Search

The Radio Neutrino Observatory in Greenland (RNO-G) is the first in-ice radio array in the northern hemisphere for the detection of ultra-high energy neutrinos via the coherent radio emission from neutrino-induced particle cascades within the ice. The array is currently in phased construction near Summit Station on the Greenland ice sheet, with 7~stations deployed during the first two boreal summer field seasons of 2021 and 2022. In this paper, we describe the installation and system design of these initial RNO-G stations, and discuss the performance of the array as of summer 2024.

White dwarfs offer a compelling avenue for probing interactions of dark matter particles, particularly in the challenging sub-GeV mass regime. The constraints derived from these celestial objects strongly depend on the existence of high dark matter densities in the corresponding regions of the Universe, where white dwarfs are observed. This implies that excluding the parameter space using local white dwarfs would present a significant challenge, primarily due to the low dark matter density in the solar neighbourhood. This limitation prompts the exploration of alternative scenarios involving dark matter particles with a diverse spectrum of kinetic energies. In this work, we investigate how these dark matter particles traverse the star, interact with stellar matter, and ultimately get captured. To accomplish this, we approximate the dark matter flux as a delta function and inspired on the Three Portal Model, we assume that fermionic dark matter interacts with stellar matter either through a broken $U(1)$ gauge vector mediator or a scalar. In our computations, we consider how interactions might vary across different energy regimes, from high-energy deep inelastic scattering and inelastic scatterings via the production of $N-$ and $\Delta-$ resonances to lower-energy elastic interactions with nucleons and nuclei. Our study models these inelastic resonant interactions with dark matter and vector or scalar mediators for the very first time. We provide insights into the specific conditions required for successfully boosted dark matter capture in white dwarfs. We found that, in general, dark matter capture is most likely to occur at low energies, as expected. However, in the high-energy regime, there remains a small window for capture through resonant and deep inelastic scattering processes., Comment: 24 pages, 7 figures

Effective spoken dialog systems should facilitate natural interactions with quick and rhythmic timing, mirroring human communication patterns. To reduce response times, previous efforts have focused on minimizing the latency in automatic speech recognition (ASR) to optimize system efficiency. However, this approach requires waiting for ASR to complete processing until a speaker has finished speaking, which limits the time available for natural language processing (NLP) to formulate accurate responses. As humans, we continuously anticipate and prepare responses even while the other party is still speaking. This allows us to respond appropriately without missing the optimal time to speak. In this work, as a pioneering study toward a conversational system that simulates such human anticipatory behavior, we aim to realize a function that can predict the forthcoming words and estimate the time remaining until the end of an utterance (EOU), using the middle portion of an utterance. To achieve this, we propose a training strategy for an encoder-decoder-based ASR system, which involves masking future segments of an utterance and prompting the decoder to predict the words in the masked audio. Additionally, we develop a cross-attention-based algorithm that incorporates both acoustic and linguistic information to accurately detect the EOU. The experimental results demonstrate the proposed model's ability to predict upcoming words and estimate future EOU events up to 300ms prior to the actual EOU. Moreover, the proposed training strategy exhibits general improvements in ASR performance., Comment: Submitted to ICASSP2025

Hundreds of exoplanets between 1-1.8 times the size of the Earth have been discovered on close in orbits. However, these planets show such a diversity in densities that some appear to be made entirely of iron, while others appear to host gaseous envelopes. To test this diversity in composition, we update the masses of 5 rocky exoplanets (HD 93963 A b, Kepler-10 b, Kepler-100 b, Kepler-407 b, and TOI-1444 b) and present the confirmation of a new planet (TOI-1011) using 187 high precision RVs from Gemini/MAROON-X and Keck/KPF. Our updated planet masses suggest compositions closer to that of the Earth than previous literature values for all planets in our sample. In particular, we report that two previously identified ``super-Mercuries'' (Kepler-100 b and HD 93963 A b) have lower masses that suggest less iron-rich compositions. We then compare the ratio of iron to rock-building species to the abundance ratios of those elements in their host stars. These updated planet compositions do not suggest a steep relationship between planet and host star compositions, contradictory to previous results, and suggest that planets and host stars have similar abundance ratios., Comment: Submitted to AJ 09/30/2024

