Search

Chemical risk assessment for avian species typically depends on information from toxicity tests performed in adult birds. Early‐life stage (ELS) toxicity tests have been proposed as an alternative, but incorporation of these data into existing frameworks will require knowledge about the similarities/differences between ELS and adult responses. The present study uses transcriptomics to assess hepatic gene expression in ELS and adult Japanese quail following exposure to ethinylestradiol (EE2). Prior to incubation, ELS quail were dosed with measured EE2 concentrations of 0.54, 6.3, and 54.2 µg/g egg weight via air cell injection. Adult quail were fed a single dose of EE2 at nominal concentrations of 0, 0.5, and 5 mg/kg body weight by gavage. Liver tissue was collected from five to six individuals per dose group at mid‐incubation for ELS quail and 4 days after dosing for adults. A total of 283 and 111 differentially expressed genes (DEGs) were detected in ELS and adult quail, respectively, 16 of which were shared across life stages. Shared DEGs included estrogenic biomarkers such as vitellogenin genes and apovitellenin‐1. For the dose groups that resulted in the highest number of DEGs (ELS, 6.3 µg/g; adult, 5 mg/kg), 21 and 35 Kyoto Encyclopedia of Genes and Genomes pathways were enriched, respectively. Ten of these pathways were shared between life stages, including pathways involved with signaling molecules and interaction and the endocrine system. Taken together, our results suggest conserved mechanisms of action following estrogenic exposure across two life stages, with evidence from differential expression of key biomarker genes and enriched pathways. The present study contributes to the development and evaluation of ELS tests and toxicogenomic approaches and highlights their combined potential for screening estrogenic chemicals. Environ Toxicol Chem 2022;41:2769–2781. © 2022 SETAC [ABSTRACT FROM AUTHOR]

Featured Application: There is a need to improve the sophistication of in vitro models for safety testing in the drug discovery pipeline. There is momentum in biomedical research to improve the structure and function of in vitro intestinal models that better represent human biology. To build a more comprehensive model, three human cell-types were co-cultured and characterized: i.e., HT29-MTX (intestinal mucous-producing goblet cells), Caco-2 (colon epithelial cells), and Raji B (lymphocytes). Raji B cells transformed a subpopulation of Caco-2 epithelial cells into phagocytic and transcytotic immune-supporting microfold cells (M-cells). A suite of bioassays was implemented to investigate steady-state barrier integrity and cellular communication. The model demonstrated a potentiating effect in metabolism and pro-inflammatory markers. Barrier integrity and cell seeding density seem to play a role in the reliability of endpoint readouts. Microscopic analysis elucidated the importance of multi-cell biomimicry. The data show that monocultures do not have the same characteristics inherent to triple cell culture models. Multiple cell types in an in vitro model produce a better representation of an intact organ and aid in the ability to assess immunomodulatory effects of nanomaterials designed for cancer theranostics after ingestion. As many national and international agencies have stressed, there is a critical need to improve alternative-to-animal strategies for pharmaceuticals in an effort to reduce animal testing. [ABSTRACT FROM AUTHOR]

Cellulose nanocrystals (CNCs) are a next-generation cellulose product with many unique properties including applications in the food industry as a food additive, food coating, and in food-contact packaging material. While CNC is anticipated to be safe due to its similarity to the many forms of cellulose currently used as food additives, special consideration is given to it as it is the first manufactured form of cellulose that is nanoscale in both length and width. A proactive approach to safety has been adopted by manufacturers to demonstrate CNC safety toward responsible commercialization. As part of the safety demonstration, in vivo and in vitro testing strategies were commissioned side-by-side with conventional cellulose, which has been safely used in food for decades. Testing included a 90-day rodent feeding study as well as additional physical, chemical, and biological studies in vitro that follow European Food Safety Authority (EFSA) guidance to demonstrate the safe use of novel food ingredients. The strategy includes assessment of neat materials side-by-side with simulated digestion, mimicking conditions that occur along the gastrointestinal tract as well as intracellularly. An intestinal co-culture model examined any potential toxicological effects from exposure to either pristine or digested forms of CNC including cytotoxicity, metabolic activity, membrane permeability, oxidative stress, and proinflammatory responses. None of the studies demonstrated any toxicity via oral or simulated oral exposure. These studies demonstrate that CNC produced by InnoTech Alberta is similarly safe by ingestion as conventional cellulose with a no-observed-adverse-effect level of 2085.3 (males) and 2682.8 (females) mg/kg/day. [ABSTRACT FROM AUTHOR]

