Search

Thermoelectric (TE) material devices can be treated as an initiative to reduce global warming by scavenging waste heat and recycling it into useful electrical energy. In dual-phase materials, the energy filtering mechanism serves a significant role to enhance power factor by controlled electrical conductivity and Seebeck coefficient in connection with carrier concentration and carrier mobility. Here we performed the preparation of Cobalt Ferrite (CF) using mechanical alloying and the cf@zno composites via solid state reaction technique by varying stoichiometric weight between CF and ZnO. The magnetic, electric, and optical properties of the samples exposed the influence of CF on the TE properties of ZnO matrix. The cf7.5wt%@zno sample shows greater carrier mobility and moderate carrier concentration results the improved electrical conductivity value 4235 Sm−1 and hence achieved highest power factor 439 μWm−1K−2. [ABSTRACT FROM AUTHOR]

The formation of secondary phases of NiTe2 and NbTe2 in p-type Bi0.5Sb1.5Te3 thermoelectric alloys was investigated through in situ phase separation by using the melt spinning process. Adding stoichiometric Ni, Nb, and Te in a solid-state synthesis process of Bi0.5Sb1.5Te3, followed by rapid solidification by melt spinning, successfully segregated NiTe2 and NbTe2 in the Bi0.5Sb1.5Te3 matrix. Since heterointerfaces of Bi0.5Sb1.5Te3 with NiTe2 and NbTe2 form potential barriers of 0.26 and 0.08 eV, respectively, a low energy carrier filtering effect can be expected; higher Seebeck coefficients and power factors were achieved for Bi0.5Sb1.5Te3(NiTe2)0.01 (250 μV/K and 3.15 mW/mK2), compared to those of Bi0.5Sb1.5Te3 (240 μV/K and 2.69 mW/mK2). However, there was no power factor increase for NbTe2 segregated samples. The decrease in thermal conductivity was seen due to the possible additional phonon scattering by the phase segregations. Consequently, zT at room temperature was enhanced to 0.98 and 0.94 for Bi0.5Sb1.5Te3(NiTe2)0.01 and Bi0.5Sb1.5Te3(NbTe2)0.01, respectively, compared to 0.79 for Bi0.5Sb1.5Te3. The carrier filtering effect induced by NiTe2 segregations with an interface potential barrier of 0.26 eV effectively increased the Seebeck coefficient and power factor, thus improving the zT of p-type Bi0.5Sb1.5Te3, while the interface potential barrier of 0.08 eV of NbTe2 segregation appeared to be too small to induce an effective carrier filtering effect. [ABSTRACT FROM AUTHOR]

The formation of secondary phases of NiTe2 and NbTe2 in p-type Bi0.5Sb1.5Te3 thermoelectric alloys was investigated through in situ phase separation by using the melt spinning process. Adding stoichiometric Ni, Nb, and Te in a solid-state synthesis process of Bi0.5Sb1.5Te3, followed by rapid solidification by melt spinning, successfully segregated NiTe2 and NbTe2 in the Bi0.5Sb1.5Te3 matrix. Since heterointerfaces of Bi0.5Sb1.5Te3 with NiTe2 and NbTe2 form potential barriers of 0.26 and 0.08 eV, respectively, a low energy carrier filtering effect can be expected; higher Seebeck coefficients and power factors were achieved for Bi0.5Sb1.5Te3(NiTe2)0.01 (250 μV/K and 3.15 mW/mK2), compared to those of Bi0.5Sb1.5Te3 (240 μV/K and 2.69 mW/mK2). However, there was no power factor increase for NbTe2 segregated samples. The decrease in thermal conductivity was seen due to the possible additional phonon scattering by the phase segregations. Consequently, zT at room temperature was enhanced to 0.98 and 0.94 for Bi0.5Sb1.5Te3(NiTe2)0.01 and Bi0.5Sb1.5Te3(NbTe2)0.01, respectively, compared to 0.79 for Bi0.5Sb1.5Te3. The carrier filtering effect induced by NiTe2 segregations with an interface potential barrier of 0.26 eV effectively increased the Seebeck coefficient and power factor, thus improving the zT of p-type Bi0.5Sb1.5Te3, while the interface potential barrier of 0.08 eV of NbTe2 segregation appeared to be too small to induce an effective carrier filtering effect.