Search

Background: To evaluate the feasibility of C2 laminar screw (C2LS) fixation assisted by double holes and to explore a novel method for judging its safe positioning. Methods: The Digital Imaging in Communications format data of 25 C2 vertebrae specimens were obtained by computed tomography thin-slice scanning, and the data were imported into Mimics software for three-dimensional reconstruction. The bone cortex was removed at the starting and terminal midpoints of the lamina as the observation holes. Points A, M, and P represented the three different entry points of the C2LS. Point M was designated as the central entry point, point A was 1 mm from the extension surface of point M to the ventral side, and point P was 1 mm from the extension surface of point M to the dorsal side. Further classified into groups A, M, and P based on the screw path correlation parameters at each entry point. The distance between holes 1 and 2 (D1 and D2) was measured at the maximum safe inclination, parallel, and maximum safe extroversion positions when the screw-insertion points of C2LS were at the center points A, M, and P, respectively. The data of D1 and D2 of the three groups (A, M, P) in different screw directions were analyzed and compared. Results: Twenty-five specimens were measured in the parallel, maximum safe inclination, and maximum safe extroversion groups. In the parallel relationship, there were significant differences in the D1 and D2 data between the M and P groups. In the introversion relationship, there were significant differences in the D1 and D2 data between the M and P groups. In the extroversion relationship, there were significant differences in the D1 and D2 data among the A, M, and P groups, respectively. Conclusion: Use of the C2LS assisted by double holes was able to determine the safe position of the screw in operation. When D1 is greater than D2, the screw position can be considered relatively safe, with the intraoperative visual manifestation of a deep screw in hole 1 and a shallow screw in hole 2. If D1 is close to D2, it is necessary to ensure that the screws in both holes 1 and 2 are shallow, then the screw position is safe. If the screw in hole 1 is observed to be shallower than in hole 2 during surgery, regardless of the entry point position, there is a significant risk of ventral cortical perforation. Especially when the entry point is more anterior, even when inserting the screw parallel to the lamina, caution must be taken against the risk of ventral cortical perforation. [ABSTRACT FROM AUTHOR]

Scaphoid proximal pole destruction remains a surgical challenge owing to its high propensity for nonunion and osteonecrosis. The hemi-hamate graft has shown promising results in addressing this issue. However, long-term results of non-vascularized composite grafts remain uncertain. The purpose of this study was to investigate the feasibility of a vascularized hemi-hamate osteo-chondro-ligamentous pedicled flap for the reconstruction of the proximal pole of the scaphoid. Thirty fresh cadaveric wrists were used to harvest the hamate proximal pole on the dorsal intercarpal arch. A loss of substance of the scaphoid proximal pole was simulated and the hamate flap was transferred. In 15 wrists, a canulated screw osteosynthesis was performed to assess donor site morbidity and carpus stability on post-osteosynthesis dynamic radiographs. This study suggests that the proximal hamate can be harvested pedicled on the dorsal intercarpal arch. The pedicle (average pedicle diameter 0.9 mm, mean length 31.5 mm) allowed tension-free graft placement in all dissections, except for one. The morphology of the graft was very similar to that of the scaphoid proximal pole and the palmar capito-hamate ligament allowed scapholunate ligament reconstruction in all dissections. This is the first study that describes the use of a pedicled flap to fully reconstruct the complex osteo-chondro-ligamentous anatomy of the scaphoid proximal pole. This vascularized hemi-hamate flap could facilitate better long-term preservation of cartilage biomechanical properties compared to non-vascularized grafts. Donor site morbidity requires further investigation before recommending clinical use. [Display omitted] [ABSTRACT FROM AUTHOR]

OBJECTIVE To biomechanically evaluate the stability of internal fixation methods for femoral neck fractures in small-breed dogs. Furthermore, the possibility of replacing the headed screw with fully threaded headless cannulated screws in the fixation method was assessed. METHODS The study was conducted from December 12, 2023, to February 7, 2024. A total of 18 femurs from 9 canine cadavers were used in this study. After a simple neck fracture was created, in group A (n = 6), the fracture was stabilized with three 1.1-mm parallel Kirschner wires (K-wires). In group B (n = 6), a 3.0-mm partially threaded cannulated screw and an antirotation pin were used. In group C (n = 6), a 2.5-mm fully threaded headless cannulated screw and an antirotation pin were used. A mechanical test was conducted to apply a single axial compressive load to the femoral head. RESULTS 9 adult small-breed dogs weighing 3.6 to 8.3 kg (mean ± SD; 5.9 ± 1.6). The mean maximum failure load was highest in group C (495 ± 81 N), followed by group B (454 ± 50.4 N), and then group A (222 ± 21.6 N). Significant differences in maximum failure load were observed between groups A and B as well as groups A and C but not between groups B and C. CONCLUSION The use of fully threaded headless cannulated screws presents a promising method for internal fixation of canine femoral neck fractures. CLINICAL RELEVANCE To demonstrate the potential stability and reliability of fully threaded headless cannulated screws. [ABSTRACT FROM AUTHOR]

Background: Small-bore wire-guided thoracostomy tubes (SBWGTT) are commonly used in cats to manage pleural disease and generally have a low complication rate. Our study aimed to explore the correlation between recumbency of cats, placement method, and the occurrence of insertional complications to identify risk factors during SBWGTT placement. In this experimental cadaveric study, SBWGTT placement using a modified Seldinger technique was conducted in 24 feline cadavers. Cats, euthanized for reasons unrelated to the study, were randomly assigned to pleural effusion (EFF; n = 12) and pneumothorax (PNEU; n = 12) groups. Each cadaver was intubated and ventilated with a peak inspiratory pressure (PIP) of 10 mmHg, and sterile saline or air was instilled into the thorax over a 5 mm thoracoscopic trocar in the fourth intercostal space (ICS). Instillation was stopped when the lateral thoracic wall to lung distance (TWLD) reached 10 to 12 mm, measured with ultrasound in the favorable position. Sternal recumbency was the favorable position for the EFF group, and lateral recumbency for the PNEU group. Following the placement of the first SBWGTT in each group, the cadavers were positioned unfavorably (lateral recumbency for EFF group, sternal recumbency for PNEU group), and a second drain was introduced contralaterally. A bilateral 8th ICS thoracotomy was then performed to visually assess intrathoracic structures and drain integrity. A binary logistic regression mixed model was conducted to determine interaction between the induced condition and body position. Results: A total of 48 SBWGTTs were placed, with complications observed in 33.3% (8/24) of cases. Five of these were major complications consisting of lung lacerations. Complications were more common in the unfavorable position, accounting for 75% of cases, although this result was not statistically significant. The odds of complication rates were > 70% in the unfavorable position and decreased with an increase in TWLD (< 30%). Conclusion: Complications associated with SBWGTT placement are influenced by recumbency, although the data did not reach statistical significance. Placing cats in lateral recumbency for pneumothorax treatment and sternal recumbency for pleural effusion treatment may reduce insertional complications. [ABSTRACT FROM AUTHOR]

Introduction: Success in skeletal surgery depends on adequate access and exposure of the underlying skeletal structures. The retromandibular approach exposes the ramus condyle region through the posterior border of the mandible by utilizing the space between marginal mandibular and buccal branches of the facial nerve. Length of this safety window and accessibility varies in each individual owing to the differing ramifications of peripheral branches of facial nerve. These variations cannot be adequately assessed through clinical studies. Cadaveric studies permit us to extensively explore the surgical area to demystify the branching pattern and its relationship to the adjacent structures. Method: Thirty well-preserved cadaveric facial halves were dissected using a retromandibular incision. Visibility and accessibility were objectively graded through a scale. The safety window and furcation distance were measured using caliper and scale. The appearance of the retromandibular vein was also noted. Results: Eighteen facial halves showed maximum accessibility wherein the surgeon is expected to visualize the condylar neck, subcondylar region and posterior half of ramus. In 8 facial halves, accessibility was limited to subcondylar and midportion of posterior ramus, and in 8 facial halves, accessibility was limited to the midportion of ramus of the mandible. Safety window ranged from 1.9 to 3.5 cms. Distance between the posterior border of mandible and bifurcation of the facial nerve ranged from 0.5 to 1.5 cms. Facial nerve was encountered in 24 facial halves during the retromandibular approach. Retromandibular vein was encountered in 23 facial halves during the retromandibular approach. Discussion: The retromandibular approach is a versatile approach to the condyle subcondylar area as it provides much-required visibility and accessibility. The facial nerve branching pattern and intercommunicating branches determine the safety window which is adequate in most cases. The retromandibular vein is a reliable landmark predicting the vicinity of the facial nerve. [ABSTRACT FROM AUTHOR]

