Search

A recent discovery of high-performance Mg3Sb2 has ignited tremendous research activities in searching for novel Zintl-phase compounds as promising thermoelectric materials. Herein, a series of planar Zintl-phase XCuSb (X = Ca, Sr, Ba) thermoelectric materials are developed by vacuum induction melting. All these compounds exhibit high carrier mobilities and intrinsic low lattice thermal conductivities (below 1 W·m−1·K−1 at 1010 K), resulting in peak p-type zT values of 0.14, 0.30, and 0.48 for CaCuSb, SrCuSb, and BaCuSb, respectively. By using BaCuSb as a prototypical example, the origins of low lattice thermal conductivity are attributed to the strong interlayer vibrational anharmonicity of Cu—Sb honeycomb sublattice. Moreover, the first-principles calculations reveal that n-type BaCuSb can achieve superior thermoelectric performance with the peak zT beyond 1.1 because of larger conducting band degeneracy. This work sheds light on the high-temperature thermoelectric potential of planar Zintl compounds, thereby stimulating intense interest in the investigation of this unexplored material family for higher zT values.

This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials and Interfaces, copyright © 2022 American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsami.2c02675. Metallic 1T-phase MoS2 exhibits superior hydrogen evolution reaction (HER) performance than natural 2H-phase MoS2 owing to its higher electrical conductivity and abundance of active sites. However, the reported 1T-MoS2 catalysts usually suffer from extreme instability, which results in quick phase transformation at ambient conditions. Herein, we present a facile approach to engineer the phase of MoS2 by introducing intercalated hydrazine. Interestingly, the as-synthesized 1T-dominant MoS2 sample demonstrates excellent ambient stability without noticeable degradation for 3 months. Additionally, the 1T-dominant MoS2 exhibits superior electrical conductivity (~700 times higher than that of 2H-MoS2) and improved electrochemical catalytic performance (current density ~12 times larger than that of 2H-MoS2 at an overpotential of 300 mV vs the reversible hydrogen electrode, RHE). Through experimental characterizations and density functional theory (DFT) calculation, we conclude that the stabilization of the metallic phase could be attributed to the electron donation from hydrazine molecules to the adjacent Mo atoms. The phase control strategy in this work provides a guideline to develop other highly efficient and stable two-dimensional (2D) electrocatalysts.

Heavy metals in reservoir sediments were analyzed to assess the pollution level and to understand the potential risk on water supply safety. Heavy metals in sediments will enter the biological chain through bio-enrichment and bio-amplification in water and eventually pose a threat to the safety of drinking water supply. Analysis of eight sampling sites in JG (Jian gang) drinking water reservoir of the sediments showed that from Feb-2018 to Aug-2019 heavy metals including Pb, Ni, Cu, Zn, Mo and Cr increased by 1.09%-17.2%. Vertical distributions of heavy metals indicated that the concentrations increased gradually by 9.6%-35.8%. Risk assessment code analysis indicated that Pb, Zn and Mo were of high risk in the main reservoir area. What’s more, enrichment factors of Ni and Mo were 2.76–3.81 and 5.86–9.41, respectively, showing the characteristics of exogenous input. The continuous monitoring results of the bottom water showed that the concentration of heavy metals in the bottom water exceeded the environmental quality standard value of surface water in China, and exceeded the standard by 1.76 times (Pb), 1.43 times (Zn), 2.04 times (Mo), respectively. Heavy metals in the sediments of JG Reservoir, especially in the main reservoir area, have a potential risk of release from the sediment to the overlying water. Water supply reservoir as a source of drinking water, its quality is directly related to human health and production activities. Therefore, this first study on JG Reservoir is of great significance for the protection of drinking water safety and human health.

Breast cancer (BRCA) remains a serious threat to women’s health, with the rapidly increasing morbidity and mortality being possibly due to a lack of a sophisticated classification system. To date, no reliable biomarker is available to predict prognosis. Cuproptosis has been recently identified as a new form of programmed cell death, characterized by the accumulation of copper in cells. However, little is known about the role of cuproptosis in breast cancer. In this study, a cuproptosis-related genes (CRGs) risk model was constructed, based on transcriptomic data with corresponding clinical information relating to breast cancer obtained from both the TCGA and GEO databases, to assess the prognosis of breast cancer by comprehensive bioinformatics analyses. The CRGs risk model was constructed and validated based on the expression of four genes (NLRP3, LIPT1, PDHA1 and DLST). BRCA patients were then divided into two subtypes according to the CRGs risk model. Furthermore, our analyses revealed that the application of this risk model was significantly associated with clinical outcome, immune infiltrates and tumor mutation burden (TMB) in breast cancer patients. Additionally, a new clinical nomogram model based on risk score was established and showed great performance in overall survival (OS) prediction, confirming the potential clinical significance of the CRGs risk model. Collectively, our findings revealed that the CRGs risk model can be a useful tool to stratify subtypes and that the cuproptosis-related signature plays an important role in predicting prognosis in BRCA patients.

