Search

Briquettes as a product of biomass compaction is considered a renewable product for replacing fossil fuels. Briquettes can be produced from several sources using the development of technology. In this study, the effect of walnut shells as an organic binder on the properties of biofuel briquettes made of industrial and garden wastes was investigated. Cylindrical briquettes from walnut shell flour with weight ratios of 5%, 10%, 15%, 20%, and 25% were prepared from industrial sawdust and ground garden residue with a weight ratio of 50/50. Briquettes were compacted under a temperature of 170 °C and pressure of 150 kg/cm2 for 30 s. Results indicated that the chemical analyses of compounds, compaction ratio, and density of the briquettes containing different proportions of walnut shells were not significantly different. The lowest fixed carbon was measured for briquettes containing 5% of walnut shell, and increasing the ratio of walnut shell significantly increased the compressive strength of the resulting briquette.

Briquettes as a product of biomass compaction is considered a renewable product for replacing fossil fuels. Briquettes can be produced from several sources using the development of technology. In this study, the effect of walnut shells as an organic binder on the properties of biofuel briquettes made of industrial and garden wastes was investigated. Cylindrical briquettes from walnut shell flour with weight ratios of 5%, 10%, 15%, 20%, and 25% were prepared from industrial sawdust and ground garden residue with a weight ratio of 50/50. Briquettes were compacted under a temperature of 170 °C and pressure of 150 kg/cm2 for 30 s. Results indicated that the chemical analyses of compounds, compaction ratio, and density of the briquettes containing different proportions of walnut shells were not significantly different. The lowest fixed carbon was measured for briquettes containing 5% of walnut shell, and increasing the ratio of walnut shell significantly increased the compressive strength of the resulting briquette. [ABSTRACT FROM AUTHOR]

The issue of domestic energy is still a major concern in developing countries. A sound knowledge of fuel characteristics is a major asset for their acceptability and their distribution. Samples of briquettes made partially with Municipal Solid Waste (MSW) were collected in several companies with unknown characterization. This study intended first to characterize them for physical and chemical properties. Subsequently, energy content of the briquettes and the energy price are presented and compared to those of charcoal and peat, which is typically used by the local population as fuel. To classify the different briquettes according to their quality in terms of rate as well as their level in fire resistance, cooking tests and heating curves have been made. The calorific value of the studied briquettes varied from 12.3 to 18.6 MJ/kg compared to 32.5 MJ/kg for charcoal and 14.7 MJ/kg for peat. Consequently, their value as viable substitutes for charcoal or peat is apparent. However, some samples burn very quickly and do not provide prolonged heating while other samples have a slow rate of combustion and release little energy. Finally, the briquettes using MSW have a low price between $0.16 and $0.19/kg compared to the price of $0.53/kg for charcoal and $0.20/kg for peat. The promotion of these briquettes as a valuable substitution fuel is proved and contribute to sustainable development by reusing MSW and avoiding deforestation.

In accordance with the technical standard ČSN EN 13229 "Inset appliances for heating including open fires fired by solid fuels - Requirements and test methods" was performed the basic assessment of thermal efficiency and emission parameters of prototype of combustion accumulation stove SK-2 with upper after-burning and nominal heat output of 8 kW. Verified gradually were the bio-briquettes of diameter 65 mm from mixture of wheat straw and 20% m/m of brown coal, wheat straw and 5% m/m of brown coal, wheat straw, mixture of wheat straw and 10% m/m of water and molasses solution, Ecobiopal created with the fermented blend of 33% m/m of digested clean water plant sludge and 67% m/m of wood chopped material, blend of wheat straw and 15% m/m of sugar beet pulp, mixture of timothy hay and 25% m/m of brown coal, timothy grass hay, meadow hay, mixture of meadow hay and 25% m/m of brown coal. The lowest CO emissions, when the limit value of 3000 mg/m3N at 13% of O2 has not been exceeded, determined for more strict 1st class and the highest efficiency at nominal heat performance, i.e. higher or equal to 70% (Class I) have been reached by the briquettes produced from mixture of wheat straw and 15% m/m of sugar beet pulp, timothy hay and mixture of meadow hay with addition of 25% m/m of brown coal. Further were measured NOx and HCl emissions. NOx values were significantly lower than limit values determined for similar combustion of solid biofuel. Higher differences of HCl emissions correlate with various Cl content in fuels. Only the wheat straw briquettes with share of 25% m/m of brown coal have exceeded the limit value by 16%. Other fuels have shown considerably lower values. The results have proved better heat-technical and emission parameters of blended briquettes and are significant also for solid biofuels and solid recovered fuels standardization as well as for increasing efficiency method detection and ecological parameters optimization including HCl emissions.