Aim: Design nanostructured lipid carriers (NLC) to facilitate drug delivery to tuberculosis-infected areas, exploiting macrophage mannose receptors and assess their uptake in a 3D human lung model. Materials & methods: NLCs and mannosylated-NLCs were synthetized and characterized. Their uptake and biocompatibility were tested in a 3D human lung model. Results: The formulations have appropriate size (170–202 nm) and morphology for lung deposition. Cell membrane integrity was maintained and no significant pro-inflammatory cytokine (IL-1β, IL-8 and TNF-α) secretion or morphological changes were observed 24 h post nanoparticles exposure. NLCs and mannosylated NLCs were distributed in the apical side of the lung tissue, both in macrophages and in epithelial cells. Conclusion: NLCs are biocompatible carriers and can be used for pulmonary drug delivery. [ABSTRACT FROM AUTHOR]

Early–life stage (ELS) toxicity tests are recognized as an advancement over current testing methodologies in terms of cost, animal use, and biological relevance. However, standardized ELS tests are not presently available for some vertebrate taxa, including birds. The present study describes a Japanese quail (Coturnix japonica) ELS test that is a promising candidate for standardization and applies it to test 8 environmental chemicals (ethinylestradiol, benzo[a]pyrene, chlorpyrifos, fluoxetine, lead(II)nitrate, trenbolone, seleno‐L‐methionine, hexabromocyclododecane). Individual chemicals were injected into the air cell of unincubated Japanese quail eggs at 3 concentrations, all predicted to cause ≤20% mortality. Survival to embryonic day 16 was consistently high (>90%) among the vehicle‐injected controls. All chemicals, except ethinylestradiol, were detected in liver tissue, most at concentrations suggestive of embryonic clearance. Adverse effects were observed for 5 of the 8 chemicals; chlorpyrifos (41.1 µg/g) significantly increased developmental abnormalities and decreased embryo and gallbladder mass. Ethinylestradiol (54.2 µg/g) and hexabromocyclododecane (0.02 µg/g) decreased embryo mass and tarsus length, respectively. Benzo[a]pyrene (0.83 µg/g) and fluoxetine hydrochloride (32.7 µg/g) exceeded the 20% mortality cutoff. No effects were observed following lead(II)nitrate, seleno‐L‐methionine, or trenbolone exposure up to 10.7, 0.07, and 4.4 µg/g, respectively. Overall, our ELS approach was time‐ and cost‐effective, caused minimal mortality in controls, effectively delivered diverse chemicals to the embryo, and permitted identification of apical outcomes, all of which provide support toward standardization. Environ Toxicol Chem 2019;39:141–154. © 2019 SETAC [ABSTRACT FROM AUTHOR]

The development of alternative testing strategies (ATS) for hazard assessment of new and emerging materials is high on the agenda of scientists, funders, and regulators. The relatively large number of nanomaterials on the market and under development means that an increasing emphasis will be placed on the use of reliable, predictive ATS when assessing their safety. We have provided recommendations as to how ATS development for assessment of nanomaterial hazard may be accelerated. Predefined search terms were used to identify the quantity and distribution of peer-reviewed publications for nanomaterial hazard assessment following inhalation, ingestion, or dermal absorption. A summary of knowledge gaps relating to nanomaterial hazard is provided to identify future research priorities and areas in which a rich data set might exist to allow ATS identification. Consultation with stakeholders (e.g., academia, industry, regulators) was critical to ensure that current expert opinion was reflected. The gap analysis revealed an abundance of studies that assessed the local and systemic impacts of inhaled particles, and so ATS are available for immediate use. Development of ATS for assessment of the dermal toxicity of chemicals is already relatively advanced, and these models should be applied to nanomaterials as relatively few studies have assessed the dermal toxicity of nanomaterials to date. Limited studies have investigated the local and systemic impacts of ingested nanomaterials. If the recommendations for research prioritization proposed are adopted, it is envisioned that a comprehensive battery of ATS can be developed to support the risk assessment process for nanomaterials. Some alternative models are available for immediate implementation, while others require more developmental work to become widely adopted. Case studies are included that can be used to inform the selection of alternative models and end points when assessing the pathogenicity of fibers and mode of action of nanomaterial toxicity. [ABSTRACT FROM AUTHOR]