Lithium-rich manganese-based oxides (LRMO) are regarded as promising cathode materials for powering electric applications due to their high capacity (250 mAh g–1) and energy density (~900 Wh kg–1). However, poor cycle stability and capacity fading have impeded the commercialization of this family of materials as battery components. Surface modification based on coating has proven successful in mitigating some of these problems, but a microscopic understanding of how such improvements are attained is still lacking, thus impeding systematic and rational design of LRMO-based cathodes. In this work, first-principles density functional theory (DFT) calculations are carried out to fill out such a knowledge gap and to propose a promising LRMO-coating material. It is found that SrTiO3 (STO), an archetypal and highly stable oxide perovskite, represents an excellent coating material for Li1.2Ni0.2Mn0.6O2 (LNMO), a prototypical member of the LRMO family. An accomplished atomistic model is constructed to theoretically estimate the structural, electronic, oxygen vacancy formation energy, and lithium-transport properties of the LNMO/STO interface system, thus providing insightful comparisons with the two integrating bulk materials. It is found that (i) electronic transport in the LNMO cathode is enhanced due to partial closure of the LNMO band gap (~0.4 eV) and (ii) the lithium ions can easily diffuse near the LNMO/STO interface and within STO due to the small size of the involved ion-hopping energy barriers. Furthermore, the formation energy of oxygen vacancies notably increases close to the LNMO/STO interface, thus indicating a reduction in oxygen loss at the cathode surface and a potential inhibition of undesirable structural phase transitions. This theoretical work therefore opens up new routes for the practical improvement of cost-affordable lithium-rich cathode materials based on highly stable oxide perovskite coatings.

Yunhan Zhang,1,* Meihui Xia,2,* Zizhen Zhou,3 Xiaoqing Hu,1 Jiabin Wang,1 Meiyu Zhang,3 Yi Li,4 Liankun Sun,1 Fangfang Chen,4,5 Huimei Yu1,6 1Key Laboratory of Pathobiology, Ministry of Education, Department of Pathophysiology, College of Basic Medical Sciences, Jilin University, Changchun 130021, People’s Republic of China; 2Department of Obstetrics & Gynecology, The First Hospital of Jilin University, Changchun, Jilin 130021, People’s Republic of China; 3Clinical Medical College, Jilin University, Changchun 130021, People’s Republic of China; 4State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, Jilin 130012, People’s Republic of China; 5Department of Gastrointestinal, Colorectal and Anal Surgery, China-Japan Union Hospital of Jilin University, Changchun, Jilin 130033, People’s Republic of China; 6Animal Experiment Center, College of Basic Medical Sciences, Jilin University, Changchun 130021, People’s Republic of China*These authors contributed equally to this workCorrespondence: Huimei YuKey Laboratory of Pathobiology, Ministry of Education, Department of Pathophysiology, College of Basic Medical Sciences, Jilin University, Changchun 130021, People’s Republic of ChinaTel +86 431 85619485Email yuhuimei@jlu.edu.cnFangfang ChenDepartment of Gastrointestinal, Colorectal and Anal Surgery, China-Japan Union Hospital of Jilin University, Changchun, Jilin 130033, People’s Republic of ChinaTel +86 431 84995312Email cff@jlu.edu.cnMethods: In this study, we used MTT assays to demonstrate that a combination of SPIO-Serum and wild-type p53 overexpression can reduce ovarian cancer cell viability in vitro. Prussian blue staining and iron assays were used to determine changes in intracellular iron concentration following SPIO-Serum treatment. TEM was used to evaluate any mitochondrial damage induced by SPIO-Serum treatment, and Western blot was used to evaluate the expression of the iron transporter and lipid peroxidation regulator proteins. JC-1 was used to measure mitochondrial membrane potential, and ROS levels were estimated by flow cytometry. Finally, xCT protein expression and mitochondrial ROS levels were confirmed using fluorescence microscopy.Results: SPIO-Serum effectively induced lipid peroxidation and generated abundant toxic ROS. It also facilitated the downregulation of GPX4 and xCT, ultimately resulting in iron-dependent oxidative death. These effects could be reversed by iron chelator DFO and lipid peroxidation inhibitor Fer-1. SPIO-Serum treatment disrupted intracellular iron homeostasis by regulating iron uptake and the cells presented with missing mitochondrial cristae and ruptured outer mitochondrial membranes. Moreover, we were able to show that p53 contributed to SPIO-Serum-induced ferroptosis in ovarian cancer cells.Conclusion: SPIO-Serum induced ferroptosis and overexpressed p53 contributed to ferroptosis in ovarian cancer cells. Our data provide a theoretical basis for ferroptosis as a novel cell death phenotype induced by nanomaterials.Keywords: ferroptosis, SPIO, p53, TF, xCT, iron-based nanomaterials