Background: Congenital cardiac malformations are a significant subset of developmental abnormalities, affecting approximately 6-8 per 1,000 live births and 2% of stillbirths. These malformations account for nearly one-quarter of all developmental anomalies, yet the etiology remains unknown in over 90% of cases. Hereditary factors and environmental conditions, such as high altitude and seasonal variations, have been implicated. The prevalence and types of congenital cardiac malformations in North India are not well-documented, prompting this study to investigate these aspects in adult and fetal cadavers at Bhagalpur. Materials and Methods: The study was conducted in the Department of Anatomy at Jawaharlal Nehru Medical College, Bhagalpur, using 25 adult and 45 fetal cadaver hearts, preserved in 10% formaldehyde solution. The hearts were dissected using a standardized method, examining and classifying malformations according to abnormalities in position, developmental progress, and visceral arches. Morphological features were assessed with tools including a dissection kit, magnifying lens, torch, probe, and measuring tape. Results: Out of 70 cases studied, 14 (20%) displayed congenital cardiac malformations, with a higher incidence in adults (24%) than in fetuses (17.78%). A total of 25 anomalies were identified among the 14 cases, with 10 types of anomalies observed. The most common malformation was atrial septal defect, followed by anomalous positions of the great arteries and cor biloculare. Coexistent external anomalies were found in 3 of the 14 cases (21.43%), affecting the face and multiple systems. Conclusion: The incidence of congenital cardiac malformations in Bhagalpur is consistent with findings from other regions of India and internationally. Atrial septal defect is the most prevalent malformation in this population, aligning with patterns observed in other Indian studies but differing from international reports. [ABSTRACT FROM AUTHOR]

Background: Abundant literature exists on the morphology of the carpal tunnel. Despite this, the shape of the carpal tunnel has been reported erratically, and most studies did not attempt to correlate findings with measurements taken from cadavers. The objective of this study was to perform a morphological analysis, determine the shape and mean dimensions of the carpal tunnel, determine the level of the narrowest area of the tunnel, and establish a set of values capable of serving as a reference for carpal tunnel release. Methods: The carpal tunnels of 20 fresh cadaveric hands were dissected, and acrylic casts were created and measured using industrial computed tomography. Results: Of the 20 casts, 19 were shaped like elliptic cylinders, with little variation in their measurements along the length. The location of the narrowest section of the carpal tunnel is very different among casts, and the length of the roof of the carpal tunnel ranged from 21.26 to 29.86 mm. Conclusions: The most common shape of the carpal tunnel is an elliptic cylinder. Because of the unpredictability of the location of the narrowest area of the carpal tunnel, carpal tunnel release must continue through all extension of its roof. We advise that the release should rarely be extended distally more than 30 mm from the distal palmar wrist crease, which corresponds, in most cases, to the middle of the pisiform. [ABSTRACT FROM AUTHOR]

Background and Objectives: Many risk factors for postoperative C5 palsy (PC5P) have been reported regarding a "cord shift" after a posterior approach. However, there are few reports about shoulder traction as a possible risk factor of anterior cervical surgery. Therefore, we assessed the stretched nerve roots when shoulder traction was applied on cadavers. Materials and Methods: Eight cadavers were employed in this study, available based on age and the presence of foramen stenosis. After dissecting the sternocleidomastoid muscle of the cadaver, the shoulder joint was pulled with a force of 2, 5, 8, 10, 15, and 20 kg. Then, the stretched length of the fifth nerve root was measured in the extra-foraminal zone. In addition, the same measurement was performed after cutting the carotid artery to accurately identify the nerve root's origin. After an additional dissection was performed so that the superior trunk of the brachial plexus could be seen, the stretched length of the fifth and sixth nerve roots was measured again. Results: Throughout the entire experiment, the fifth nerve root stretched out for an average of 1.94 mm at 8 kg and an average of 5.03 mm at a maximum force of 20 kg. In three experiments, the elongated lengths of the C5 nerve root at 8 kg and 20 kg were 1.69/4.38 mm, 2.13/5.00 mm, and 0.75/5.31 mm, respectively, and in the third experiment, the elongated length of the C6 nerve root was 1.88/5.44 mm. Conclusions: Although this was a cadaveric experiment, it suggests that shoulder traction could be the risk factors for PC5P after anterior cervical surgery. In addition, for patients with foraminal stenosis and central stenosis, the risk would be higher. Therefore, the surgeon should be aware of this, and the patient would need sufficient explanation. [ABSTRACT FROM AUTHOR]

Abstract Background To evaluate the feasibility of C2 laminar screw (C2LS) fixation assisted by double holes and to explore a novel method for judging its safe positioning. Methods The Digital Imaging in Communications format data of 25 C2 vertebrae specimens were obtained by computed tomography thin-slice scanning, and the data were imported into Mimics software for three-dimensional reconstruction. The bone cortex was removed at the starting and terminal midpoints of the lamina as the observation holes. Points A, M, and P represented the three different entry points of the C2LS. Point M was designated as the central entry point, point A was 1 mm from the extension surface of point M to the ventral side, and point P was 1 mm from the extension surface of point M to the dorsal side. Further classified into groups A, M, and P based on the screw path correlation parameters at each entry point. The distance between holes 1 and 2 (D1 and D2) was measured at the maximum safe inclination, parallel, and maximum safe extroversion positions when the screw-insertion points of C2LS were at the center points A, M, and P, respectively. The data of D1 and D2 of the three groups (A, M, P) in different screw directions were analyzed and compared. Results Twenty-five specimens were measured in the parallel, maximum safe inclination, and maximum safe extroversion groups. In the parallel relationship, there were significant differences in the D1 and D2 data between the M and P groups. In the introversion relationship, there were significant differences in the D1 and D2 data between the M and P groups. In the extroversion relationship, there were significant differences in the D1 and D2 data among the A, M, and P groups, respectively. Conclusion Use of the C2LS assisted by double holes was able to determine the safe position of the screw in operation. When D1 is greater than D2, the screw position can be considered relatively safe, with the intraoperative visual manifestation of a deep screw in hole 1 and a shallow screw in hole 2. If D1 is close to D2, it is necessary to ensure that the screws in both holes 1 and 2 are shallow, then the screw position is safe. If the screw in hole 1 is observed to be shallower than in hole 2 during surgery, regardless of the entry point position, there is a significant risk of ventral cortical perforation. Especially when the entry point is more anterior, even when inserting the screw parallel to the lamina, caution must be taken against the risk of ventral cortical perforation.

Abstract Background Small-bore wire-guided thoracostomy tubes (SBWGTT) are commonly used in cats to manage pleural disease and generally have a low complication rate. Our study aimed to explore the correlation between recumbency of cats, placement method, and the occurrence of insertional complications to identify risk factors during SBWGTT placement. In this experimental cadaveric study, SBWGTT placement using a modified Seldinger technique was conducted in 24 feline cadavers. Cats, euthanized for reasons unrelated to the study, were randomly assigned to pleural effusion (EFF; n = 12) and pneumothorax (PNEU; n = 12) groups. Each cadaver was intubated and ventilated with a peak inspiratory pressure (PIP) of 10 mmHg, and sterile saline or air was instilled into the thorax over a 5 mm thoracoscopic trocar in the fourth intercostal space (ICS). Instillation was stopped when the lateral thoracic wall to lung distance (TWLD) reached 10 to 12 mm, measured with ultrasound in the favorable position. Sternal recumbency was the favorable position for the EFF group, and lateral recumbency for the PNEU group. Following the placement of the first SBWGTT in each group, the cadavers were positioned unfavorably (lateral recumbency for EFF group, sternal recumbency for PNEU group), and a second drain was introduced contralaterally. A bilateral 8th ICS thoracotomy was then performed to visually assess intrathoracic structures and drain integrity. A binary logistic regression mixed model was conducted to determine interaction between the induced condition and body position. Results A total of 48 SBWGTTs were placed, with complications observed in 33.3% (8/24) of cases. Five of these were major complications consisting of lung lacerations. Complications were more common in the unfavorable position, accounting for 75% of cases, although this result was not statistically significant. The odds of complication rates were > 70% in the unfavorable position and decreased with an increase in TWLD (

Background: The pyramidalis muscle, often considered a minor muscle of the anterior abdominal wall, has variable presence and morphology across populations. Its clinical significance, particularly in surgical interventions involving the suprapubic region, necessitates a detailed understanding of its anatomical features. Aims and Objectives: This study aimed to assess the incidence, morphometric variations (length, width, and thickness), and clinical relevance of the pyramidalis muscle in the cadaveric population, offering insights that could enhance surgical outcomes in the suprapubic region. Materials and Methods: It conducted on 60 formalin-fixed cadavers from the Department of Anatomy at Guntur Medical College, Guntur, and Government Medical College, Ongole. This study utilized digital Vernier calipers and measuring tape for precise morphometric analysis. Parameters such as presence, number of bellies, length, width, thickness, and the Pyramidalis Pubo Umbilical Index were meticulously recorded. Results: The pyramidalis muscle was present in 83.3% of the cases, with 80% bilateral and 3.3% unilateral occurrences. The mean length was 66.2 mm on the right and 64.4 mm on the left. The width at the base averaged 23.4 mm (right) and 22.5 mm (left), with a consistent mean thickness of 4.1 mm on both sides. The Pyramidalis Pubo Umbilical Index was 39.82 (right) and 39.2 (left), indicating little variation between sides. Conclusion: The pyramidalis muscle exhibits a high incidence rate and specific morphometric characteristics in the cadaveric population. These findings underscore its potential impact on surgical approaches in the suprapubic area, providing valuable anatomical insights for healthcare professionals.

