Search

Purpose: To compare the color dimensions, color discrepancies (ΔE00), and surface roughness of milled materials before and after application of a bleaching agent., Materials and Methods: A total of 10 extracted molars were obtained. Each tooth was cut in transverse sections to create disks (3-mm thick, 10-mm diameter; control group). Disk specimens of eight materials (n &#61; 10 per group) were fabricated: polymethyl methacrylate (PMMA) interim material (PMMA-Telio group), two resin nanoceramics (RNC-Ultimate group and RNC-Cerasmart group), two hybrid ceramics (HC-Shofu group and HC-Enamic group), lithium disilicate (LD-Emax group), zirconia-reinforced glass ceramic (ZGC-Suprinity group), and zirconia (Zr-InCeram group). Color measurements were obtained using a spectrophotometer before and after applying 35% hydrogen peroxide-based bleaching agent. Pre- and postbleaching surface roughness (Sa) analyses were completed using a profilometer., Results: Significant L*, a*, b*, and ΔE00 value differences were found (P < .05). Color discrepancies (ΔE00) ranged from 0.30 ± 0.14 to 4.82 ± 0.10. The highest color discrepancies were measured on the PMMA-Telio group, while the lowest color discrepancies were computed for ZGC-Suprinity, RNCUltimate, and RNC-Cerasmart. Significant surface roughness differences were found (P < .05). The largest increase of surface roughness values between the pre- and postbleaching measurements was obtained in the PMMA-Telio group with a mean ΔSa value of 4.73 ± 3.02, while the largest decrease of surface roughness values between the pre- and postbleaching measurements was obtained in the Zr-InCeram group with a mean ΔSa value of -1.58 ± 0.10., Conclusions: The milled materials showed significant pre- and postbleaching color and surface roughness discrepancies.

Background: This study aimed to characterize dentistry, medicine and pharmacy students in terms of emotional intelligence (EI) and personality traits (PTs). It also sought to identify whether differences existed according to gender and degree program and the relationship between them., Methods: Students enrolled in dentistry (115), medicine (85) and pharmacy (57) degree programs participated voluntarily in the research, including 59 men and 198 women. The following questionnaires were used: (1) the Trait Meta-Mood Scale (TMMS-24) to evaluate EI; (2) the NEO Five-Factor Inventory (NEO-FFI) to assess PT. The Qualtrics XM platform was used for data collection., Results: There were no statistically significant differences between three components of EI, either according to gender or degree program. The only difference in PTs was found in neuroticism, where women scored higher than men. There were statistically significant differences between students on different degree programs in openness to experience and responsibility. The five PTs correlated significantly with the three components of EI, except responsibility and emotional attention. The strongest associations were found between neuroticism and emotional repair (-0.439)., Conclusions: High percentages of the student population were observed to have weaknesses in emotional clarity and emotional repair. Neuroticism is a personality trait that seems to occur more frequently in women.

The aim of this systematic review and meta-analysis was to analyze whether or not mandibular advancement devices (MADs) produce changes in blood pressure in patients with obstructive sleep apnea (OSA) in relation to use time and if the device is used at night or day., Materials and Method: A systematic review of the literature and meta-analysis was carried out in accordance with PRISMA guidelines. In the bibliographic search, a total of four databases were consulted: PubMed-Medline, Scopus, Web of Science, and Cochrane. Of the 622 articles initially revealed, 160 duplicates were eliminated. After applying the selection criteria, 17 articles were included for the qualitative analysis and 4 for the meta-analysis. The studies were combined using a random effects model with the inverse method of variance, determining the mean differences in systolic and diastolic pressure before and after treatment using the MAD splint as the effect size. Day/night circadian effect and treatment time were analyzed using meta-regression with a mixed-effects model., Results: MAD treatment was not found to affect diastolic pressure. By combining the four studies with the control group in a meta-analysis (I 2  = 75%; z =  - 0.15; p-value = 0.882), the mean difference in diastolic pressure between the MAD group and the control group was estimated at - 0.06 (- 0.86; 0.74). The meta-regression also showed no significant effect of day/night (p = 0.560) or treatment time (p = 0.854) on diastolic pressure. When combining the four studies with the control group (I 2  = 84%%; z =  - 1.47; p-value = 0.142), a non-significant mean difference in systolic pressure between the MAD group and the control group of - 0.99 (- 2.31; 0.33) was estimated in the meta-analysis. However, when assessing the effect of day/night or treatment time on systolic blood pressure using a meta-regression, the latter showed significant covariates that reduce systolic blood pressure values in the model at night (p < 0.001) and in relation to treatment time (p < 0.001)., Conclusions: Only systolic pressure appears to be affected by the use of the MAD in patients with OSA, and this decrease in systolic pressure is greater at night and when treatment time is longer., (© 2024. The Author(s).)

Background: The objective of the present study was to evaluate the reliability of an augmented reality drilling approach and a freehand drilling technique for the autotransplantation of single-rooted teeth., Materials and Methods: Forty samples were assigned to the following surgical techniques for drilling guidance of the artificial sockets: A. augmented reality technique (AR) (n = 20) and B. conventional free-hand technique (FT) (n = 20). Then, two models with 10 teeth each were submitted to a preoperative cone-beam computed tomography (CBCT) scan and a digital impression by a 3D intraoral scan. Afterwards, the autotrasplanted teeth were planned in a 3D dental implant planning software and transferred to the augmented reality device. Then, a postoperative CBCT scan was performed. Data sets from postoperative CBCT scans were aligned to the planning in the 3D implant planning software to analize the coronal, apical and angular deviations. Student's t-test and Mann-Whitney non-parametric statistical analysis were used to analyze the results., Results: No statistically significant differences were shown at coronal (p = 0.123) and angular (p = 0.340) level; however, apical deviations between AR and FT study groups (p = 0.008) were statistically significant different., Conclusion: The augmented reality appliance provides higher accuracy in the positioning of single-root autotransplanted teeth compared to the conventional free-hand technique., (© 2024. The Author(s).)

Introduction: There is evidence that the apico-coronal implant position and the mucosal phenotype can affect the extent of peri-implant bone loss. This clinical trial analyzes the bone remodeling and marginal bone loss that occur around conical-connection implants placed equicrestally and subcrestally, assessing the effect of the peri-implant soft-tissue phenotype., Methods: Fifty-one patients received 56 implants of distinct diameters (3.5 mm Ø n = 6; 4.3 mm Ø n = 41; 5 mm Ø n = 9) in the posterior part of the maxilla or mandible. The implants were placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, depending on the initial supracrestal tissue height (STH). After 3 months of non-submerged healing, single metal-ceramic screw-retained implant-supported crowns were placed. Longitudinal measurements of STH, mucosal thickness and keratinized mucosa width (KMW) were made at the time of implant placement (T0), crown placement (T1), and after 3 (T2) and 6 months (T3) of prosthetic loading. At each of these points, a radiographic evaluation of bone remodeling and marginal bone loss was also performed., Results: STH was significantly greater for implants placed >1 mm subcrestally than for those placed 1 mm subcrestally. After 12 months of follow-up, a very significant (p < 0.001) loss of KMW was observed, in addition to a marginal bone loss of 0.08 ± 0.1, 0.15 ± 0.2, and 0.14 ± 0.2 mm in the groups placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, respectively. After the multiple linear regression, marginal bone loss was found to depend primarily on KMW (β = -0.43), while also being affected by STH (β = 0.32) and implant diameter (β = -0.28)., Conclusions: Marginal bone loss may be influenced by the position with respect to the bone crest, as well as the KMW, STH, and implant diameter. However, more well-controlled studies are needed to verify these above-mentioned findings with different implant designs and connections., (© 2024 The Authors. Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

The aim of this study was to describe a novel digital technique to analyze the wear of screw-retained implant-supported metal-ceramic dental prostheses and natural tooth as antagonist.Materials and methods Ten patients were consecutively included to rehabilitate partial edentulism by dental implants. Both the screw-retained implant-supported metal-ceramic dental prostheses and the natural tooth as antagonist were submitted to a digital impression through an intraoral scan to generate a Standard Tessellation Language digital file preoperatively (STL1), at 3 months (STL2), and 6 months (STL3) follow-up. Afterwards, an alignment procedure of the digital files (STL1-STL3) was performed on a reverse engineering morphometric software (3D Geomagic Capture Wrap) and volume changes at the screw-retained implant-supported metal-ceramic dental prostheses and the natural tooth as antagonist were analyzed using Student's t-test. Moreover, Gage R&R statistical analysis was conducted to analyze the repeatability and reproducibility of the digital technique.Results Gage R&R showed a variability attributable to the digital technique of 3.8% (among the measures of each operator) and 4.5% (among operators) of the total variability; resulting repeatable and reproducible, since the variabilities were under 10%. In addition, statistically significant differences were shown at the wear volume (μm 3 ) of both the natural tooth as antagonist (p < 0.0001) and the screw-retained implant-supported metal-ceramic dental prostheses between 3- and 6-months follow-up (p = 0.0002).Conclusion The novel digital measurement technique results repeatable and reproducible to analyze the wear of screw-retained implant-supported metal-ceramic dental prostheses and natural tooth as antagonist., (© 2024. The Author(s).)