In this work, we study theoretically the electronic and phonon transport properties of heterojunction SnSe/SnS, bilayer SnSe and SnS. The energy filtering effect caused by the nano heterostructure in SnSe/SnS induces an increase in the Seebeck coefficient, causing a large power factor. We calculate the phonon relaxation time and lattice thermal conductivity κL for the three structures; the heterogeneous nanostructure could effectively reduce κL due to the enhanced phonon boundary scattering at interfaces. The average κL notably reduces from around 3.3 (3.2) W m-1 K-1 for bilayer SnSe (SnS) to nearly 2.2 W m-1 K-1 for SnSe/SnS at 300 K. As a result, the average ZT (ZTave in b and c directions) reaches 1.63 with temperature range around 300-800 K, which is improved by 63% (25%) compared with that of bilayer SnSe (SnS). Our theoretical results show that the heterogeneous nanostructure is an innovative approach for improving the Seebeck coefficient and significantly reducing κL, effectively enhancing thermoelectric properties.

Drug resistance to bacteria becomes an emerging intractable problem, therefore, developing novel antibacterial agents has become urgently needed. Herein, a bio-inspired design strategy was adopted to synthesize a series of beetle-like macromolecule of multiple quaternary ammonium salts (QASs), which was designed with different cationic charge densities and numbers of hexadecane chains by adjusting their different quaternization degree (QD). It was found that the fabricated fabric surface with them exhibited controllable and outstanding antibacterial and bacterially anti-adhesive properties. More importantly, the antibacterial efficiency was demonstrated to be enhanced with the increasing of QD, and related to the zeta potential, and surface tension. Additionally, the proposed bacterially anti-adhesive model of action revealed the "resisting effect" of hydration layer which greatly resisted the adhesion of bacteria.

Multiple-band degeneracy has been widely recognized to be beneficial for high thermoelectric performance. Here, we discover that the p-type Dirac bands with lower degeneracy synergistically produce a higher Seebeck coefficient and electrical conductivity in topological semimetal BaAgBi. The anomalous transport phenomenon intrinsically originated from the asymmetric electronic structures: (i) complete p-type Dirac bands near the Fermi level facilitate high and strong energy-dependent hole relaxation time; (ii) the presence of additional parabolic conduction valleys allows for a large density of states to accept scattered electrons, leading to an enlarged hole-electron relaxation time ratio and, thus, weakened bipolar effect. In combination with the strong lattice anharmonicity, an exceptional p-type average

All-inorganic CsPbX3 (X = Cl, Br, I, or mixed halides) perovskite quantum dots (QDs) exhibit tunable optical bandgaps and narrow emission peaks, which have received worldwide interest in the field of both photovoltaics (PVs) and light-emitting diodes (LEDs). Herein, it is reported a discovery that CsPbI3 perovskite QD solar cell can simultaneously deliver high PV performance and intense electroluminescence. In specific, the multifunctional CsPbI3 QD film is fabricated through a simple yet efficient solid-state-ligand exchange process using a tailored organic ligand triphenyl phosphite (TPPI). The function of QD surface manipulation using TPPI here is proven to be twofold, balancing the carrier transport and effectively passivating the QD surface to produce conductive and emissive QD film. The CsPbI3 perovskite QD solar cell delivers a champion efficiency of 15.21% with improved open circuit voltage and high fill factor. Concurrently functioning as a red LED, the CsPbI3 perovskite QD solar cell outputs electric power to light conversion efficiency approaching 4%, a record value for QD electroluminescent PVs. The results here indicate that these versatile perovskite QDs may be a promising candidate for fabricating multifunctional optoelectronic devices.