Abstract Background Robot-assisted total knee arthroplasty (TKA) has been shown to facilitate high-precision bone resection, which is an important goal in TKA. The aim of this cadaveric study was to analyze the accuracy of the target angle and bone resection thickness of a recently introduced robotic TKA system. Methods This study used 4 frozen cadaveric specimens (8 knees), 2 different implant designs, navigation, and a robotic system. The 4 surgeons who participated in this study were trained and familiar with the basic principles and operating procedures of this system. The angle of the bone cuts performed using the robotic system was compared with the target angles from the intraoperative plan. For each bone cut, the resection thickness was recorded and compared with the planned resection thickness. Results The mean angular difference for all specimens was less than 1°, and the standard deviation was less than 2°. The mean difference between the planned and measured angles was close to 0 and not significantly different from 0 except for the difference in the frontal tibial component angle, which was 0.88°. The mean difference in the hip-knee-ankle axis angle was − 0.21°± 1.06°. The mean bone resection difference for all specimens was less than 1 mm, and the standard deviation was less than 0.5 mm. Conclusions The results of the cadaveric experimental study showed that the new TKA system can realize highly accurate bone cuts and achieve planned angles and resection thicknesses. Despite the limitations of small sample sizes and large differences between cadaveric and clinical patients, the accuracy of cadaveric experiments provides strong support for subsequent clinical trials.

Louis Hubert Farabeuf (1841–1910) was a reformer of clinical, surgical, and topographic human anatomy studies during the second half of the 19th century. Over 30 years as a professor of Anatomy, Farabeuf wrote outstanding anatomical textbooks. As the head of Anatomic Studies in the Faculty of Medicine in Paris, he succeeded in leading a profound restructuring of the way anatomy and surgery were taught. As a result of his work and research, several anatomical terms, clinical signs, and surgical instruments were named after him. For his outstanding career in anatomy, he was elected to the Academy of Medicine in 1897. [ABSTRACT FROM AUTHOR]

Purpose: Shoulder surgeries, vital for diverse pathologies, pose a risk of iatrogenic nerve damage. Existing literature lacks diverse bone landmark–specific nerve position data. The purpose of this study is to address this gap by investigating such relationships. Method: This cadaveric study examines axillary, radial and suprascapular nerves' relation with acromion, coracoid and greater tuberosity of the humerus (GT). It also correlates this data with humeral lengths and explores nerve dynamics in relation to arm positions. Results: The mean distance from the axillary nerve to (i) GT was 4.38 cm (range 3.32–5.44, SD 0.53), (ii) acromion was 6.42 cm (range 5.03–7.8, SD 0.694) and (iii) coracoid process was 4.3 cm (range 2.76–5.84, SD 0.769). Abduction brought the nerve closer by 0.36 cm, 0.35 cm and 0.53 cm, respectively. The mean distance from radial nerve to (i) GT was 5.46 cm (range 3.78–7.14, SD 0.839), (ii) acromion was 7.82 cm (range 5.4–10.24, SD 1.21) and (iii) tip of the coracoid process was 6.09 cm (range 4.07–8.11 cm, SD 1.01). The mean distance from the suprascapular nerve to the acromion was 4.2 cm (range 3.1–5.4, SD 0.575). The mean humeral length was noted to be 27.83 cm (range 25.3–30.7, SD 1.13). There was no significant correlation between these distances and humeral lengths. Conclusion: It is essential to exercise caution to avoid axillary nerve damage during the abduction manoeuvre, as its distance from the greater tuberosity and tip of the coracoid process has shown a significant reduction. The safe margins, in relation to the length of the humerus and consequently the patient's stature, exhibit no significant variation. In situations where the greater tuberosity (GT) and the border of the acromion are inaccessible due to reasons such as trauma, the tip of the coracoid process can serve as a dependable bone landmark for establishing a secure surgical margin. [ABSTRACT FROM AUTHOR]

Anterior–posterior (AP) stability is an important measure of knee performance after total knee arthroplasty (TKA). To improve the stabilizing effect of implants designed to compensate for the loss of the cruciate ligaments, it is important to understand the tibiofemoral contact situation within the native ligamentous situation of the knee and how it changes after cruciate ligament resection. This in vitro study introduces a new approach to accurately measure the tibiofemoral kinematics in a six-degrees-of-freedom joint motion simulator by tracking landmark-based coordinate systems and their corresponding bone geometries. The tibiofemoral contact situation was investigated by projecting the medial and lateral flexion facet centers onto the tibial plateau under AP shear forces across various flexion angles in thirteen knees. Tests were conducted pre- and post-cruciate ligament resection. Post-cruciate ligament resection, the femoral condyles shifted closer to or even exceeded the posterior border of the tibial plateau, but only slightly closer to the anterior border. This study presents a new methodology for measuring the tibiofemoral kinematics that can be applied to multiple loading profiles. It provides a basis for further investigations, including passive or active muscle forces, to enhance the design of total knee protheses and improve surgical outcomes. [ABSTRACT FROM AUTHOR]

Posterior pilon fracture is speculated to occur by a combination of rotation and axial load, which makes it different from rotational posterior malleolar fracture or pilon fracture, but is not validated in vitro. The aim of the current study is to investigate the injury mechanisms of posterior pilon fracture on cadaveric specimens. Eighteen cadaveric specimens were mounted to a loading device to undergo solitary vertical loading, solitary external rotational loading, and combined vertical and external rotational loading until failure, in initial position of plantarflexion with or without varus. The fracture characteristics were documented for each specimen. Vertical loading force combined with external rotation force diversified the fracture types resulting in pilon fracture, tibial spiral fracture, rotational malleolar fracture, talar fracture or calcaneal fracture. Vertical violence combined with external rotational loading in position of 45° of plantarflexion and 0° of varus produced posterior pilon fracture in specimens No. 13 and 14. Combination of vertical and external rotational force in plantarflexion position on cadaveric specimens produce posterior pilon fracture. [ABSTRACT FROM AUTHOR]

Background: The superficial ulnar artery (SUA) is a rare anatomical variation with significant implications in clinical procedures involving the forearm and hand. Objective: This study aims to explore the prevalence, anatomical course, and clinical relevance of the SUA in cadavers. Methods: We conducted a descriptive cadaveric study at Varunarjun MC Dissection Hall, examining the arms of 80 cadavers to identify the presence of the SUA. Each forearm was dissected to trace the arterial pathway, and variations were recorded. Results: The study found a prevalence rate of SUA in a certain percentage of the cadavers, with variations in its course and termination. Conclusion: Understanding the prevalence and characteristics of the SUA can enhance the outcomes of surgical and diagnostic procedures in the forearm and hand. [ABSTRACT FROM AUTHOR]

Background: The pyramidalis muscle, often considered a minor muscle of the anterior abdominal wall, has variable presence and morphology across populations. Its clinical significance, particularly in surgical interventions involving the suprapubic region, necessitates a detailed understanding of its anatomical features. Aims and Objectives: This study aimed to assess the incidence, morphometric variations (length, width, and thickness), and clinical relevance of the pyramidalis muscle in the cadaveric population, offering insights that could enhance surgical outcomes in the suprapubic region. Materials and Methods: It conducted on 60 formalin-fixed cadavers from the Department of Anatomy at Guntur Medical College, Guntur, and Government Medical College, Ongole. This study utilized digital Vernier calipers and measuring tape for precise morphometric analysis. Parameters such as presence, number of bellies, length, width, thickness, and the Pyramidalis Pubo Umbilical Index were meticulously recorded. Results: The pyramidalis muscle was present in 83.3% of the cases, with 80% bilateral and 3.3% unilateral occurrences. The mean length was 66.2 mm on the right and 64.4 mm on the left. The width at the base averaged 23.4 mm (right) and 22.5 mm (left), with a consistent mean thickness of 4.1 mm on both sides. The Pyramidalis Pubo Umbilical Index was 39.82 (right) and 39.2 (left), indicating little variation between sides. Conclusion: The pyramidalis muscle exhibits a high incidence rate and specific morphometric characteristics in the cadaveric population. These findings underscore its potential impact on surgical approaches in the suprapubic area, providing valuable anatomical insights for healthcare professionals. [ABSTRACT FROM AUTHOR]

Background: The arterial supply of the large colon is provided by the superior mesenteric artery (SMA) and inferior mesenteric artery (IMA). A particularly important area, especially in the field of colorectal surgery, is the splenic flexure of the colon. There is a noticeable misunderstanding in the correct nomenclature of the major arterial anastomoses between SMA and IMA — Drummond’s Marginal Artery (DMA), Arc of Riolan (AOR), and Moskovitz Artery (MA). The aim of this study is to organise the nomenclature and propose a new simplified one to facilitate communication between physicians of various specialties. Materials and methods: Fourteen formalin-fixed cadavers (9 male, 5 female) accessible from the Chair of Anatomy of the Jagiellonian University Collegium Medicum were dissected to examine and describe the anatomical variations of anastomoses between SMA and IMA. Results: The artery of Drummond was present in all 14 specimens maintaining the continuity of the vessel along its entire course. The Arc of Riolan was found in 7 out of 14 cadavers (50%). The artery of Moskovitz was not found. The average length measured between IMA and aortic bifurcation and between IMA and SMA was 51.00 mm and 84.68 mm, respectively. Conclusions: SMA and IMA anastomoses form an arterial network that is characterised by high variability and trail in surgically strategic areas. For this reason, simplifying the terminology and using unambiguous names of these vessels based on their trail and anatomical relationship with IMV are crucial for the proper planning and execution of surgical procedures performed on the colon. [ABSTRACT FROM AUTHOR]

