as crucial factors in the recommendation score to reflect the importance of the functionality and current development stage of the product. Finally, our method recommended a product set based on the weighted scores from the above results. In addition, we constructed a cloud product functionality dataset containing 339 functionalities. The experimental results show that the proposed method can generate a closely related set of products, leading to improved accuracy and higher satisfaction compared to mainstream methods.

In a smart parking system, the license plate recognition service controls the car's entry and exit and plays the core role in the parking lot system. When the Internet is interrupted, the parking lot's business will also be interrupted. Hence, we proposed an Edge-Cloud-Dew architecture for the mobile industry in order to tackle this critical problem. The architecture has an innovative design, including LAN-level deployment, Platform-as-a-Dew Service (PaaDS), the dew version of license plate recognition, and the dew type of machine learning model training. Based on these designs, the architecture presents many benefits, such as: (1) reduced maintenance and deployment issues and increased dew service reliability and sustainability; (2) effective release of the network constraint on cloud computing and increase in the horizontal and vertical scalability of the system; (3) enhancement of dew computing to resolve the heavy computing process problem; and (4) proposal of a dew type of machine learning training mechanism without requiring periodic retraining, but with acceptable accuracy. Finally, business owners can reduce their burdens when introducing machine learning technology. Our research goal is to make parking systems smarter in edge computing through the integration of cloud and dew architecture technology. [ABSTRACT FROM AUTHOR]

The on-demand availability of end-user resources, in particular data storage and processing power, without a direct or customer-defined organization is referred to as "cloud computing." Distributed computing is a term widely used yet may have different meanings to different people. Customers may access both public and private data using the cloud computing model. The potential of simultaneously requesting data from several clients of the same source, which slows down the source's response time, is the most significant security risk with cloud computing. Other security concerns with cloud computing include weaknesses in the client and connection. By reducing the delay between a client's request for data and the cloud source's answer, a method was developed in our recent research to enhance the performance of cloud computing. By requesting data from several clients from the same source at once or from multiple clients from the same source or from other sources at various times in the same network, four instances were shown. By testing request and response times while protecting data from loss and noise, the findings demonstrated the system's robustness. [ABSTRACT FROM AUTHOR]

Cloud services are distributed from manifold sources with autonomous security procedures. The conventional authentication methods result in asynchronous security towards multi‐resource access and sharing. This provides volatile authentication for sequential service sessions. For alleviating this issue, a Rendezvous Block‐based Authentication Framework (RBAF) is proposed. This framework is backboned with a blockchain paradigm that differentiates authentication based on rendezvous and asynchronous attributes. The modifications in initial and final attributes are observed, intended for training, and supplanted with service‐dependent authentications. In the different sessions, attribute‐based authentication and agreed end‐to‐end security are administered using agreed keys that are valid within the sessions. This key generation is modified using the new session and user attributes based on learning recommendations. The ledger paradigm records the session and its associated attributes for different training instances, based on which service flexibility is ensured. The proposed framework's performance is verified using the metrics service distribution ratio, false rate, session uptime, and service delay. [ABSTRACT FROM AUTHOR]

Cloud Computing is no longer just a fad and announcement. Since the beginning of this decade and up to the present, cloud computing has changed and evolved. Workflows are employed in many different scientific disciplines to coordinate data demanding applications, but their virtualized apps, platforms, compute, and storage must be promptly provisioned, scaled, and released instantly. The vast majority of researchers agree that using scientific workflows as a paradigm to define, arrange, and communicate complex scientific analysis is helpful. Workflow scheduling aims to optimally assign and execute sequence of tasks on various virtual machine instances shared and controlled by the workflow scheduler. Numerous scheduling algorithms have been proposed to tackle difficult problems more quickly than metaheuristic ones due to the NP-complete nature of this problem and its dependence on theproblem size. Energy consumption has emerged as a major issue in the cloud computing environment, in addition to the standard quality of service(QoS) restrictions like time and cost to handle this issue. The goal of this paper is to develop the Dynamic Provisioning Based on Demand (DPBD) algorithm for workflow scheduling. While sequential task completion and task priority are design restrictions, the dual objectives of the cloud service are to minimize makespan and energy usage. Using the non-dominated sorting genetic algorithm (NSGA-II), the multi-objective optimization problem's Pareto optimal solutions are found. Our approach is validated by simulating a complex workflow application. [ABSTRACT FROM AUTHOR]