Thermoelectric materials are typically highly degenerate semiconductors, which require high carrier concentration. However, the efficiency of conventional doping by replacing host atoms with alien ones is restricted by solubility limit, and, more unfavorably, such a doping method is likely to cause strong charge-carrier scattering at ambient temperature, leading to deteriorated electrical performance. Here, an unconventional doping strategy is proposed, where a small trace of alien atoms is used to stabilize cation vacancies in Cu

The structural and electronic properties of MnO2 based electrocatalysts are key factors determining their electrochemical performance. To date, it is still challenging to synergistically tune the crystal structure, morphology, and electronic band (i.e., band gap and band alignments) of MnO2 through facile synthesis approaches. This study has reported a one-step hydrothermal method to synthesize a prototypical MnO2 electrocatalyst with optimized structural and electrochemical properties. By simply adjusting the hydrothermal time, the phase transition from polymorphic d to a can be induced in MnO2. The obtained nanowires on nanosheets structure grown in-situ on nickel foam provides a large surface area, great accessible active sites, and good mass/charge transfer efficiency. Further investigation through first-principles calculations reveals that compared to d-MnO2, the a-MnO2 polymorph with rich oxygen vacancies has better band-alignment tunability, which is also beneficial for improving the electrochemical performance. The a phase MnO2 exhibits superior catalytic performance for both OER and HER (OER overpotential of 0.45 V at 50 mA cm-2 and HER overpotential of 0.14 V at 50 mA cm-2). The developed synthesis method can be extended to catalyst designs that require precise control of phase and morphology evolution in a wide range of applications.

Structural defects are ubiquitous for polycrystalline perovskite films, compromising device performance and stability. Herein, a universal method is developed to overcome this issue by incorporating halide perovskite quantum dots (QDs) into perovskite polycrystalline films. CsPbBr3 QDs are deposited on four types of halide perovskite films (CsPbBr3, CsPbIBr2, CsPbBrI2, and MAPbI3) and the interactions are triggered by annealing. The ions in the CsPbBr3 QDs are released into the thin films to passivate defects, and concurrently the hydrophobic ligands of QDs self‐assemble on the film surfaces and grain boundaries to reduce the defect density and enhance the film stability. For all QD‐treated films, PL emission intensity and carrier lifetime are significantly improved, and surface morphology and composition uniformity are also optimized. Furthermore, after the QD treatment, light‐induced phase segregation and degradation in mixed‐halide perovskite films are suppressed, and the efficiency of mixed‐halide CsPbIBr2 solar cells is remarkably improved to over 11% from 8.7%. Overall, this work provides a general approach to achieving high‐quality halide perovskite films with suppressed phase segregation, reduced defects, and enhanced stability for optoelectronic applications., A universal approach is reported to fabricate perovskite films by incorporating inorganic CsPbBr3 quantum dots (QDs) into halide perovskite bulk films. Upon post‐annealing, the released elements from QDs compensate vacancies, and hydrophobic ligands on QDs passivate under‐charged Pb atoms and self‐assemble on surface. Therefore, the resulting films with reduced trap density, suppressed phase segregation, improved surface uniformity and enhanced stability are enabled.

This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Materials Letters, copyright © 2021 American Chemical Societ, after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsmaterialslett.1c00592. A cost-effective and environmentally friendly Pb source is a prerequisite for achieving large-scale, low-cost perovskite photovoltaic devices. Currently, the commonly used method to prepare the lead source is based on a fire smelting process, requiring a high temperature of more than 1000 °C, which results in environmental pollution. Spent car lead acid batteries are an environmentally hazardous waste; however, they can alternatively serve as an abundant and inexpensive Pb source. Due to “self-purification”, quantum dots feature a high tolerance of impurities in the precursor since the impurities tend to be expelled from the small crystalline cores during colloidal nucleation. Herein, PbI2 recycled from spent lead acid batteries via a facile low-temperature solution process is used to synthesize CsPbI3 quantum dots, which simultaneously brings multiple benefits including (1) avoiding pollution originating from the fire smelting process; (2) recycling the Pb waste from batteries; and (3) synthesizing high-quality quantum dots. The resulting CsPbI3 quantum dots have photophysical properties such as PLQY and carrier lifetimes on par with those synthesized from the commercial PbI2 due to expelling of the impurity Na atoms. The resulting solar cells deliver comparable power conversion efficiencies: 14.0% for the cells fabricated using recycled PbI2 and 14.7% for the cells constructed using commercial PbI2. This work paves a new and feasible path to applying recycled Pb sources in perovskite photovoltaics.

