Search

Chemical methods for the extraction and refinement of technologically critical rare earth elements (REEs) are energy-intensive, hazardous, and environmentally destructive. Current biobased extraction systems rely on extremophilic organisms and generate many of the same detrimental effects as chemical methodologies. The mesophilic methylotrophic bacterium Methylobacterium extorquens AM1 was previously shown to grow using electronic waste by naturally acquiring REEs to power methanol metabolism. Here we show that growth using electronic waste as a sole REE source is scalable up to 10 L with consistent metal yields without the use of harsh acids or high temperatures. The addition of organic acids increases REE leaching in a nonspecific manner. REE-specific bioleaching can be engineered through the overproduction of REE-binding ligands (called lanthanophores) and pyrroloquinoline quinone. REE bioaccumulation increases with the leachate concentration and is highly specific. REEs are stored intracellularly in polyphosphate granules, and genetic engineering to eliminate exopolyphosphatase activity increases metal accumulation, confirming the link between phosphate metabolism and biological REE use. Finally, we report the innate ability of M. extorquens to grow using other complex REE sources, including pulverized smartphones, demonstrating the flexibility and potential for use as a recovery platform for these critical metals.

Copyright of Nonferrous Metals (Extractive Metallurgy) is the property of Beijing Research Institute of Mining & Metallurgy Technology Group and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Introduction: Currently, there are few investigations on the effect of a synthetic exogenous quorum sensing (QS) agonist on the bioleaching rate of Acidithiobacillus thiooxidans (A. thiooxidans). Methods: We created AHL (N-acyl-homoserine lactone) analogues and investigated their effects on A. thiooxidans biofilm formation, adsorption kinetics, bioleaching, and mechanism. Results: The findings revealed that N-(3-thiolactone)- dodecylamine (Y3) significantly increased the biofilm formation of A. thiooxidans in 96-well plates and sulfur sheets. Adsorption tests revealed that Y3 increased the adhesion rate, adsorption constant, and adsorption efficiency. Bioleaching tests indicated that Y3 boosted bioleaching efficiency, with Ni2+ and Cu2+ bioleaching rates increasing by 49.13% and 33.03%, respectively. Transcriptomic analysis revealed that Y3 increased genes associated with QS pathways and biofilm formation, particularly afeI, which was dramatically elevated 42 times. Discussion: The study laid the groundwork for a better understanding of the mechanics of A. thiooxidans biofilm formation, which could help improve the potential application of A. thiooxidans in bioleaching. [ABSTRACT FROM AUTHOR]

The integration of lithium into technological applications has profoundly influenced human development, particularly in energy storage systems like lithium-ion batteries. With global demand for lithium surging alongside technological advancements, the sustainable extraction and recovery of this critical material have become increasingly vital. This paper explores lithium's role, its chemical properties, and the environmental and economic considerations associated with its extraction and recovery. We examine various lithium recovery methods, including conventional techniques such as hydrometallurgy, pyrometallurgy, and direct physical recycling, as well as emerging technologies like mechanochemistry, ion pumping, and bioleaching while emphasizing the need for sustainable practices to address environmental challenges. The review also discusses the challenges and future directions of lithium recovery. Advances in technology have streamlined lithium recovery processes and spurred the development of innovative extraction techniques. This paper concludes with an emphasis on further research essential to deepen our understanding of lithium recovery methods, their strengths and limitations, and the need to explore new strategies to meet the growing global demand for this indispensable resource. [ABSTRACT FROM AUTHOR]

The continuous dumping of industrial solid wastes into the immediate environment is incommodious since these waste materials cause pollution and serious hazards to human health. In addition, these solid wastes are complex and consist of toxic chemical substances, heavy metals, and valuable metals, hence warranting treatment before disposal. Bioleaching is a green and sustainable technology for the solubilization and mobilization of metals from solid matrices. The leaching efficacy is contingent on the types and physiology of the organisms, the elemental content of the solid wastes, and the presence of appropriate bioprocess parameters at optimum conditions. Extremophilic microbes, including thermophiles, acidophiles, alkaliphiles, and halophiles, are recognized as excellent biological agents for the efficient bioextraction of metals from industrial solid wastes due to their aptitude for survival under harsh bioleaching conditions. Therefore, this review provides insights into the employability of extremophilic microorganisms as a biofactory for the recovery of valuable metals from various industrial solid wastes. More so, it discusses the sustainability of the bioleaching technique in terms of its life cycle assessment (LCA) and techno-economic analysis. [ABSTRACT FROM AUTHOR]

In this study, the contact effects between mesophile bacteria and minerals were observed to enhance the bioleaching kinetics, which demonstrated that the adsorption of bacteria to mineral surfaces could improve the dissolution of arsenic and copper. The microstructure results also demonstrated that after the contact bioleaching, residue surfaces were rougher and with more corrosion bars and pits. Compared to contact oxidation approach, ferric ions, acting as the only oxidants in the non-contact bioleaching process, play a more important role in the copper extraction and arsenic dissolution, which is consistent with the previous works about indirect leaching mechanism. Due to the presence of various mesophiles in the contact oxidation, their activities and corresponding preferences for energy sources influenced by temperature were observed, causing differences in the sulfides' dissolution: ferrous ions were inclined to be oxidized biologically at 30 °C, whereas sulfide minerals, including enargite, were preferentially oxidized at 45 °C. [ABSTRACT FROM AUTHOR]

