Search

Birds use song for several goals as defending territory, alerting a partner to the presence of a predator, or wooing a female for breeding. This study aims to identify the morphometric parameters which determine the variability of the number of syllables in the “sexy” songs of yellow-fronted canary. For this purpose, sixteen morphometric parameters were measured among 170 yellow-fronted canaries captured, in four agroecological zones in North Benin. The results showed that the morphometry of yellow-fronted canary varies according to its habitat and the type of song. The categorization of the sample studied allowed to retain two groups which differ in the importance of body characters and the number of sexy syllables issued when singing. Yellow-fronted canaries from the Sudanese climate zone not only have superior morphometric characters compared to other zones, but also have a song composed of several different sexy syllables. A binary logistic regression model with selection of variables revealed that the index of beak shape, abdomen length, and tail length are the determining characteristics of the number of sexy syllables. These results are needed for future breeding and conservation studies of the species.

A key strategy to improve fruit quality and consumer appeal in mangoes is to breed trait improvements into new cultivars. There are several key fruit quality traits in mango. Knowledge of the heritability and relationship among these traits is important for breeding success. This paper implements a linear mixed model analysis including paternal information for analysis of 13 important fruit quality traits from mango cultivars planted across three environments and assessed over several seasons. The traits analysed were average fruit weight, skin background colour, blush colour, percentage blush, blush intensity, skin thickness, beak shape, stem-end shape, deformities, mesocarp colour, mesocarp texture, seed width and mesocarp recovery. The analysis allows investigation into trait heritabilities and stability of traits over years and sites, as well as genetic correlations among traits.

The avian beak is a multipurpose organ playing a vital role in a variety of functions, including feeding, drinking, playing, grasping objects, mating, nesting, preening and defence against predators and parasites. With regards to poultry production, the beak is the first point of contact between the bird and feed. The beak is also manipulated to prevent unwanted behaviour such as feather pecking, toe pecking and cannibalism in poultry as well as head/neck injuries to breeder hens during mating. Thus, investigating the beak morphometry of poultry in relation to feeding and other behaviours may lead to novel insights for poultry breeding, management and feeding strategies. Beak morphometry data may be captured by advanced imaging techniques coupled with the use of geometric morphometric techniques. This emerging technology may be utilized to study the effects of beak shape on many critical management issues including heat stress, parasite management, pecking and feeding behaviour. In addition, existing literature identifies several genes related to beak development in chickens and other avian species. Use of morphometric assessments to develop phenotypic data on beak shape and detailed studies on beak-related behaviours in chickens may help in improving management and welfare of commercial poultry.

A recent geometric morphometric study on certain landbird lineages revealed that a major part of the variation in beak shape is accounted for by skull size and cranial shape. The study interpreted this result as evidence for the presence of strong evolutionary constraints that severely prevented beak shape from evolving substantially away from predictions of allometry and morphological integration. However, there is another overlooked but similarly plausible explanation for this result: The reason why beak shape does not depart much from predictions might simply be that selection pressures favoring such changes in shape are themselves rare. Here, to evaluate the intensity of evolutionary constraints on avian beak shape more appropriately, we selected large-billed (Corvus macrorhynchos) and carrion crows (Corvus corone) as study objects. These landbird species seem to experience selection pressures favoring a departure from an allometric trajectory. A landmark-based geometric morphometric approach using three-dimensional reconstructions of CT scan images revealed that only 45.4% of the total shape variation was explained by allometry and beak-braincase integration. This suggests that when a selection pressure acts in a different direction to allometry and integration, avian beak shape can react to it and evolve flexibly. As traditionally considered, evolutionary constraints on avian beak shape might not be all that strong.