The aim of this study was to analyze and compare the accuracy of a novel interproximal enamel reduction (IPR) technique based on a computer-aided static navigation technique with respect to a conventional free-hand-based technique for interproximal enamel reduction. Twenty anatomical-based experimental cast models of polyurethane were randomly distributed into the following IPR techniques: IPR technique based on computer-aided static navigation technique ( n = 10) (GI) for Group A and conventional free-hand-based technique for the IPR ( n = 10) (FHT) for Group B. The anatomical-based experimental cast models of polyurethane randomly assigned to the GI study group were submitted for a preoperative 3D intraoral surface scan; then, datasets were uploaded into 3D implant-planning software to design virtual templates for the interproximal enamel reduction technique. Afterward, the anatomical-based experimental cast models of polyurethane of both GI and FHT study groups were subjected to a postoperative digital impression by a 3D intraoral surface scan to compare the accuracy of the interproximal enamel reduction techniques at the buccal (mm), lingual/palatal (mm), and angular (◦) levels using the Student t -test. Statistically significant differences between the interproximal enamel reduction technique based on the computer-aided static navigation technique and the conventional free-hand-based technique for the interproximal enamel reduction at the buccal ( p = 0.0008) and lingual/palatal ( p < 0.0001) levels; however, no statistically significant differences were shown at the angular level ( p = 0.1042). The interproximal enamel reduction technique based on computer-aided static navigation technique was more accurate than the conventional free-hand-based technique for interproximal enamel reduction.

The aim of the present study was to analyze and compare the angle deviation of two, four and six adjacent dental implants placed with and without straight parallel pins., Materials and Methods: Two hundred and forty (240) dental implants were selected and randomly allocated into the following study groups: Two dental implants placed with straight parallel pins (Ref.: 144-100, BioHorizons, Birmingham, AL, USA) (n = 10) (2PP); Two dental implants placed without parallel pins (n = 10) (2withoutPP); Four dental implants placed with straight parallel pins hT(n = 10) (4PP); Four dental implants placed without parallel pins (n = 10) (4withoutPP); Six dental implants placed with straight parallel pins (n = 10) (6PP) and Six dental implants placed without parallel pins (n = 10) (6withoutPP). The dental implants randomly assigned to groups 2PP and 2withoutPP were placed into standardized polyurethane models of partially edentulous upper jaws in tooth positions 2.4 and 2.6, the dental implants randomly assigned to groups 4PP and 4withoutPP were placed into standardized polyurethane models of fully edentulous upper jaws in tooth positions 1.6, 1.4, 2.4 and 2.6, and the dental implants randomly assigned to groups 6PP and 6withoutPP were placed into standardized polyurethane models of fully edentulous upper jaws in tooth positions 1.6, 1.4, 1.2, 2.2, 2.4 and 2.6. Afterwards, postoperative CBCT scans and digital impressions were aligned in a 3D implant-planning software to compare the angle deviation (°) of two, four and six adjacent dental implants placed with and without straight parallel pins using the General Linear Model statistical analysis., Results: Statistically significant differences were found between the angle deviation of 2 dental implants placed with straight parallel pins (p < 0.0001) and between the angle deviation of 4 dental implants placed with straight parallel pins (p = 0.0024); however, no statistically significant differences were found in the angle deviation of 6 dental implants placed with straight parallel pins (p = 0.9967)., Conclusion: The use of a straight parallelization pin results in lower angle deviation between two and four adjacent dental implants; however, it is not effective for a larger number of dental implants., (© 2024. The Author(s).)

This study seeks to assess the accuracy of apical location using an augmented reality (AR) device with a free-hand method. Sixty (60) osteotomy site preparations were randomly assigned to one of two study groups: A. AR device (AR) ( n = 30), and B. conventional free-hand method (FHM) ( n = 30). Preoperative CBCT scans and intraoral scans were taken and uploaded to specialized implant-planning software to virtually plan preparations for the apical location osteotomy sites. The planning software was then used to automatically segment the teeth in each experimental model for their complete visualization using the AR device. A CBCT scan was carried out postoperatively after conducting the apical location procedures. The subsequent datasets were imported into therapeutic software to analyze the coronal, apical, and angular deviations. The Mann-Whitney non-parametric test was used. There were no statistically significant differences identified at the coronal ( p = 0.1335), apical ( p = 0.2401), and angular deviations ( p = 0.4849) between the AR and FHM study groups. The augmented reality technique did not show a statistically significant accuracy of osteotomies for apical location when compared with the conventional free-hand method.

The aim of this work was to analyze and compare the tooth structure removal between a free-hand preparation technique and a computer-aided preparation technique using an augmented reality appliance for complete-crowns preparation designs and "root mean square" (RMS) alignment value. Ten upper teeth representatives of all dental sectors were selected from a generic model library as "Standard Tessellation Language" (STL-1) digital files and 3D-printed in an anatomically based acrylic resin experimental model. Then these were randomly assigned to the following tooth preparation techniques: Group A: free-hand preparation technique ( n = 5) (FHT) and Group B: computer-aided preparation technique using an augmented reality appliance ( n = 5) (AR). Experimental models were submitted to a digital impression through an intraoral scan and (STL-2) uploaded into a reverse engineering morphometric software to measure the volumetric reduction in the planned and performed tooth structure (mm 3 ) and RMS using the Student's t -test and the Mann-Whitney non-parametric test. Statistically significant differences were observed between the volumetric reduction in the planned and performed tooth structure (mm 3 ) of the AR and FHT study groups ( p = 0.0001). Moreover, statistically significant differences were observed between the RMS of the planned and performed tooth preparations in both the AR and FHT study groups ( p = 0.0005). The augmented reality appliance provides a more conservative and predictable complete-crowns preparation design than the free-hand preparation technique.

Statement of Problem: The extraction of fractured abutment screws can be a difficult challenge to overcome., Purpose: To compare the removal capacity, dental implant connection damage, and time required to remove the fractured abutment screws between three drilling techniques and a conventional method., Materials and Methods: A total of 180 prefabricated screw-retained abutments were intentionally fractured in internal connection dental implants after being subjected to a cyclic load and a static compression load. Afterwards, three operators randomly removed the fractured abutment screws with the following drilling techniques and a conventional method: A: a conventional technique using an exploration probe and ultrasonic appliance (n = 45), Rhein83 ® (n = 45); B: Sanhigia ® (n = 45); C: Phibo ® (n = 45). Two-way ANOVA models were estimated to evaluate the mean time according to the method and operator used., Results: The probability of removal of the screws with mobility was twelve times higher than that of the screws without mobility (OR = 12.4; p < 0.001). The success rate according to the operators did not show statistically significant differences ( p = 0.371). The location of the fractured screw did not affect removal success ( p = 0.530). The internal thread of the implant was affected after the removal process in 9.8% of the cases. The mean extraction time was 3.17 ± 2.52 min. The Rhein83 ® method showed a success rate of 84.4%, followed by the Phibo ® and conventional methods (71.1%) and the Sanhigia ® method (46.7%)., Conclusions: The Rhein83 ® drilling technique increases the removal probability of fractured abutment screws. The initial mobility of the fragment is also a significant factor in the removal success.