Given the current highest demand in history for raw materials, there is a growing demand for the recovery of key metals from secondary sources, in order to prevent metal depletion and to reduce the risk of toxic discharges into the environment. This paper focuses on the current nature-based solutions (i.e., biomining and bioleaching) applied to resource recovery (metals) from solid matrices. Biomining exploits the potential of microorganisms to facilitate the extraction and recovery of metals from a wide range of waste materials as an interesting alternative, replacing primary raw materials with secondary material resources (thus improving metal recycling rates in the context of the circular economy). Special attention was paid to the analysis of metal biomining from a process sustainability perspective. In this regard, several supporting tools (e.g., life cycle assessment, LCA), developed to assist decision-makers in the complex process of assessing and scaling-up remediation projects (including biomining), were discussed. The application of LCA in biomining is still evolving, and requires comprehensive case studies to improve the methodological approach. This review outlines the fact that few studies have focused on demonstrating the environmental performance of the biomining process. Also, further studies should be performed to promote the commercial opportunities of biomining, which can be used to recover and recycle metals from solid matrices and for site remediation. Despite some important disadvantages (poor process kinetics; metal toxicity), biomining is considered to be a cleaner approach than conventional mining processes. However, implementing it on a large scale requires improvements in regulatory issues and public acceptance. [ABSTRACT FROM AUTHOR]

Abstract Mine waste can be transformed into technosol as an ecological strategy. Despite its importance to soil functions, biological activity is often overlooked. Biopolymers can serve as innovative tools for bioremediation, facilitating chemical reactions and creating networks to encapsulate contaminants. This work aims to assess the use of bioleached and stabilised residues from a tungsten mine for technosol production. The first objective was to evaluate mine tailings for their bioleaching potential by biostimulation or bioaugmentation with strain Diaphorobacter polyhydroxybutyrativorans B2A2W2. The second was to evaluate the effect of Portland cement or biopolymers such as Carboxymethyl Cellulose (CMC) or Xanthan Gum (XG) on the stabilisation of bioleached residues. The impact of biopolymers on residues’ characteristics, such as metal leaching, number of cultivable microorganisms, compression strength and ecotoxicity was evaluated using flow systems. Over time, bioleached metallic elements decreased, except for iron (Fe). Biostimulated and stabilised residues exhibited similar trends; both CMC and cement showed low leaching rates and viable microorganisms in the same order (106 CFU × ml−1). However, bioaugmented residue stabilised with XG showed 106 CFU × ml−1 viable microorganisms and increased 2.2-fold Fe leaching than BA_Control. CMC addition to bioaugmented residue reduced 5.9-fold Fe leaching and increased 100-fold viable microorganisms. By utilising both biological and engineering approaches to characterise the technosol, this study contributes to advancing knowledge of technosol production. The residues biostimulated and stabilised with CMC produced a material useful for bio-applications, with low toxicity and metal leaching, useful for bio-applications. XG was the best stabiliser for geotechnical engineering applications, with improved compression strength. In conclusion, the study demonstrates the usefulness of biopolymer treatment for residues and emphasises the importance of selecting the appropriate biopolymer for the intended function of technosols.

Boric acid is a dilute or mild acid derived from boron, and it is available in a water-soluble form as a white powder. Strong acids are generally preferred to remove ash and sulfur from coal. However, consumption of these strong acids harms the environment. Therefore, it is necessary to improve the leaching possibilities of weak acids. Also, a combination of beneficiation methods may need to be used to achieve the desired quality and environmental compatibility of coal. In this study, a combination of bioleaching and chemical experiments was employed to eliminate ash and sulfur from Sivas Kangal lignite coal. Initially, bioleaching experiments were conducted on lignites with high ash and sulfur contents by bioreactor with Acidithiobacillus ferrooxidans. Following this, in the second phase of experiments, boric acid leaching was employed to beneficiate Sivas/Turkey lignites through chemical methods. Additionally, the effect of glycerol on the leaching efficiency of boric acid, which is a weak acid, was investigated. Experimental findings have shown that combination methods provide better results in ash and sulfur removal from lignite coal. Finally, a clean coal product with 19.80% ash and 2.89% S content was obtained by combination methods to the lignite coal (46.60% ash and 4.99% S). [ABSTRACT FROM AUTHOR]

The heavy metal contamination in river and lake sediments endangers aquatic ecosystems. Herein, the feasibility of applying different exogenous mesophile consortiums in bioleaching multiple heavy metal-contaminated sediments from Xiangjiang River was investigated, and a comprehensive functional gene array (GeoChip 5.0) was used to analyze the functional gene expression to reveal the intrinsic association between metal solubilization efficiency and consortium structure. Among four consortiums, the Acidithiobacillus thiooxidans and Leptospirillum ferrooxidans consortium had the highest solubilization efficiencies of Cu, Pb, Zn, and Cd after 15 days, reaching 50.33, 29.93, 47.49, and 79.65%, while Cu, Pb, and Hg had the highest solubilization efficiencies after 30 days, reaching 63.67, 45.33, and 52.07%. Geochip analysis revealed that 31,346 genes involved in different biogeochemical processes had been detected, and the systems of 15 days had lower proportions of unique genes than those of 30 days. Samples from the same stage had more genes overlapping with each other than those from different stages. Plentiful metal-resistant and organic remediation genes were also detected, which means the metal detoxification and organic pollutant degradation had happened with the bioleaching process. The Mantel test revealed that Pb, Zn, As, Cd, and Hg solubilized from sediment influenced the structure of expressed microbial functional genes during bioleaching. This work employed GeoChip to demonstrate the intrinsic association between functional gene expression of mesophile consortiums and the bioleaching efficiency of heavy metal-contaminated sediment, and it provides a good reference for future microbial consortium design and remediation of river and lake sediments. [ABSTRACT FROM AUTHOR]