Field Programmable Gate Arrays (FPGAs) play a significant role in computationally intensive network processing due to their flexibility and efficiency. Particularly with the high-level abstraction of the P4 network programming model, FPGA shows a powerful potential for packet processing. By supporting the P4 language with FPGA processing, network researchers can create customized FPGA-based network functions and execute network tasks on accelerators directly connected to the network. A feature of the P4 language is that it is stateless; however, the FPGA implementation in this research requires state information. This is accomplished using P4 externs to describe the stateful portions of the design and to implement them on the FPGA using High-Level Synthesis (HLS). This paper demonstrates using an FPGA-based SmartNIC to efficiently extract source-destination IP address information from network packets and construct anonymized network traffic matrices for further analysis. The implementation is the first example of the combination of using P4 and HLS in developing network functions on the latest AMD FPGAs. Our design achieves a processing rate of approximately 95 Gbps with the combined use of P4 and High-level Synthesis and is able to keep up with 100 Gbps traffic received directly from the network.

We have developed a new set of Application-Specific Integrated Circuits (ASICs) of the TARGET family (CTC and CT5TEA), designed for the readout of signals from photosensors in cameras of Imaging Atmospheric Cherenkov Telescopes (IACTs) for ground-based gamma-ray astronomy. We present the performance and design details. Both ASICs feature 16 channels, with CTC being a Switched-Capacitor Array (SCA) sampler at 0.5 to 1 GSa/s with a 16,384 sample deep storage buffer, including the functionality to digitize full waveforms at arbitrary times. CT5TEA is its companion trigger ASIC (though may be used on its own), which provides trigger information for the analog sum of four (and 16) adjacent channels. Since sampling and triggering takes place in two separate ASICs, the noise due to interference from the SCA is suppressed, and allows a minimal trigger threshold of $\leq$ 2.5 mV (0.74 photo electrons (p.e.)) with a trigger noise of $\leq$ 0.5 mV (0.15 p.e.). For CTC, a maximal input voltage range from $-$0.5 V up to 1.7 V is achieved with an effective bit range of $>$ 11.6 bits and a baseline noise of 0.7 mV. The cross-talk improved to $\leq$ 1% over the whole $-$3 dB bandwidth of 220 MHz and even down to 0.2% for 1.5 V pulses of 10 ns width. Not only is the performance presented, but a temperature-stable calibration routine for pulse mode operation is introduced and validated. The resolution is found to be $\sim$ 2.5% at 33.7 mV (10 p.e.) and $\leq$ 0.3% at 337 mV (100 p.e.) with an integrated non-linearity of $<$ 1.6 mV. Developed for the Small-Sized Telescope (SST) and Schwarzschild-Couder Telescope (SCT) cameras of the Cherenkov Telescope Array Observatory (CTAO), CTC and CT5TEA are deployed for both prototypes and shall be integrated into the final versions., Comment: 18 pages, 26 figures, 1 table

TOI-6255~b (GJ 4256) is an Earth-sized planet (1.079$\pm0.065$ $R_\oplus$) with an orbital period of only 5.7 hours. With the newly commissioned Keck Planet Finder (KPF) and CARMENES spectrographs, we determined the planet's mass to be 1.44$\pm$0.14 $M_{\oplus}$. The planet is just outside the Roche limit, with $P_{\rm orb}/P_{\rm Roche}$ = 1.13 $\pm0.10$. The strong tidal force likely deforms the planet into a triaxial ellipsoid with a long axis that is $\sim$10\% longer than the short axis. Assuming a reduced stellar tidal quality factor $Q_\star^\prime \approx10^7$, we predict that tidal orbital decay will cause TOI-6255 to reach the Roche limit in roughly 400 Myr. Such tidal disruptions may produce the possible signatures of planet engulfment that have been on stars with anomalously high refractory elemental abundances compared to its conatal binary companion. TOI-6255 b is also a favorable target for searching for star-planet magnetic interactions, which might cause interior melting and hasten orbital decay. TOI-6255 b is a top target (Emission Spectroscopy Metric of about 24) for phase curve observations with the James Webb Space Telescope., Comment: 18 pages, 7 figures, 5 tables, accepted to AAS Journals. The first RV mass measurement from the Keck Planet Finder