Beak treatment is an effective method of reducing the damage inflicted by severe feather pecking (SFP) but there is significant pressure to eliminate these treatments and rely solely on alternative strategies. Substantial variation in beak shape exists within non-beak treated layer flocks and beak shape appears to be heritable. There is the potential to use this pre-existing variation and genetically select for hens whose beak shapes are less apt to cause damage during SFP. To do this, we must first understand the range of phenotypes that exist for both the external beak shape and the bones that provide its structure. The objective of this study was to determine the variation in premaxillary (within the top beak) and dentary (within the bottom beak) bone morphology that exists in 2 non-beak treated pure White Leghorn layer lines using geometric morphometrics to analyze radiographs. Lateral head radiographs were taken of 825 hens and the premaxillary and dentary bones were landmarked. Landmark coordinates were standardized by Procrustes superimposition and the covariation was analyzed by principal components analysis and multivariate regression using Geomorph (an R package). Three principal components (PCs) explained 85% of total premaxillary bone shape variation and showed that the shape ranged from long and narrow with pointed bone tips to short and wide with more curved tips. Two PCs explained 81% of total dentary bone shape variation. PC1 described the dentary bone length and width and PC2 explained the angle between the bone tip and its articular process. For both bones, shape was significantly associated with bone size and differed significantly between the two lines. Bone size accounted for 42% of the total shape variation for both bones. Together, the results showed a range of phenotypic variation in premaxillary and dentary bone shape, which in turn may influence beak shape. These bone phenotypes will guide further quantitative genetic and behavioral analyses that will help identify which beaks shapes cause the least damage when birds engage in SFP.

Birds' beaks play a key role in foraging, and most research on their size and shape has focused on this function. Recent findings suggest that beaks may also be important for thermoregulation, and this may drive morphological evolution as predicted by Allen's rule. However, the role of thermoregulation in the evolution of beak size across species remains largely unexplored. In particular, it remains unclear whether the need for retaining heat in the winter or dissipating heat in the summer plays the greater role in selection for beak size. Comparative studies are needed to evaluate the relative importance of these functions in beak size evolution. We addressed this question in a clade of birds exhibiting wide variation in their climatic niche: the Australasian honeyeaters and allies (Meliphagoidea). Across 158 species, we compared species' climatic conditions extracted from their ranges to beak size measurements in a combined spatial-phylogenetic framework. We found that winter minimum temperature was positively correlated with beak size, while summer maximum temperature was not. This suggests that while diet and foraging behavior may drive evolutionary changes in beak shape, changes in beak size can also be explained by the beak's role in thermoregulation, and winter heat retention in particular.

Summary The diversity of beak shapes among birds is often assumed to be largely the result of adaptations to different feeding behaviors and diets. However, this assumption has only been tested for a small subset of avian diversity, primarily within the order Passeriformes. Moreover, given the role of the beak in behaviors other than feeding and given that most previously identified beak-feeding associations concern beak size rather than shape, it remains unclear how much of beak shape diversity is explained by feeding ecology and what functional explanations account for these differences in shape. I quantified the association between beak shape and feeding ecology for 42 species in the bird order Anseriformes (waterfowl) using 3D curvature of the upper beak collected from museum specimens and continuous dietary data compiled from the literature. I also tested whether leverage or stress resistance of the beak explains the association between beak shape and feeding ecology. Diet is strongly and significantly correlated with beak shape in waterfowl. An ancestral beak shape reconstruction and the reconstructed diet of the anseriform fossil Presbyornis both support filter-feeding as ancestral for most waterfowl, followed by multiple, significantly convergent transitions from a duck-like beak toward a more goose-like beak. The evolution of a more goose-like beak is associated with increased consumption of leaves, decreased consumption of invertebrates, and an increase in mechanical advantage of the beak. Moreover, no association was identified between size (measured as either beak size or body mass) and feeding ecology nor between size and beak shape. These results demonstrate that feeding ecology has acted as the primary selective force in the diversification of waterfowl beak shapes, including the convergent originations of geese. Thus, rapid and convergent adaptation of the beak to feeding is not limited to passerines nor is it limited to size-correlated shape changes. The positive evolutionary correlation between mechanical advantage and herbivory shows that lever mechanics can explain the functional evolution of the kinetic upper beak in birds. These results also suggest that functions of the beak other than feeding may play a minor role in explaining overall beak shape diversity. A lay summary is available for this article.