Chalcopyrite ores are processed mostly by pyrometallurgical techniques due to the refractory nature of the mineral to the current hydrometallurgical techniques. In order to overcome such refractoriness, pretreatment steps such as sulfurization may be applied to produce different copper phases and therefore improve the metal dissolution in the leaching step. The current study investigated the reaction products of the reaction between chalcopyrite and elemental sulfur at different chalcopyrite/sulfur ratios (1/1 and 1/2), reaction time (60 min and 90 min), and temperature (350ºC, 400°C and 450ºC). The sulfurization experiments revealed that covellite, nukundamite, bornite, and pyrite-like compounds were produced according to the experimental conditions applied. Then, the sulfurization products were submitted to chemical leaching tests at temperatures ranging from 32ºC to 70ºC, whereas bioleaching tests were also carried out with Acidithiobacillus ferrooxidans, at 32ºC. In the chemical leaching experiments at 70ºC, only 14% copper was recovered from the original chalcopyrite sample while the maximum copper extraction was 78% from bornite produced at 450ºC (90 min and mass ratio of chalcopyrite/sulfur of 1/2). On the other hand, copper extraction achieved 96% from the same sulfurization product containing synthetic bornite within 20 days of bioleaching. Bioleaching of the original chalcopyrite sample implied in a copper recovery of only 25% in the same period. Summarizing, the current work showed that chalcopyrite sulfurization at 450ºC was able to transform chalcopyrite into a bornite-like phase, which was chemically leached and bioleached by At. ferrooxidans. [ABSTRACT FROM AUTHOR]

The increased production and use of electrical and electronic equipment leads to obsolescence and disposal problems, necessitating materials recovery and recycling. This paper reports results on metal bioleaching from printed circuit boards (PCBs) using chemolithotrophic bacteria isolated at different sulphide ore biotopes in Armenia. Different ways of generating lixiviants were investigated, namely using combination of Acidithiobacillus ferrooxidans 61 and Acidithiobacillus thiooxidans SO-1 bacteria generating biogenic Fe2(SO4)3 and biogenic H2SO4. The sequence between these leaching agents permitted design of a 2-step process based on acidolysis and redoxolysis to leach non-ferrous metals from PCBs. To compare the efficiency of the sequential bioleaching of PCBs, several experimental runs were realised under the six modes at 10% pulp density. The flasks-based tests have witnessed almost complete recovery of Cu with the rest of the metals reaching extraction degree above 80%. [ABSTRACT FROM AUTHOR]

Vanadium and its derivatives are used in various industries, including steel, metallurgy, pharmaceuticals, and aerospace engineering. Although China has massive reserves of stone coal resources, these resources have low grades. Therefore, the effective extraction and recovery of metallic vanadium from stone coal is an important way to realize the efficient resource utilization of stone coal vanadium ore. Herein, Bacillus mucilaginosus was selected as the leaching strain. The vanadium leaching rate reached 35.5% after 20 d of bioleaching under optimal operating conditions. The cumulative vanadium leaching rate in the contact group reached 35.5%, which was higher than that in the noncontact group (9.3%). The metabolites of B. mucilaginosus, such as oxalic, tartaric, citric, and malic acids, dominated in bioleaching, accounting for 73.8% of the vanadium leaching rate. Interestingly, during leaching, the presence of stone coal stimulated the expression of carbonic anhydrase in bacterial cells, and enzyme activity increased by 1.335–1.905 U. Enzyme activity positively promoted the production of metabolite organic acids, and total organic acid content increased by 39.31 mg·L−1, resulting in a reduction of 2.51 in the pH of the leaching system with stone coal. This effect favored the leaching of vanadium from stone coal. Atomic force microscopy illustrated that bacterial leaching exacerbated corrosion on the surface of stone coal beyond 10 nm. Our study provides a clear and promising strategy for exploring the bioleaching mechanism from the perspective of microbial enzyme activity and metabolites. [ABSTRACT FROM AUTHOR]

Cobalt, recognized as one of the scarcest industrial metals, is typically discarded during the zinc production process in the high-temperature refining section, along with manganese. This waste product is colloquially referred to as ‘hot cake.’ The present study endeavored to segregate cobalt and manganese from the hot cake and transition them into the liquid phase via bioleaching, a method that is both economically and environmentally superior to pyrometallurgical techniques. In the hot cake, cobalt exists as Co (III) and manganese as Mn (IV). Given their oxidized states, both cobalt and manganese are insoluble in acid and necessitate reduction for dissolution. The study employed Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans bacteria to create an environment conducive to the reduction of cobalt and manganese. Under optimal conditions, this biotechnological approach facilitated the recovery of 62.8% of cobalt and 91.6% of manganese. Subsequently, a model was developed to predict the optimal method for processing cobalt from hot cake, based on the recovery rates of cobalt and manganese. This research contributes to the broader goal of resource recovery and waste minimization in the metal industry. [ABSTRACT FROM AUTHOR]

In this study, a modular, multi-step, photometric microflow injection analysis (micro-FIA) system for the automatic determination of Cu(II) in a bioreactor was developed. The system incorporates diverse 3D-printed modules, including a platform formed by a mixer module to mix Cu(II) with hydroxylamine, which reduces Cu(II) to Cu(I) linked to a diluter module via a Tesla valve, a chelation mixer module, a disperser module, and a detector module provided by an LED light source at λ = 455 nm and a light dependence resistor (LDR) as a light intensity detector. The system measures the color intensity resulting from the chelation between Cu(I) and neocuproine. The micro-FIA system demonstrated good capability for automatic and continuous Cu(II) determination, in a wide range of Cu concentrations, from 34 to 2000 mg L−1. The device exhibits a good repeatability (coefficient of variation below 2% across the measured concentration range), good reproducibility, and has an accuracy of around 100% between 600 and 1900 mg L−1. Real samples were analyzed using both the micro-FIA system and an atomic absorption spectroscopy method, revealing no statistically significant differences. Additionally, a Tesla valve located before the detector substituted a 3-way solenoid valve, eliminating the need for moving parts. [ABSTRACT FROM AUTHOR]