Carbon nanotubes (CNTs) represent one of the most promising engineered nanomaterials, with possible applications in advanced engineering and biomedical technologies. During their production, human exposure to CNTs may occurviainhalation. Therefore, the aim of this study was to mimic inhalation of multi-walled CNTs (MWCNTs)in vitroas realistically as possible, by producing MWCNTs aerosolsviaan Air–Liquid Interface Cell Exposure System (ALICE), combined with a 3D epithelial airway barrier model cultivated at the air–liquid interface (ALI). To address the consequences of an extended exposure period, repeated exposures of MWCNTs (total deposition 1.15 μg/cm2) were applied to the co-culture system, either over one day (one day repeated exposure) or three days (three day repeated exposure scenario). Although in both repeated exposure scenarios MWCNTs were found to interact with the different cell types, they did not induce any cytotoxicity or alterations in cell morphology, nor did they elucidate any significant increase in pro-inflammatory markers compared to control cultures. Similar results were also observed following single MWCNTs exposures at deposited concentrations of 0.14, 0.20 and 0.39 µg/cm2. Cells exposed repeatedly to MWCNTs for three days, however did show a decrease in reduced glutathione levels, although not significant (p > 0.05). In conclusion, we have presented a realisticin vitroalternative to mimic occupational exposure of MWCNTs and by applying this approach it was shown that repeated MWCNT exposures to lung cell cultures at the ALI elicit a limited biological impact over a three day period. [ABSTRACT FROM PUBLISHER]

To identify a cost-efficient alternative antibody testing strategy for screening and confirmation of HIV infection by rapid simple tests (RSTs) and enzyme-linked immunosorbent assays (ELISAs). Methods Four RSTs (RST1, RST2, RST3, and RST4 ) and five ELISAs (ELISA1, ELISA2, ELISA3, ELISA4, and ELISA5) were evaluated in two phases by using banked and serum specimens prospectively collected at regional hospitals and voluntary counseling and testing (VCT) centers in Beijing. A total of 200 banked serum specimens were included in the first phase, including 62 HIV-positive, 127 HIV-negative and 11 indeterminate specimens. All specimens were tested by four RSTs and five ELISAs respectively. The second phase involved prospective testing of 389 routine specimens, including 92 HIV-positive, 287 HIV-negative, and 10 indeterminate specimens. All the specimens were tested by two RSTs (RST2 and RST4) and three ELISAs (ELISA1, ELISA3, and ELISA4), which were selected for their respective excellent sensitivity and/or specificity. Western blot (WB) was used as a gold standard for confirming the reactivity of all the specimens. Results Sensitivity, specificity, and efficacy were calculated for each assay in two phases. In the first phase, four assays (ELISA4, RST2, RST3, and RST4) had a specificity of 100%. For the determination of efficacy, ELISA4, RST2, and RST4 were selected in the second phase. ELISA1 and ELISA3 which have a sensitivity of 95.9% and 93.2% respectively also entered this phase. In the second phase, all the five assays (ELISA1, ELISA3, ELISA4, RST2, and RST4) had a sensitivity and specifity of over 90%. ELISA1 had a sensitivity of 99% and ELISA4 a specificity of 99%. Conclusion The sensitivity ELISA1 and the specificit of ELISA4 are comparable to ELISA/WB standard strategy. Application of this alternative testing strategy provides a cost-effective method for determining HIV prevalence in Beijing. [ABSTRACT FROM AUTHOR]