The airway complex is modified by bimaxillary advancement surgery performed in patients suffering from obstructive sleep apnea (OSA). The aim of the present study is to analyse the volume of nasal and maxillary sinus after bimaxillary advancement surgery in patients suffering from OSA. The maxillary sinus and nasal complex of eighteen patients with OSA was measured through cone-beam computed tomography (CBCT) before and after they were treated with bimaxillary advancement surgery. Digital planning software was used to effectively measure the upper volume changes, as well as, statistical analysis of the results was performed.Methods Eighteen patients were diagnosed with OSA the severity of which was measured by the apnea hypopnea index and were selected and submitted to preoperative and postoperative CBCT scans. Afterwards, datasets were uploaded into therapeutic digital planning software (Dolphin Imaging) to measure the volume of the right and left maxillary sinus and nasal and maxillary sinus complex. Statistically analysis between preoperative and postoperative measures was performed by Student t-test statistical analysis.Results The paired t-test showed statistically significant volumetric reductions in the left maxillary sinus (p = 0.0004), right maxillary sinus (p < 0.0001) and nasal and maxillary sinus complex (p = 0.0009) after bimaxillary advancement surgery performed in patients suffering from OSA.Conclusion The results showed that bimaxillary advancement surgery reduces the maxillary sinus volume as well as, the fossa nasal and sinus complex volume., (© 2023. The Author(s).)

The aim of this systematic review and meta-analysis was to analyze the association between periodontal disease and prostate inflammation with a null hypothesis stating that periodontal disease does not increase the incidence of prostate inflammation., Materials and Methods: A systematic literature review and meta-analysis of longitudinal observational cohort and case-control studies that evaluated the odds ratio or hazard ratio and confidence interval was undertaken based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) recommendations (2020). A total of four databases were consulted in the literature search: PubMed-Medline, Scopus, Embase, and Web of Science. After eliminating duplicated articles and applying the inclusion criteria, seven articles were selected for the qualitative and quantitative analyses., Results: Four observational cohort studies and three observational cohort case-control studies were included in the meta-analysis. The four observational cohort studies were combined using the random effects model to estimate a hazard ratio of 1.32 with a confidence interval of 95% between 0.87 and 1.77. The meta-analysis presented high heterogeneity (Q test = 56.1; p value < 0.001; I 2 = 94.9%). Moreover, the three observational case-control studies were combined using the random effects model to estimate an odds ratio of 1.62 with a confidence interval of 95% between 1.41 and 1.84. The meta-analysis presented high heterogeneity (Q test = 1.07; p value = 0.782; I 2 = 0%)., Conclusions: The incidence of periodontal disease does not increase the risk of the incidence of prostate inflammation.

To analyze and compare the accuracy and root contact prevalence, comparing a conventional freehand technique and two navigation techniques based on augmented reality technology for the orthodontic self-drilling mini-implants placement. Methods Two hundred and seven orthodontic self-drilling mini-implants were placed using either a conventional freehand technique (FHT) and two navigation techniques based on augmented reality technology (AR TOOTH and AR SCREWS). Accuracy across different dental sectors was also analyzed. CBCT and intraoral scans were taken both prior to and following orthodontic self-drilling mini-implants placement. The deviation angle and horizontal were then analyzed; these measurements were taken at the coronal entry point and apical endpoint between the planned and performed orthodontic self-drilling mini-implants. In addition, any complications resulting from mini-implant placement, such as spot perforations, were also analyzed across all dental sectors.Results The statistical analysis showed significant differences between study groups with regard to the coronal entry-point (p < 0.001), apical end-point(p < 0.001) and angular deviations (p < 0.001). Furthermore, statistically significant differences were shown between the orthodontic self-drilling mini-implants placement site at the coronal entry-point (p < 0.0001) and apical end-point (p < 0.001). Additionally, eight root perforations were observed in the FHT group, while there were no root perforations in the two navigation techniques based on augmented reality technology.Conclusions The navigation techniques based on augmented reality technology has an effect on the accuracy of orthodontic self-drilling mini-implants placement and results in fewer intraoperative complications, comparing to the conventional free-hand technique. The AR TOOTH augmented reality technique showed more accurate results between planned and placed orthodontic self-drilling mini-implants, comparing to the AR SCREWS and conventional free-hand techniques. The navigation techniques based on augmented reality technology showed fewer intraoperative complications, comparing to the conventional free-hand technique., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Introduction: Malocclusions have a negative impact on oral-health-related quality of life (OHRQoL). Posterior cross-bite is one of the most prevalent malocclusions in the preadolescent population. This study investigated the influence of posterior cross-bites (unilateral or bilateral) on OHRQoL in an 11- to 14-year-old population., Materials and Methods: A pilot case-control study was carried out at the Dental Clinic of the University of Salamanca between 2021 and 2023. A consecutive sample of 120 preadolescent patients aged 11 to 14 years old was recruited. Three groups were analyzed: a control group (no posterior cross-bite) (n = 40), a group with unilateral posterior cross-bite (n = 40), and a group with bilateral posterior cross-bite (n = 40). To analyze the OHRQoL, the Spanish version of the Child Perception Questionnaire (CPQ-Esp 11-14 ) was used., Results: The mean age of the sample was 12.2 years old (±0.96 years). The group of patients with a bilateral posterior cross-bite was shown to have higher scores in all dimensions of the CPQ-Esp 11-14 , as well as a higher total score. Sex only influenced the oral symptom dimension of the CPQ-Esp 11-14 questionnaire; in this dimension, the girls described a greater impact. Age did not influence OHRQoL., Conclusion: The presence of a posterior cross-bite had a negative impact on OHRQoL in the preadolescent population that was studied.

Objective: The aim of the present systematic review and network meta-analysis (NMA) is to analyze the accuracy of image-guided-based orthodontic mini-implants placement techniques in the inter-radicular space., Methods: The study was conducted under the PRISMA recommendations. Three databases were searched up to July 2022. In vitro randomized experimental trials (RETs) including static computer-aided implant surgery (s-CAIS), mixed reality (MR), soft tissue static computer-aided implant surgery (ST s-CAIS) and conventional free-hand technique (FHT) for the orthodontic mini-implants placement in the inter-radicular space were selected. The risk of bias was assessed using the Current Research Information System scale. A random effects model was used in the NMA. Direct comparisons were combined with a random effects model in a frequentist NMA to estimate indirect comparisons, and the estimated effect size of the comparisons between techniques were analyzed by difference of means. Inconsistency was assessed with the Q test, with a significance level of p < 0.05, and a net heat plot., Results: A total of 92 articles was identified, and 8 RETs (8 direct comparisons of 4 techniques) were included in the NMA, which examined 4 orthodontic mini-implants placement techniques: s-CAIS, MR, ST s-CAIS, and FHT. Taking FHT as reference, s-CAIS and ST s-CAIS showed statistically significant coronal and apical deviation. In addition, s-CAIS showed statistically significant angular deviation. However, MR did not show statistically significant differences with respect to FHT, which presented the highest p-score. At the coronal deviation, ST s-CAIS presented the highest P-score (0.862), followed by s-CAIS (0.721). At the apical deviation, s-CAIS presented the highest P-score (0.844), followed by ST s-CAIS (0.791). Finally, at the angular deviation s-CAIS presented again the highest P-score (0.851)., Conclusions: Within the limitations of this study, it was found that the image-guided-based orthodontic mini-implants placement techniques showed more accuracy than the free-hand conventional placement technique; specially the computer-aided static navigation techniques for the orthodontic mini-implants placed in the inter-radicular space., (© 2023. The Author(s).)