Iron and sulfur-oxidizing microorganisms play important roles in several natural and industrial processes. Leptospirillum (L.) ferriphilum, is an iron-oxidizing microorganism with a remarkable adaptability to thrive in extreme acidic environments, including heap bioleaching processes, acid mine drainage (AMD) and natural acidic water. A strain of L. ferriphilum (IESL25) was isolated from an industrial bioleaching process in northern Chile. This strain was challenged to grow at increasing concentrations of sulfate in order to assess changes in protein expression profiles, cells shape and to determine potential compatible solute molecules. The results unveiled changes in three proteins: succinyl CoA (SCoA) synthetase, isocitrate dehydrogenase (IDH) and aspartate semialdehyde dehydrogenase (ASD); which were notably overexpressed when the strain grew at elevated concentrations of sulfate. ASD plays a pivotal role in the synthesis of the compatible solute ectoine, which was identified along with hydroxyectoine by using matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF). The relationship between IDH, SCoA, and ectoine production could be due to the TCA cycle, in which both enzymes produce metabolites that can be utilized as precursors or intermediates in the biosynthesis of ectoine. In addition, distinct filamentous cellular morphology in L. ferriphilum IESL25 was observed when growing under sulfate stress conditions. This study highlights a new insight into the possible cellular responses of L. ferriphilum under the presence of high sulfate levels, commonly found in bioleaching of sulfide minerals or AMD environments. [ABSTRACT FROM AUTHOR]

In many European regions, both local metallic and non-metallic raw materials are poorly exploited due to their low quality and the lack of technologies to increase their economic value. In this context, the development of low cost and eco-friendly approaches, such as bioleaching of metal impurities, is crucial. The acidophilic strain Acidiphilium sp. SJH reduces Fe(III) to Fe(II) by coupling the oxidation of an organic substrate to the reduction of Fe(III) and can therefore be applied in the bioleaching of iron impurities from non-metallic raw materials. In this work, the physiology of Acidiphilium sp. SJH and the reduction of iron impurities from quartz sand and its derivatives have been studied during growth on media supplemented with various carbon sources and under different oxygenation conditions, highlighting that cell physiology and iron reduction are tightly coupled. Although the organism is known to be aerobic, maximum bioleaching performance was obtained by cultures cultivated until the exponential phase of growth under oxygen limitation. Among carbon sources, glucose has been shown to support faster biomass growth, while galactose allowed highest bioleaching. Moreover, Acidiphilium sp. SJH cells can synthesise and accumulate Poly-β-hydroxybutyrate (PHB) during the process, a polymer with relevant application in biotechnology. In summary, this work gives an insight into the physiology of Acidiphilium sp. SJH, able to use different carbon sources and to synthesise a technologically relevant polymer (PHB), while removing metals from sand without the need to introduce modifications in the process set up. [ABSTRACT FROM AUTHOR]

With a growing need to reduce greenhouse gas emissions, innovative carbon dioxide sorbents are being sought. One of the sorbents being tested is nanoparticle ferric hydrosol (FFH). In parallel with sorbent testing, it is also necessary to test the used sorbent after carbon dioxide capture (FFHCO2) and to develop an optimal method for its processing and management. The research described in this article evaluated the potential use of FFHCO2 in dewatering, coagulation and bioleaching processes. The research results indicate that the basic strategy for dealing with waste FFHCO2 sorbent should be to minimize the amount of waste by volume reduction—dewatering. Recycling of FFHCO2 as an iron waste coagulant or its processing products by bioleaching had no technological justification. It is only proposed to recover the material—iron compounds—if it is environmentally and economically justified. [ABSTRACT FROM AUTHOR]

Rare Earth Elements (REEs) are indispensable in contemporary technologies, influencing various aspects of our daily lives and environmental solutions. The escalating demand for REEs has led to increased exploitation, resulting in the generation of diverse REE-bearing solid and liquid wastes. Recognizing the potential of these wastes as secondary sources of REEs, researchers are exploring microbial solutions for their recovery. This mini review provides insights into the utilization of microorganisms, with a particular focus on microalgae, for recovering REEs from sources such as ores, electronic waste, and industrial effluents. The review outlines the principles and distinctions of bioleaching, biosorption, and bioaccumulation, offering a comparative analysis of their potential and limitations. Specific examples of microorganisms demonstrating efficacy in REE recovery are highlighted, accompanied by successful methods, including advanced techniques for enhancing microbial strains to achieve higher REE recovery. Moreover, the review explores the environmental implications of bio-recovery, discussing the potential of these methods to mitigate REE pollution. By emphasizing microalgae as promising biotechnological candidates for REE recovery, this mini review not only presents current advances but also illuminates prospects in sustainable REE resource management and environmental remediation. [ABSTRACT FROM AUTHOR]

