Search

Atrial wall thickness (AWT) is a significant factor in understanding the pathological physiological substrate of atrial fibrillation, with a potentially substantial impact on the outcomes of catheter ablation procedures. Precise measurements of the AWT may provide valuable insights for categorising patients with AF and planning targeted interventions. Objectives: The purpose of this study was to evaluate the characteristics of the left atrium (LA) using non-invasive multidetector computed tomography (MDCT) scans and subsequent three-dimensional (3D) image post-processing using novel software designed to calculate atrial thickness dimensions and mass. Methods: We retrospectively analysed 128 consecutive patients (33.6% females; mean age 55.6 ± 11.2 years) referred for AF ablation (37 with persistent AF and 91 with paroxysmal AF) who underwent preprocedural MDCT. The images were post-processed and analysed using the ADAS software (Galgo Medical), automatically calculating the LA volume and regional wall thickness. In addition, the software employed a regional semi-automatic LA parcellation feature that divided the atrial wall into 12 segments, generating atrial wall thickness (AWT) maps per segment for each patient. Results: This study demonstrated considerable variability in the average thickness of LA walls, with the anterior segments being the thickest across the cohort. Distinct sex-specific differences were observed, with males exhibiting greater anterior and septal wall thickness than females. No significant associations were identified between the average AWT and body mass index, LA volume, or sphericity. Survival analysis conducted over 24 months revealed a meaningful relationship between mean anterior wall thickness and recurrence-free survival, with increased thickness associated with a lower likelihood of AF-free survival. No such relationship was observed for the indexed LA volume. Conclusions: The variability in AWT and its association with recurrence-free survival following AF ablation suggest that AWT should be considered when stratifying patients for AF management and ablation strategies. These findings underscore the need for personalised treatment approaches and further research on the interplay of the structural properties of the left atrium as factors that can serve as important prognostic markers in AF treatment. [ABSTRACT FROM AUTHOR]

Abstract Background Hypertrophic cardiomyopathy (HCM) is frequently associated with atrial fibrillation (AF). We compared clinical, echocardiographic, and electrophysiological parameters between HCM subtypes and those without HCM at AF catheter ablation (AFCA) and analyzed post‐AFCA reverse remodeling and AF recurrence based on HCM presence and subtype. Methods Among 5161 consecutive patients who underwent de novo AFCA, we included HCM patients and control patients who were age‐, gender‐, and AF type‐matched. Between AF‐HCM patients and controls, we compared baseline values for left atrium (LA) wall thickness (LAWT), reverse remodeling at 1‐year follow‐up, and procedural outcomes over the course of follow‐up between two groups. Results A total of 122 AF‐HCM patients and 318 control patients were included. AF‐HCM patients had more frequent heart failure and higher LA diameter, E/Em, and LA pressure (all, p

Abstract Background High‐power short‐duration (HPSD) ablation creates wide, shallow lesions using radiofrequency (RF) heating. It is uncertain if adjusting RF energy based on atrial wall thickness provides extra benefits. We studied the safety and effectiveness of tailored HPSD energy based on left atrial (LA) wall thickness (LAWT) for circumferential pulmonary vein isolation (CPVI) in patients with paroxysmal atrial fibrillation (PAF). Methods We enrolled 212 patients (68.4% male, mean age: 59.5 ± 11.0 years) and randomly assigned them to two groups: LAWT‐guided CPVI (WT, n = 108) and conventional CPVI (control, n = 104). Both groups used an open irrigated‐tip deflectable catheter to apply 50 W for 10 s to the posterior LA, while controls used 60 W for 15 s on other LA regions. RF delivery time in WT was titrated (15 s at LAWT > 2.1 mm, 13 s at 1.4–2.1 mm, and 11 s at .999). The total procedure time, cardioversion rate, and post‐procedural AAD prescription rates did not significantly differ between the groups. Conclusions The LAWT‐guided energy titration strategy did not result in improved procedural safety and efficacy compared to the conventional 50–60 W‐HPSD CPVI in patients with PAF.

Background: Adapting the ablation index (AI) to the left atrial wall thickness (LAWT) derived from computed tomography angiography (CTA) allows for a personalized approach that showed to improve PVI safety and outcomes. Methods: Three observers with different degrees of experience performed complete LAWT analysis of CTA for 30 patients and repeated the analysis for 10 of these patients. Intra- and inter-observer reproducibility of these segmentations was assessed. Results: Geometric congruence of repeated reconstruction of LA endocardial surface showed that 99.4% of points in the 3D reconstructed mesh were within < 1 mm distance for the intra-observer variability and 95.1% for the inter-observer. For the LA epicardial surface, an 82.4% of points were within < 1 mm for intra-observer and a 77.7% for inter-observer. A 1.99% of points were further than 2 mm for the intra-observer and a 4.1% for the inter-observer. Colour agreement between LAWT maps showed that a 95.5% and a 92.9% intra- and inter-observer respectively presented the same colour or a change to the colour immediately above or below. The ablation index (AI), which was adapted to this LAWT colour maps to perform a personalized pulmonary vein isolation (PVI), showed an average difference in the derived AI lower than 25 units in all cases. For all analyses, the concordance increased with user-experience. Conclusion: Geometric congruence of LA shape was high, for both endocardial and epicardial segmentations. LAWT measurements were reproducible, increasing with user experience. This translated into a negligible impact in the target AI. [ABSTRACT FROM AUTHOR]