Background: The anatomical variations in the position, length, arterial supply and extension of mesoappendix of the vermiform appendix (VA) are pivotal to establishing a standard pattern in the study population of known ethnicity and their clinical applicability. Materials and methods: The present study was conducted on 47 adult human cadavers, thirty-five males and twelve female subjects of North Indian ethnicity. Results: Retrocaecal appendix was found in 23 cases (48.9%) followed by pelvic in 13 (27.7%), three cases each of pre-ileal, post-ileal, and promontoric (6.4%), one case (2.1%) each of paracaecal and subcaecal reported. The length of VA varied from three to ten centimetres, averaging about 7.37 ± 1.67 cm, both the shortest (2.9 cm) (female) and longest (10 cm) (male) were of retrocaecal type. The main appendicular artery (MAA) showed a widely varied branching pattern within the mesoappendix, ranging from three to seven. Fourteen cases (29.78%) showed the accessory appendicular artery (AAA) or dual arterial supply, arising from the ileocolic artery in ten (21%) and in four from the post-caecal (9%). In the specimens with dual arterial supply, the estimated portions of the VA supplied by the MAA also vary with distal ¾th being supplied in 57.14%. In ten cases (21%), the mesoappendix failed to reach the tip of the VF. Conclusions: Knowledge of anatomical diversities in position, length, course, arterial supply, branching pattern, and mesoappendix is potentially crucial in avoiding surgical catastrophes. Atypical positions of the organ can cause diagnostic confusion and result in delayed treatment. VF supplied by an end artery is one of the causes of the occurrence of appendicitis and mesoappendix not reaching the tip making the organ more vulnerable to necrosis. Vascular variations and anomalies involving the main or accessory appendicular artery are critical to prevent haemorrhage or faulty ligatures. [ABSTRACT FROM AUTHOR]

Background: Robot-assisted total knee arthroplasty (TKA) has been shown to facilitate high-precision bone resection, which is an important goal in TKA. The aim of this cadaveric study was to analyze the accuracy of the target angle and bone resection thickness of a recently introduced robotic TKA system. Methods: This study used 4 frozen cadaveric specimens (8 knees), 2 different implant designs, navigation, and a robotic system. The 4 surgeons who participated in this study were trained and familiar with the basic principles and operating procedures of this system. The angle of the bone cuts performed using the robotic system was compared with the target angles from the intraoperative plan. For each bone cut, the resection thickness was recorded and compared with the planned resection thickness. Results: The mean angular difference for all specimens was less than 1°, and the standard deviation was less than 2°. The mean difference between the planned and measured angles was close to 0 and not significantly different from 0 except for the difference in the frontal tibial component angle, which was 0.88°. The mean difference in the hip-knee-ankle axis angle was − 0.21°± 1.06°. The mean bone resection difference for all specimens was less than 1 mm, and the standard deviation was less than 0.5 mm. Conclusions: The results of the cadaveric experimental study showed that the new TKA system can realize highly accurate bone cuts and achieve planned angles and resection thicknesses. Despite the limitations of small sample sizes and large differences between cadaveric and clinical patients, the accuracy of cadaveric experiments provides strong support for subsequent clinical trials. [ABSTRACT FROM AUTHOR]

Study objective We report a novel block technique aimed to provide lumbosacral, abdominal, and hip analgesia: The quadro-iliac plane (QIP) block. Design A cadaveric examination that evaluates the spread of QIP block. Setting Cadaver laboratory. Patients One unembalmed cadaver. Interventions Bilateral ultrasound-guided QIP blocks on cadavers with 40 mL of methylene blue %0.5 each side. Measurements Dye spread in cadaver. Main results There was staining in the deep interfascial plane of the erector spinae muscles. Extensive staining of the interfascial plane corresponding to the posterior aspect of the quadratus lumborum muscle (QLM) was observed. There was extensive staining on the anterior surface of the QLM. There was spread of dye traversing along the transversalis fascia and significantly infiltrating retroperitoneal fat tissue. Bilateral staining of the ilioinguinal and iliohypogastric nerves was observed. On the right, there was minimal staining over the subcostal nerve. There was dye present bilaterally within the deep regions of the transverse processes. The lumbar plexus was stained on both sides. Conclusion The local anesthetic applied from a place where the QLM reaches its largest volume and the fascial plane creates a closed gap in the caudal area may exhibit a more rounded and extensive spread. Quadro-iliac plane block, involves the administration of local anesthetic to the posterior aspect of the QLM at its origin from the iliac crest. According to our cadaver study, this technique may be a promising option for alleviating acute and chronic pain in the lumbosacral, lower abdominal, and hip regions. [ABSTRACT FROM AUTHOR]

Background: The abductor pollicis longus (APL) tendon exhibits significant anatomical variability, which is crucial for understanding its clinical implications in surgeries involving the thumb. While several studies have documented these variations in different populations, a systematic classification providing insights for surgical interventions targeting the thumb and its associated anatomical structures is rare. Methods: This cadaveric study involved the dissection of 87 upper extremities from 44 embalmed cadavers (22 males, 22 females). The APL tendons were meticulously dissected, and the number of tendons slips and their insertion sites were recorded. Data were analyzed using Chi-square and Fisher's exact tests to assess differences in insertion sites between sexes and sides. Results: The number of APL tendon slips distal to the first extensor compartment ranged from 1 to 5, with double slips being the most common configuration. The primary insertion site was consistently the base of the first metacarpal bone, observed in all specimens. Secondary insertion sites included the abductor pollicis brevis muscle (67.82 %), trapezium (17.24 %), opponens pollicis muscle (5.75 %), and proximal phalanx (2.30 %). Statistical analysis showed no significant differences in the insertion sites between sides and sexes. A new classification system for APL tendon slips was developed, categorizing them into three main types (Type I, II, III), and two minor types (Type IV and V), based on the number and insertion sites of the tendons. Type II with double tendon slips was the most prevalent (48.28 %). Symmetrical findings were found in 21 cases (48.84 %), with subtype IIb being the most common pattern. Conclusion: This study highlights significant anatomical variations of the APL tendon in the Thai population, with important clinical implications for surgical planning and treatment of thumb-related conditions. The proposed classification system provides a structured framework for understanding these variations, aiding in the diagnosis and surgical management.

Introduction: The keystone area, a crucial part of the nasal dorsum that maintains its structural stability, is known to have anatomical variations. This study aimed to evaluate these anatomical variations in Nepalese noses. Methods: This was an observational, analytical study done at a tertiary center after taking ethical approval {208(6-11)E2-077/078}. Thirty-one cadaveric noses consisting of 26 males and five females aged 24 to 70 years were dissected. The shape of the caudal margin and the overlap pattern of the nasal bone over upper lateral cartilage were assessed. The proportion of overlap was calculated. The lengths of the lateral and dorsal keystone and dorsal quadrangular cartilage were measured. Results: The most common shape of the nasal bone caudal margin was curvilinear 15 (48.39%) followed by paramedian retractions 8 (25.81%). Elongated midline was the least commonly seen in 1 (3.23%) female only. The length of the dorsal keystone ranged from 1-12 mm (mean 6.97 ± 2.57) whilst the lateral keystone measured 1-4 mm (mean 2.22± 1.20). The dorsal quadrangular cartilage measured 21 – 39 mm ( mean 29.77± 4.6). The mean overlap proportion was 23.82± 7.33 (11 – 40) %. Conclusions: Anatomical variations in the structural components of the keystone area in Nepalese was seen in this study.

Abstract Background Musculoskeletal (MSK) complaints often present initially to primary care physicians; however, physicians may lack appropriate instruction in MSK procedures. Diagnostic and therapeutic injections are useful orthopedic tools, but inaccuracy leads to unnecessary costs and inadequate treatment. The authors hypothesized that trainees afforded the opportunity to practice on a cadaver versus those receiving visual-aided instruction on subacromial injections (SAI) will demonstrate differences in accuracy and technique. Methods During Spring of the year 2022, 24 Internal Medicine and Family Medicine residents were randomly divided into control and intervention groups to participate in this interventional randomized cadaveric study. Each group received SAI instruction via lecture and video; the intervention group practiced on cadavers under mentored guidance. Subjects underwent a simulated patient encounter culminating in injection of latex dye into a cadaveric shoulder. Participants were evaluated based on a technique rubric, and accuracy of injections was assessed via cadaver dissection. Results Twenty-three of twenty-four participants had performed at least one MSK injection in practice, while only 2 (8.3%) of participants had performed more than 10 SAIs. There was no difference in technique between control 18.4 ± 3.65 and intervention 19.2 ± 2.33 (p = 0.54). Dissections revealed 3 (25.0%) of control versus 8 (66.7%) of intervention injections were within the subacromial space. Chi-Square Analysis revealed that the intervention affected the number of injections that were within the subacromial space, in the tissues bordering the subacromial space, and completely outside the subacromial space and bordering tissues (p = 0.03). The intervention group had higher self-confidence in their injection as opposed to controls (p = 0.04). Previous SAI experience did not affect accuracy (p = 0.76). Conclusions Although primary care physicians and surgeons develop experience with MSK procedures in practice, this study demonstrates a role for early integrated instruction and simulation to improve accuracy and confidence. The goal of improving accuracy in MSK procedures amongst all primary care physicians may decrease costs and avoid unnecessary referrals, diagnostic tests, and earlier than desired surgical intervention.