Planet formation is expected to be severely limited in disks of low metallicity, owing to both the small solid mass reservoir and the low opacity accelerating the disk gas dissipation. While previous studies have found a weak correlation between the occurrence rates of small planets ($\leq$4R$_\oplus$) and stellar metallicity, so far no studies have probed below the metallicity limit beyond which planet formation is predicted to be suppressed. Here, we constructed a large catalog of ~110,000 metal-poor stars observed by the TESS mission with spectroscopically-derived metallicities, and systematically probed planet formation within the metal-poor regime ([Fe/H] $\leq$ -0.5) for the first time. Extrapolating known higher-metallicity trends for small, short-period planets predicts the discovery of ~68 superEarths around these stars (~85,000 stars) after accounting for survey completeness; however, we detect none. As a result, we have placed the most stringent upper limit on super-Earth occurrence rates around metal-poor stars (-0.75 < [Fe/H] $\leq$ -0.5) to date, $\leq$ 1.67%, a statistically significant (p-value=0.000685) deviation from the prediction of metallicity trends derived with Kepler and K2. We find a clear host star metallicity cliff for super-Earths that could indicate the threshold below which planets are unable to grow beyond an Earth-mass at short orbital periods. This finding provides a crucial input to planet formation theories, and has implications for the small planet inventory of the Galaxy and the galactic epoch at which the formation of small planets started., Comment: Accepted to AJ

In recent years, the gauge group $U(1)_{L_\mu-L_\tau}$ has received a lot of attention since it can, in principle, account for the observed excess in the anomalous muon magnetic moment $(g-2)_\mu$, as well as the Hubble tension. Due to unavoidable, loop-induced kinetic mixing with the SM photon and $Z$, the $U(1)_{L_\mu-L_\tau}$ gauge boson $A'$ can contribute to stellar cooling via decays into neutrinos. In this work, we perform for the first time an \textit{ab initio} computation of the neutrino emissivities of white dwarf stars due to plasmon decay in a model of gauged $U(1)_{L_\mu-L_\tau}$. A key result is that current observations of the early-stage white dwarf neutrino luminosity at the 30\% level exclude previously allowed regions of the parameter space favoured by a simultaneous explanation of the $(g-2)_\mu$ and $H_0$ anomalies. In this work, we present the relevant white dwarf cooling limits over the entire $A'$ mass range. In particular, we have performed a rigorous computation of the luminosities in the resonant regime, where the $A'$ mass is comparable to the white dwarf plasma frequencies., Comment: 17 pages, 6 figures, 2 data files; v2: improved discussion of the cooling limit, matches journal version to appear in JHEP

The Radio Neutrino Observatory - Greenland (RNO-G) seeks discovery of ultra-high energy neutrinos from the cosmos through their interactions in ice. The science program extends beyond particle astrophysics to include radioglaciology and, as we show herein, solar observations, as well. Currently seven of 35 planned radio-receiver stations (24 antennas/station) are operational. These stations are sensitive to impulsive radio signals with frequencies between 80 and 700 MHz and feature a neutrino trigger threshold for recording data close to the thermal floor. RNO-G can also trigger on elevated signals from the Sun, resulting in nanosecond resolution time-domain flare data; such temporal resolution is significantly shorter than from most dedicated solar observatories. In addition to possible RNO-G solar flare polarization measurements, the Sun also represents an extremely useful above-surface calibration source. Using RNO-G data recorded during the summers of 2022 and 2023, we find signal excesses during solar flares reported by the solar-observing Callisto network and also in coincidence with $\sim$2/3 of the brightest excesses recorded by the SWAVES satellite. These observed flares are characterized by significant time-domain impulsivity. Using the known position of the Sun, the flare sample is used to calibrate the RNO-G absolute pointing on the radio signal arrival direction to sub-degree resolution. We thus establish the Sun as a regularly observed astronomical calibration source to provide the accurate absolute pointing required for neutrino astronomy.