Abstract Background Some of atrial fibrillation (AF) drivers are found in normal/mild late‐gadolinium enhancement (LGE) areas, as well as moderate ones. The atrial wall thickness (AWT) has been reported to be important as a possible AF substrate. However, the AWT and degree of LGEs as an AF substrate has not been fully validated in humans. Objective The purpose of this study was to evaluate the impact of the AWT in normal/mild LGE areas on AF drivers. Methods A total of 287 segments in 15 persistent AF patients were assessed. AF drivers were defined as non‐passively activated areas (NPAs), where rotational activation was frequently observed, and were detected by the novel real‐time phase mapping (ExTRa Mapping), mild LGE areas were defined as areas with a volume ratio of the enhancement voxel of 0% to

Despite advancements in high-precision segmentation technology for computed tomographic angiography (CTA)-based cardiac wall segmentation, the accurate detection of the endocardial (Endo) and epicardial (Epi) boundaries remains a prerequisite for automated measurements of the cardiac wall thickness (WT). We proposed a novel algorithm for automated three-dimensional (3D) atrial WT (AWT) measurements, including an automatic Endo-Epi boundary detection. We detected the boundaries that were topologically indistinguishable due to an open geometry at the anatomical boundaries using the combined Convex hull and Poisson solver methods. The Laplace equation for the WT measurement was solved by a partial differential equation combining the two detected boundaries of the myocardial wall. We verified the robustness of our algorithm in mask images of the atrial wall that were separated from the CTA images of 20 patients and a phantom model. The accuracy of the automatically detected Endo-Epi boundaries was acceptable as compared to that manually extracted from the phantom model (Dice coefficient = 0.979). The 3D AWTs calculated by the novel automated method from the CTA images obtained from 20 patients with atrial fibrillation had

Background: Pulmonary vein isolation (PVI) implies unavoidable ablation lesions to the left atrial posterior wall, which is closely related to the esophagus, leading to several potential complications. This study evaluates the usefulness of the esophageal fingerprint in avoiding temperature rises during paroxysmal atrial fibrillation (PAF) ablation. Methods: Isodistance maps of the atrio-esophageal relationship (esophageal fingerprint) were derived from the preprocedural computerized tomography. Patients were randomized (1:1) into two groups: (1) PRINT group, the PVI line was modified according to the esophageal fingerprint; (2) CONTROL group, standard PVI with operator blinded to the fingerprint. The primary endpoint was temperature rise detected by intraluminal esophageal temperature probe monitoring. Ablation settings were as specified on the Ablate BY-LAW study protocol. Results: Sixty consecutive patients referred for paroxysmal AF ablation were randomized (42 (70%) men, mean age 60 ± 11 years). Temperature rise (> 39.1 °C) occurred in 5 (16%) patients in the PRINT group vs. 17 (56%) in the CONTROL group (p < 0.01). Three AF recurrences were documented at a mean follow-up of 12 ± 3 months (one (3%) in the PRINT group and 2 (6.6%) in the CONTROL group, p = 0.4). Conclusion: The esophageal fingerprint allows for a reliable identification of the esophageal position and its use for PVI line deployment results in less frequent esophageal temperature rises when compared to the standard approach. Further studies are needed to evaluate the impact of PVI line modification to avoid esophageal heating on long-term outcomes. The development of new imaging-derived tools could ultimately improve patient safety (NCT04394923). [ABSTRACT FROM AUTHOR]

Aims: Whether adjusting the duration of ablation based on left atrial wall thickness (LAWT) provides extra benefits for pulmonary vein (PV) isolation for atrial fibrillation (AF) is uncertain. We studied the safety and efficacy of tailored cryoballoon PV isolation (CB-PVI) based on LAWT for paroxysmal AF., Methods and Results: Two hundred seventy-seven patients with paroxysmal AF refractory to anti-arrhythmic drug were randomized 1:1 to either LAWT-guided CB-PVI (n = 135) and empirical CB-PVI (n = 142). Empirical CB-PVI was performed using a 28 mm cryoballoon with recommended application for 240 s per ablation. Cryoapplication in the LAWT-guided group was titrated (additional application for 120 s at PVs, where >25% of the circumference includes segments with LAWT > 2.5 mm and reduced baseline application to 180 s at PVs where >75% of the circumference includes segments with LAWT < 1.5 mm) according to the computed tomography LAWT colour map. The primary endpoint was freedom from any documented atrial arrhythmia of more than 30 s without antiarrhythmic medication, after a single ablation procedure. During a mean follow-up of 18.7 months, patients in the LAWT-guided CB-PVI group (70.8%) had a higher event-free rate from primary endpoint than those in the empirical CB-PVI group (54.4%; hazard ratio 0.64, 95% confidence interval 0.42-0.99; P = 0.043). No differences were observed between the groups in complication rates (3.0% in LAWT-guided vs. 4.9% in empirical CB-PVI). The total procedure time was extended in the LAWT group than in the empirical group (mean 70.2 vs. 65.2 min, respectively)., Conclusion: The LAWT-guided energy titration strategy improved freedom from atrial arrhythmia recurrence, compared with conventional strategy., Competing Interests: Conflict of interest: none declared., (© The Author(s) 2024. Published by Oxford University Press on behalf of the European Society of Cardiology.)