Abstract Background Sprengel’s deformity is a congenital abnormality of the shoulder girdle. Because scapular retraction, such as the Green procedure, is usually performed during childhood to improve esthetics and shoulder function, Sprengel’s deformity is rarely found in older patients. Case presentation We presented a unique case of a Japanese female cadaver with Sprengel’s deformity at the age of 80 years. Anatomical dissection and radiological imaging revealed musculoskeletal anomalies associated with Sprengel’s deformity, including Klippel–Feil syndrome, presence of an omovertebral bone, and absence of the trapezius muscle. In addition, bilateral cervical ribs were in contact with the brachial plexus. These anomalies may lead to numbness, pain, and limited range of motion of the neck and upper girdle with aging. Conclusions Because most adult patients with Sprengel’s deformity experience neck pain and limited movement of the shoulder, the presented case is a rare case of neglected Sprengel’s deformity in an 80-year-old cadaver.

Introduction: Corona Mortis (CMOR) is a term used to describe an anatomical vascular variant of retropubic anastomosis located posterior to superior pubic ramus. We aim to provide sufficient data on the incidence, morphology and mean location of ‘crown of death’ in Asian population. Other objectives include to assess the relationship between CMOR incidence with gender, race and age. Materials and methods: This is a cross-sectional cadaveric study involving 164 randomly selected fresh multiracial Asian hemipelves (82 cadavers). Hemipelves were dissected to expose and evaluate the vascular elements posterior to superior pubic rami. Data were analysed using Chi-Square, t-test and with the help of IBM SPSS Statistics v26 software. Results: CMOR was found in 117 hemipelves (71.3%). No new morphological subtype was found. The mean distance of CMOR to symphysis pubis was 54.72mm (SD 9.35). Based on the results, it is evident that precaution needed to be taken at least within 55mm from symphysis pubis during any surgical intervention. The lack of statistically significant correlation between CMOR occurrence and gender, race and age suggest that the incidence of CMOR could be sporadic in manner. Conclusion: We conclude that CMOR is not just aberrant vessel as the incidence is high and this finding is comparable to other studies. The mean location of CMOR obtained in this study will guide surgeons from various disciplines in Asia to manage traumatic vascular injury and to perform a safe surgical procedure involving the pelvis area.

Lumbar radicular pain is a common symptom of lumbar disc herniation and spinal canal stenosis, and L4 nerve root impingement is difficult to diagnose. This study aimed to elucidate the extension rate of L4 nerve roots in Thiel-embalmed specimens using both classic and new femoral nerve stretch test (FNST), as well as straight leg raising test (SLRT). Additionally, the extension rate of the L2 and L3 nerve roots and L5 and S1 roots were determined using FNST (both classic and new) and SLRT, respectively. Four Thiel-embalmed specimens were used. The extension rate data of the nerve root were obtained using a displacement sensor under the following conditions: knee joint flexed to 0°/45°/90°/135° with either the hip extension/flexion of 0° (classic FNST) or extension of 15° (new FNST); and hip joint flexed to 0°/30°/60°/90° with the knee flexion of 0° (SLRT). Case A had almost no L4 nerve root lengthening at 45° and 90° knee joint flexion; however, at 135° of knee flexion, the nerve root was lengthened. In Case B, the L4 nerve root was hardly extended by the classic FNST, but it was extended at 135° of knee flexion and 15° of hip extension. In Case C, the L4 nerve root showed little change by classic FNST and it was shortened by new FNST, whereas, it was extended by SLRT. Case D showed a shortened L4 nerve root at 135° of knee flexion in classic FNST and at 0°/45°/90°/135° of knee flexion and 15° of hip extension. Further, no root shortening was observed for L2 and L3 nerve roots according to both classic and new FNST. In contrast, the extension of L2 and L3 nerve root with the new FNST was high. In all cases, nerve roots were lengthened by the SLRT. Further, as the hip flexion angle increased, the rate of nerve elongation also increased. It was shown that in patients in whom L4 nerve root was extended by FNST, it was shortened by SLRT. The opposite pattern was also observed. Further, it is believed that FNST and SLRT are reliable tests for L2 and L3 radiculopathy and L5 and S1 radiculopathy, respectively, and that more tension on the femoral and sciatic nerves is better. Furthermore, we recommend that FNST should be performed with 15° hip extension and 135° knee flexion to improve the diagnostic accuracy. [ABSTRACT FROM AUTHOR]

To compare the success rate and extent of sciatic nerve staining with a bupivacaine–dye solution using two injection techniques: 'blind' or ultrasound-guided approach. Prospective, experimental, randomized, cadaveric study. Adult female Wistar rat cadavers [ n = 24, mass 352 g (323–374)]. Each sciatic nerve was randomly allocated to one of two groups: 'blind' (group B) or ultrasound-guided approach (group US) to injection. Following injection of bupivacaine–dye solution (0.1 mL), gross anatomical dissection was performed to visualize nerve staining, categorizing it as either positive or negative. The length of nerve staining was then measured and visual inspection conducted to identify potential nerve damage. Fisher's exact test was used to compare positive or negative nerve staining, and the Wilcoxon signed rank test used to compare the length of nerve staining between groups. In group B, the bupivacaine–dye solution stained 16/24 sciatic nerves (67% success). In group US, staining was successfully observed in all 24 nerves (100% success, p < 0.004). The length of nerve staining [median (interquartile range)] was 2 (2–3) mm in group B and 5 (4–6) mm in group US (p < 0.001). One sciatic nerve in group B had injectate distributed over 16 mm, suggestive of an intraneural injection. No signs of laceration or nerve damage were visible under 6× magnification in either group. The ultrasound-guided approach for sciatic nerve injection demonstrated a higher success rate with superior injectate distribution when compared with the 'blind' approach. Ultrasound guidance is recommended over a 'blind' approach for sciatic nerve block in rats when possible. [ABSTRACT FROM AUTHOR]

Background: Sprengel's deformity is a congenital abnormality of the shoulder girdle. Because scapular retraction, such as the Green procedure, is usually performed during childhood to improve esthetics and shoulder function, Sprengel's deformity is rarely found in older patients. Case presentation: We presented a unique case of a Japanese female cadaver with Sprengel's deformity at the age of 80 years. Anatomical dissection and radiological imaging revealed musculoskeletal anomalies associated with Sprengel's deformity, including Klippel–Feil syndrome, presence of an omovertebral bone, and absence of the trapezius muscle. In addition, bilateral cervical ribs were in contact with the brachial plexus. These anomalies may lead to numbness, pain, and limited range of motion of the neck and upper girdle with aging. Conclusions: Because most adult patients with Sprengel's deformity experience neck pain and limited movement of the shoulder, the presented case is a rare case of neglected Sprengel's deformity in an 80-year-old cadaver. [ABSTRACT FROM AUTHOR]

Introduction: Distal radioulnar joint (DRUJ) instabilities are challenging and their optimal treatment is controversial. In special cases or when reconstruction of the stabilizing triangular fibrocartilage complex (TFCC) fails, K-wire transfixation can be performed. However, no consensus has been reached regarding the rotational position of the forearm in which this should be done. Therefore, it was investigated whether anatomical reduction would best be achieved by transfixation in neutral position or supination of the forearm. Materials and methods: Twelve cadaveric upper limbs were examined before dissection of the DRUJ stabilizing ligaments and after closed transfixation in both positions by C-arm cone-beam CT. Whether this was first done in neutral position or in supination was randomized. The change in the radioulnar ratio (RR) in percentage points (%points) was analyzed using Student's t-test. RR was used since it is a common and sensitive method to evaluate DRUJ reduction, expressing the ulnar head's position in the sigmoid notch as a length ratio. Results: The analysis showed an increased change in RR in neutral position with 5.4 ± 9.7%points compared to fixation in supination with 0.2 ± 16.1%points, yet this was not statistically significant (p = 0.404). Conclusions: Neither position leads to a superior reduction in general. However, the result was slightly closer to the anatomical position in supination. Thus, transfixation of the DRUJ should be performed in the position in which reduction could best be achieved and based on these data, that tends to be in supination. Further studies are necessary to validate these findings and to identify influential factors. [ABSTRACT FROM AUTHOR]

Osteochondritis dissecans (OCD) of the humeral capitellum is an important cause of elbow disability in young athletes. Large and unstable lesions sometimes require joint reconstruction with osteochondral autograft. Several approaches have been described to expose the capitellum for the purpose of treating OCD. The posterior anconeus-splitting approach and the lateral approach with or without release of the lateral ligamentous complex are the most frequently used for this indication. The surface accessible by these approaches has not been widely studied. This study compared the extent of the articular surface of the capitellum that could be exposed with the Kocher approach (without ligament release) vs. the posterior anconeus-splitting approach. A secondary outcome was the measurement of any additional area that could be reached with lateral ulnar collateral ligament release (Wrightington approach). The 3 approaches were performed on 8 adult cadaveric elbows: first, the Kocher approach; then, the anconeus-splitting approach; and finally, the Wrightington approach. The visible articular surface was marked out after completion of each approach. The mean articular surface of the capitellum was 708 mm2 (range, 573-830 mm2). The mean visible articular surface was 49% (range, 43%-60%) of the total surface with the Kocher approach, 74% (range, 61%-90%) with the posterior anconeus-splitting approach, and 93% (range, 91%-97%) with the Wrightington approach. Although the Kocher approach provided access to the anterior part of the capitellum, the anconeus-splitting approach showed adequate exposure to the posterior three-quarters of the articular surface and overlapped the most posterior part of the Kocher approach. A combination of the 2 lateral ulnar collateral ligament–preserving approaches allowed access to 100% of the joint surface. Most OCD lesions are located in the posterior area of the capitellum and can therefore be reached with the anconeus-splitting approach. When OCD lesions are located anteriorly, the Kocher approach without ligament release is efficient. A combination of these 2 approaches enabled the entirety of the joint surface to be viewed. [ABSTRACT FROM AUTHOR]