The problem Level Planarity asks for a crossing-free drawing of a graph in the plane such that vertices are placed at prescribed y-coordinates (called levels) and such that every edge is realized as a y-monotone curve. In the variant Constrained Level Planarity (CLP), each level $y$ is equipped with a partial order $\prec_y$ on its vertices and in the desired drawing the left-to-right order of vertices on level $y$ has to be a linear extension of $\prec_y$. Ordered Level Planarity (OLP) corresponds to the special case of CLP where the given partial orders $\prec_y$ are total orders. Previous results by Br\"uckner and Rutter [SODA 2017] and Klemz and Rote [ACM Trans. Alg. 2019] state that both CLP and OLP are NP-hard even in severely restricted cases. In particular, they remain NP-hard even when restricted to instances whose width (the maximum number of vertices that may share a common level) is at most two. In this paper, we focus on the other dimension: we study the parameterized complexity of CLP and OLP with respect to the height (the number of levels). We show that OLP parameterized by the height is complete with respect to the complexity class XNLP, which was first studied by Elberfeld et al. [Algorithmica 2015] (under a different name) and recently made more prominent by Bodlaender et al. [FOCS 2021]. It contains all parameterized problems that can be solved nondeterministically in time $f(k) n^{O(1)}$ and space $f(k) \log n$ (where $f$ is a computable function, $n$ is the input size, and $k$ is the parameter). If a problem is XNLP-complete, it lies in XP, but is W[$t$]-hard for every $t$. In contrast to the fact that OLP parameterized by the height lies in XP, it turns out that CLP is NP-hard even when restricted to instances of height 4. We complement this result by showing that CLP can be solved in polynomial time for instances of height at most 3., Comment: A preliminary version of this paper appeared in the proceedings of the 40th International Symposium on Computational Geometry (SoCG 2024)

We collected near-infrared spectra of 65 cool stars with the NASA InfraRed Telescope Facility (IRTF) and analyze them to calculate accurate metallicities and stellar parameters. The sample of 55 M dwarfs and 10 K dwarfs includes 25 systems with confirmed planets and 27 systems with planet candidates identified by the K2 and TESS missions. Three of the 25 confirmed planetary systems host multiple confirmed planets and two of the 27 planet candidate systems host multiple planet candidates. Using the new stellar parameters, we re-fit the K2 and TESS light curves to calculate updated planet properties. In general, our updated stellar properties are more precise than those previously reported and our updated planet properties agree well with those in the literature. Lastly, we briefly examine the relationship between stellar mass, stellar metallicity, and planetary system properties for targets in our sample and for previously characterized planet-hosting low-mass stars. We provide our spectra, stellar parameters, and new planetary fits to the community, expanding the sample available with which to investigate correlations between stellar and planetary properties for low-mass stars., Comment: 4 tables, 6 figures

We study the following combinatorial problem. Given a set of $n$ y-monotone \emph{wires}, a \emph{tangle} determines the order of the wires on a number of horizontal \emph{layers} such that the orders of the wires on any two consecutive layers differ only in swaps of neighboring wires. Given a multiset~$L$ of \emph{swaps} (that is, unordered pairs of wires) and an initial order of the wires, a tangle \emph{realizes}~$L$ if each pair of wires changes its order exactly as many times as specified by~$L$. \textsc{List-Feasibility} is the problem of finding a tangle that realizes a given list~$L$ if such a tangle exists. \textsc{Tangle-Height Minimization} is the problem of finding a tangle that realizes a given list and additionally uses the minimum number of layers. \textsc{List-Feasibility} (and therefore \textsc{Tangle-Height Minimization}) is NP-hard [Yamanaka, Horiyama, Uno, Wasa; CCCG 2018]. We prove that \textsc{List-Feasibility} remains NP-hard if every pair of wires swaps only a constant number of times. On the positive side, we present an algorithm for \textsc{Tangle-Height Minimization} that computes an optimal tangle for $n$ wires and a given list~$L$ of swaps in $O((2|L|/n^2+1)^{n^2/2} \cdot \varphi^n \cdot n)$ time, where $\varphi \approx 1.618$ is the golden ratio and $|L|$ is the total number of swaps in~$L$. From this algorithm, we derive a simpler and faster version to solve \textsc{List-Feasibility}. We also use the algorithm to show that \textsc{List-Feasibility} is in NP and fixed-parameter tractable with respect to the number of wires. For \emph{simple} lists, where every swap occurs at most once, we show how to solve \textsc{Tangle-Height Minimization} in $O(n!\varphi^n)$ time., Comment: This work is a merger of arXiv:1901.06548 and arXiv:2002.12251