Copyright of Environmental Science & Technology (10036504) is the property of Editorial Board of Environmental Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Hydrometallurgy of China is the property of Hydrometallurgy of China Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Recovery of the resources is considered to be a significant thing in the perspective of saving the cost economically and also for sustainable future utilization efficiently. Metals are extracted by mining processes in mines located on all over the world to consummate the needs put forth by the developing society. But mining process was found to be possessing and creating negative impact on environment during the time of mining and even after closed completely. This negative impact mainly relies on the process which is employed during the extraction of metals. Chemical methods were conventionally used from then until today for the extraction purposes. But it was reported that it has been severely affecting the surroundings. So, many mining industries started to find out the way for shifting themselves towards eco‐friendly procedures. As a result, microorganisms are employed to promote the process towards non‐polluting and naturally sustainable way. This process of using microorganisms for the extraction purposes was termed as bioleaching. It is now regarded as one of the effective ways for extraction purposes, but in limited cases. So, rather than using the chemical leaching method which highly includes chemical reactions that may be toxic or non‐toxic, this bioleaching method could be followed for its cost‐effective nature. It is a more environmentally friendly method when compared with traditional methods of industrial mining. Bacterial and Fungal species were importantly used for carrying out bioleaching. This method has now become a possible thing because of biotechnological improvements and advancements. It is also worth to note here that many researches have been going on currently to study the diversity of this concept. This article mainly aims at elucidating the overall concept of bioleaching using microorganisms in the mining industry as well as its mechanisms, applications, recent advancements and its future expectations. [ABSTRACT FROM AUTHOR]

Copyright of Journal of the Chinese Society of Rare Earths is the property of Editorial Department of Journal of the Chinese Society of Rare Earths and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The goal of the present work was to study the recovery of copper, nickel, and platinum group metals (PGMs) (Pt and Pd) from low-grade copper–nickel ore containing pyrrhotite, pentlandite, and chalcopyrite by column bioleaching followed by cyanidation. The ore sample contained the following: Ni—0.74%, Cu—0.23%, Fe—14.8%, Stotal—8.1%, and Ssulfide—7.8%. The Pt and Pd contents in the ore sample were 0.2535 and 0.515 g/t, respectively. Biological leaching in columns was carried out at 25, 35, and 45 °C for 140 days. A mixed culture of acidophilic microorganisms was used as an inoculum. Cu and Ni extraction depended on temperature, and at 45 °C, copper and nickel recovery was the highest, being 2.1 and 1.8 times higher than that at 25 °C, respectively. As a result, up to 35% of nickel and up to 10% of copper were recovered by bioleaching within 140 days. Bioleaching resulted in an increase in Pt and Pd recovery by cyanidation, but the effect on Pd recovery was insignificant. Pt recovery varied in the range of 3–40% depending on process conditions; Pd recovery was 44–55%. [ABSTRACT FROM AUTHOR]

Heavy metals (HMs) pollution is a globally emerging concern. It is difficult to cost-effectively combat such HMs polluted soil environments. The efficient remediation of HMs polluted soil is crucial to protect human health and ecological security that could be carried out by several methods. Amidst, biological remediation is the most affordable and ecological. This review focused on the principles, mechanisms, performances, and influential factors in bioremediation of HMs polluted soil. In microbial remediation, microbes can alter metallic compounds in soils. They transform these compounds into their metabolism through biosorption and bioprecipitation. The secreted microbial enzymes act as transformers and assist in HMs immobilization. The synergistic microbial effect can further improve HMs removal. In bioleaching, the microbial activity can simultaneously produce H2SO4 or organic acids and leach HMs. The production of acids and the metabolism of bacteria and fungi transform metallic compounds to soluble and extractable form. The key bioleaching mechanisms are acidolysis, complexolysis, redoxolysis and bioaccumulation. In phytoremediation, hyperaccumulator plants and their rhizospheric microbes absorb HMs by roots through absorption, cation exchange, filtration, and chemical changes. Then they exert different detoxification mechanisms. The detoxified HMs are then transferred and accumulated in their harvestable tissues. Plant growth-promoting bacteria can promote phytoremediation efficiency; however, use of chelants have adverse effects. There are some other biological methods for the remediation of HMs polluted soil environment that are not extensively practiced. Finally, the findings of this review will assist the practitioners and researchers to select the appropriate bioremediation approach for a specific soil environment.

Uranium, a cornerstone for nuclear energy, facilitates a clean and efficient energy conversion. In the era of global clean energy initiatives, uranium resources have emerged as a vital component for achieving sustainability and clean power. To fulfill the escalating demand for clean energy, continual advancements in uranium mining technologies are imperative. Currently, established uranium mining methods encompass open-pit mining, underground mining, and in situ leaching (ISL). Notably, in situ leaching stands out due to its environmental friendliness, efficient extraction, and cost-effectiveness. Moreover, it unlocks the potential of extracting uranium from previously challenging low-grade sandstone-hosted deposits, presenting novel opportunities for uranium mining. This comprehensive review systematically classifies and analyzes various in situ leaching techniques, exploring their core principles, suitability, technological advancements, and practical implementations. Building on this foundation, it identifies the challenges faced by in situ leaching and proposes future improvement strategies. This study offers valuable insights into the sustainable advancement of in situ leaching technologies in uranium mining, propelling scientific research and practical applications in the field.