Despite previous research on the impacts of beak treatment on laying hens, little information exists regarding how variation in beak morphology that can occur following beak treatment affects production, behavior, and welfare. Following infrared beak treatment (IRBT), variations in beak shape, such as a shovel beak (bottom beak longer than top), cracks (Cr), or bubbles (B) may occur if the IRBT equipment is damaged or if a quality control program is not followed at the hatchery. This study aimed to determine if variations in beak morphology post-IRBT impacted laying hen production or welfare. Infrared beak-treated Lohmann LSL-Lite hens (n = 80) were selected from a 56-wk-old flock and randomly assigned into 1 of 8 treatments: flush beak (control), shovel beak extending 0–1 mm (SB0-1), 1–2 mm (SB1-2), 2–3 mm (SB2-3), 3–4 mm (SB3-4), or >4 mm (SB > 4), Cr, or B. Hens were housed in individual cages for 4 wk and production (body weight, feed intake, egg production, and egg quality), and welfare (behavior and histology) parameters were evaluated. Consumption of different particle sizes was assessed by measuring feed particle size of refused feed. Data were analyzed as a one-way ANOVA, in a completely randomized design using PROC GLM (SAS 9.4). The results indicated that the beak morphologies examined had minimal effects on the production or welfare of the hens. Histological assessment did not show the presence of neuromas in the beak tissue, suggesting that the hens were not experiencing chronic pain from the IRBT procedure.

Background The Psittaciformes (parrots and cockatoos) are characterised by their large beaks, and are renowned for their ability to produce high bite forces. These birds also possess a suite of modifications to their cranial architecture interpreted to be adaptations for feeding on mechanically resistant foods, yet the relationship between cranial morphology and diet has never been explicitly tested. Here, we provide a three-dimensional geometric morphometric analysis of the developmental and biomechanical factors that may be influencing the evolution of psittaciformes’ distinctive cranial morphologies. Results Contrary to our own predictions, we find that dietary preferences for more- or less- mechanically resistant foods have very little influence on beak and skull shape, and that diet predicts only 2.4% of the shape variation in psittaciform beaks and skulls. Conversely, evolutionary allometry and integration together predict almost half the observed shape variation, with phylogeny remaining an important factor in shape identity throughout our analyses, particularly in separating cockatoos (Cacatuoidea) from the true parrots (Psittacoidea). Conclusions Our results are similar to recent findings about the evolutionary trajectories of skull and beak shape in other avian families. We therefore propose that allometry and integration are important factors causing canalization of the avian head, and while diet clearly has an influence on beak shape between families, this may not be as important at driving evolvability within families as is commonly assumed. Electronic supplementary material The online version of this article (10.1186/s12862-019-1432-1) contains supplementary material, which is available to authorized users.

This research examined how infrared beak treatment (IRBT), sloughing of the treated beak tissue, and the variations in beak shape that can occur post-IRBT impact the welfare and mortality of Lohmann LSL-Lite (LW) and Lohmann Brown (LB) pullets and hens. Two experiments were conducted and birds for both experiments were treated on the day of hatch. IRBT equipment settings were adjusted to create 4 specific beak shapes: shovel (SHV), step (STP), standard (STAN), and an untreated sham control (C). Experiment 1 pullets (n = 80 per strain) were reared in bioassay cages from 1 to 29 D of age (4 replicates per treatment). Data collected included time and presence of beak sloughing, pecking force, behavioral expression, and mortality. Experiment 2 pullets (n = 320 per strain) were reared in floor pens from 1 D to 18 wk of age (2 replicates per treatment) and then conventional cages from 18 to 60 wk of age (6 replicates per treatment). Data collected for Experiment 2 included behavioral expression, feather cover, comb damage, and mortality. Data were analyzed using PROC MIXED (SAS® 9.4) with Tukey's test to separate means. Differences were significant when P ≤ 0.05. IRBT and sloughing had no effect on pecking force or mortality throughout rearing. The variations in post-IRBT beak shape had minor effects on behavior. During rearing, STAN pullets were more active than C pullets but STP and STAN pullets performed less exploratory pecking. During the laying period, SHV and STP hens preened more than C hens. The IRBT treatments, regardless of beak shape, reduced feather loss, comb damage, and cannibalism-related mortality during the laying period. Overall, the results indicate that LW and LB pullets and hens can cope with the change in beak shape that occurs with IRBT, and that welfare is not negatively impacted if some variation in beak shape occurs.