Conventional computing paradigm struggles to fulfill the rapidly growing demands from emerging applications, especially those for machine intelligence, because much of the power and energy is consumed by constant data transfers between logic and memory modules. A new paradigm, called "computational random-access memory (CRAM)" has emerged to address this fundamental limitation. CRAM performs logic operations directly using the memory cells themselves, without having the data ever leave the memory. The energy and performance benefits of CRAM for both conventional and emerging applications have been well established by prior numerical studies. However, there lacks an experimental demonstration and study of CRAM to evaluate its computation accuracy, which is a realistic and application-critical metrics for its technological feasibility and competitiveness. In this work, a CRAM array based on magnetic tunnel junctions (MTJs) is experimentally demonstrated. First, basic memory operations as well as 2-, 3-, and 5-input logic operations are studied. Then, a 1-bit full adder with two different designs is demonstrated. Based on the experimental results, a suite of modeling has been developed to characterize the accuracy of CRAM computation. Scalar addition, multiplication, and matrix multiplication, which are essential building blocks for many conventional and machine intelligence applications, are evaluated and show promising accuracy performance. With the confirmation of MTJ-based CRAM's accuracy, there is a strong case that this technology will have a significant impact on power- and energy-demanding applications of machine intelligence.

We report co-propagation experiments of the quantum channel (at 1310 nm) of a Quantum Key Distribution (QKD) system with Dense Wavelength Division Multiplexing (DWDM) data channels in the 1550 nm range. Two configurations are assessed. The first one is a single span configuration where various lengths of Standard Single Mode Fiber (SSMF) (from 20 to 70 km) are used and the total WDM channels power is varied. The Secure Key Rate (SKR) and the Quantum Bit Error Ratio (QBER) are recorded showing that up to ~17 dBm total power of 30 or 60 channels at 100 Gb/s can coexist with the quantum channel. A metric to evaluate the co-propagation efficiency is also proposed to better evaluate the ability of a QKD system to provide secure keys in a co-propagation regime. The second experiment is a three spans link with a cascade of three QKD systems and two trusted nodes in a 184 km total link length. We report the transmission of a coherent 400 Gb/s Dual Polarization DP-16QAM (Quadrature Amplitude Modulation) channel that transports a QKD secured 100 GbE data stream, with other fifty-four 100 Gb/s WDM channels. Encryption is demonstrated at the same time as co-propagation., Comment: arXiv admin note: text overlap with arXiv:2305.13742

Intensity interferometry for astrophysical observations has gained increasing interest in the last decade. The method of correlating photon fluxes at different telescopes for high resolution astronomy without access to the phase of the incoming light is insensitive to atmospheric turbulence and doesn't require high-precision optical path control. The necessary large collection areas can be provided by Imaging Atmospheric Cherenkov Telescopes. Implementation of intensity interferometers to existing telescope systems such as VERITAS and MAGIC has proven to be successful for high-resolution imaging of stars. In April 2022 we equipped two telescopes of the H.E.S.S. array in Namibia with an intensity interferometry setup to measure southern sky stars and star systems during the bright moon period. We mounted an external optical system to the lid of the telescope cameras, which splits the incoming light and feeds it into two photomultipliers in order to measure the zero-baseline correlation within one telescope in addition to the cross correlation between the telescopes. The optical elements are motorised, which enables live correction of tracking inaccuracies of the telescopes. During the campaign we measured the spatial correlation curves and thereby the angular diameters of {\lambda} Sco (Shaula) and {\sigma} Sgr (Nunki), while we also performed systematic studies of our interferometer using the multiple star system of {\alpha} Cru (Acrux).