Background: Some of atrial fibrillation (AF) drivers are found in normal/mild late‐gadolinium enhancement (LGE) areas, as well as moderate ones. The atrial wall thickness (AWT) has been reported to be important as a possible AF substrate. However, the AWT and degree of LGEs as an AF substrate has not been fully validated in humans. Objective: The purpose of this study was to evaluate the impact of the AWT in normal/mild LGE areas on AF drivers. Methods: A total of 287 segments in 15 persistent AF patients were assessed. AF drivers were defined as non‐passively activated areas (NPAs), where rotational activation was frequently observed, and were detected by the novel real‐time phase mapping (ExTRa Mapping), mild LGE areas were defined as areas with a volume ratio of the enhancement voxel of 0% to <10%. The AWT was defined as the minimum distance from the manually determined endocardium to the epicardial border on the LGE‐MRI. Results: NPAs were found in 20 (18.0%) of 131 normal/mild LGE areas where AWT was significantly thicker than that in the passively activated areas (PAs) (2.5 ± 0.3 vs. 2.2 ± 0.3 mm, p <.001). However, NPAs were found in 41 (26.3%) of 156 moderate LGE areas where AWT was thinner than that of PAs (2.1 ± 0.2 mm vs. 2.23 ± 0.3 mm, p =.02). An ROC curve analysis yielded an optimal cutoff value of 2.2 mm for predicting the presence of an NPA in normal/mild LGE areas. Conclusion: The location of AF drivers in normal/mild LGE areas might be more accurately identified by evaluating AWT. [ABSTRACT FROM AUTHOR]

The presence of a low-voltage areas (LVAs) is a major feature of the progression of atrial fibrillation. Typically, the LVA is determined by invasive left atrial voltage mapping. In addition to pulmonary vein electrical isolation, Voltage-guided substrate modification by targeting LVAs in addition to PVI has been shown to be superior to conventional PVI “only” approaches regarding freedom from AF recurrences after ablation. Recent studies have found Atrial wall thickness correlates with low voltage areas, and the degree of atrial myocardial fibrosis can be better assessed by CT or MRI in combination with voltage mapping, which might help reduce the recurrence of AF after catheter ablation.

Aims: To determine if adapting the ablation index (AI) to the left atrial wall thickness (LAWT), which is a determinant of lesion transmurality, is feasible, effective, and safe during paroxysmal atrial fibrillation (PAF) ablation.Methods and Results: Consecutive patients referred for PAF first ablation. Left atrial wall thickness three-dimensional maps were obtained from multidetector computed tomography and integrated into the CARTO navigation system. Left atrial wall thickness was categorized into 1 mm layers and AI was titrated to the LAWT. The ablation line was personalized to avoid thicker regions. Primary endpoints were acute efficacy and safety, and freedom from atrial fibrillation (AF) recurrences. Follow-up (FU) was scheduled at 1, 3, 6, and every 6 months thereafter. Ninety patients [60 (67%) male, age 58 ± 13 years] were included. Mean LAWT was 1.25 ± 0.62 mm. Mean AI was 366 ± 26 on the right pulmonary veins with a first-pass isolation in 84 (93%) patients and 380 ± 42 on the left pulmonary veins with first-pass in 87 (97%). Procedure time was 59 min (49-66); radiofrequency (RF) time 14 min (12.5-16); and fluoroscopy time 0.7 min (0.5-1.4). No major complication occurred. Eighty-four out of 90 (93.3%) patients were free of recurrence after a mean FU of 16 ± 4 months.Conclusion: Personalized AF ablation, adapting the AI to LAWT allowed pulmonary vein isolation with low RF delivery, fluoroscopy, and procedure time while obtaining a high rate of first-pass isolation, in this patient population. Freedom from AF recurrences was as high as in more demanding ablation protocols. A multicentre trial is ongoing to evaluate reproducibility of these results. [ABSTRACT FROM AUTHOR]

Background and Objectives: A rare case of cor triatriatum sinistrum in combination with anomalies in the atrial septum and in the right atrium of a 60-year-old female body donor is described here. Materials and Methods: In addition to classical dissection, ultrasound and magnetic resonance imaging, computer tomography and cinematic rendering were performed. In a reference series of 59 regularly formed hearts (33 men, 26 women), we looked for features in the left and right atrium or atrial septum. In addition, we measured the atrial and ventricular wall thickness in 15 regularly formed hearts (7 men, 8 women). Results: In the case described, the left atrium was partly divided into two chambers by an intra-atrial membrane penetrated by two small openings. The 2.5 cm-high membrane originated in the upper level of the oval fossa and left an opening of about 4 cm in diameter. Apparently, the membrane did not lead to a functionally significant flow obstruction due to the broad intra-atrial communication between the proximal and distal chamber of the left atrium. In concordance with this fact, left atrial wall thickness was not elevated in the cor triatriatum sinistrum when compared with 15 regularly formed hearts. In addition, two further anomalies were found: 1. the oval fossa was deepened and arched in the direction of the left atrium; 2. the right atrium showed a membrane-like structure at its posterior and lateral walls, which began at the lower edge of the oval fossa. It probably corresponds to a strongly developed eustachian valve (valve of the inferior vena cava). Conclusions: The case described suggests that malformations in the development of the atrial septum and in the regression of the valve of the right sinus vein are involved in the pathogenesis of cor triatriatum sinistrum. [ABSTRACT FROM AUTHOR]