Purpose: To compare the color dimensions, color discrepancies (ΔE00), and surface roughness of milled materials before and after the application of a bleaching agent., Material and Methods: A total of 10 extracted molars were obtained. Each tooth was cut in transversal sections, to create discs (3 mm thick, 10 mm diameter) (control group). Disk specimens of 8 materials were fabricated: polymethyl methacrylate (PMMA) interim material (PMMA-Telio group), 2 resin nanoceramics: (RNC-Ultimate group) and (RNC-Cerasmart group), 2 hybrid ceramics: (HC-Shofu group) and (HC-Enamic group), lithium disilicate (LD-Emax group), zirconia reinforced glass ceramic (ZGC-Suprinity group), and zirconia (Zr group) (n=10). Color measurements were obtained using a spectrophotometer before and after applying 35% hydrogen peroxide-based bleaching agent. Pre- and post-bleaching surface roughness analysis were completed using a profilometer., Results: Significant L*, a*, b*, and ΔE00 values differences were found ( P < .05). Color discrepancies (ΔE00) ranged from 0.30 ± 0.14 to 4.82 ± 0.10. The highest color discrepancies were measured on the PMMA-Telio group, while the lowest color discrepancies were computed on the ZGC-Suprinity, RNC-Ultimate, and RNC-Cerasmart. Significant surface roughness differences were found ( P <.05). The largest increase of surface roughness values between the pre- and post-bleaching measurements was obtained in the PMMA-Telio group with a mean ΔSa value of 4.73 ± 3.02, while the largest decrease of surface roughness values between the pre- and post-bleaching measurements was obtained in the Zr-InCeram group with a mean ΔSa value of -1.58 ± 0.10., Conclusions: The milled materials tested showed significant pre- and post-bleaching color and surface roughness discrepancies. Int J Prosthodont. doi: 10.11607/ijp.8359.

Purpose: The airway complex is modified by palatine expansion. Computer tomography has been used in the past to determine the change in volume, but there was a lack of a specific, reproducible method for this purpose. The present study sought to determine the accuracy, reproducibility, and repeatability of an innovative digital measurement technique for analyzing the volume of maxillary and nasal sinus airways following suture palatine expansion performed with the Hyrax disyuntor appliance., Methods: Patients underwent preoperative and postoperative cone-beam computed tomography (CBCT) scans. The datasets were subsequently uploaded into a digital treatment planning software to record the volume of the right and left maxillary sinus, as well as the nasal and maxillary sinus airway complex. The Gage Repeatability & Reproducibility statistical analysis methodology was used to evaluate the repeatability and reproducibility of this measurement technique when measuring the volume of maxillary and nasal sinus airways following suture palatine expansion with the Hyrax disyuntor appliance. Additionally, comparative analysis between preoperative and postoperative measures was performed using Student's t-test for statistical analysis., Results: In 5 patients, paired t-tests found statistically significant differences before and after treatment in the volumes of the left maxillary sinus (p = 0.002), right maxillary sinus (p = 0.001), and nasal and maxillary sinus airway complex (p = 0.005) after suture palatine expansion with the Hyrax disyuntor appliance., Conclusion: The proposed digital technique is an accurate, repeatable, and reproducible measurement technique for analyzing the volume of maxillary and nasal sinus airways following suture palatine expansion using the Hyrax disyuntor., (© 2022. The Author(s).)

The aim of this study was to analyze a novel digital technique to quantify the distal tooth displacement and derotation angle produced by the Carriere Motion Appliance (CMA). Twenty-one patients with a class II molar and canine relationship underwent orthodontic treatment with CMA. All patients were exposed before (STL1) and after the CMA placement (STL2), submitted to a digital impression, and afterwards, data were uploaded to specific cephalometric software to allow automatic mesh network alignment of the STL digital files. Subsequently, the distal tooth displacement of the upper canines and first upper molars, as well as the derotation angle of the first upper molars were analyzed using the Pearson correlation coefficient (ρ). Repeatability and reproducibility were analyzed using Gage R&R statistical analysis. An increase in canine displacement was correlated with an increase in contralateral canine displacement (ρ = 0.759; p < 0.000). An increase in canine displacement was correlated with an increase in molar displacement (ρ = 0.715; p < 0.001). An increase in upper first molar displacement was correlated with an increase in the contralateral upper first molar displacement (ρ = 0.609; p < 0.003) and the canine displacement (ρ = 0.728; p < 0.001). The distal tooth displacement showed a repeatability of 0.62% and reproducibility of 7.49%, and the derotation angle showed a repeatability of 0.30% and reproducibility of 0.12%. The novel digital measurement technique is a reproducible, repeatable, and accurate method for quantifying the distal tooth displacement of the upper canine and first upper molar, as well as the derotation angle of the first upper molars after using CMA.

Statement of Problem: Intraoral scanners (IOSs) have been used in dentistry for diagnostic and treatment purposes; however, the influence of environmental factors such as humidity or temperature on the accuracy of intraoral scanning is uncertain., Purpose: The purpose of this in vitro study was to evaluate the influence of relative humidity and ambient temperature on the accuracy, scanning time, and number of photograms of dentate complete arch intraoral digital scans., Material and Methods: A completely dentate mandibular typodont was digitized by using a dental laboratory scanner. Four calibrated spheres were attached following the International Organization for Standardization (ISO) standard 20 896. A watertight box was designed to simulate 4 different relative humidity conditions (50%, 70%, 80%, and 90%) (n = 30). An IOS (TRIOS 3) was used to obtain a total of 120 complete arch digital scans (n = 120). Scanning time and number of photograms of each specimen were recorded. All the scans were exported and compared with the master cast by using a reverse engineering software program. The linear distances among the reference spheres were used to calculate trueness and precision. A unifactorial analysis of variance (ANOVA) and Levene tests followed by the post hoc Bonferroni test were used to analyze trueness and precision data, respectively. A unifactorial ANOVA followed by a post hoc Bonferroni test was also conducted to analyze scanning time and the number of photogram data., Results: Statistically significant differences were found in trueness, precision, number of photograms, and scanning time (P<.05). Regarding trueness and precision, significant differences were found between the 50% and 70% relative humidity groups and the 80% and 90% relative humidity groups (P<.01). Regarding scanning time and number of photograms, significant differences were obtained among all groups, except between the 80% and 90% relative humidity groups (P<.01)., Conclusions: The relative humidity conditions tested influenced accuracy, scanning time, and number of photograms in complete arch intraoral digital scans. High relative humidity conditions resulted in the decreased scanning accuracy, longer scanning time, and greater number of photograms of complete arch intraoral digital scans., (Copyright © 2023 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Regenerative endodontic treatment (RET) has been considered a reliable procedure to treat immature necrotic teeth; however, the effect of dental trauma on the prognosis of RET is questionable. This systematic review aimed to evaluate the current level of evidence for revascularization techniques (the RET) in the management of traumatized necrotic immature permanent teeth with or without periapical radiolucent areas. Four electronic databases-PubMed, Web of Science, Scopus, and Embase-were searched until November 2022. Only randomized clinical trials, cohort studies, and case-control studies with a minimum of 10 cases and 12 months of follow-ups were included. The search identified 363 preliminary results. After discarding the duplicates and screening the titles, abstracts, and full texts, 13 articles were considered eligible. The results showed that RET techniques seemed to have high survival and success rates, 93.8% and 88.3%, respectively, in the treatment of traumatized necrotic immature permanent teeth. Root maturation with RET techniques seemed to be lower in traumatized teeth. Future studies are needed to evaluate root maturation in traumatized teeth using 3-dimensional radiographic evaluations. In addition, the lack of literature on the studies comparing RET and apexification (calcium hydroxide or an MTA) in the treatment of traumatized necrotic immature teeth highlights the necessity for high-level clinical studies comparing these treatment modalities.

Background: Zygomatic implants are widely used in the rehabilitation of severely atrophic maxillae, but implant placement is not without risks, and it can potentially cause damage to related anatomical structures. The aim of this study was to perform a comparative analysis of the accuracy of static navigation systems in placing zygomatic dental implants in comparison to dynamic navigation systems., Methods: Sixty zygomatic dental implants were randomly allocated to one of three study groups, categorized by which implant placement strategy was used: A: computer-aided static navigation system (n = 20) (GI); B: computer-aided dynamic navigation system (n = 20) (NI); or C: free-hand technique (n = 20) (FHI). For the computer-aided study groups, a preoperative cone-beam computed tomography (CBCT) scan of the existing situation was performed in order to plan the approach to be used during surgery. Four zygomatic dental implants were inserted in each of fifteen polyurethane stereolithographic models (n = 15), with a postoperative CBCT scan taken after the intervention. The pre- and postoperative CBCT scans were then uploaded to a software program used in dental implantology to analyze the angular deviations, apical end point, and coronal entry point. Student's t-test was used to analyze the results., Results: The results found statistically significant differences in apical end-point deviations between the FHI and NI (p = 0.0053) and FHI and GI (p = 0.0004) groups. There were also statistically significant differences between the angular deviations of the FHI and GI groups (p = 0.0043)., Conclusions: The manual free-hand technique may enable more accurate placement of zygomatic dental implants than computer-assisted surgical techniques due to the different learning curves required for each zygomatic dental implant placement techniques., (© 2023. The Author(s).)