A crossing-free morph is a continuous deformation between two graph drawings that preserves straight-line pairwise noncrossing edges. Motivated by applications in 3D morphing problems, we initiate the study of morphing graph drawings in the plane in the presence of stationary point obstacles, which need to be avoided throughout the deformation. As our main result, we prove that it is NP-hard to decide whether such an obstacle-avoiding 2D morph between two given drawings of the same graph exists. This is in sharp contrast to the classical case without obstacles, where there is an efficiently verifiable (necessary and sufficient) criterion for the existence of a morph., Comment: Appears in Proc. SOFSEM 2024

We study the problem of gradually representing a complex graph as a sequence of drawings of small subgraphs whose union is the complex graph. The sequence of drawings is called \emph{storyplan}, and each drawing in the sequence is called a \emph{frame}. In an outerplanar storyplan, every frame is outerplanar; in a forest storyplan, every frame is acyclic. We identify graph families that admit such storyplans and families for which such storyplans do not always exist. In the affirmative case, we present efficient algorithms that produce straight-line storyplans., Comment: Appears in Proc. SOFSEM 2024

Federated Learning (FL) distributes machine learning (ML) training across many edge devices to reduce data transfer overhead and protect data privacy. Since FL model training may span millions of devices and is thus resource-intensive, prior work has focused on improving its resource efficiency to optimize time-to-accuracy. However, prior work generally treats all resources the same, while, in practice, they may incur widely different costs, which instead motivates optimizing cost-to-accuracy. To address the problem, we design CEFL, which uses adaptive cost-aware client selection policies to optimize an arbitrary cost metric when training FL models. Our policies extend and combine prior work on utility-based client selection and critical learning periods by making them cost-aware. We demonstrate CEFL by designing carbon-efficient FL, where energy's carbon-intensity is the cost, and show that it i) reduces carbon emissions by 93\% and reduces training time by 50% compared to random client selection and ii) reduces carbon emissions by 80%, while only increasing training time by 38%, compared to a state-of-the-art approach that optimizes training time.

This study considers the characteristics of planetary systems with giant planets based on a population-level analysis of the California Legacy Survey planet catalog. We identified three characteristics common to hot Jupiters. First, while not all hot Jupiters have a detected outer giant planet companion ($M \sin i$ = 0.3--30 $M_{\textrm{Jup}}$), such companions are ubiquitous when survey completeness corrections are applied for orbital periods out to 40,000 days. Giant harboring systems without a hot Jupiter also host at least one outer giant planet companion per system. Second, the mass distributions of hot Jupiters and other giant planets are indistinguishable. However, within a planetary system that includes a hot Jupiter, the outer giant planet companions are at least $3\times$ more massive than the inner hot Jupiters. Third, the eccentricity distribution of the outer companions in hot Jupiter systems (with an average model eccentricity of $\langle e\rangle=0.34\pm0.05$) is different from the corresponding outer planets in planetary systems without hot Jupiters ($\langle e\rangle=0.19\pm0.02$). We conclude that the existence of two gas giants, where the outermost planet has an eccentricity $\ge0.2$ and is $3\times$ more massive, are key factors in the production of a hot Jupiter. Our simple model based on these factors predicts that $\sim$10\% of warm and cold Jupiter systems will by chance meet these assembly criteria, which is consistent with our measurement of $16\pm6\%$ relative occurrence of hot Jupiter systems to all giant-harboring systems. We find that these three features favor coplanar high-eccentricity migration as the dominant mechanism for hot Jupiter formation., Comment: 11 pages, 5 Figures, Accepted for Publication in ApJL

Our goal is to visualize an additional data dimension of a tree with multifaceted data through superimposition on vertical strips, which we call columns. Specifically, we extend upward drawings of unordered rooted trees where vertices have assigned heights by mapping each vertex to a column. Under an orthogonal drawing style and with every subtree within a column drawn planar, we consider different natural variants concerning the arrangement of subtrees within a column. We show that minimizing the number of crossings in such a drawing can be achieved in fixed-parameter tractable (FPT) time in the maximum vertex degree $\Delta$ for the most restrictive variant, while becoming NP-hard (even to approximate) already for a slightly relaxed variant. However, we provide an FPT algorithm in the number of crossings plus $\Delta$, and an FPT-approximation algorithm in $\Delta$ via a reduction to feedback arc set., Comment: Appears in the Proceedings of the 31st International Symposium on Graph Drawing and Network Visualization (GD 2023)