Background: Left atrial wall thickness (LAWT) has been related to pulmonary vein (PV) reconnections after atrial fibrillation (AF) ablation. The aim was to integrate 3D‐LAWT maps in the navigation system and analyze the relationship with local reconnection sites during AF‐redo procedures. Methods: Consecutive patients referred for AF‐redo ablation were included. Procedure was performed using a single catheter technique. LAWT maps obtained from multidetector computerized tomography (MDCT) were imported into the navigation system. LAWT of the circumferential PV line, the reconnected segment and the reconnected point, were analyzed. Results: Sixty patients [44 (73%) male, age 61 ± 10 years] were included. All reconnected veins were isolated using a single catheter technique with 55 min (IQR 47–67) procedure time and 75 s (IQR 50–120) fluoroscopy time. Mean LAWT of the circumferential PV line was 1.46 ± 0.22 mm. The reconnected segment was thicker than the rest of segments of the circumferential PV line (2.05 + 0.86 vs. 1.47 + 0.76, p <.001 for the LPVs; 1.55 + 0.57 vs. 1.27 + 0.57, p <.001 for the RPVs). Mean reconnection point wall thickness (WT) was at the 82nd percentile of the circumferential line in the LPVs and at the 82nd percentile in the RPVs. Conclusion: A single catheter technique is feasible and efficient for AF‐redo procedures. Integrating the 3D‐LAWT map into the navigation system allows a direct periprocedural estimation of the WT at any point of the LA. Reconnection points were more frequently present in thicker segments of the PV line. The use of 3D‐LAWT maps can facilitate reconnection point identification during AF‐redo ablation. [ABSTRACT FROM AUTHOR]

Background: Hypertrophic cardiomyopathy (HCM) is frequently associated with atrial fibrillation (AF). We compared clinical, echocardiographic, and electrophysiological parameters between HCM subtypes and those without HCM at AF catheter ablation (AFCA) and analyzed post-AFCA reverse remodeling and AF recurrence based on HCM presence and subtype., Methods: Among 5161 consecutive patients who underwent de novo AFCA, we included HCM patients and control patients who were age-, gender-, and AF type-matched. Between AF-HCM patients and controls, we compared baseline values for left atrium (LA) wall thickness (LAWT), reverse remodeling at 1-year follow-up, and procedural outcomes over the course of follow-up between two groups., Results: A total of 122 AF-HCM patients and 318 control patients were included. AF-HCM patients had more frequent heart failure and higher LA diameter, E/Em, and LA pressure (all, p  < .001). However, LAWT did not differ from control group. A year after AFCA, degree of LA reverse remodeling was significantly lower in AF-HCM than in control group (ΔLA dimension, p  = .025). Nonapical HCM (HR 1.71; 95% CI 1.05-2.80), persistent AF (HR 1.46; 95% CI 1.05-2.04), and LA dimension (HR 1.04; 95% CI 1.01-1.06) were independent risk factors for AF recurrence. During 78.0 months of follow-up, nonapical HCM patients showed higher AF recurrence rate than both apical HCM (log-rank p  = .005) and control patients (log-rank p  = .002)., Conclusions: The presence of HCM, particularly nonapical HCM, displayed increased LA hemodynamic loading with diastolic dysfunction and had poorer rhythm outcomes after AFCA compared to both apical HCM and control group., Competing Interests: The authors declare no conflict of interest., (© 2024 The Authors. Journal of Arrhythmia published by John Wiley & Sons Australia, Ltd on behalf of Japanese Heart Rhythm Society.)

Purpose: To identify a potential morphological marker of remodeling and electrophysiological dysfunction, we investigated if low wall thickness is associated with low-voltage areas (LVAs) in the left atrium.Methods: Wall thickness was measured by computed tomography and LVA (% area with bipolar voltage < 0.5 mV) by voltage mapping in 43 paroxysmal AF patients. The left atrium was divided into five segments: septal wall, anterior wall, roof wall, posterior wall, and bottom wall in regional analysis.Results: Left atrial wall thickness and LVA were 3.2 ± 0.6 mm and 14% ± 9%, respectively. Multivariate analysis identified left atrial wall thickness and volume as independent determinants of left atrial LVA (thickness, standardized β - 0.374, 95%CI - 23.289 to - 4.534, P = 0.005; volume, standardized β 0.452, 95%CI 0.049-0.214, P = 0.002). In regional analysis, significant LVA (> 10% of segment surface area) was observed in 123 of 215 segments (57%). Segments in the low tertile of wall thickness (< 1.76 mm) had larger LVAs compared with segments in middle (1.76-2.14 mm) and high tertiles (≥ 2.14 mm) (low tertile, 20.3% ± 14.9%; middle tertile, 12.6% ± 11.2%; high tertile, 12.5% ± 12.1%; low vs. middle tertile, P = 0.001; low vs. high tertile, P = 0.001). Area under the receiver operating curve of wall thickness was 0.706 for prediction of significant LVA. A thickness cut-off of 1.90 mm yielded 62% sensitivity, 73% specificity, 75% positive predictive value, and 59% negative predictive value for significant LVA.Conclusion: A thin left atrial wall is an independent predictor of LVA in patients with paroxysmal AF. [ABSTRACT FROM AUTHOR]