Lithium-ion batteries, a primary power source, generate electronic hazardous waste at the end of their lifespan, which is a richer source of highly concentrated metals such as cobalt and lithium than those in natural resources. The waste is a potential renewable resource for the extraction of metals. Bioleaching, a process utilizing microbial activity, was used in this study to investigate the cobalt and lithium leaching efficiency from battery wastes. Two fungal strains, Aspergillus sp. strain JMET 15 and Penicillium sp. strain JMET 24 were used with different organic carbon sources (sucrose medium and potato dextrose broth) at 1 % pulp density. The sucrose medium derived a higher acid quantity and leached higher concentration of cobalt and lithium than in potato dextrose broth. Leaching efficiency by JMET 24 was higher than JMET 15. Cobalt (32.57 % and 27.19 %) and lithium (65.07 % and 40.58 %) were bioleached by JMET 24 and JMET 15, respectively, after 30 d cultivation in the sucrose medium. Lower pulp density was conducted to achieved higher leaching efficiency by JMET24, cobalt (77.87 % and 74.5 %) and lithium (99.88 % and 78.4 %) were bioleached at 0.1 % and 0.5 % pulp density, respectively. Cobalt oxide (Co3O4) was the product of the one-step recovery (leaching and precipitation) process. Cobalt was transformed from lithium cobalt oxide to cobalt phosphate-oxalate by JMET 24 in the sucrose medium. Thus, the potential of bioleaching as an effective method for recovering valuable metals from lithium-ion battery waste is demonstrated, presenting a promising approach for both waste management and resource recovery.

The general trend in biomining (i.e., bioleaching and biooxidation) is the use of media with high concentrations of the nutrients (nitrogen as ammonium, phosphorous as phosphate, and K), which are considered to be essential for microbial growth. The depletion of any of the nutrients would affect negatively the bioleaching (and biooxidation) capacity of the microorganisms, so the formulation of the different media ensures that there is a surplus of nutrients. However, some of these nutrients (e.g., phosphate, K) may be already present in the ore and are made available to the microorganisms when the ore is exposed to the low-pH media used during bioleaching. The effect of phosphate addition (109 mg/L) and depletion on the bioleaching of low-grade sulfidic ore alongside the determination of ammonium (i.e., 25 mg/L, 50 mg/L, 109 mg/L, 409 mg/L, and 874 g/L) requirements were studied. The results of the experiments presented showed that the addition of phosphate did not have any effect on the bioleaching of the low-grade sulfidic ore while the addition of ammonium was necessary to obtain higher redox potentials (>650 mV vs. Ag/AgCl) and higher metal (Co, Cu, Ni, and Zn) dissolutions. Temperature was the factor that shaped the microbial communities, at 30°C, the microbial community at the end of all the experiments was dominated by Acidithiobacillus sp. as well as at 42°C, except when nutrients were not added and Sulfobacillus sp. was the dominant microorganism. At 55°C, DNA recovery was unsuccessful, and at 60°C, the microbial communities were dominated by Sulfolobus sp. In conclusion, the amount of nutrients in bioleaching could be reduced significantly to achieve the redox potentials and metal dissolution desired in bioleaching without affecting the microbial communities and bioleaching efficiencies. [ABSTRACT FROM AUTHOR]

Waste printed circuit boards (WPCBs) can be bioleached for Cu recovery, but lack of substrate for the bioleaching culture. In this study, using pyrite as a bacterial substrate for bioleaching WPCBs and recovering Cu was explored. The results showed that the WPCBs bioleaching using pyrite as the bacterial substrate was feasible. Mechanical crushing was a suitable WPCBs pretreatment method. The optimal WPCBs and pyrite pulp densities were respectively found to be 1.25% (w/v) and 1.0% (w/v), and the suitable nitrogen source ratio ((NH4)2SO4: (NH4)2HPO4) was deemed as 2 g/L: 2 g/L, achieving a Cu2+ leaching efficiency of 95.60 ± 1.57% in 14 d. Copper in the bioleaching solution can be directly recovery via electrodeposition. The Cu recovery efficiency in 60 min was up to 92.19 ± 1.35% under the optimal condition that the initial Cu2+ concentration and pH were respectively set at 7.34 g/L and 2.75, and the current density was set at 200 A/m2. Copper was found as the dominant metal in the cathode deposits, existing in the form of Cu and Cu2O. This work provided a novel approach for bioleaching WPCBs and recovering Cu. [ABSTRACT FROM AUTHOR]

BACKGROUND: A bioleaching process could offer the advantage of higher metal recovery in a sustainable manner even from lithium‐ion battery (LIB) samples with very low metal concentrations. In recent years, there has been a significant increase in the use of secondary resources such as LIBs for various purposes including transportation, large‐scale energy storage and use in portable devices. RESULTS: The adaptation of a mixed culture of acidophilic microorganism (lab stock culture) to a representative LIB sample allowed the setting of 0.5% of the pulp density under lab scale conditions. The maximum metal dissolution by bioleaching in a 1‐L bioreactor for the as‐received and thermally treated samples was found to be Li (67% & 49%), cobalt (81% & 86%), nickel (99% & 87%) and manganese (86% & 75%). Likewise, on the 10‐L scale, the dissolutions observed were: Li (80% & 67%), Co (75%), Ni (91% & 88%) and Mn (63% & 75%) for the as‐received and heat‐treated samples, respectively. CONCLUSION: Parameters such as particle size, leaching time, pH and iron ions (Fe2+) affect the efficiency of acidophilic bioleaching of Li, Co, Ni and Mn from spent LiBs. © 2024 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