Quasi-two-dimensional (quasi-2D) semiconductors have garnered immense research interest for next-generation electronics and thermoelectrics due to their unique structural, mechanical, and transport properties. However, most quasi-2D semiconductors experimentally synthesized so far have relatively low carrier mobility, preventing the achievement of exceptional power output. To break through this obstacle, we propose a route based on the crystal symmetry arguments to facilitate the charge transport of quasi-2D semiconductors, in which the horizontal mirror symmetry is found to vanish the electron-phonon coupling strength mediated by phonons with purely out-of-plane vibrational vectors. This is demonstrated in ZrBeSi-type quasi-2D systems, where the representative sample Ba

Magnetic topological semimetals provide new opportunities for power generation and solid-state cooling based on thermoelectric (TE) effect. The interplay between magnetism and nontrivial band topology prompts the magnetic topological semimetals to yield strong transverse TE effect, while the longitudinal TE performance is usually poor. Herein, it is demonstrated that the magnetic Weyl semimetal TbPtBi has high value for both transverse and longitudinal thermopower with large power factor (PF). At 300 K and 13.5 Tesla, the transverse thermopower and PF reach up to 214 µV K

Single crystal of tin selenide (SnSe) was studied by micro-Raman spectroscopy under atmosphere conditions. The effect of varying the incident laser power on the sample up to 2 mW was analyzed. The Raman spectra showed that the number of all vibrational modes have not decreased or increased, but all peaks red-shifted and softened obviously as the laser power increased to the threshold value. The temperature-dependent micro-Raman study of the single crystal was carried out for illustrating thermal effect due to the high incident laser power. A new SnSe2 phase appeared at high temperature without vacuum and become the dominant phase at the surface of the crystal gradually because of oxidation. Detecting few amounts of SnSe2 crystals on the surface of single crystal shows the high sensitivity of Raman spectroscopy. High resolution transmission electron microscopy (HRTEM) was also used to confirm that the newly generated SnSe2 phase is precipitated by SnSe under high temperature oxidation conditions. To study the Raman spectra of low thermal conductivity materials under high temperature and non-vacuum conditions, lower incident laser power should be used to avoid the influence of additional thermal effects.

In this work, we study theoretically the electronic and phonon transport properties of heterojunction SnSe/SnS, bilayer SnSe and SnS. The energy filtering effect caused by the nano heterostructure in SnSe/SnS induces an increase in the Seebeck coefficient, causing a large power factor. We calculate the phonon relaxation time and lattice thermal conductivity κL for the three structures; the heterogeneous nanostructure could effectively reduce κL due to the enhanced phonon boundary scattering at interfaces. The average κL notably reduces from around 3.3 (3.2) W m-1 K-1 for bilayer SnSe (SnS) to nearly 2.2 W m-1 K-1 for SnSe/SnS at 300 K. As a result, the average ZT (ZTave in b and c directions) reaches 1.63 with temperature range around 300-800 K, which is improved by 63% (25%) compared with that of bilayer SnSe (SnS). Our theoretical results show that the heterogeneous nanostructure is an innovative approach for improving the Seebeck coefficient and significantly reducing κL, effectively enhancing thermoelectric properties.

Thermoelectric properties of a black phosphorus/blue phosphorus van der Waals heterostructure are investigated by using first-principles calculations and Boltzmann transport theory for both electrons and phonons. It is found that the heterostructure is both energetically and kinetically stable even at higher temperature. Compared with those of the constituent black and blue phosphorus monolayers, the thermoelectric performance of the heterostructure is significantly enhanced due to sharply decreased thermal conductivity caused by the presence of van der Waals interactions, as well as obviously reduced band gaps and multi-valley structures resulting from type-II band alignment. As a consequence, the room temperature ZT value can reach 1.6, which is much higher than those of the components. Furthermore, we obtain ZT over 2.0 in a wide temperature range from 400 to 800 K, and a maximum ZT of ∼3.2 can be realized at 700 K, which is surprisingly good for systems consisting of light elements only.

