Search

During the harvesting of cut-stem vegetables, the structural parameters of cutters have an important influence on the harvesting effect. Structural parameters of stalks directly affect the cutting effect of the cutter. The thickness of the stalk xylem has a strong influence on the cutting stability and cutting surface effect of the cutter. In this paper, the effect of the broccoli stalk xylem on conventional toothless cutters was investigated using broccoli stalks as the cutting object. It was found that a thicker xylem leads to shear force fluctuations, which in turn affects the smooth operation of the cutting device. Taking locust mouthparts as the research object, a bionic multi-tooth cutting method is proposed in this paper to obtain the contour curve based on the locust upper jaw cutting tooth lobe. By establishing the regression equation, the contour curve of the cutting teeth is fitted accurately. The cutter edge is designed with the locust's maxillary incisive lobe as the bionic object. ANSYS software was used to simulate the cutting of a double disc cutter and broccoli stalk. The effect of each factor was analyzed by response-surface regression to determine the optimal cutter speed, machine forward speed, cutting inclination, blade overlap, and optimal cutting position. The cutting test is verified via broccoli stalks and a cutting test bench to further determine the cutting device operating parameters. The optimal operating parameters of the cutting device were 0.239 m/s forward speed, 30.974-degree cutting edge angle, 10.066 mm blade overlap, and 467.511 rpm. [ABSTRACT FROM AUTHOR]

During the harvesting of cut-stem vegetables, the structural parameters of cutters have an important influence on the harvesting effect. Structural parameters of stalks directly affect the cutting effect of the cutter. The thickness of the stalk xylem has a strong influence on the cutting stability and cutting surface effect of the cutter. In this paper, the effect of the broccoli stalk xylem on conventional toothless cutters was investigated using broccoli stalks as the cutting object. It was found that a thicker xylem leads to shear force fluctuations, which in turn affects the smooth operation of the cutting device. Taking locust mouthparts as the research object, a bionic multi-tooth cutting method is proposed in this paper to obtain the contour curve based on the locust upper jaw cutting tooth lobe. By establishing the regression equation, the contour curve of the cutting teeth is fitted accurately. The cutter edge is designed with the locust’s maxillary incisive lobe as the bionic object. ANSYS software was used to simulate the cutting of a double disc cutter and broccoli stalk. The effect of each factor was analyzed by response-surface regression to determine the optimal cutter speed, machine forward speed, cutting inclination, blade overlap, and optimal cutting position. The cutting test is verified via broccoli stalks and a cutting test bench to further determine the cutting device operating parameters. The optimal operating parameters of the cutting device were 0.239 m/s forward speed, 30.974-degree cutting edge angle, 10.066 mm blade overlap, and 467.511 rpm.

In this study, three mesoporous activated carbons prepared from vegetable residues were used to remove acid, basic, and direct dyes from aqueous solutions, and reactive and vat dyes from textile wastewater. Granular carbons obtained by chemical activation at 673 K with phosphoric acid from prickly pear peels (CarTunaQ), broccoli stems (CarBrocQ), and white sapote seeds (CarZapQ) were highly efficient for the removal of dyes. Adsorption equilibrium studies were carried out in batch systems and treated with Langmuir and Freundlich isotherms. The maximum adsorption capacities calculated from the Langmuir isotherms ranged between 131.6 and 312.5 mg/g for acid dyes, and between 277.8 and 500.0 mg/g for basic dyes at 303 K. Our objective in this paper was to show that vegetable wastes can serve as precursors for activated carbons that can be used for the adsorption of dyes. Specifically CarBrocQ was the best carbon produced for the removal of textile dyes. The color removal of dyes present in textile wastewaters was compared with that of a commercial powdered carbon, and it was found that the carbons produced using waste material reached similar efficiency levels. Carbon samples were characterized by bulk density, point of zero charge, thermogravimetric analysis, elemental analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, methylene blue adsorption isotherms at 303 K, and nitrogen adsorption isotherms at 77 K (S BET ). The results show that the activated carbons possess a large specific surface area (1025–1177 m 2 /g) and high total pore volume (1.06–2.16 cm 3 /g) with average pore size diameters between 4.1 and 8.4 nm. Desorption and regeneration tests were made to test the viability of reusing the activated carbons. [ABSTRACT FROM AUTHOR]