Background: High-power short-duration (HPSD) ablation creates wide, shallow lesions using radiofrequency (RF) heating. It is uncertain if adjusting RF energy based on atrial wall thickness provides extra benefits. We studied the safety and effectiveness of tailored HPSD energy based on left atrial (LA) wall thickness (LAWT) for circumferential pulmonary vein isolation (CPVI) in patients with paroxysmal atrial fibrillation (PAF)., Methods: We enrolled 212 patients (68.4% male, mean age: 59.5 ± 11.0 years) and randomly assigned them to two groups: LAWT-guided CPVI (WT, n  = 108) and conventional CPVI (control, n  = 104). Both groups used an open irrigated-tip deflectable catheter to apply 50 W for 10 s to the posterior LA, while controls used 60 W for 15 s on other LA regions. RF delivery time in WT was titrated (15 s at LAWT > 2.1 mm, 13 s at 1.4-2.1 mm, and 11 s at <1.4 mm) according to the computed tomogram-myocardial thickness color map., Results: After a mean follow-up of 13.4 ± 7.0 months, the WT and control groups showed no significant difference regarding clinical recurrence rate (13.9% vs. 5.8%, respectively; p  = .061) and major complication rate (4.6% vs. 3.8%, respectively; p  > .999). The total procedure time, cardioversion rate, and post-procedural AAD prescription rates did not significantly differ between the groups., Conclusions: The LAWT-guided energy titration strategy did not result in improved procedural safety and efficacy compared to the conventional 50-60 W-HPSD CPVI in patients with PAF., Competing Interests: We previously developed automated customized software (AMBER, LaonMed, Korea) to measure myocardial thickness from cardiac CT. We registered the patent for the above technology on June 2, 2022, and had the patent number (10‐2022‐0067621). The authors declare no conflict of interest, except for the patent related to wall thickness measurement software., (© 2024 The Authors. Journal of Arrhythmia published by John Wiley & Sons Australia, Ltd on behalf of Japanese Heart Rhythm Society.)

Introduction: Catheter ablation (CA) is a common treatment for atrial fibrillation (AF), but the knowledge of optimal ablation sites, and hence clinical outcomes, are suboptimal. Increasing evidence suggest that ablation strategies based on patient-specific substrates information, such as distributions of fibrosis and atrial wall thickness (AWT), may be used to improve therapy. We hypothesized that competing influences of large AWT gradients and fibrotic patches on conductive properties of atrial tissue can determine locations of re-entrant drivers (RDs) sustaining AF.Methods: Two sets of models were used: (1) a simple model of 3D atrial tissue slab with a step change in AWT and a synthetic fibrosis patch, and (2) 3D models based on patient-specific right atrial (RA) and left atrial (LA) geometries. The latter were obtained from four healthy volunteers and two AF patients, respectively, using magnetic resonance imaging (MRI). A synthetic fibrotic patch was added in the RA and fibrosis distributions in the LA were obtained from gadolinium-enhanced MRI of the same patients. In all models, 3D geometry was combined with the Fenton-Karma atrial cell model to simulate RDs.Results: In the slab, RDs drifted toward, and then along the AWT step. However, with additional fibrosis, the RDs were localized in regions between the step and fibrosis. In the RA, RDs drifted toward and anchored to a large AWT gradient between the crista terminalis (CT) region and the surrounding atrial wall. Without such a gradient, RDs drifted toward the superior vena cava (SVC) or the tricuspid valve (TSV). With additional fibrosis, RDs initiated away from the CT anchored to the fibrotic patch, whereas RDs initiated close to the CT region remained localized between the two structures. In the LA, AWT was more uniform and RDs drifted toward the pulmonary veins (PVs). However, with additional fibrotic patches, RDs either anchored to them or multiplied.Conclusion: In the RA, RD locations are determined by both fibrosis and AWT gradients at the CT region. In the LA, they are determined by fibrosis due to the absence of large AWT gradients. These results elucidate mechanisms behind the stabilization of RDs sustaining AF and can help guide ablation therapy.