The treatment of shoulder instability in patients with subcritical glenoid bone loss poses a difficult problem for surgeons as new evidence supports a higher failure rate when a standard arthroscopic Bankart repair is used. The purpose of this study was to compare a conjoint tendon transfer (soft-tissue Bristow) to an open Bankart repair in a cadaveric instability model of 10% glenoid bone loss. Eight cadaveric shoulders were tested using a custom testing system that allows for a 6-degree-of-freedom positioning of the glenohumeral joint. The rotator cuff muscles were loaded to simulate physiologic muscle conditions. Four conditions were tested: (1) intact, (2) Bankart lesion with 10% bone loss, (3) conjoint tendon transfer, and (4) open Bankart repair. Range of motion, glenohumeral kinematics, and anterior-inferior translation at 60° of external rotation with 20 N, 30 N, and 40 N were measured in the scapular and coronal planes. Glenohumeral joint translational stiffness was calculated as the linear fit of the translational force-displacement curve. Force to anterior-inferior dislocation was also measured in the coronal plane. Repeated measures analysis of variance with a Bonferroni correction was used for statistical analysis. A Bankart lesion with 10% bone loss increased the range of motion in both the scapular (P =.001) and coronal planes (P =.001). The conjoint tendon transfer had a minimal effect on the range of motion (vs. intact P =.019,.002), but the Bankart repair decreased the range of motion to intact (P =.9,.4). There was a significant decrease in glenohumeral joint translational stiffness for the Bankart lesion compared with intact in the coronal plane (P =.021). The conjoint tendon transfer significantly increased stiffness in the scapular plane (P =.034), and the Bankart repair increased stiffness in the coronal plane (P =.037) compared with the Bankart lesion. The conjoint tendon transfer shifted the humeral head posteriorly at 60° and 90° of external rotation in the scapular plane. The Bankart repair shifted the head posteriorly in maximum external rotation in the coronal plane. There was no significant difference in force to dislocation between the Bankart repair (75.8 ± 6.6 N) and the conjoint tendon transfer (66.5 ± 4.4 N) (P =.151). In the setting of subcritical bone loss, both the open Bankart repair and conjoint tendon transfer are biomechanically viable options for the treatment of anterior shoulder instability; further studies are needed to extrapolate these data to the clinical setting. [ABSTRACT FROM AUTHOR]

Purpose: The most popular knee posterolateral corner (PLC) reconstruction techniques describe that a common peroneal nerve (CPN) neurolysis must be done to safely address the posterolateral aspect of the knee. The purpose of this study was to measure the distance between the CPN and the fibular insertion of the FCL in different degrees of knee flexion in cadaveric specimens, to identify if tunnel drilling could be done anatomically and safely without a CPN neurolysis. Methods: Ex vivo experimental analytical study. Ten fresh frozen human knees were dissected leaving FCL and CPN in situ. Shortest distance from the centre of the FCL distal tunnel and CPN was measured (antero-posterior and proximal-distal wire-nerve distances) at 90°, 60°, 30°, and 0° of knee flexion. Measurements between different flexion angles were compared and correlation between knee flexion angle and distance was identified. Results: The mean distance between the FCL tunnel and the CPN at 90° were 21.15 ± 6.74 mm posteriorly (95% CI: 16.33–25.97) and 13.01 ± 3.55 mm distally (95% CI: 10.47–15.55). The minimum values were 9.8 mm posteriorly and 8.9 mm, respectively. These distances were smaller at 0° (p ≤ 0.017). At 90° of knee flexion, the mean distance from the fibular tip to the CPN distally was 23.46 ± 4.13 mm (20.51–26.41). Conclusion: Anatomic localization and orientation of fibular tunnels can be done safely while avoiding nerve neurolysis. Further studies should aim to in vivo measurements and results. [ABSTRACT FROM AUTHOR]

IntroductionThe surgical management of pathologies involving the clivus and craniocervical junction has always been considered a complex procedure because of the deeply located surgical targets and the surrounding complex neural and vascular anatomical structures. The most commonly used approaches to reach this area are the transnasal, transoral, and transcervical approaches.Material and MethodsThis approach was performed unilaterally on five cadaver heads and bilaterally on one cadaver head.ResultsWe described a modified endoscope-assisted high cervical anterolateral retropharyngeal approach in which each stage of the procedure was demonstrated on human cadavers in a step-by-step manner using endoscopic camera views. This approach was broken down into nine steps. The neurovascular structures encountered at each step and their relationships with each other are demonstrated.DiscussionThe advantages and disadvantages of our modified approach were compared to the conventional transcervical, transoral, and endoscopic endonasal approaches.

Adipofascial flaps have proven to be an excellent tool for multipurpose reconstruction as free or pedicled flaps. The anatomical studies in this field are now focused on improving esthetics in reconstruction while maintaining a minimal donor site morbidity. An anatomical cadaver study has been carried out to investigate the medial thigh region as a potential donor site for adipofascial flaps.Eighteen thighs from fresh cadavers were dissected and a new territory with autonomous vascular supply was defined through vascular injection, anatomical dissection, transillumination, and angiography. Cutaneous access was made in a “T” shape. The fascia harvests had to be centered on the adductor longus and gracilis muscles bearing in mind the position of the flap pedicle. The fascial flap was isolated from adductor longus and gracilis muscles and isolated on his pedicle (medial circumflex femoral artery).After our anatomical study, we used the flap in 2 clinical cases. The results of our anatomical study and clinical cases confirmed the suitability and reliability of a new flap: the “Medial Fascia Lata Flap.” Flap size ranged from 20 to 25 cm and has the advantage of preserving the functionality of the thigh muscles. The study showed that the “Medial Fascia Lata Flap” is easy to harvest, and the resulting scar is concealed. In consideration of its suitability, reliability and aesthetical advantages, it could be proposed as a good option in selected cases.

Background and Objectives: Many risk factors for postoperative C5 palsy (PC5P) have been reported regarding a “cord shift” after a posterior approach. However, there are few reports about shoulder traction as a possible risk factor of anterior cervical surgery. Therefore, we assessed the stretched nerve roots when shoulder traction was applied on cadavers. Materials and Methods: Eight cadavers were employed in this study, available based on age and the presence of foramen stenosis. After dissecting the sternocleidomastoid muscle of the cadaver, the shoulder joint was pulled with a force of 2, 5, 8, 10, 15, and 20 kg. Then, the stretched length of the fifth nerve root was measured in the extra-foraminal zone. In addition, the same measurement was performed after cutting the carotid artery to accurately identify the nerve root’s origin. After an additional dissection was performed so that the superior trunk of the brachial plexus could be seen, the stretched length of the fifth and sixth nerve roots was measured again. Results: Throughout the entire experiment, the fifth nerve root stretched out for an average of 1.94 mm at 8 kg and an average of 5.03 mm at a maximum force of 20 kg. In three experiments, the elongated lengths of the C5 nerve root at 8 kg and 20 kg were 1.69/4.38 mm, 2.13/5.00 mm, and 0.75/5.31 mm, respectively, and in the third experiment, the elongated length of the C6 nerve root was 1.88/5.44 mm. Conclusions: Although this was a cadaveric experiment, it suggests that shoulder traction could be the risk factors for PC5P after anterior cervical surgery. In addition, for patients with foraminal stenosis and central stenosis, the risk would be higher. Therefore, the surgeon should be aware of this, and the patient would need sufficient explanation.