The potential developmental toxicity and mode-of-action of fume condensate extracts of bitumen and oxidized asphalt were evaluated in the aryl hydrocarbon receptor (AhR) CALUX assay, the zebrafish embryotoxicity test (ZET), and the mouse embryonic stem cell test (mEST). In the AhR CALUX assay, both fume condensate extracts showed a concentration-dependent AhR induction following 6-h of exposure, but this activity was substantially reduced after 24-h, indicating a transient AhR activation. The main effect observed in the ZET was early embryonic lethality that occurred mostly in the 24 h-post-fertilization (hpf). This typically reflects non-specific toxicity rather than in vitro developmental toxicity of the fume condensate extracts tested since this effect was not seen as a result of the whole cumulative exposure period in the ZET (up to 96 hpf). No malformations were seen in any zebrafish embryo exposed to these fume condensate extracts, although some developed pericardial and/or yolk-sac edemas. Furthermore, both fume condensate extracts tested negative in the mEST. In conclusion, the results show that fume condensate extracts of bitumen and oxidized asphalt do not induce any in vitro developmental toxicity, which is in line with the results observed in the in vivo prenatal developmental toxicity studies performed with the same materials., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Nanotechnology has rapidly promoted the development of a new generation of industrial and commercial products; however, it has also raised some concerns about human health and safety. To evaluate the toxicity of the great diversity of nanomaterials (NMs) in the traditional manner, a tremendous number of safety assessments and a very large number of animals would be required. For this reason, it is necessary to consider the use of alternative testing strategies or methods that reduce, refine, or replace (3Rs) the use of animals for assessing the toxicity of NMs. Autophagy is considered an early indicator of NM interactions with cells and has been recently recognized as an important form of cell death in nanoparticle-induced toxicity. Impairment of autophagy is related to the accelerated pathogenesis of diseases. By using mechanism-based high-throughput screening in vitro, we can predict the NMs that may lead to the generation of disease outcomes in vivo. Thus, a tiered testing strategy is suggested that includes a set of standardized assays in relevant human cell lines followed by critical validation studies carried out in animals or whole organism models such as C. elegans (Caenorhabditis elegans), zebrafish (Danio rerio), and Drosophila (Drosophila melanogaster)for improved screening of NM safety. A thorough understanding of the mechanisms by which NMs perturb biological systems, including autophagy induction, is critical for a more comprehensive elucidation of nanotoxicity. A more profound understanding of toxicity mechanisms will also facilitate the development of prevention and intervention policies against adverse outcomes induced by NMs. The development of a tiered testing strategy for NM hazard assessment not only promotes a more widespread adoption of non-rodent or 3R principles but also makes nanotoxicology testing more ethical, relevant, and cost- and time-efficient. [ABSTRACT FROM AUTHOR]

Cellulose nanocrystals (CNCs) are a next-generation cellulose product with many unique properties including applications in the food industry as a food additive, food coating, and in food-contact packaging material. While CNC is anticipated to be safe due to its similarity to the many forms of cellulose currently used as food additives, special consideration is given to it as it is the first manufactured form of cellulose that is nanoscale in both length and width. A proactive approach to safety has been adopted by manufacturers to demonstrate CNC safety toward responsible commercialization. As part of the safety demonstration, in vivo and in vitro testing strategies were commissioned side-by-side with conventional cellulose, which has been safely used in food for decades. Testing included a 90-day rodent feeding study as well as additional physical, chemical, and biological studies in vitro that follow European Food Safety Authority (EFSA) guidance to demonstrate the safe use of novel food ingredients. The strategy includes assessment of neat materials side-by-side with simulated digestion, mimicking conditions that occur along the gastrointestinal tract as well as intracellularly. An intestinal co-culture model examined any potential toxicological effects from exposure to either pristine or digested forms of CNC including cytotoxicity, metabolic activity, membrane permeability, oxidative stress, and proinflammatory responses. None of the studies demonstrated any toxicity via oral or simulated oral exposure. These studies demonstrate that CNC produced by InnoTech Alberta is similarly safe by ingestion as conventional cellulose with a no-observed-adverse-effect level of 2085.3 (males) and 2682.8 (females) mg/kg/day., (© The Author(s) 2020. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

The development of alternative testing strategies (ATS) for hazard assessment of new and emerging materials is high on the agenda of scientists, funders, and regulators. The relatively large number of nanomaterials on the market and under development means that an increasing emphasis will be placed on the use of reliable, predictive ATS when assessing their safety. We have provided recommendations as to how ATS development for assessment of nanomaterial hazard may be accelerated. Predefined search terms were used to identify the quantity and distribution of peer-reviewed publications for nanomaterial hazard assessment following inhalation, ingestion, or dermal absorption. A summary of knowledge gaps relating to nanomaterial hazard is provided to identify future research priorities and areas in which a rich data set might exist to allow ATS identification. Consultation with stakeholders (e.g., academia, industry, regulators) was critical to ensure that current expert opinion was reflected. The gap analysis revealed an abundance of studies that assessed the local and systemic impacts of inhaled particles, and so ATS are available for immediate use. Development of ATS for assessment of the dermal toxicity of chemicals is already relatively advanced, and these models should be applied to nanomaterials as relatively few studies have assessed the dermal toxicity of nanomaterials to date. Limited studies have investigated the local and systemic impacts of ingested nanomaterials. If the recommendations for research prioritization proposed are adopted, it is envisioned that a comprehensive battery of ATS can be developed to support the risk assessment process for nanomaterials. Some alternative models are available for immediate implementation, while others require more developmental work to become widely adopted. Case studies are included that can be used to inform the selection of alternative models and end points when assessing the pathogenicity of fibers and mode of action of nanomaterial toxicity., (© 2016 Society for Risk Analysis.)