Persistent atrial fibrillation (AF) is not effectively treated due to a lack of adequate tools for identifying patient-specific AF substrates. Recent studies revealed that in 30-50% of patients, persistent AF is maintained by localized drivers not only in the left atrium (LA) but also in the right atrium (RA). The chamber-specific atrial wall thickness (AWT) features underlying AF remain elusive, though the important role of AWT in AF is widely acknowledged. We aimed to provide direct evidence of the existence of distinguished RA and LA AWT features underlying AF drivers by analysing functionally and structurally mapped human hearts ex vivo . Coronary-perfused intact human atria ( n = 7, 47 ± 14 y.o.; two female) were mapped using panoramic near-infrared optical mapping during pacing-induced AF. Then the hearts were imaged at approximately 170 µm 3 resolution by 9.4 T gadolinium-enhanced MRI. The heart was segmented, and 3D AWT throughout atrial chambers was estimated and analysed. Optical mapping identified six localized RA re-entrant drivers in four hearts and four LA drivers in three hearts. All RA AF drivers were anchored to the pectinate muscle junctions with the crista terminalis or atrial walls. The four LA AF drivers were in the posterior LA. RA ( n = 4) with AF drivers were thicker with greater AWT variation than RA ( n = 3) without drivers (5.4 ± 2.6 mm versus 5.0 ± 2.4 mm, T -test p < 0.05; F -test p < 0.05). Furthermore, AWT in RA driver regions was thicker and varied more than in RA non-driver regions (5.1 ± 2.5 mm versus 4.4 ± 2.2 mm, T -test p < 0.05; F -test p < 0.05). On the other hand, LA ( n = 3) with drivers was thinner than the LA ( n = 4) without drivers. In particular, LA driver regions were thinner than the rest of LA regions (3.4 ± 1.0 mm versus 4.2 ± 1.0 mm, T -test p < 0.05). This study demonstrates chamber-specific AWT features of AF drivers. In RA, driver regions are thicker and have more variable AWT than non-driver regions. By contrast, LA drivers are thinner than non-drivers. Robust evaluation of patient-specific AWT features should be considered for chamber-specific targeted ablation., Competing Interests: The authors declare no conflicts of interest., (© 2023 The Authors.)

Influence of left atrial wall thickness on outcome of catheter ablation for atrial fibrillation (AF) is unclear. Overall, 213 patients with AF (128 paroxysmal and 85 persistent) received ablation. We measured the wall thickness of 16 and 19 areas in the pulmonary vein antrum (PVWT) and left atrial body (LAWT), respectively. Coefficient of variation of wall thickness (CV-WT) was calculated to assess heterogeneity in the left atrial wall thickness. In patients with paroxysmal AF, maximum PVWT, mean PVWT, maximum LAWT, and CV-WT were higher in AF recurrent group than in AF-free group (maximum PVWT, 2.85 ± 0.52 vs. 2.50 ± 0.45 mm, P = 0.003; mean PVWT, 1.59 ± 0.13 vs. 1.50 ± 0.15 mm, P = 0.018; maximum LAWT, 3.85 ± 0.77 vs. 3.41 ± 0.61 mm, P = 0.005; CV-WT, 0.34 ± 0.06 vs. 0.32 ± 0.05, P = 0.039). In patients with persistent AF, maximum PVWT, mean PVWT, maximum LAWT, mean LAWT, and CV-WT were higher in the AF-recurrent group than in the AF-free group (maximum PVWT, 2.52 ± 0.36 vs. 2.31 ± 0.36 mm, P = 0.031; mean PVWT, 1.53 ± 0.12 vs. 1.45 ± 0.14 mm, P = 0.036; maximum LAWT, 3.68 ± 0.75 vs. 3.11 ± 0.50 mm, P < 0.001; mean LAWT, 2.34 ± 0.35 vs. 2.13 ± 0.21 mm, P = 0.002; CV-WT, 0.35 ± 0.06 vs. 0.31 ± 0.05, P = 0.005). Thick and heterogeneous left atrial wall contributes to AF recurrence after ablation. [ABSTRACT FROM AUTHOR]

Introduction: Catheter ablation (CA) is a common treatment for atrial fibrillation (AF), but the knowledge of optimal ablation sites, and hence clinical outcomes, are suboptimal. Increasing evidence suggest that ablation strategies based on patient-specific substrates information, such as distributions of fibrosis and atrial wall thickness (AWT), may be used to improve therapy. We hypothesized that competing influences of large AWT gradients and fibrotic patches on conductive properties of atrial tissue can determine locations of re-entrant drivers (RDs) sustaining AF. Methods: Two sets of models were used: (1) a simple model of 3D atrial tissue slab with a step change in AWT and a synthetic fibrosis patch, and (2) 3D models based on patient-specific right atrial (RA) and left atrial (LA) geometries. The latter were obtained from four healthy volunteers and two AF patients, respectively, using magnetic resonance imaging (MRI). A synthetic fibrotic patch was added in the RA and fibrosis distributions in the LA were obtained from gadolinium-enhanced MRI of the same patients. In all models, 3D geometry was combined with the Fenton-Karma atrial cell model to simulate RDs. Results: In the slab, RDs drifted toward, and then along the AWT step. However, with additional fibrosis, the RDs were localized in regions between the step and fibrosis. In the RA, RDs drifted toward and anchored to a large AWT gradient between the crista terminalis (CT) region and the surrounding atrial wall. Without such a gradient, RDs drifted toward the superior vena cava (SVC) or the tricuspid valve (TSV). With additional fibrosis, RDs initiated away from the CT anchored to the fibrotic patch, whereas RDs initiated close to the CT region remained localized between the two structures. In the LA, AWT was more uniform and RDs drifted toward the pulmonary veins (PVs). However, with additional fibrotic patches, RDs either anchored to them or multiplied. Conclusion: In the RA, RD locations are determined by both fibrosis and AWT gradients at the CT region. In the LA, they are determined by fibrosis due to the absence of large AWT gradients. These results elucidate mechanisms behind the stabilization of RDs sustaining AF and can help guide ablation therapy. [ABSTRACT FROM AUTHOR]