[Display omitted] • The mixed culture was designed by mimicking natural habitats and bacterial stress. • The bacterial-fungal mixed culture produced 7460 mg/l oxalic acid successfully. • Bioleaching of spent printed circuit boards by mixed culture was better than pure. • The process concluded with a valuable residue that can be utilized in the future. This study explores the extraction of metals from spent mobile phone printed circuit boards (SMPhPCBs) to address environmental and resource depletion concerns. The challenges in metal recovery from SMPhPCBs arise due to their complex composition and high metal content. While previous research has primarily focused on using bio-cyanide, bio-sulfate, and bio-ferric compounds from acidophilic bacteria, the potential of bio-oxalic acid for SMPhPCBs treatment and the alteration of their complex structure has not yet been explored. Additionally, this study suggests evaluating the untapped potential of Aspergillus niger in oxalic acid production through mixed cultures with bacteria, marking a pioneering approach. A unique culture of Bacillus megaterium and A. niger was created, inducing bio-stress by bacterial metabolites, including gluconic acid (2683 mg/l) and live/dead bacterial cells in a medium with glucose deficiency. Results demonstrated reducing sugar consumption and oxalic acid over-production in mixed cultures compared to pure cultures, ranging from 1350 to 4951 mg/l at an initial glucose concentration (IGC) of 10 g/l and 4276 to 7460 mg/l at IGC 20 g/l. This over-production is attributed to proposed fungal signaling mechanisms to bacteria. Metal extraction using organic acids and siderophores at 10 g/l pulp density, 24 h, and 60 °C yielded Mn (100 %), Pt (100 %), Pd (70.7 %), Fe (50.8 %), Co (48.3 %), Al (21.8 %), among others. The final valuable residue containing copper, gold, and silver holds potential for future recycling. The study concludes with XRD and FTIR analyses to assess the bioleaching effect on the bio-leached powder. [ABSTRACT FROM AUTHOR]

The extraction of nickel, cobalt, and other metals from laterite ores via bioleaching with sulfur-oxidizing and ferric iron-reducing, autotrophic, acidophilic bacteria (e.g. Acidithiobacillus species) has been demonstrated under anaerobic as well as aerobic conditions in experiments in different laboratories. This study demonstrated the bioleaching of laterites from Brazil with the addition of elemental sulfur in 2-L stirred-tank bioreactors with pure and mixed cultures of Acidithiobacillus and Sulfobacillus species under aerobic conditions. In particular, a potential disturbance of mineral dissolution under aerobic conditions by ferrous iron-oxidizing acidophiles likely introduced as contaminants in an applied bioleaching process was investigated with Leptospirillum ferrooxidans at 30°C and Leptospirillum ferriphilum at 40°C, at maintained pH 1.5 or without maintained pH leading to an increase in acidity (with pH values <1.0) due to the biological production of sulfuric acid. Despite the proportion of ferrous iron to the total amount of extracted iron in the solution being drastically reduced in the presence of Leptospirillum species, there was a negligible effect on the extraction efficiency of nickel and cobalt, which is positive news for laterite bioleaching under aerobic conditions. [ABSTRACT FROM AUTHOR]

Bioleaching of Cu from the copper concentrate of Armanis gold-bearing polymetallic ore (Armenia) was investigated. The main objective was revealing high active bacteria and their association, as well as optimizing the bioleaching process with their application to ensure the most efficient recovery of copper from the tested concentrate. To obtain optimal bacterial associations, bottom-up and top-down approaches were used. Bioleaching of copper concentrate was carried out using pure cultures of iron- and sulfur-oxidizing bacteria and their mixed culture, as well as indigenous bacterial consortium. Comparative studies of copper bioleaching by mixed cultures of Acidithiobacillus caldus, Leptospirillum ferriphilum CC, Sulfobacillus thermosulfidooxidans 6, and indigenous consortium Arm of iron-oxidizing bacteria were performed. At the beginning of bioleaching, the amounts of extracted copper by mixed culture and Arm consortium were equal; afterward, between 20–27 days, the Arm indigenous consortium showed significantly higher activity in terms of copper extraction. In parallel, mineralogical and liberation analyses of feed material and bioleaching residues were performed. [ABSTRACT FROM AUTHOR]

Background and Aims: Bioremediation of soils contaminated with metal(loid)s is an attractive research area due to its sustainability and economic benefits. In the Slovak Republic, there are several abandoned mines containing high concentrations of arsenic (As) and antimony (Sb). This calls for new options for removing these hazardous metalloids from contaminated substrates. Studies on bioleaching of soils co-contaminated with both metalloids are very rare. This study aimed to test the effectiveness of bioleaching of soils heavily co-contaminated with As and Sb (up to 1463 mg.kg–1 and 5825 mg.kg–1, respectively) at a former stibnite mining site (Poproč, eastern Slovakia) through biostimulation and bioaugmentation. Methods: Bioleaching of As and Sb from four soils was induced by biostimulation of autochthonous microflora with Sabouraud medium (SAB) and SAB+glucose, and bioaugmentation of the soil with bacterial strains Cupriavidus oxalaticus and Cupriavidus metallidurans. Soil samples were subjected to determination of physico-chemical properties, microbiological parameters, and additional mineralogical analysis. Results: An inverse relationship between the total metalloid concentration and the microbial diversity was confirmed. In experiments with Cupriavidus metallidurans and Cupriavidus oxalaticus, mean bioleached As fractions were 37.6% and 41.3%, while Sb bioleaching was significantly lower, ranging between 17.0–26.2%. The mean bioleached fraction of As and Sb using SAB was 40.7% and 14.4%, respectively. The addition of glucose to SAB increased As bioleaching (50.7%) but not that of Sb. Conclusion: Collectively, the results highlighted a role of microorganisms in the mobility of metalloids in soils with their prospective applications in remediation of contaminated sites. [ABSTRACT FROM AUTHOR]