Aim: This study focuses on the Superior Temporal Sulcus (STS), a crucial structure in the brain that delineates the anatomical boundary between the superior and medial temporal gyri. The STS is significant in social cognition, particularly in tasks involving cognitive empathy and perspective-taking. Understanding its anatomical relationship with superficial skull landmarks is vital for cranial surgery and surgical planning. Materials and Methods: The study involved an in-depth examination of the STS in sixteen adult human brains, totaling 32 hemispheres. The research included detailed measurements of sulcal lengths, assessments of sulcal depths, and observations of segment and branch variations within the STS. Results: The continuous pattern was observed in 28.6% (4 cases) of the left hemisphere and 71.4% (10 cases) in the right hemisphere. The interrupted pattern was identified in 55.6% (5 cases) of the left hemisphere and 44.4% (4 cases) in the right hemisphere. The temporal pole pattern was present in 77.8% (7 cases) of the left hemisphere and 22.2% (2 cases) in the right hemisphere. The number of segments in STS showed significant variation across these pattern types, with a p-value of 0.0001, indicating statistical significance. Conclusion: A comprehensive understanding of the STS's anatomy is essential for neurosurgeons as it serves as a critical guide in navigating cerebral pathologies. The anatomical and cadaveric studies substantially deepen our comprehension of the STS's structural variations, thereby enriching the field's knowledge base and potentially facilitating the refinement of neurosurgical planning processes. This research highlights the critical significance of the STS within clinical and neuroscientific frameworks, particularly its vital contribution to neurosurgical procedures. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to evaluate the relationship between the Löwenstein Lateral view and the True Lateral view for the positioning of the cephalic hip screw, through a cadaveric study. Materials and Methods: We placed two Kirschner wires in eight femur specimens using an Antero-Posterior view, Löwenstein Lateral view and True Lateral view. The distances between the Kirschner wires and the anterior, posterior, superior and inferior cortex were measured in all projections. The head of the femur was then sectioned, and the same macroscopic distances were measured. Finally, we could calculate the accuracy of the two radiographic lateral projections. Results: When the Kirschner wire was placed in the center of the head using the Antero-Posterior and the True Lateral view, the accuracy of Antero-Posterior view was 0.9705 while the accuracy of True Lateral view and Löwenstein Lateral view was 1.1479 and 1.1584, respectively. When the Kirschner wire was placed superior on the Antero-Posterior and centrally on the True Lateral view, the accuracy of Antero-Posterior view was 0.9930 while the accuracy of True Lateral view and Löwenstein Lateral view was 1.1159 and 0.7224, respectively. Conclusion: When the Kirschner wire was positioned proximal in Antero-Posterior view and central in True Lateral view, only the True Lateral view showed high accuracy. [ABSTRACT FROM AUTHOR]

This study aims to evaluate the reliability and validity of using MyotonPRO to quantify the mechanical properties of the muscle-tendon unit through in vivo measurements and preliminary in situ measurements using formalin-fixed tissues. The mechanical properties of gastrocnemii and the Achilles tendon of 12 healthy adults (six males and six females, 34.9 ± 5.8 years) were examined for in vivo test twice within a day and once post-24 hours using MyotonPRO, while nine human cadavers (formalin-fixed, 3 males and 6 females, 89.9 ± 5.1 years) were assessed for preliminary in situ test with identical time schedule to evaluate the within-day and inter-day reliability and validity. In vivo tests had very high within-day (ICC: 0.96–0.99) and inter-day reliability (ICC: 0.83–0.96), while in situ tests (formalin-fixed tissues) showed high within-day (ICC: 0.87–0.99) and inter-day reliability (ICC: 0.76–0.98) for the results of tone and stiffness. There was no significant difference in the stiffness of the free part of the Achilles tendon between in vivo and in situ conditions. The stiffness of the lateral gastrocnemius (r = 0.55, p = 0.018), proximal part of the Achilles tendon (r = 0.56, p = 0.015), and free part of the Achilles tendon (r = 0.47, p = 0.048) before removing the skin was significantly correlated with that after removing the skin condition. The findings of the current study suggest that MyotonPRO is reliable and valid for evaluating tendon stiffness both in vivo and in situ (formalin-fixed tissues). [ABSTRACT FROM AUTHOR]

Objective: This cadaveric study delves into the morphology of the femoral nerve, focusing on its formation, associations with neighboring structures, and the intricacies of its branching pattern within the Jharkhand population. This investigation aims to delineate the variations and anomalies that may exist in the branching of the femoral artery, enhancing our comprehension of vascular anatomy. Such knowledge is instrumental in clinical practice, surgical procedures, and diagnostic interventions related to the lower limb, ultimately promoting a deeper understanding of the intricate vascular network in this anatomical region. Methods: Using cadaveric dissections, this research meticulously examined the femoral nerve, mapping its course, relationships with adjacent structures, and recording the branching pattern specific to individuals in the Jharkhand region. Results were statistically analyzed. Results: Researchers dissected 90 femoral triangles from 45 cadavers, finding the profunda femoris artery typically 30-43 mm from the center of the inguinal ligament on both sides. It was observed that the profunda femoris artery primarily arising from the back and outer side of the femoral artery (59%-65.5%). The LCFA usually originating from the Profunda Femoris Artery (68%-72%). MCFA's varied distance from the Profunda Femoris Artery, with 40%-44% within 0-15mm. Conclusion: The findings in the research article collectively contribute comprehensive insights into the arterial patterns within the femoral triangle. The consistent observations regarding the (PFA) source and its association with other arteries establish crucial anatomical reference points. These insights are invaluable for medical practitioners, aiding in surgical planning, diagnostic assessments, and enhancing the understanding of this critical anatomical region for clinical applications. [ABSTRACT FROM AUTHOR]

Study Design: Cadaveric specimens. Objective: To perform a pathomorphological analysis of the degree of facet joint (FJ) degeneration utilizing fresh cadaveric models and correlating these structural changes with imaging findings. Methods: L1-L5 FSU including all tissue between the anterior longitudinal ligament to the posterior spinal structures were obtained on 28 patients at a mean of 5.7 hours post-mortem. The samples were fixed in an agar medium and CT and MRI were performed. The level of FJ degeneration was identified based on prior classifications Osteoarthritis Research Society International (OARSI), as was the facet angle and tropism. Pathomorphological assessment including articular cartilage cell density was performed according to prior established methodology. Results: Radiographically, a direct association was identified between FJ degeneration and patient age. Facet angle and tropism did not significantly vary by patient age. Pathomorphologically, there was a decrease in the cellular density of articular cartilage with increasing patient age. Similarly, there was a significant direct correlation between radiographic degree of degenerative changes in FJs with the age of cadavers and the degree of degeneration of FJs according to the morphological classification of OARSI, as well as a significant inverse correlation with cell density. Conclusion: A comprehensive assessment of various signs of FJ degeneration using cadaveric material has established that, based on radiographic imaging, it is possible to assess the microstructural state of FJ, including at an early stage of the disease. This data may be useful for surgeons in guiding therapeutic strategies based on individual biometric parameters of the FJ. [ABSTRACT FROM AUTHOR]

Background: Combining osteotomies and soft tissue procedures is believed to reduce sesamoids in their anatomical position and maintain long-term correction when treating hallux valgus deformity. This study determines if a radiologic association exists between a radiolucent sign and a full percutaneous adductor tendon release (PATR), including a cadaveric study and a consecutive case series. Another aim was to determine the intra- and interobserver reliability of these observations. Methods: A prospective observational study was made between 2018 and 2019. First, a PATR was done on cadaveric specimens and, after the procedures, dissected to correlate what was seen fluoroscopically. The clinical group included 39 feet that presented mild-to-moderate HV deformity and were treated with percutaneous osteotomies associated with PATR. Results: Observers 1 and 2 saw a radioscopic radiolucent sign in 100% of cadavers and the patient population. They also observed a triangle-shaped image with an incidence of 75%, which we have named the "triangle sign." Conclusion: The triangle sign may be helpful in the intraoperative confirmation of PATR and latero-plantar capsule release using this percutaneous technique. [ABSTRACT FROM AUTHOR]

Background: Approach need to be considered when surgeons dealt with complex elbow injuries and the choice of the approach is a challenge for surgeons due to the complex anatomy. On the basis of releasing the lateral collateral ligament, we modified the dislocation technique to pursue the superior exposure including not only the distal humeral surface but also the anterior facet of the coronoid process. Methods: A total of 4 cadaver specimens and 8 elbows were included in the study. Each cadaver provided one elbow for either the elbow dislocation approach or the posterior olecranon approach. The exposed distal articular surface of humerus, humeral capitulum, humeral trochlea, anterior trochlea of distal humerus, posterior trochlea of distal humerus and the ulnar coronoid process surface were marked by image J software and calculated for a comparison for each surgical approach. Results: The total distal humeral surface was exposed as a median of 98.2 (97.6, 99.6)% and 62.0 (58.3, 64.5)% for the elbow dislocation approach and the olecranon osteotomy approach (P < 0.001), the capitulum 100% and 32.4 (28.0, 39.2)% (P < 0.001), the trochlea 93.2(90.1, 96.9)% and 72.5 (65.2, 78.8)% (P < 0.001), the anterior trochlear articular surface 96.0(93.0, 97.4)% and 50.3 (43.6, 59.1)% (P < 0.001), the posterior trochlear articular surface 95.4 (93, 100)% and 100% (P = 0.76) and the articular surface of the coronoid process of ulna 71.3 (66.0, 74.2)% and 0% (P < 0.001). Conclusion: For complex elbow fractures, the technique of elbow dislocation provides complete exposure of the distal humerus surface and a significant portion of the coronoid process surface, facilitating direct visualization for reduction and fixation. Level of evidence Anatomy Study; Cadaver Dissection. [ABSTRACT FROM AUTHOR]