Introduction: To assess the accuracy, repeatability and reproducibility of a measurement digital technique to quantify the wear of the bracket slot walls of the fixed multibracket appliance after orthodontic treatment with the previous measurement traditional technique (scanning electronic microscope (SEM))., Methods: A total of 100 fixed multibracket appliances were cemented during the 15 months orthodontic treatment and subsequently removed. The fixed multibracket appliances were submitted preoperatively and postoperatively to a micro-computed tomography (micro-CT) scan to obtain accurate standard tessellation language (STL) digital files of the fixed multibracket appliances and to a preoperatively and postoperatively SEM analysis. Afterwards, pre-operatively and postoperatively STL digital files of each fixed multibracket appliances were aligned using morphometric software with the best fit algorithm. Subsequently, area and volume wear of fixed multibracket appliances was identified, isolated and measured., Results: The repeatability and reproducibility of the digital measurement method for the area (mm 2 ) and volume (mm 3 ) were analyzed by Gage R&R statistical analysis. The area wear of the bracket slot walls of the fixed multibracket appliance after orthodontic treatment showed a repeatability of 3.7% and a reproducibility of 0%. The volume of the bracket slot walls of the fixed multibracket appliance after orthodontic treatment showed a repeatability of 0.9% and a reproducibility of 5.6%. However, the traditional measurement technique showed a repeatability of 0.58% and a reproducibility of 33.01%; hence, it was repeatable but not reproducible., Conclusions: The digital measurement technique is a reproducible, repeatable, and accurate method for quantifying the wear of the bracket slot walls of the fixed multibracket appliance after orthodontic treatment., (© 2023. The Author(s).)

Purpose: To assess the influence of the number of teeth (2, 3, or 4) and location (molars, molar and premolar, or premolars and canines) of the bilateral virtual occlusal record on the accuracy of the virtual maxillo-mandibular relationship acquired by an intraoral scanner (IOS)., Material and Methods: Diagnostic casts mounted on a semi-adjustable articulator were obtained. Four markers were adhered on the facial surfaces of the first molars and canines. The mounted casts were digitized using an extraoral scanner. Maxillary and mandibular intraoral digital scans were obtained using an intraoral scanner (TRIOS 4). The maxillary and mandibular digital scans were duplicated 105 times and divided into 7 groups based on the number of teeth (2, 3, or 4) and location (molar, molar and premolar, or premolars and canines) of the bilateral virtual occlusal records (n = 15). The alignment of the scans was automatically performed after the acquisition of the corresponding occlusal records by the IOS program. Eight linear distances between the gauge balls were computed on the reference scan and on the 105 digital scans. The distances obtained on the reference scan were used to calculate the discrepancies with the distances obtained on each experimental scan. The Shapiro-Wilk test showed that the data was normally distributed. The trueness and precision data were analyzed using 2-way ANOVA followed by pairwise comparison Tukey tests (α = 0.05)., Results: Two-way ANOVA showed that the number of teeth (p < 0.001) and the position of the virtual occlusal record (p < 0.001) were significant factors on the accuracy of the maxillo-mandibular relationship. Tukey test showed significant overall mean differences between the different groups tested: the 4-teeth group obtained the highest trueness, and the 2-teeth group showed the lowest trueness values (p < 0.001). Tukey test showed significant trueness differences between the virtual occlusal record locations. The 2-teeth record located more posteriorly obtained the lowest trueness. Significant differences in precision values were found among the subgroups tested (p < 0.001). The 2-teeth group obtained significantly more precision values than the 3- and 4-teeth groups. Additionally, there was a significant difference in precision values between the subgroup tested in which the first molar and second premolar location had the highest precision, while the first and second premolar's location obtained the lowest precision., Conclusions: The number of teeth and the location of the bilateral virtual occlusal record influenced the accuracy of the virtual maxillo-mandibular relationship obtained by the intraoral scanner tested. The more teeth included in the bilateral virtual occlusal record, the higher the accuracy of the maxillo-mandibular relationship. Additionally, the more anteriorly located the virtual bilateral occlusal record involving 2 or 3 teeth was, the higher the accuracy mean value., (© 2022 by the American College of Prosthodontists.)

The objective of the present study was to evaluate and compare the effect of the computer-aided static navigation technique on the accuracy of the maxillary skeletal expansion (MSE) appliances., Material and Methods: Forty orthodontic self-drilling mini-implants were placed in ten anatomically based standardized polyurethane models of a completely edentulous upper maxilla, manufactured using a 3D impression procedure. The four orthodontic self-drilling mini-implants for anchoring the MSE appliance were digitally planned on 3D planning software, based on preoperative cone-beam computed tomography (CBCT) scan and a 3D extraoral surface scan. Afterwards, the surgical templates were virtually planned and manufactured using stereolithography. Subsequently, the orthodontic self-drilling mini-implants were placed an postoperative CBCT scans were performed. Finally, coronal entry-point, apical end-point and angular deviations were calculated using a t-test for independent samples or a non-parametric Signed Rank test., Results: Statistically significant differences were not shown at coronal entry-point (p = 0.13), apical end-point (p = 0.41) and angular deviations (p = 0.27) between the planned and performed orthodontic self-drilling mini-implants., Conclusions: Computer-aided static navigation technique enables accurate orthodontic mini-implant placement for the MSE appliances., (© 2023. The Author(s).)

The aim of this work was to analyze and compare the removal capability, conical internal hex implant-abutment connection damage and thermal effect using ultrasonic and drilling techniques for the extraction of fractured abutment screws. Twenty abutment screws were randomly fractured into twenty dental implants and randomly extracted using the following removal techniques: Group A: drilling technique without irrigation (n = 10) (DT) and Group B: ultrasonic technique without irrigation (n = 10) (UT). The dental implants were submitted to a preoperative and postoperative micro-computed tomography (micro-CT) scan to obtain a Standard Tessellation Language (STL) digital file that determined the wear comparison by morphometry. Moreover, the thermographic effects generated by the DT and UT removal techniques were registered using a thermographic digital camera. Comparative analysis was performed by comparing the volumetric differences (mm 3 ) between preoperative and postoperative micro-CT scans and thermographic results (°C) using the Student t test. The DT extracted 8/10 and the US 9/10 abutment screws. The pairwise comparison revealed statistically significant differences between the volumetric differences of postoperative and preoperative micro-CT scans of the DT (- 0.09 ± - 0.02mm 3 ) and UT (- 0.93 ± - 0.32mm 3 ) study groups (p = 0.0042); in addition, the pairwise comparison revealed statistically significant differences between the thermographic values of the DT (38.12 ± - 10.82 °C) and UT (78.52 ± 5.43 °C) study groups (p < 0.001). The drilling technique without irrigation provides a less removal capability, less conical internal hex implant-abutment connection damage and less thermal effect than ultrasonic technique for the extraction of fractured abutment screws; however, the ultrasonic technique resulted more effective for the extraction of fractured abutment screws., (© 2022. The Author(s).)

Introduction: The purpose of this study was to compare and contrast the accuracy of endodontic access cavities created using an augmented reality appliance to those performed using the conventional technique., Materials and Methods: 60 single-rooted anterior teeth were chosen for study and randomly divided between two study groups: Group A-endodontic access cavities created using an augmented reality appliance as a guide ( n = 30) (AR); and Group B-endodontic access cavities performed with the manual (freehand) technique ( n = 30) (MN). A 3D implant planning software was used to plan the endodontic access cavities for the AR group, with a cone-beam computed tomography (CBCT) and 3D intraoral surface scan taken preoperatively and subsequently transferred to the augmented reality device. A second CBCT scan was taken after performing the endodontic access cavities to compare the planned and performed endodontic access for accuracy. Therapeutic planning software and Student's t -test were used to analyze the cavities at the apical, coronal, and angular levels. The repeatability and reproducibility of the digital measurement technique were analyzed using Gage R&R statistical analysis., Results: The paired t -test found statistically significant differences between the study groups at the coronal ( p = 0.0029) and apical ( p = 0.0063) levels; no statistically significant differences were found between the AR and MN groups at the angular ( p = 0.6596) level., Conclusions: Augmented reality devices enable the safer and more accurate performance of endodontic access cavities when compared with the conventional freehand technique.