Background Tissue thickness at the site of ablation is a determinant of lesion transmurality. We reported the feasibility, safety, and efficacy of longstanding persistent atrial fibrillation ablation, incorporating deliberate left atrial appendage (LAA) isolation and occlusion, and identified systematic differences in ostial LAA tissue thickness in a matched cohort of cadaveric specimens. Methods Preprocedural cardiac computed tomography (CCT) scans were acquired from 22 patients undergoing LAA isolation and subsequent occlusion. Using a novel CCT wall thickness algorithm, LAA ostial wall thickness was assessed in vivo, compared with measurements from the cadaveric specimens, and analyzed for differences between regions that demonstrated acute electrical reconnection and those that did not. Results Mean tissue thickness calculated for each LAA ostial quadrant was 2.1 (±0.6) mm (anterior quadrant), 1.9 (±0.4) mm (superior quadrant), 1.5 (±0.4) mm (posterior quadrant), and 1.8 (±0.7) mm (inferior quadrant). Tissue was significantly thicker in the anterior (P = 0.004) and superior quadrants (P = 0.014) than the posterior quadrant. Higher thickness measurements were recorded from quadrants demonstrated to be thicker from histology. Tissue was significantly thicker in regions that demonstrated acute electrical reconnection (1.9 (±0.6) mm) when compared with those that did not (1.6 (±0.5) mm) (P = 0.008). Conclusions CCT imaging may be used to detect differences in wall thickness at different atrial locations and success of LAA ablation may be affected by local tissue thickness. Atrial wall thickness may need to be considered as a metric to guide titration of radiofrequency energy for safe and successful ablation. [ABSTRACT FROM AUTHOR]

Knowledge of atrial wall thickness (AWT) has the potential to provide important information for patient stratification and the planning of interventions in atrial arrhythmias. To date, information about AWT has only been acquired in post-mortem or poor-contrast computed tomography (CT) studies, providing limited coverage and highly variable estimates of AWT. We present a novel contrast agent-free MRI sequence for imaging AWT and use it to create personalized AWT maps and a biatrial atlas. A novel black-blood phase-sensitive inversion recovery protocol was used to image ten volunteers and, as proof of concept, two atrial fibrillation patients. Both atria were manually segmented to create subject-specific AWT maps using an average of nearest neighbors approach. These were then registered non-linearly to generate an AWT atlas. AWT was 2.4 ± 0.7 and 2.7 ± 0.7 mm in the left and right atria, respectively, in good agreement with post-mortem and CT data, where available. AWT was 2.6 ± 0.7 mm in the left atrium of a patient without structural heart disease, similar to that of volunteers. In a patient with structural heart disease, the AWT was increased to 3.1 ± 1.3 mm. We successfully designed an MRI protocol to non-invasively measure AWT and create the first whole-atria AWT atlas. The atlas can be used as a reference to study alterations in thickness caused by atrial pathology. The protocol can be used to acquire personalized AWT maps in a clinical setting and assist in the treatment of atrial arrhythmias. [ABSTRACT FROM PUBLISHER]

BackgroundLow contact force and force–time integral (FTI) during catheter ablation are associated with ineffective lesion formation, whereas excessively high contact force and FTI may increase the risk of complications. We sought to evaluate the optimal FTI for pulmonary vein (PV) isolation based on atrial wall thickness under the ablation line. Methods and ResultsContact force parameters and FTI during anatomical ipsilateral PV isolation for atrial fibrillation and atrial wall thickness were assessed retrospectively in 59 consecutive patients for their first PV isolation procedure. The PV antrum was divided into 8 segments, and the wall thickness of each segment under the ablation line was determined using multidetector computed tomography. The FTI for each ablation point was divided by the wall thickness of the PV antrum segment where each point was located to obtain FTI/wall thickness. In total, 5335 radiofrequency applications were delivered, and 85 gaps in PV isolation ablation lines and 15 dormant conductions induced by adenosine were detected. The gaps or dormant conductions were significantly associated with low contact force, radiofrequency duration, FTI, and FTI/wall thickness. Among them, FTI/wall thickness had the best prediction value for gaps or dormant conductions by receiver operating characteristic curve analysis. FTI/wall thickness of

The presence of a low-voltage areas (LVAs) is a major feature of the progression of atrial fibrillation. Typically, the LVA is determined by invasive left atrial voltage mapping. In addition to pulmonary vein electrical isolation, Voltage-guided substrate modification by targeting LVAs in addition to PVI has been shown to be superior to conventional PVI "only" approaches regarding freedom from AF recurrences after ablation. Recent studies have found Atrial wall thickness correlates with low voltage areas, and the degree of atrial myocardial fibrosis can be better assessed by CT or MRI in combination with voltage mapping, which might help reduce the recurrence of AF after catheter ablation., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Liu, Li and Han.)