The MiniBooNE low-energy excess stands as an unexplained anomaly in short-baseline neutrino oscillation experiments. It has been shown that it can be explained in the context of dark sector models. Here, we provide an overview of the possible new-physics solutions based on electron, photon, and dilepton final states. We systematically discuss the various production mechanisms for dark particles in neutrino-nucleus scattering. Our main result is a comprehensive fit to the MiniBooNE energy spectrum in the parameter space of dark neutrino models, where short-lived heavy neutral leptons are produced in neutrino interactions and decay to $e^+e^-$ pairs inside the detector. For the first time, other experiments will be able to directly confirm or rule out dark neutrino interpretations of the MiniBooNE low-energy excess., Comment: 35 pages, 21 figures

Mass, radius, and age measurements of young (<100 Myr) planets have the power to shape our understanding of planet formation. However, young stars tend to be extremely variable in both photometry and radial velocity, which makes constraining these properties challenging. The V1298 Tau system of four ~0.5 Rjup planets transiting a pre-main sequence star presents an important, if stress-inducing, opportunity to directly observe and measure the properties of infant planets. Su\'arez-Mascare\~no et al. (2021) published radial-velocity-derived masses for two of the V1298 Tau planets using a state-of-the-art Gaussian Process regression framework. The planetary densities computed from these masses were surprisingly high, implying extremely rapid contraction after formation in tension with most existing planet formation theories. In an effort to further constrain the masses of the V1298 Tau planets, we obtained 36 RVs using Keck/HIRES, and analyzed them in concert with published RVs and photometry. Through performing a suite of cross validation tests, we found evidence that the preferred model of SM21 suffers from overfitting, defined as the inability to predict unseen data, rendering the masses unreliable. We detail several potential causes of this overfitting, many of which may be important for other RV analyses of other active stars, and recommend that additional time and resources be allocated to understanding and mitigating activity in active young stars such as V1298 Tau., Comment: 26 pages, 12 figures; published in AJ

360-degree video has become increasingly popular in content consumption. However, finding the viewing direction for important content within each frame poses a significant challenge. Existing approaches rely on either viewer input or algorithmic determination to select the viewing direction, but neither mode consistently outperforms the other in terms of content-importance. In this paper, we propose 360TripleView, the first view management system for 360-degree video that automatically infers and utilizes the better view mode for each frame, ultimately providing viewers with higher content-importance views. Through extensive experiments and a user study, we demonstrate that 360TripleView achieves over 90\% accuracy in inferring the better mode and significantly enhances content-importance compared to existing methods.

Astronomical intensity interferometry enables quantitative measurements of the source geometry by measuring the photon fluxes in individual telescopes and correlating them, rather than correlating the electromagnetic waves' amplitudes. This simplifies realization of large telescope baselines and high angular resolutions. Imaging Atmospheric Cherenkov Telescopes (IACTs), intended to detect the optical emission of $\gamma$-ray induced air showers, are excellent candidates to perform intensity correlations in the optical at reasonable signal-to-noise ratios. The detected coherence time is on the scale of $10^{-12}$ to $10^{-15}$~seconds - depending on the optical bandwidth of the measurement - which challenges the detection system to work in a stable and accurate way. We developed an intensity interferometry setup applicable to IACTs, which measures the photo currents from photomultipliers and correlates them offline, and as such is designed to handle the very large photon rates provided by the telescopes. We present measurements in the lab simulating starlight using a xenon lamp and measured at different degrees of temporal and spatial coherence. Necessary calibration procedures are described with the goal of understanding the measurements quantitatively. Measured coherence times between $5\,$femtoseconds (corresponding signal-to-background ratio $5\cdot10^{-7}$) and $110\,$femtoseconds (signal-to-background ratio $10^{-5}$) are in good agreement with expectations, and so are the noise levels in the correlations, reaching down to $6 \cdot 10^{-8}$, after measurements between $30\,$minutes and $1\,$ hour.

As dense and hot bodies with a well-understood equation of state, white dwarfs offer a unique opportunity to investigate new physics. In this paper, we examine the role of dark sectors, which are extensions of the Standard Model of particle physics that are not directly observable, in the cooling process of white dwarfs. Specifically, we examine the role of a dark photon, within the framework of a three-portal Model, in enhancing the neutrino emission during the cooling process of white dwarfs. We compare this scenario to the energy release predicted by the Standard Model. By analyzing the parameter space of dark sectors, our study aims to identify regions that could lead to significant deviations from the expected energy release of white dwarfs., Comment: 9 pages, 5 figures