Embryos from aquatic birds are the primary models for the study of flipper development. While some staging of early embryogenesis in duck have been studied, characterization of the stages of the entire embryonic development period in water birds has not been described. This study aimed to establish a comparison of complete morphological development staging for ducks (Anas platyrhynchos) and geese (Anser cygnoides) with the embryonic staging system by Hamburger and Hamilton (HH) for the chicken (Gallus gallus). Our results show that morphological development in the chicken, duck, and goose are similar in the early stages. The major differences occurred after stage 27 of embryonic development, where the beak shape in ducks and geese was wider and longer than in chickens. In addition, the second and third interdigital webs of the hind limb of the chicken were found to be degraded from stage 31, and eventually vanished at stage 35; however, they were retained in ducks and geese. Rapid physical development occurred in the mid-to-late stages in ducks and geese. To our best knowledge, this is the first description of complete embryonic development for the duck and goose. Establishment of an embryonic staging system for duck and goose provides new models for the study of waterfowl development.

Extensive research on avian adaptive radiations has led to a presumption that beak morphology predicts feeding ecology in birds. However, this ecomorphological relationship has only been quantified in a handful of avian lineages, where associations are of variable strength, and never at a broad macroevolutionary scale. Here, we used shape analysis and phylogenetic comparative methods to quantify the relationships among beak shape, mechanical advantage, and two measures of feeding ecology (feeding behavior and semiquantitative dietary preferences) in a broad sample of modern birds, comprising most living orders. We found a complex relationship, with most variables showing a significant relationship with feeding ecology but little explanatory power. For example, diet accounts for less than 12% of beak shape variation. Similar beak shapes are associated with disparate dietary regimes, even when accounting for diet-feeding behavior relationships and phylogeny. Very few lineages optimize for stronger bite forces, with most birds exhibiting relatively fast, weak bites, even in large predatory taxa. The extreme morphological and behavioral flexibility of the beak in birds suggests that, far from being an exemplary feeding adaptation, avian beak diversification may have been largely contingent on trade-offs and constraints.

This thesis is an investigation of the relationships between the performance of injurious pecking and other behavioural and physical traits in domestic turkeys. Injurious pecking is a serious concern for the welfare and productivity of domestic turkeys, as a large proportion of the mortalities and culls in commercial flocks show injurious pecking damage. There are three distinct types of injurious pecking in turkeys: head pecking, severe feather pecking, and cannibalism; however, the development and causation of this damaging behaviour in turkeys is still poorly understood. The first research study in this thesis investigated the development of injurious pecking damage in relation to physical characteristics, such as body weight, leg health, and the snood length of growing male turkeys. This study showed that male turkeys develop more injurious pecking damage and poorer leg health over time. Yet, head pecking damage showed no correlation with body weight and snood length in domestic male turkeys. The validation study of data accelerometers for detecting turkey steps determined that this technology is best suited to evaluate the relationship between activity levels and injurious pecking in turkeys under small-scale research settings. The next study used temporal pattern analysis and a conventional behavioural assessment to identify differences in the behavioural organization of head pecking, severe feather pecking, and non-damaging gentle feather pecking. Both analyses identified similar differences in the structure of active behaviours and gentle feather pecking among pecking types, yet gave conflicting results on the organization of feeding and foraging behaviour for turkeys engaged in head, severe, or gentle feather pecking. The final study was an initial step for determining if morphological differences in beak shape influence the injurious pecking behaviour of individual turkeys. This research used landmark-based geometric morphometrics to establish that beak shape shows a wide phenotypic variation between male and female domestic turkeys at both 6 and 18.5 weeks of age. This morphological study provides a foundation for future genetics and behavioural research to evaluate the heritability of beak shape in domestic turkeys and to identify differences in potential capacity for injurious pecking damage between the distinct beak shape phenotypes. Hybrid Turkeys, Ontario Ministry of Agriculture and Food, Canadian Poultry Research Council, The Campbell Centre for the Study of Animal Welfare, Poultry Industry Council