The present study aims to evaluate and contrast the function of the rotational speed of NiTi alloy endodontic rotary files on how resistant they are to dynamic cyclic fatigue. Methods: A total of 150 NiTi alloy endodontic rotary files with similar geometrical design and metallurgical properties were randomly divided into study groups: Group A: 200 rpm (n = 30); Group B: 350 rpm (n = 30); Group C: 500 rpm (n = 30); Group D: reciprocating movement at 350 rpm with 120° counterclockwise and 30° clockwise motion (350 rpm+) (n = 30); and Group E: reciprocating movement at 400 rpm with 120° counterclockwise and 30° clockwise motion (400 rpm+) (n = 30). A dynamic device was designed to carry out dynamic cyclic fatigue tests using artificial root canal systems made from stainless steel with an apical diameter of 250 µm, 5 mm radius of curvature, 60° curvature angle, and 6% taper, and 20 mm in length. A Weibull statistical analysis and ANOVA test were used to analyze the results. Results: The ANOVA analysis showed differences in time to failure among all the study groups that were of statistical significance (p < 0.001). Conclusions: NiTi alloy endodontic rotary files using reciprocating movement at 350 rpm with 120° counterclockwise and 30° clockwise motion exhibit greater resistance to dynamic cyclic fatigue than files used with a reciprocating movement at 400 rpm with 120° counterclockwise and 30° clockwise motion, continuous rotational speed at 200 rpm, continuous rotational speed at 350 rpm, or continuous rotational speed at 500 rpm; it is therefore advisable to use reciprocating movements at a low speed.

(1) Background: This study compared the clinical and esthetic results of the double lateral sliding bridge flap (DLSBF) and the laterally closed tunnel (LCT) techniques, with a subepithelial connective tissue graft (SCTG), for the treatment of single Miller class II-III recessions in the mandibular anterior teeth. (2) Methods: This pseudorandomized clinical trial evaluated 14 patients, 7 of whom were part of the DLSBF + SCTG group, with an average follow-up of 58.7 ± 24.0 months, and 7 of whom were in the LCT + SCTG group, with an average follow-up of 16.7 ± 3.3 months. Clinical and esthetic evaluations of the following parameters were performed and the results for the two groups were compared: gingival recession depth, probing depth, keratinized tissue width, gingival thickness, percentage of root coverage and root coverage esthetic score. (3) Results: After the follow-up period, each technique provided evidence of a reduction in recession depth and clinical attachment level, as well as increased keratinized tissue width and gingival thickness, with statistically significant differences (p < 0.05). The analysis showed that gingival recession depth decreased less in the DLSBF group (4.3 ± 1.2 mm to 0.6 ± 1.1 mm) than it did in the LCT group (4.9 ± 1.1 mm to 0.1 ± 0.4 mm), but no significant difference was found between the two groups. Similarly, a greater reduction in the clinical attachment level parameter was observed in the LCT group, while a greater increase in gingival thickness was observed in the DLSBF group. The presence of scars was the only parameter for which statistically significant differences (p < 0.05) between the two study groups were found. (4) Conclusions: Within the limitations of the study, it indicates that the LCT + SCTG technique may be considered an optimal technique in terms of reducing gingival recession depth, complete root coverage and esthetic results for the treatment of single gingival recessions in the mandibular anterior teeth.

In this study, we compare and analyze the scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), morphometry and cyclic fatigue resistance of Endogal, PathMax, and Smarttrack novel brands of nickel−titanium (NiTi) alloy endodontic files. Material and Methods: Thirty sterile NiTi endodontic rotary files were randomly selected and assigned to one of the following study groups: A: 25.08 F2 Endogal (EDG) (n = 10); B: 25.08 F2 Path Max Pro (PMP) (n = 10); and C: 25.06 Smarttrack (ST) (n = 10). Dynamic cyclic fatigue tests were conducted using a cyclic fatigue device in stainless steel artificial root canal systems with an apical diameter of 250 µm, curvature angle of 60°, radius of curvature of 3 mm, and taper of 6%. Additionally, we analyzed the NiTi endodontic rotary files using EDX, SEM, and morphometry after micro-CT scanning. The results were analyzed using Weibull statistical analysis and ANOVA testing. Results: SEM, EDX, and morphometric analyses showed differences between the three novel brands of NiTi endodontic rotary files. Moreover, statistically significant differences were observed between the number of cycles to failure and time to failure of the three novel brands of NiTi endodontic rotary files (p < 0.001). Conclusions: Smarttrack NiTi alloy endodontic reciprocating files display greater resistance to cyclic fatigue than Endogal and Path Max Pro NiTi alloy endodontic rotary files, due to the reciprocating movement and metallurgical composition.

The present study seeks to describe a novel digital measurement technique for analyzing the wear volume of controlled memory (CM)-wire NiTi alloy endodontic reciprocating files after clinical use., Material and Methods: Ten CM-wire NiTi endodontic reciprocating files were randomly used in ten first upper molar teeth within four root canals. The CM-wire NiTi alloy endodontic reciprocating files were subjected to preoperative and postoperative micro-computed tomography (micro-CT) scans to obtain accurate digital imaging and communication on medicine (DICOM) digital files, which were segmented using intensity-based thresholding and an exclusive OR (XOR) logical operation (Boolean algebra logical operator) to obtain a mask of the location to localize and quantify the wear volume of the CM-wire NiTi alloy endodontic reciprocating files. Gage repeatability and reproducibility statistical analysis was applied to assess the reproducibility and repeatability of this measurement technique., Results: The analysis showed a repeatability and reproducibility of 0.00% for the digital measurement technique used to analyze the wear volume of CM-wire NiTi alloy endodontic reciprocating files after clinical use. Wear was mostly identified at the tip and cutting edges of the CM-wire NiTi alloy endodontic reciprocating files., Conclusions: This novel digital measurement technique is a repeatable, reproducible, and accurate method of quantifying the wear volume of CM-wire NiTi alloy endodontic reciprocating files after clinical use.

The objective of this in vitro study was to evaluate and compare the accuracy of zygomatic dental implant (ZI) placement carried out using a dynamic navigation system. Materials and Methods: Forty (40) ZIs were randomly distributed into one of two study groups: (A) ZI placement via a computer-aided dynamic navigation system (n = 20) (navigation implant (NI)); and (B) ZI placement using a conventional free-hand technique (n = 20) (free-hand implant (FHI)). A cone-beam computed tomography (CBCT) scan of the existing situation was performed preoperatively to plan the surgical approach for the computer-aided study group. Four zygomatic dental implants were placed in anatomically based polyurethane models (n = 10) manufactured by stereolithography, and a postoperative CBCT scan was performed. Subsequently, the preoperative planning and postoperative CBCT scans were added to dental implant software to analyze the coronal entry point, apical end point, and angular deviations. Results were analyzed using the Student’s t-test. Results: The results showed statistically significant differences in the apical end-point deviations between FHI and NI (p = 0.0018); however, no statistically significant differences were shown in the coronal entry point (p = 0.2617) or in the angular deviations (p = 0.3132). Furthermore, ZIs placed in the posterior region showed more deviations than the anterior region at the coronal entry point, apical end point, and angular level. Conclusions: The conventional free-hand technique enabled more accurate placement of ZIs than the computer-assisted surgical technique. In addition, placement of ZIs in the anterior region was more accurate than that in the posterior region.