The winning of critical raw materials from secondary resources, e.g., from abandoned mines, mining residues, electronic waste or low-grade ores, is a potential source with promising outcomes due to innovative and more efficient extraction methods. The research and education mine "Reiche Zeche" at the TU Bergakademie Freiberg, Germany offers a scientific lab in a real application environment for an in-situ bioleaching section from a low-grade sulfide ore vein with on-site associated membrane downstream processing. The evaluation and resumption of previous research activities showed both the feasibility and the potential for further up-scaling. But there was also potential evaluated for improving the effectiveness, especially in terms of individual process elements within the leaching and membrane cycle as well as regarding microbiology. Based on this, further optimization was carried out and effectiveness was evaluated and compared to the prior state. The results regarding the leaching outcome proved that process optimization leads to stable and continuous leaching process operations as well as to improved and more favorable conditions for the microorganisms due to the implementation of a bioreactor and changing the whole leaching operation from a direct into an indirect process. Furthermore, cleaning in place (CIP) resulted in the maintenance of selectivity despite discontinuous membrane process operation. [ABSTRACT FROM AUTHOR]

This research focused on applying and comparing the performance of microorganisms with different temperature preferences, assessing the overall percentage recovery of elements (copper, zinc, arsenic, and iron) from mine tailings in the Staré Ransko region (Czech Republic). The study examined the solubilisation process using a mesophilic mixed bacterial culture, including Acidithiobacillus ferrooxidans (AF), Acidithiobacillus thiooxidans (AT), Leptospirillum ferrooxidans (LF), and the thermophilic species Sulfobacillus thermosulfidooxidans (ST). Under biotic conditions, constant process parameters were maintained, including a particle size of 71–100 µm, a pH value of 1.8, agitation at 150 rpm, and a pulp density of 10% (w/v). The only exception was the temperature, which varied for optimal multiplication of cultures (30 °C/50 °C). Additionally, the research examined the impact of AgNO3 additive at a concentration of Ag+ ions of 5 mg·L−1. The research focused on the solubilisation of Cu, Zn, Fe, and As and the results demonstrated that the application of microorganisms ST, combined with the action of Ag+ ions, enhanced the kinetics of the extraction process, leading to the highest final recovery of all elements (Cu 91.93%, Zn 85.67%, As 69.16%, and Fe 71.72%) under the specified conditions. The study observed that the most significant increase in solubilisation can be attributed to the additive cation in the case of copper (AF, AT, LF/Ag+ by 40.33%; ST/Ag+ by 44.39%) and arsenic (AF, AT, LF/Ag+ by 23.79%; ST/Ag+ by 26.08%). Notably, the intensification of leaching using thermophilic bacteria at a constant suspension temperature of 50 °C was primarily determined for Zn (ST by 18.36%, ST/Ag+ by 14.24%). After 24 days of extraction, the emergence of secondary minerals, namely CaSO4·2H2O and KFe3(SO4)2(OH)6, was identified. The study highlighted a significant increase in the extraction mechanism kinetics due to the influence of microorganisms, contrasting with the low solubilities observed under abiotic conditions (Cu 9.00%, Zn 14.17%, As 4.28%, Fe 6.23%). [ABSTRACT FROM AUTHOR]

This study examined the metal tolerance and organic acid-producing capabilities of fungal isolates from South African tailings to assess their potential for future bioleaching applications. Four isolates were chosen for additional examination based on their capacity to generate organic acids and tolerance to metals. In terms of tolerance to Al, Zn, Ni, and Cr, these four isolates—Trichoderma, Talaromyces, Penicillium_3, and Penicillium_6—displayed varying degrees of resistance, with Trichoderma displaying a better metal tolerance index. The growth rates under metal stress varied among the isolates, with Trichoderma displaying the highest growth rates. In high-performance liquid chromatography results, citric acid emerged as the primary organic acid produced by the four isolates, with Trichoderma achieving the highest yield in the shortest timeframe. Gas chromatography–mass spectrometry results showed that the citric acid cycle is one of the main pathways for organic acid production, though other pathways related to lipid biosynthesis and carbohydrate metabolism also play significant roles. Three compounds involved in furfural breakdown were abundant. Using KEGG, a link between these compounds and the citric acid cycle was established, where their breakdown generates an intermediate of the citric acid cycle. [ABSTRACT FROM AUTHOR]

Bioleaching has gained significant attention as a cost-effective and environmentally friendly approach for extracting metals from low-grade ores and industrial byproducts. The application of acidophiles in bioleaching has been extensively studied. Among the various mechanisms leaching microorganisms utilize, quorum sensing (QS) is pivotal in regulating their life activities in response to population density. QS has been confirmed to regulate bioleaching, including cell morphology, community structure, biofilm formation, and cell metabolism. Potential applications of QS have also been proposed, such as increasing mineral leaching rates by adding signaling molecules. This review is helpful for comprehensively understanding the role of QS in bioleaching and promoting the practical application of QS-based strategies in bioleaching process optimization. [ABSTRACT FROM AUTHOR]

Uranium, a cornerstone for nuclear energy, facilitates a clean and efficient energy conversion. In the era of global clean energy initiatives, uranium resources have emerged as a vital component for achieving sustainability and clean power. To fulfill the escalating demand for clean energy, continual advancements in uranium mining technologies are imperative. Currently, established uranium mining methods encompass open-pit mining, underground mining, and in situ leaching (ISL). Notably, in situ leaching stands out due to its environmental friendliness, efficient extraction, and cost-effectiveness. Moreover, it unlocks the potential of extracting uranium from previously challenging low-grade sandstone-hosted deposits, presenting novel opportunities for uranium mining. This comprehensive review systematically classifies and analyzes various in situ leaching techniques, exploring their core principles, suitability, technological advancements, and practical implementations. Building on this foundation, it identifies the challenges faced by in situ leaching and proposes future improvement strategies. This study offers valuable insights into the sustainable advancement of in situ leaching technologies in uranium mining, propelling scientific research and practical applications in the field. [ABSTRACT FROM AUTHOR]