Commercial laying hens are prone to injurious pecking (IP), a common multifactorial problem. A 2 × 2 × 2 factorial design assessed the effects of breed (Lohmann Brown Classic (L) or Hyline Brown (H)), beak treatment (infra-red treated (T) or not (NT)), and environment (extra enrichment (EE) or no extra enrichment (NE)) on mortality, behaviour, feather cover, and beak shape. Hens were allocated to treatments at 16 weeks of age and data were collected every four weeks from age 19 to 71 weeks. Data were analysed in Genstat using mixed models. L hens had higher all and IP-related mortality than H hens (p < 0.003), whilst NT hens had higher mortality than T hens but only due to culling of whole cages (p < 0.001). Feather cover for L hens deteriorated more quickly with age at most body sites than H hens (age × breed × body site p < 0.001). For NT hens, feather cover was worse at most body sites (beak treatment × body site p < 0.001), and worsened more quickly with age (age × beak treatment p = 0.014) than T hens. L and NE hens performed more bird-to-bird pecking than H and EE hens, respectively (breed p = 0.015, enrichment p = 0.032). More damage to mats and ropes was caused by L and NT hens than by H and T hens, respectively (age × breed p < 0.005, beak treatment p < 0.001). Though H hens had fewer mortalities and better feather cover, breed effects may have been influenced by farm management practices, as they may have been better suited to H than L hens. Though EE hens performed less bird-to-bird pecking, the enrichments were less effective at reducing feather cover damage and mortality than expected.

In this paper we analysed size and shape differences of body (mantle and fins) and inferior beak of the squid Illex argentinus from two Patagonian inner-shelf spawning groups. A new method was developed to reconstruct three-dimensional coordinates based on the 2-D projection of the beak on a plane. Shape of the beak did not vary between groups, sexes and maturity condition of individuals. Also, no beak shape changes were observed through the ontogeny. In contrast, as larger and heavier squids were considered in shape analysis, body widened near the fin insertion, and fin area increased. Our results suggest that shape adaptations of I. argentinus through the ontogeny reflect modifications to optimize swimming performance rather than to increase gamete holding capacity. Fil: Crespi Abril, Augusto Cesar. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Nacional Patagónico; Argentina Fil: Morsan, Enrique Mario. Universidad Nacional del Comahue; Argentina Fil: Baron, Pedro Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Nacional Patagónico; Argentina