Several regeneration techniques and materials have been proposed for the healing of bone defects after surgical endodontic treatment; however, the existing literature does not provide evidence on the most recommended techniques or materials. The aim of the present systematic review and network meta-analysis (NMA) is to summarize the clinical evidence on the efficacy of guided tissue regeneration techniques (GRTs). The PRISMA recommendations were followed. Four databases were searched up to December 2021. Randomized clinical trials (RCTs) with a minimum follow-up of 6 months were included. The risk of bias was assessed using the Cochrane Collaboration tool. A fixed effects model and frequentist approach were used in the NMA. Direct GRT technique comparisons were combined to estimate indirect comparisons, and the estimated effect size of the comparisons was analyzed using the odds ratio (OR). Inconsistency was assessed with the Q test, with a significance level of p < 0.01, and a net heat plot. A total of 274 articles was identified, and 11 RCTs (6 direct comparisons of 15 techniques) were included in the NMA, which examined 6 GRT techniques: control, Os, PL, MB, MB + Os, and MB + PL. The MB + Os group compared to the control (OR = 3.67, 95% CI: 1.36-9.90) and to the MB group (OR = 3.47, 95% CI: 1.07-11.3) showed statistically significant ORs ( p ˂ 0.05). The MB + Os group presented the highest degree of certainly (P-score = 0.93).

The aim of this study was to analyse and compare the position of single-rooted autotransplanted teeth using computer-aided SNT drilling and conventional freehand (FT) drilling, by comparing the planned and performed position at the coronal, apical and angular level., Materials and Methods: Forty single-root upper teeth were selected and distributed into the following study groups: A. Autotransplanted tooth using the computer-aided static navigation technique (SNT) ( n = 20) and B. Autotransplanted tooth using the conventional free-hand technique (FT) ( n = 20). Afterwards, the teeth were embedded into two experimental models and 10 single-root upper teeth were randomly autotransplanted in each experimental model. The experimental models were submitted to a preoperative cone-beam computed tomography (CBCT) scan and a digital impression by a 3D intraoral scan, in addition to a postoperative CBCT scan, after the autotransplantation. Datasets from postoperative CBCT scans of the two study groups were uploaded to the 3D implant planning software, aligned with the autotransplantation planning, and the coronal, apical and angular deviations were measured. The results were analysed using Student's t -test and Mann-Whitney non-parametric statistical analysis., Results: Coronal ( p = 0.079) and angular ( p = 0.208) statistical comparisons did not present statistically significant differences; however, statistically significant differences between the apical deviation of the SNT and FT study groups ( p = 0.038) were also observed., Conclusions: The computer-aided static navigation technique does not provide higher accuracy in the positioning of single-root autotransplanted teeth compared to the conventional free-hand technique.

The objective of the present study was to evaluate and compare the dentin removal capacity of Endogal Kids and Reciproc Blue NiTi alloy endodontic reciprocating systems for root canal treatments in primary second molar teeth via a micro-computed tomography (micro-CT) scan., Materials and Methods: Sixty root canal systems in fifteen primary second molar teeth were chosen and classified into one of the following study groups: A: EK3 Endogal Kids ( n = 30) (EDG) and B. R25 Reciproc Blue ( n = 30) (RB). Preoperative and postoperative micro-CT scans were uploaded into image processing software to analyze the changes in the volume of root canal dentin using a mathematical algorithm that enabled progressive differentiation between neighboring pixels after defining and segmenting the root canal systems in both micro-CT scans. Volumetric variations in the root canal system and the root canal third were calculated using a t -test for independent samples or a nonparametric Mann-Whitney-Wilcoxon test., Results: Statistically significant differences ( p = 0.0066) in dentin removal capacity were found between the EDG (2.89 ± 1.26 mm 3 ) and RB (1.22 ± 0.58 mm 3 ) study groups for the coronal root canal third; however, no statistically significant differences were found for the middle ( p = 0.4864) and apical ( p = 0.6276) root canal thirds., Conclusions: Endogal and Reciproc Blue NiTi endodontic reciprocating systems showed similar capacity for the removal of root canal dentin, except for the coronal root canal third, in which the Reciproc Blue NiTi endodontic reciprocating system preserved more root canal dentin tissue.

This study aimed at analyzing and comparing the ease of removal of fractured nickel-titanium (NiTi) endodontic rotary files from the root canal system between the ultrasonic tips and the Endo Rescue appliance removal systems, as well as comparing the volume of dentin removed between ultrasonic tips and the Endo Rescue appliance using a micro-computed tomography (micro-CT) scan., Material and Methods: Forty NiTi endodontic rotary files were intentionally fractured in 40 root canal systems of 20 lower first molar teeth and distributed into the following study groups: A: Ultrasonic tips ( n = 20) (US) and B: Endo Rescue device ( n = 20) (ER). Preoperative and postoperative micro-CT scans were uploaded into image processing software to analyze the volumetric variations of dentin using an algorithm that enables progressive differentiation between neighboring pixels after defining and segmenting the fractured NiTi endodontic rotary files and the root canal systems in both micro-CT scans. A non-parametric Mann-Whitney-Wilcoxon test or t -test for independent samples was used to analyze the results., Results: The US and ES study groups saw 8 (1 mesiobuccal and 7 distal root canal system) and 3 (distal root canal system) fractured NiTi endodontic rotary files removed, respectively. No statistically significant differences were found in the amount of dentin removed between the US and ER study groups at the mesiobuccal ( p = 0.9109) and distal root canal system ( p = 0.8669)., Conclusions: Ultrasonic tips enable greater ease of removal of NiTi endodontic rotary files from the root canal system, with similar amounts of dentin removal between the two methods.

This article describes a numerical procedure for estimating the fatigue life of NiTi endodontic rotary files. An enhanced finite element model reproducing the interaction of the endodontic file rotating inside the root canal was developed, which includes important phenomena that allowed increasing the degree of realism of the simulation. A method based on the critical plane approach was proposed for extracting significant strain results from finite element analysis, which were used in combination with the Coffin-Manson relation to predict the fatigue life of the NiTi rotary files. The proposed procedure is illustrated with several numerical examples in which different combinations of endodontic rotary files and root canal geometries were investigated. By using these analyses, the effect of the radius of curvature and the angle of curvature of the root canal on the fatigue life of the rotary files was analysed. The results confirm the significant influence of the root canal geometry on the fatigue life of the NiTi rotary files and reveal the higher importance of the radius of curvature with respect to the angle of curvature of the root canal.

In the present retrospective study, we aimed to assess the replicability and reproducibility of a novel digital measurement technique for analyzing the volumes of the left and right maxillary sinuses and the nasal and maxillary sinus airway complex after a sinus lift procedure using the lateral window approach, to provide an accurate measurement technique for easily applying in clinical practice and to allow pre-operative assessment of maxillary sinus lift surgery, avoiding complications and making surgery more predictable., Material and Methods: Thirty patients with partially edentulous posterior maxilla were selected and submitted to bilateral sinus lift using the lateral window approach technique, with grafting materials selected and submitted to cone beam computed tomography (CBCT) scans, both pre- and postoperatively. Then, datasets were uploaded to therapeutic digital planning software to measure the volume of the right and left maxillary sinuses and the nasal and maxillary sinus airway complex. Gage R&R statistical analysis was performed to assess the replicability and reproducibility of the digital measurement technique., Results: The variability attributable to the novel digital measurement technique was 3.4% for replicability and 3.4% for reproducibility of the total variability of the samples., Conclusion: The novel digital method proposed is a replicable and reproducible technique for analyzing the volume of the right and left maxillary sinuses and the nasal and maxillary sinus airway complex after a sinus lift using the lateral window approach technique, allowing an accurate pre-operative assessment of maxillary sinus lift surgery, avoiding complications and making surgery more predictable.

To compare and contrast the accuracy of piezoelectric ultrasonic insert (PUI) and trephine bur (TB) osteotomy site preparation techniques for apical location. (1) Material and methods: A total of 138 osteotomy site preparations were randomly distributed into one of two study groups. Group A: TB technique ( n = 69) and B: PUI technique ( n = 69). A preoperative cone-beam computed tomography scan and an intraoral scan were performed and uploaded to implant-planning software to plan the virtual osteotomy site preparations for apical location. Subsequently, the osteotomy site preparations were performed in the experimental models with both osteotomy site preparation techniques and a postoperative CBCT scan was performed and uploaded into the implant-planning software and matched with the virtually planned osteotomy site preparations to measure the deviation angle and horizontal deviation as captured at the coronal entry point and apical end-point between osteotomy site preparations using Student's t -test statistical analysis. (2) Results: The paired t -test found statistically significant differences at the coronal entry-point deviations ( p = 0.0104) and apical end-point deviations ( p = 0.0104) between the TB and PUI study groups; however, no statistically significant differences were found in the angular deviations ( p = 0.309) between the trephine bur and piezoelectric ultrasonic insert study groups. (3) Conclusions: The results showed that the TB is more accurate than the PUI for apical location.