Background: Surgical treatments for chronic posterosuperior massive rotator cuff tear (MRCT) are still controversial. Superior capsular reconstruction (SCR), which provides a static stabilizer to decrease superior humeral head translation, and lower trapezius tendon transfer (LTTT) with centralization of the humeral head, which prevents superior humeral head migration, are potential surgical options. To date, SCR combined with LTTT has not been fully investigated. Hypothesis: Restoration of static stabilizer and dynamic stabilizer together would effectively improve shoulder kinematics in posterosuperior MRCT. Study Design: Controlled laboratory study. Methods: A custom-made shoulder mechanics testing system was used to test 8 fresh-frozen cadaveric shoulders. The testing conditions were as follows: (1) intact; (2) posterosuperior MRCT (supraspinatus and infraspinatus removed); (3) SCR using the fascia lata; (4) LTTT; and (5) SCR combined with LTTT. The total rotational range of motion (ROM), superior translation, anteroposterior translation, and peak subacromial contact pressure were evaluated at 0°, 30°, and 60° of shoulder abduction. Repeated-measures analysis of variance and Tukey post hoc tests were performed. Results: The total rotational ROM, superior translation, anteroposterior translation, and peak subacromial contact pressure increased in posterosuperior MRCTs (all, P <.05). The rotational ROM, superior translation, anteroposterior translation, and peak subacromial contact pressure at 0° and 30° of shoulder abduction decreased in SCR (all, P <.05). However, there was no significant improvement in rotational ROM, superior translation, and peak subacromial contact pressure at 60° of shoulder abduction (P >.05). LTTT resulted in a significant decrease in the superior translation, anteroposterior translation, and peak subacromial contact pressure at 0°, 30°, and 60° of shoulder abduction (P <.05). SCR combined with LTTT restored the total rotational ROM, superior translation, anteroposterior translation, and peak subacromial contact pressure at 0°, 30°, and 60° of shoulder abduction (all, P <.05). Conclusion: In the cadaveric model, SCR combined with LTTT showed improved shoulder kinematics and contact pressures in the posterosuperior MRCT model compared with SCR or LTTT alone. Clinical Relevance: SCR combined with LTTT may be regarded as an alternative surgical procedure for posterosuperior MRCTs. [ABSTRACT FROM AUTHOR]

Abstract Background To investigate the accuracy and safety of a newly constructed robotic arm which can cover the whole process of THA, we performed a series of robot-assisted total hip replacement on the cadaver. Methods Fifteen frozen cadaveric specimens (30 hips) were used for this study. In this investigation, united hip system and Longwell robotic-assisted system were used. The entire lower limb was CT scanned prior to surgery. The 3D model was produced based on CT data; the site of the prosthesis, including acetabular anteversion, inclination angle, and the position of femoral prosthesis, was planned. With the assistance of a robotic arm, the surgeon changed the parameters based on the preoperative plan and the actual condition during surgery, and completed the whole procedure. Following surgery, we measured the acetabular anteversion angle, acetabular inclination angle, femur anteversion angle, combined anteversion angle, stem angulation, and canal fill ratio. Results The parameters proved that the acetabular anteversion angle was 16.85 ± 3.00°, the acetabular inclination angle was 40.38 ± 5.37°, femur anteversion angle was 15.90 ± 9.01°, combined anteversion angle was 32.75 ± 9.03°, stem angulation was 1.84 ± 0.99°, and leg length discrepancy was 2.47 ± 1.43 mm. The canal fill ratio (CFR) of femoral prosthesis of osteotomy line in sagittal section is 99.72 ± 1.54% and in coronal section is 62.94 ± 8.91%; below osteotomy line 2.5 cm in sagittal section is 100.00% and in coronal section is 81.48 ± 12.94%; below osteotomy line 7.5 cm in sagittal section is 59.51 ± 12.94% and in coronal section is 89.79 ± 11.13%; femoral shaft isthmus in sagittal section is 56.41 ± 13.80% and in coronal section is 84.95 ± 15.17%. Conclusion The accuracy and safety of this novel robotic arm are suitable for preparing both the acetabular and femoral sides, providing evidence for clinical trial.

Objective: The purpose of this study was to describe the relationship between the supratrochlear artery (STA) and the medial canthus (MC) in fresh frozen cadavers. Methods: Eighteen fresh frozen cadaver heads (36 hemifaces) were dissected meticulously to explore the STA. After the STA was dissected, its relationship with medial canthus and its distance and location to an imaginary vertical line drawn vertically from the most medial point of the medial canthus were analyzed. Results: Out of 36 hemifaces, on 14 sides, the exit of the STA was just lateral but touching the vertical line at the MC. On 22 sides, the STA was located lateral to the vertical line. No STA was located medial to the vertical line. Conclusion: The MC was the most medial point for supratrochlear artery. Therefore, the medial canthus can be accepted as a reliable landmark for fap design. To be on the safe side, the fap medial arm should be designed a few milimeters medial to the MC. [ABSTRACT FROM AUTHOR]

Anterior–posterior (AP) stability is an important measure of knee performance after total knee arthroplasty (TKA). To improve the stabilizing effect of implants designed to compensate for the loss of the cruciate ligaments, it is important to understand the tibiofemoral contact situation within the native ligamentous situation of the knee and how it changes after cruciate ligament resection. This in vitro study introduces a new approach to accurately measure the tibiofemoral kinematics in a six-degrees-of-freedom joint motion simulator by tracking landmark-based coordinate systems and their corresponding bone geometries. The tibiofemoral contact situation was investigated by projecting the medial and lateral flexion facet centers onto the tibial plateau under AP shear forces across various flexion angles in thirteen knees. Tests were conducted pre- and post-cruciate ligament resection. Post-cruciate ligament resection, the femoral condyles shifted closer to or even exceeded the posterior border of the tibial plateau, but only slightly closer to the anterior border. This study presents a new methodology for measuring the tibiofemoral kinematics that can be applied to multiple loading profiles. It provides a basis for further investigations, including passive or active muscle forces, to enhance the design of total knee protheses and improve surgical outcomes.

Abstract Background Spinal manipulative therapy (SMT) clinical effects are believed to be linked to its force–time profile characteristics. Previous studies have revealed that the force measured at the patient-table interface is most commonly greater than the one applied at the clinician-patient interface. The factors explaining this force amplification remains unclear. Objective To determine the difference between the force applied to a cadaveric specimen’s thoracic spine and the resulting force measured by a force-sensing table, as well as to evaluate the relationship between this difference and both the SMT force–time characteristics and the specimens’ characteristics. Methods Twenty-five SMTs with different force–time profiles were delivered by an apparatus at the T7 vertebra of nine human cadaveric specimens lying prone on a treatment table equipped with a force plate. The difference between the force applied by the apparatus and the resulting force measured by the force plate was calculated in absolute force (Fdiff) and as the percentage of the applied force (Fdiff%). Kinematics markers were inserted into T6 to T8 spinous and transverse processes to evaluate vertebral displacements during the SMT thrusts. Mixed-effects linear models were run to evaluate the variance in Fdiff and Fdiff% explained by SMT characteristics (peak force, thrust duration and force application rate), T6 to T8 relative and total displacements, and specimens’ characteristics (BMI, height, weight, kyphosis angle, thoracic thickness). Results Sixty percent of the trials showed lower force measured at the force plate than the one applied at T7. Fdiff¸ was significantly predicted (R2 marginal = 0.54) by peak force, thrust duration, thoracic thickness and T6–T7 relative displacement in the z-axis (postero-anterior). Fdiff% was significantly predicted (R2 marginal = 0.56) by force application rate, thoracic thickness and total T6 displacements. For both dependant variables, thoracic thickness showed the highest R2 marginal out of all predictors. Conclusion Difference in force between the clinician-patient and the patient-table interfaces is influenced by SMT force–time characteristics and by thoracic thickness. How these differences in force are associated with vertebral displacements remains unclear. Although further studies are needed, clinicians should consider thorax thickness as a possible modulator of forces being transmitted through it during prone SMT procedures.

Aims: When performing revision total hip arthroplasty using diaphyseal-engaging titanium tapered stems (TTS), the recommended 3 to 4 cm of stem-cortical diaphyseal contact may not be available. In challenging cases such as these with only 2 cm of contact, can sufficient axial stability be achieved and what is the benefit of a prophylactic cable? This study sought to determine, first, whether a prophylactic cable allows for sufficient axial stability when the contact length is 2 cm, and second, if differing TTS taper angles (2° vs 3.5°) impact these results. Methods: A biomechanical matched-pair cadaveric study was designed using six matched pairs of human fresh cadaveric femora prepared so that 2 cm of diaphyseal bone engaged with 2° (right femora) or 3.5° (left femora) TTS. Before impaction, three matched pairs received a single 100 lb-tensioned prophylactic beaded cable; the remaining three matched pairs received no cable adjuncts. Specimens underwent stepwise axial loading to 2600 N or until failure, defined as stem subsidence > 5 mm. Results: All specimens without cable adjuncts (6/6 femora) failed during axial testing, while all specimens with a prophylactic cable (6/6) successfully resisted axial load, regardless of taper angle. In total, four of the failed specimens experienced proximal longitudinal fractures, three of which occurred with the higher 3.5° TTS. One fracture occurred in a 3.5° TTS with a prophylactic cable yet passed axial testing, subsiding < 5 mm. Among specimens with a prophylactic cable, the 3.5° TTS resulted in lower mean subsidence (0.5 mm (SD 0.8)) compared with the 2° TTS (2.4 mm (SD 1.8)). Conclusion: A single prophylactic beaded cable dramatically improved initial axial stability when stem-cortex contact length was 2 cm. All implants failed secondary to fracture or subsidence > 5 mm when a prophylactic cable was not used. A higher taper angle appears to decrease the magnitude of subsidence but increased the fracture risk. The fracture risk was mitigated by the use of a prophylactic cable. Cite this article: Bone Jt Open 2023;4(7):472–477.