Ten released varieties and one hundred and eleven tetraploid (2n = 4x = 28, AABB) wheat accessions collected from different major wheat producing regions, consisting of totally 2904 entries were characterized for content of yellow pigment, gluten strength, thousand kernel weights, grain yield, percent of yellow berry, glumes color, awn color, seed color, beak shape and spike density. The objectives were to assess variation with respect to regions of origin, species and altitudinal classes and to study the interrelationships of the qualitative traits used for the study. The accessions and/or released varieties showed significant regional variation for all the traits used in the study, but clinal variation among altitudinal classes and species were significant (P ≤ 0.01) in 6 (60%) and 9 (90%) of the studied traits, respectively. The accessions revealed consistent variation (P ≤ 0.001) within both regions and altitudinal classes for all the traits used in the study. The sedimentation volume was positively correlated with content of yellow pigment, percent of yellow berry, thousand kernel weights, glumes color, awn color, beak shape, seed color and grain yield. The contents of yellow pigment was positively correlated with awn color, beak shape and grain yield, but negatively correlated with seed color and spike density. Generally wide variation was found in the germplasm. Particularly variation was high for the content of the yellow pigment as well as the gluten strength, which provides opportunities to be utilized for genetic improvement.

Background Morphological characters of birds reflect their adaptive evolution and ecological requirements and are also relevant to phylogenetic relationships within a group of related species. The tits (Paridae) are known to be outwardly homogeneous in shape, with one aberrant member, the Ground Tit (Pseudopodoces humilis), which is quite different from its relatives in both body morphology and beak shape. We combined traditional measurements and geometric morphometrics to quantify the variation in body morphology and beak shape of 14 Paridae species distributed in China. Based on these results, we sought to assess the contribution of phylogeny, altitude and species interactions to the evolution of morphological traits. Results The basic features for discriminating among the 14 species studied here were overall body size, the ratio of body and tail length to culmen and tarsus length, and beak shape (long/slender/pointy vs. short/robust/blunt). These dimensions clearly separate Ps. humilis and Melanochlora sultanea from the other species in shape space. Body length and PC3 of beak shape (round outline vs. straight outline) show significant phylogenetic signals. Across 14 species, altitude is related to tarsus, culmen length and PC1 of beak shape. Within Parus major, altitude is related to body weight, body length, culmen length and PC1 of body morphology. Morphological distances and geographic distances among species are positively correlated. Conclusions The body morphology of Paridae species shows extensive evolutionary changes, while their beak has mainly evolved along the long/slender/pointy vs. short/robust/blunt dimension. Only body length and beak curvature show a phylogenetic signal. Altitude correlates with multiple traits both across and within species, suggesting that altitude is an important factor in promoting morphological divergence. The deviant appearance of Ps. humilis corresponds to its foraging and feeding adaptations to high-altitude steppe habitats. Our results also show a higher level of morphological divergence with greater difference in distribution ranges among the Paridae species involved in this study. Electronic supplementary material The online version of this article (doi:10.1186/s12983-016-0162-0) contains supplementary material, which is available to authorized users.

The objective of this study was to assess beak shape variation in domestic turkeys (Meleagris gallopavo) and determine the effects of age, sex, and beak size on beak shape variation using geometric morphometrics. Dorsal and right lateral images were taken of 2442 turkeys at 6 and 18.5 weeks of age. Landmarks were digitized in tpsDig in three analyses of the dorsal upper mandible, lateral upper mandible, and lateral lower mandible shape of each turkey at both ages. The coordinate data were then subjected to a principal components analysis (PCA), multivariate regression, and a canonical variates analysis (CVA) with a Procrustes ANOVA in MorphoJ. For the dorsal images, three principal components (PCs) showed beak shape variation ranged from long, narrow, and pointed to short, wide, and blunt upper mandibles at both ages (6 weeks: 95.36%, 18.5 weeks: 92.21%). Three PCs showed the lateral upper mandible shape variation ranged from long, wide beaks with long, curved beak tips to short, narrow beaks with short, pointed beak tips at both ages (6 weeks: 94.91%, 18.5 weeks: 94.33%). Three PCs also explained 97.80% (6 weeks) and 97.11% (18.5 weeks) of the lateral lower mandible shape variation ranging from wide and round to narrow and thin lower mandibles with superior/inferior beak tip shifts. Beak size accounted for varying proportions of the beak shape variation (0.96–54.76%; P < 0.0001) in the three analyses of each age group. For all the analyses, the CVA showed sexual dimorphism in beak shape (P < 0.0001) with female upper mandibles appearing wider and blunter dorsally with long, curved beak tips laterally. Whereas male turkey upper mandibles had a narrow, pointed dorsal appearance and short, pointed beak tips laterally. Future applications of beak shape variability could have a genetic and welfare value by incorporating beak shape variation to select for specific turkey beak phenotypes as an alternative to beak treatment.