The aim of this study was to analyze and compare the influence of the geometrical cross-section design on the dynamic cyclic fatigue resistance of NiTi endodontic rotary files., Materials and Methods: Forty sterile endodontic rotary files were selected and distributed into the following study groups: A: 25.06 double S-shaped cross-section NiTi alloy endodontic rotary files (Mtwo) ( n = 10); B: 20.04 rectangular cross-section NiTi alloy endodontic rotary files (T Pro E1) ( n = 10); C: 25.04 convex triangular cross-section NiTi alloy endodontic rotary files (T Pro E2) ( n = 10); and D: 25.06 triangular cross-section NiTi alloy endodontic rotary files (T Pro E4) ( n = 10). A cyclic fatigue device was used to conduct the static cyclic fatigue tests with stainless steel artificial root canal systems with 200 µm and 250 µm apical diameter, 60° curvature angle, 3 mm radius of curvature, 20 mm length, and 4% and 8% taper. The results were analyzed using the ANOVA test and Weibull statistical analysis., Results: All the pairwise comparisons presented statistically significant differences between the time to failure and number of cycles to failure for the cross-section design study groups ( p < 0.001)., Conclusions: the double S-shaped cross-section of Mtwo NiTi endodontic files shows higher cyclic fatigue resistance than the rectangular cross-section of T Pro E1 NiTi endodontic files, the convex triangular cross-section of T Pro E2 NiTi endodontic files, and the triangular cross-section of T Pro E4 NiTi endodontic files.

Current endodontic procedures continue to be unsuccessful for completely removing pathogens present inside the root canal system, which can lead to recurrent infections. In this study, we aimed to assess the antimicrobial capacity and tissue response of two inorganic bactericidal additives incorporated into a paste root canal sealer on contaminated root dentin in vivo. An experimental study was performed in 30 teeth of five Beagle dogs. After inducing microbiological contamination, root canal systems were treated by randomly incorporating one of two antimicrobial additives into a commercial epoxy-amine resin sealer (AH Plus), i.e., G3T glass-ceramic (n = 10) and ZnO-enriched glass (n = 10); 10 samples were randomized as a control group. After having sacrificed the animals, microbiological, radiological, and histological analyses were performed, which were complemented with an in vitro bactericidal test and characterization by field emission scanning electron microscopy. The tested groups demonstrated a non-significant microbiological reduction in the postmortem periapical index values between the control group and the bactericidal glass-ceramic group ( p = 0.885), and between the control group and the ZnO-enriched glass group ( p = 0.169). The histological results showed low values of inflammatory infiltrate, and a healing pattern characterized by fibrosis in 44.4% of the G3T glass-ceramic and 60.0% of ZnO-enriched glass. Bactericidal glassy additives incorporated in this root canal sealer are safe and effective in bacterial reduction.

The aim of the study was to validate a novel digital measurement method to quantify the volume of the midpalatal suture after rapid maxillary expansion (RME)., Material and Methods: Eight patients with maxillary skeletal transverse deficiency were submitted to palatine suture expansion using the McNamara orthodontic appliance during a period of nine months. After 30 days of treatment, all patients were exposed postoperatively to a cone-beam computed tomography (CBCT) scan. Afterwards, the scans were uploaded into the three-dimensional orthodontic-planning software to allow the volumetric assessment of the palatine suture expansion through palatine rapid maxillary expansion using a McNamara appliance. The repeatability was analyzed by repeating twice the measures by a single operator and reproducibility was analyzed by repeating three times the measures by two operators, and Gage R&R statistical analysis was performed., Results: The expansion of the midpalatal suture by means of the rapid maxillary expansion technique, in terms of digital volume measurement, showed a repeatability value of 0.09% and between the two operators a reproducibility value of 0.00% was shown., Conclusions: The novel measurement technique demonstrated a high repeatability and reproducibility rate for volume assessment of the palatine suture expansion through palatine rapid maxillary expansion technique.

To analyze the effect of a computer-aided static navigation technique and mixed reality technology on the accuracy of orthodontic micro-screw placement. Material and methods : Two hundred and seven orthodontic micro-screws were placed using either a computer-aided static navigation technique (NAV), a mixed reality device (MR), or a conventional freehand technique (FHT). Accuracy across different dental sectors was also analyzed. CBCT and intraoral scans were taken both prior to and following orthodontic micro-screw placement. The deviation angle and horizontal deviation were then analyzed; these measurements were taken at the coronal entry point and apical endpoint between the planned and performed orthodontic micro-screws. In addition, any complications resulting from micro-screw placement, such as spot perforations, were also analyzed across all dental sectors. Results : The statistical analysis showed significant differences between study groups with regard to the coronal entry-point ( p < 0.001). The NAV study group showed statistically significant differences from the FHT ( p < 0.001) and MR study groups ( p < 0.001) at the apical end-point ( p < 0.001), and the FHT group found significant differences from the angular deviations of the NAV ( p < 0.001) and MR study groups deviations ( p = 0.0011). Different dental sectors also differed significantly. ( p < 0.001) Additionally, twelve root perforations were observed in the FHT group, while there were no root perforations in the NAV group. Conclusions : Computer-aided static navigation technique enable more accurate orthodontic micro-screw placement and fewer intraoperative complications when compared with the mixed reality technology and conventional freehand techniques.

The aim of this study was to analyze the accuracy and predictability of the indirect bonding technique of fixed buccal multibracket appliances using a customized iterative closest point algorithm., Materials and Methods: A total of 340 fixed buccal multibracket appliances were virtually planned and bonded on 34 experimental anatomically based acrylic resin models by using orthodontic templates designed and manufactured to indirectly bond the fixed buccal multibracket appliances. Afterwards, the models were submitted to a three-dimensional impression technique by an intraoral scanner, and the standard tessellation language digital files from the virtual planning and the digital impression were aligned, segmented, and realigned using morphometric software. Linear positioning deviations (mm) of the fixed buccal multibracket appliances were quantified at mesio-distal, bucco-lingual/palatal, and gingival/occlusal (vertical) planes, and angular deviations (°) were also recorded by analyzing the torque, tip, and rotation using a customized iterative closest point algorithm, the script for which allowed for an accuracy measurement procedure by comparing the tessellation network positioning of both standard tessellation language digital files., Results: The mean mesio-distal deviation was -0.065 ± 0.081 mm, the mean bucco-lingual/palatal deviation was 0.129 ± 0.06 m, the mean vertical deviation was -0.094 ± 0.147 mm, the mean torque deviation was -0.826 ± 1.721°, the mean tip deviation was -0.271 ± 0.920°, and the mean rotation deviation was -0.707 ± 0.648°., Conclusion: The indirect bonding technique provides accurate and predictable positioning of fixed buccal multibracket appliances.

To analyze the influence of the computer-aided static navigation technique on the accuracy of placement of orthodontic micro-screws. One hundred and thirty-eight orthodontic micro-screws were randomly assigned to the following study groups: Group A. orthodontic micro-screw placement using a computer-aided static navigation technique ( n = 69); B. orthodontic micro-screw placement using the conventional freehand technique ( n = 69). In addition, the accuracy in the canine-premolar, premolar and molar sectors was analyzed in each study group. Cone-beam computed tomography and intraoral scans were taken both prior and subsequent to orthodontic micro-screw placement. The images were then uploaded using a 3D implant planning software, where the deviation and horizontal angles were analyzed using a multivariate linear model. These measurements were taken at the coronal entry point and apical endpoint between the planned orthodontic micro-screws. In addition, any complications resulting from micro-screw placement, such as spot perforations, were also analyzed in all dental sectors. The statistical analysis showed significant differences between the two study groups with regard to the coronal entry-point, apical end-point ( p < 0.001) and angular deviations ( p < 0.001) between the computer-aided static navigation technique and freehand technique study groups. Moreover, statistically significant differences were showed between the different dental sectors ( p < 0.001). Additionally, twelve root perforations were observed at the conventional free hand technique study group while there were no root perforations in the computer-aided static navigation technique study group. The results showed that the computer-aided static navigation technique enables a more accurate orthodontic micro-screw placement with less intraoperative complications when compared with the conventional freehand technique.