Nano-engineered technology has been applied in thermoelectrics for the enhanced performance owing to the substantial thermal conductivity reduction. Based on density functional theory, the electronic and phonon transport properties of the Bi2O2S bulk and two-dimensional (2D) nano-thin film are systematically studied. Due to the typical layered structure, the thermoelectric properties of bismuth chalcogenides Bi2O2S vary greatly along different axes showing strong anisotropy. It was found that the dimensionality reduction in the Bi2O2S bulk could not only avoid the poor thermoelectric effect in the interlayer direction, but also notably reduce the intralayer lattice thermal conductivity from the bulk value of 2.9 W m−1 K−1 to nearly 1.85 W m−1 K−1 at 300 K. The average ZT value of the Bi2O2S monolayer could reach 3.4 at 700 K. Meanwhile, the thermoelectric conversion efficiency of the nano-thin film could be improved by 75% compared with that of the bulk material. Our theoretical results prove that low-dimensional nanostructure technology could be an effective approach to enhance the thermoelectric conversion efficiency of materials.

The thermoelectric performance of InSb has been significantly improved via defect engineering or nanostructuring to reduce thermal conductivity in the past decade; however, less attention has been paid to improve its electrical properties via other key factors, e.g., carrier scattering mechanism, bipolar effect, etc. Here, we show that Bi doping on the Sb site not only significantly suppresses the high-temperature bipolar effect, but also leads to band convergence which enhances the Seebeck coefficient. As a result, a maximum zT of ∼0.43 @ 675 K is achieved in InSb0.97Bi0.03, which is increased by ∼43% as compared to that of pure InSb. In addition, the comparison of Bi and Ga doping (J. Mater. Chem., 2011, 21, 12398–12401) on the low-temperature electrical transport properties reveals that Bi doping is more beneficial for achieving high power factor due to the mixed acoustic phonon and ionized impurity scattering. Finally, it is suggested that Bi should be an effective dopant for electrical optimization of InSb and a further experiment on co-doping of Ga and Bi will be a considerable alternative for thermoelectric performance enhancement of InSb-based materials.

Thermal stratification has a significant impact on water quality and ecological characteristics. Reservoir operation and climate change have an effect on the thermal regime. The Jinpen Reservoir is a large canyon-shaped reservoir located in Shaanxi Province with a strong thermal stratification, which resulted in an anaerobic condition in the hypolimnion. We used a hydrodynamic module based on MIKE 3 to simulate the thermal structure of the Jinpen Reservoir and study the relationship between the thermal regime, reservoir operation and climate change. Based on the daily hydrological and climatic data from 2004 to 2013, we made 13 hypothetical simulated conditions that included extreme change of inflow volume, water level, air temperature, radiation, inflow water temperature and selective withdrawal to explore the effect of different factors on the thermal regime. The results showed that the period of thermal stratification, water column stability and surface water temperature were influenced by these factors. With the increase of air temperature, the simulation results indicated a stronger thermal stratification and a higher surface water temperature, which could cause water safety problems. Deep withdrawal could decrease water column stability and prompt water column mixing early, which could be used by reservoir managers to optimize the reservoir operation.

Invasiveness and metastatic potential are among the most essential characteristics of malignant tumors. Furthermore, it has been reported that autophagy and invasion are enhanced when tumor cells are grown in adverse conditions, such as nutritional deficiency and starvation. However, the association between autophagy and invasion remains largely unclear. In the present study, Earle's balanced salt solution (EBSS) was used to induce autophagy and an autophagy inhibitor was used to block autophagy. The results of Transwell assays revealed that autophagy inhibition limited the invasiveness of human ovarian cancer cells. Furthermore, the results of invadopodia formation assay indicated that autophagy stimulated invadopodia formation, and the selective autophagy receptor and signaling adaptor, sequestosome-1 (SQSTM1/p62 or simply p62), was closely associated with invadopodia formation in human ovarian cancer SKOV3 cells. The results of western blot analysis indicated that autophagy induced changes in p62 protein levels and p62 then functioned as a negative regulator of extracellular signal-regulated kinase 1/2 (ERK1/2) activity and invadopodia formation. The interaction between autophagy and invasion may thus be a self-protective mechanism for tumor cells in an unfavorable environment of nutritional deficiency, that maintains their survival and leads to increased invasiveness. An exploration of the intrinsic link between autophagy and invasion may provide a novel theoretical basis to reverse the resistance of tumor cells to a nutritional deficient environment.