The striking diversity of bird beak shapes is an outcome of natural selection, yet the relative importance of the limitations imposed by the process of beak development on generating such variation is unclear. Untangling these factors requires mapping developmental mechanisms over a phylogeny far exceeding model systems studied thus far. We address this issue with a comparative morphometric analysis of beak shape in a diverse group of songbirds. Here we show that the dynamics of the proliferative growth zone must follow restrictive rules to explain the observed variation, with beak diversity constrained to a three parameter family of shapes, parameterized by length, depth and the degree of shear. We experimentally verify these predictions by analysing cell proliferation in the developing embryonic beaks of the zebra finch. Our findings indicate that beak shape variability in many songbirds is strongly constrained by shared properties of the developmental programme controlling the growth zone.

Objective of the Study: To evaluate the morphological variations of the coronoid process using Orthopantomograms in the western part of Maharashtra population. Materials and Methods: The study was carried out using 300 orthopantomograms (OPGs) comprised of both gender, the different shapes of the coronoid process were traced on both the right and left sides. The data obtained were subjected to statistical analysis. Results: The most common shape of the coronoid process was observed to be triangular followed by beak shape, round shape and flat shape. Conclusion: Based on the present study in western population of Maharashtra, triangular shape of coronoid process was most common in males and females.

Background The granivorous house sparrow Passer domesticus is thought to have developed its commensal relationship with humans with the rise of agriculture in the Middle East some 10,000 years ago, and to have expanded with the spread of agriculture in Eurasia during the last few thousand years. One subspecies, P. d. bactrianus, residing in Central Asia, has apparently maintained the ancestral ecology, however. This subspecies is not associated with human settlements; it is migratory and lives in natural grass- and wetland habitats feeding on wild grass seeds. It is well documented that the agricultural revolution was associated with an increase in grain size and changes in seed structure in cultivated cereals, the preferred food source of commensal house sparrow. Accordingly, we hypothesize that correlated changes may have occurred in beak and skull morphology as adaptive responses to the change in diet. Here, we test this hypothesis by comparing the skull shapes of 101 house sparrows from Iran, belonging to five different subspecies, including the non-commensal P. d. bactrianus, using geometric morphometrics. Results The various commensal house sparrow subspecies share subtle but consistent skeletal features that differ significantly from those of the non-commensal P. d. bactrianus. Although there is a marked overall size allometry in the data set, the shape difference between the ecologically differentiated sparrows cannot be explained by differences in size alone. Relative to the size allometry commensal house sparrows exhibit a skull shape consistent with accelerated development (heterochrony), resulting in a more robust facial cranium and a larger, more pointed beak. Conclusion The difference in skull shape and robustness of the beak between commensal and non-commensal house sparrows is consistent with adaptations to process the larger and rachis encapsulated seeds of domesticated cereals among human associated populations.

Humans are an increasingly common influence on the evolution of natural populations. Potential arenas of influence include altered evolutionary trajectories within populations and modifications of the process of divergence among populations. We consider this second arena in the medium ground finch (Geospiza fortis) on Santa Cruz Island, Galapagos, Ecuador. Our study compared the G. fortis population at a relatively undisturbed site, El Garrapatero, to the population at a severely disturbed site, Academy Bay, which is immediately adjacent to the town of Puerto Ayora. The El Garrapatero population currently shows beak size bimodality that is tied to assortative mating and disruptive selection, whereas the Academy Bay population was historically bimodal but has lost this property in conjunction with a dramatic increase in local human population density. We here evaluate potential ecological-adaptive drivers of the differences in modality by quantifying relationships between morphology (beak and head dimensions), functional performance (bite force), and environmental characteristics (diet). Our main finding is that associations among these variables are generally weaker at Academy Bay than at El Garrapatero, possibly because novel foods are used at the former site irrespective of individual morphology and performance. These results are consistent with the hypothesis that the rugged adaptive landscapes promoting and maintaining diversification in nature can be smoothed by human activities, thus hindering ongoing adaptive radiation. ispartof: Evolution vol:65 issue:8 pages:2258-2272 ispartof: location:United States status: published

