Search

The idea of the present work was to investigate general features of the vertical travel of the treatment table in different configurations and the limitations of an optimised alignment. The investigations were carried out on two tables for different load cases, lateral positions and turntable angles. A wire was held vertically nearby the rotational axis of the table. The wire was used as reference in the investigations. A digital USB-microscope was attached to the tabletop. An orthogonal set of images of the wire was acquired at different vertical table positions. By analysing the images the vertical travel accuracy of the table was extracted. The two tables were found to travel linearly with the same characteristics over the full range of 110 cm with deviations less than 0.5 mm relative to a straight line. A divergence from a vertical travel above 0.5 mm was found to originate from misalignment. An alignment procedure to attain the optimal vertical performance with a minimum of inclination was presented. This procedure must be relayed on objective measured data of the travel with uncertainties far beyond 0.5 mm. Our suggested experimental method was found to have the potential to obtain the required data. [ABSTRACT FROM AUTHOR]

During the past decade planning of adjuvant radiotherapy (RT) of early breast cancer has changed from two-dimensional (2D) to 3D conformal techniques. In the planning computerised tomography (CT) scan both the targets for RT and the organs at risk (OARs) are visualised, enabling an increased focus on target dose coverage and homogeneity with only minimal dose to the OARs. To ensure uniform RT in the national prospective trials of the Danish Breast Cancer Cooperative Group (DBCG), a national consensus for the delineation of clinical target volumes (CTVs) and OARs was required. Material and methods. A CT scan of a breast cancer patient after surgical breast conservation and axillary lymph node (LN) dissection was used for delineation. During multiple dummy-runs seven experienced radiation oncologists contoured all CTVs and OARs of interest in adjuvant breast RT. Two meetings were held in the DBCG Radiotherapy Committee to discuss the contouring and to approve a final consensus. The Dice similarity coefficient (DSC) was used to evaluate the delineation agreement before and after the consensus. Results. The consensus delineations of CTVs and OARs are available online and a table is presented with a contouring description of the individual volumes. The consensus provides recommendations for target delineation in a standard patient both in case of breast conservation or mastectomy. Before the consensus, the average value of the DSC was modest for most volumes, but high for the breast CTV and the heart. After the consensus, the DSC increased for all volumes. Conclusion. The DBCG has provided the first national guidelines and a contouring atlas of CTVs and OARs definition for RT of early breast cancer. The DSC is a useful tool in quantifying the effect of the introduction of guidelines indicating improved inter-delineator agreement. This consensus will be used by the DBCG in our prospective trials. [ABSTRACT FROM AUTHOR]

Background: In radiotherapy treatments, it is crucial to monitor the performance of linac components including gantry, collimation system, and electronic portal imaging device (EPID) during arc deliveries. In this study, a simple EPID-based measurement method is suggested in conjunction with an algorithm to investigate the stability of these systems at various gantry angles with the aim of evaluating machine-related errors in treatments., Methods: The EPID sag, gantry sag, changes in source-to-detector distance (SDD), EPID and collimator skewness, EPID tilt, and the sag in leaf bank assembly due to linac rotation were separately investigated by acquisition of 37 EPID images of a simple phantom with five ball bearings at various gantry angles. A fast and robust software package was developed for automated analysis of image data. Three Siemens linacs were investigated., Results: The average EPID sag was within 1 mm for all tested linacs. Two machines showed >1 mm gantry sag. Changes in the SDD values were within 7.5 mm. EPID skewness and tilt values were <1° in all machines. The maximum sag in leaf bank assembly was <1 mm., Conclusion: The method and software developed in this study provide a simple tool for effective investigation of the behavior of Siemens linac components with gantry rotation. Such a comprehensive study has been performed for the first time on Siemens machines.