Aims: To determine if adapting the ablation index (AI) to the left atrial wall thickness (LAWT), which is a determinant of lesion transmurality, is feasible, effective, and safe during paroxysmal atrial fibrillation (PAF) ablation., Methods and Results: Consecutive patients referred for PAF first ablation. Left atrial wall thickness three-dimensional maps were obtained from multidetector computed tomography and integrated into the CARTO navigation system. Left atrial wall thickness was categorized into 1 mm layers and AI was titrated to the LAWT. The ablation line was personalized to avoid thicker regions. Primary endpoints were acute efficacy and safety, and freedom from atrial fibrillation (AF) recurrences. Follow-up (FU) was scheduled at 1, 3, 6, and every 6 months thereafter. Ninety patients [60 (67%) male, age 58 ± 13 years] were included. Mean LAWT was 1.25 ± 0.62 mm. Mean AI was 366 ± 26 on the right pulmonary veins with a first-pass isolation in 84 (93%) patients and 380 ± 42 on the left pulmonary veins with first-pass in 87 (97%). Procedure time was 59 min (49-66); radiofrequency (RF) time 14 min (12.5-16); and fluoroscopy time 0.7 min (0.5-1.4). No major complication occurred. Eighty-four out of 90 (93.3%) patients were free of recurrence after a mean FU of 16 ± 4 months., Conclusion: Personalized AF ablation, adapting the AI to LAWT allowed pulmonary vein isolation with low RF delivery, fluoroscopy, and procedure time while obtaining a high rate of first-pass isolation, in this patient population. Freedom from AF recurrences was as high as in more demanding ablation protocols. A multicentre trial is ongoing to evaluate reproducibility of these results., (Published on behalf of the European Society of Cardiology. All rights reserved. © The Author(s) 2021. For permissions, please email: journals.permissions@oup.com.)

Atrial fibrillation (AF) is the most prevalent form of cardiac arrhythmia. The atrial wall thickness (AWT) can potentially improve our understanding of the mechanism underlying atrial structure that drives AF and provides important clinical information. However, most existing studies for estimating AWT rely on ruler-based measurements performed on only a few selected locations in 2D or 3D using digital calipers. Only a few studies have developed automatic approaches to estimate the AWT in the left atrium, and there are currently no methods to robustly estimate the AWT of both atrial chambers. Therefore, we have developed a computational pipeline to automatically calculate the 3D AWT across bi-atrial chambers and extensively validated our pipeline on both ex vivo and in vivo human atria data. The atrial geometry was first obtained by segmenting the atrial wall from the MRIs using a novel machine learning approach. The epicardial and endocardial surfaces were then separated using a multi-planar convex hull approach to define boundary conditions, from which, a Laplace equation was solved numerically to automatically separate bi-atrial chambers. To robustly estimate the AWT in each atrial chamber, coupled partial differential equations by coupling the Laplace solution with two surface trajectory functions were formulated and solved. Our pipeline enabled the reconstruction and visualization of the 3D AWT for bi-atrial chambers with a relative error of 8% and outperformed existing algorithms by >7%. Our approach can potentially lead to improved clinical diagnosis, patient stratification, and clinical guidance during ablation treatment for patients with AF., (Copyright © 2019. Published by Elsevier Ltd.)

Background: Low contact force and force-time integral (FTI) during catheter ablation are associated with ineffective lesion formation, whereas excessively high contact force and FTI may increase the risk of complications. We sought to evaluate the optimal FTI for pulmonary vein (PV) isolation based on atrial wall thickness under the ablation line., Methods and Results: Contact force parameters and FTI during anatomical ipsilateral PV isolation for atrial fibrillation and atrial wall thickness were assessed retrospectively in 59 consecutive patients for their first PV isolation procedure. The PV antrum was divided into 8 segments, and the wall thickness of each segment under the ablation line was determined using multidetector computed tomography. The FTI for each ablation point was divided by the wall thickness of the PV antrum segment where each point was located to obtain FTI/wall thickness. In total, 5335 radiofrequency applications were delivered, and 85 gaps in PV isolation ablation lines and 15 dormant conductions induced by adenosine were detected. The gaps or dormant conductions were significantly associated with low contact force, radiofrequency duration, FTI, and FTI/wall thickness. Among them, FTI/wall thickness had the best prediction value for gaps or dormant conductions by receiver operating characteristic curve analysis. FTI/wall thickness of <76.4 gram-seconds per millimeter (gs/mm) predicted gaps or dormant conductions with sensitivity (88.0%) and specificity (83.6%), and FTI/wall thickness of <101.1 gs/mm was highly predictive (sensitivity 97.0%; specificity 69.6%)., Conclusions: FTI/wall thickness is a strong predictor of gap and dormant conduction formation in PV isolation. An FTI/wall thickness ≈100 gs/mm could be a suitable target for effective ablation., (© 2016 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.)