Beak shapes in nine species of Southern Ocean octopodids were measured using seven size-standardized ratios. The results were analysed using principal component analysis and discriminant function analysis and show that beak shape may be used as a taxonomic character to distinguish between genera, but not between species. Stepwise discriminant function analysis indicated that all seven ratios were required to maximize discrimination between beaks. A phenogram constructed from a matrix of Mahalanobis distances differed from a dendrogram produced from genetic data. This suggests that, although useful for discrimination, beak morphology is probably not suitable for constructing phylogenies.

Darwin's finches are a model system in ecological and evolutionary research, but surprisingly little is known about their skull morphology and development. Indeed, only the early beak development and external variation in adult beak shape has been studied. Understanding the development of the skull from embryo up to the adult is important to gain insights into how selection acts upon, and drives, variation in beak shape. Here, we provide a detailed description of the skeletal development of the skull in the medium ground finch (Geospiza fortis). Although the ossification sequence of the cranial elements is broadly similar to that observed for other birds, some differences can be observed. Unexpectedly, our data show that large changes in skull shape take place between the nestling and the juvenile phases. The reorientation of the beak, the orbit and the formation of well-developed processes and cristae suggest that these changes are likely related to the use of the beak after leaving the nest. This suggests that the active use of the jaw muscles during seed cracking plays an important role in shaping the adult skull morphology and may be driving some of the intra-specific variation observed in species such as G. fortis. Investigating the development of the jaw muscles and their interaction with the observed ossification and formation of the skull and lower jaw would allow further insights into the ecology and evolution of beak morphology in Darwin's finches.

Phenotypic and seed protein analyses were performed on 31 accessions of Lima bean assembled in Ghana. Data on 16 phenotypic characters consisting of eight quantitative and eight qualitative were analysed. There were significant differences among the accessions based on the eight quantitative characters. Seed protein analysis showed 17 bands with relative mobility of bands, which ranged from 0.01 to 0.86. An ordinal logistic regression analysis showed significant evidence for seed coat, pod beak shape and seed size association. Cluster analysis based on both phenotypic and protein data provided evidence for differences among the accessions. Quantitative characters were associated with some specific clusters.

Avian embryos, which have been studied scientifically since Aristotle, continue to persevere as invaluable research tools, especially for our understanding of the development and evolution of the craniofacial skeleton. Whether the topic is beak shape in Darwin’s finches or signaling interactions that underlie bone and tooth formation, birds offer advantages for craniofacial biology that uniquely complement the strengths of other vertebrate model systems, such as fish, frogs, and mice. Several papers published during the past few years have helped pinpoint molecular and cellular mechanisms that pattern the face and jaws through experiments that could only have been done together with our feathered friends. Ultimately, such knowledge will be essential for devising novel clinical approaches to treat and/or prevent diseases, injuries, and birth defects that affect the human craniofacial skeleton. Here we review recent insights plucked from avians on key developmental processes that generate craniofacial diversity.

Beak shape is a classic example of evolutionary diversification. Beak development in chicken and duck was used to examine morphological variations among avian species. There is only one proliferative zone in the frontonasal mass of chickens, but two in ducks. These growth zones are associated with bone morphogenetic protein 4 (BMP4) activity. By “tinkering” with BMP4 in beak prominences, the shapes of the chicken beak can be modulated.