Search

To overcome challenges in the traditional melt casting process of zine alloys, such as oxidative burnout, compositional segregation, and grain coarsening, this study carried out hot compression deformation tests on Zn-0.5Mg-0.05Fe alloys prepared by powder metallurgy. The results show that increasing deformation temperature and decreasing strain rate reduce rheological stress. The hot compression deformation process exhibits three phases, as rheological stress increases, work hardening, dynamic softening, and steady-state fluidization are observed, respectively. An intrinsic equation for the hot compression process is derived as = 1.334 × 1010 × [sinh(0.0053σ)]7.62947exp(-109.931691/RT). Processing conditions for Zn-0.5Mg-0.05Fe alloy are determined from a processing map, suggesting that a safe zone of 25°C–130 °C deformation temperatures with 0.13s−1-0.36s−1 strain rates, and 120°C–200 °C deformation temperatures with 0.01s−1-0.6s−1 strain rates. Electron Back-scattering Patterns (EBSD) and Transmission Electron Microscope (TEM) results show both discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX) during the hot deformation compression process. DRX reduces deformation resistance, refines the grains, and improves the mechanical properties of the alloys. This study provides theoretical insights and process guidance for preparing degradable zinc alloys with excellent mechanical properties.

Understanding soil moisture dynamics is crucial for crop growth. The digital mapping of field soil moisture distribution provides valuable information for agricultural water management. The optical satellite data provides fine scale soil moisture information for a region. However, these data are greatly limited due to cloud contamination and revisit period. Despite the reported beneficial effects of spatiotemporal fusion methods, the accurate estimates of high-resolution soil moisture through spatiotemporal fusion data are still unclear, particularly when using Sentinel-2/3 fusion images. This study introduces a new soil moisture estimation framework integrating spatio-temporal spectral information from Sentinel-2/3 fusion images and machine learning algorithm,and thus provide spatiotemporally continuous soil moisture estimation. The framework includes four fusion methods (ESTARRFM, Fit-FC, FSDAF and STFMF) and four machine learning models (PLSR, SVM, RF and GBRT). The feasibility of the framework was validated in the Hetao Irrigation Area of Inner Mongolia, China. The results showed that the Sentinel-2/3 fused image generated by Fit-FC was visually the closest to the true image, followed by ESTARFM, FSDAF, and STFMF. The spatiotemporal fusion-machine learning estimation framework provided reliable estimation for multi-layer (0 ∼ 20, 20 ∼ 40 and 40 ∼ 60 cm) soil water in the irrigation area. The dense time series of soil water generated by the framework facilitated the detection of irrigation events in the irrigated farmland. Our findings highlighted the effectiveness of Sentinel-2/3 fused images in providing high-resolution continuous daily monitoring of farmland soil water on a large scale. These high spatial–temporal resolution time series are valuable for monitoring crop growth and water resource management, contributing to further expanding the application of satellite remote sensing in precision agriculture.

In both arid and semi-arid regions, adopting field mulching can effectively optimize soil moisture distribution, enhance crop yields, and improve water productivity. While acknowledging its advantages, field mulching seems insufficient for maintaining high crop productivity due to the increasing frequency of extreme weather. Furthermore, drought often coincides with critical crop growth stages, necessitating the implementation of agricultural irrigation to ensure normal crop growth. Accordingly, we conducted a three-year field experiment from 2021 to 2023 including three typical field mulching methods (no mulching, NM; straw mulching, SM; plastic film mulching, FM) and three supplementary irrigation strategies (irrigated at the branching stage (V4), W1; irrigated at the pod-filling stage (R2), W2; irrigated at both the V4 and R2 stage, W3). Throughout the entire growth period, we monitored soil moisture conditions for each treatment, measured leaf physiological parameters at crucial growth stages, and assessed soybean yields and water productivity (WP). Our findings indicated that, relative to SM and NM, FM maintains optimal soil moisture balance, augments chlorophyll content, and enhances photosynthesis, resulting in an average yield increase of 17.0% and 38.3% over three growing seasons. Additionally, supplementary irrigation also significantly affects the growth and seed yield of soybean. FMW2 achieved the higher seed yield (4307.5 kg ha−1, 3-year averaged), had insignificant difference with the highest seed yield of 4568.6 kg ha−1, both significantly higher than other treatments. Similarly, the leaf area index, chlorophyll content, net photosynthetic rate (Pn) and transpiration rate (Tr) also presented insignificant difference between FMW2 and FMW3, while WUEleaf (Pn/Tr) of FMW2 obviously higher than that of FMW3. As a result, FMW2 achieved the highest WP of 12.2 kg ha−1 mm−1 over the three growing seasons, compared to the three-year average of the other treatments, the increase ranges from 5.6% to 46.7%. In summary, the FMW2 treatment optimized water distribution to meet the water demands of soybeans during the reproductive growth stages, achieving a beneficial balance between soybean seed production and WP by regulating leaf functional parameters. Future research will explore more specific irrigation scheduling techniques (e.g., precision irrigation, deficit irrigation, and sensor-based irrigation management systems) while integrating innovative agricultural film materials (e.g., biodegradable films) to further enhance crop resilience and productivity under evolving climatic conditions.

By integrating the thermal characteristics from thermal-infrared remote sensing with the physiological and structural information of vegetation revealed by multispectral remote sensing, a more comprehensive assessment of the crop soil-moisture-status response can be achieved. In this study, multispectral and thermal-infrared remote-sensing data, along with soil-moisture-content (SMC) samples (0~20 cm, 20~40 cm, and 40~60 cm soil layers), were collected during the flowering stage of soybean. Data sources included vegetation indices, texture features, texture indices, and thermal-infrared vegetation indices. Spectral parameters with a significant correlation level (p < 0.01) were selected and input into the model as single- and fuse-input variables. Three machine learning methods, eXtreme Gradient Boosting (XGBoost), Random Forest (RF), and Genetic Algorithm-optimized Backpropagation Neural Network (GA-BP), were utilized to construct prediction models for soybean SMC based on the fusion of UAV multispectral and thermal-infrared remote-sensing information. The results indicated that among the single-input variables, the vegetation indices (VIs) derived from multispectral sensors had the optimal accuracy for monitoring SMC in different soil layers under soybean cultivation. The prediction accuracy was the lowest when using single-texture information, while the combination of texture feature values into new texture indices significantly improved the performance of estimating SMC. The fusion of vegetation indices (VIs), texture indices (TIs), and thermal-infrared vegetation indices (TVIs) provided a better prediction of soybean SMC. The optimal prediction model for SMC in different soil layers under soybean cultivation was constructed based on the input combination of VIs + TIs + TVIs, and XGBoost was identified as the preferred method for soybean SMC monitoring and modeling, with its R2 = 0.780, RMSE = 0.437%, and MRE = 1.667% in predicting 0~20 cm SMC. In summary, the fusion of UAV multispectral and thermal-infrared remote-sensing information has good application value in predicting SMC in different soil layers under soybean cultivation. This study can provide technical support for precise management of soybean soil moisture status using the UAV platform.

Drip fertigation (DF) is a widely used technology to increase grain yield with water and fertilizer conservation. However, the mechanism of high grain yield (GY) under DF is still unclear. Here, a four-year field experiment assessed the impacts of four treatments (i.e., conventional irrigation and nitrogen application, CK; drip irrigation with conventional nitrogen fertilization, DI; split-nitrogen fertigation with conventional irrigation, SF; and drip fertigation, DF) on maize phenology, leaf photosynthetic rates, grain filling processes, plant biomass, and GY. The results showed that DF significantly increased maize GY by affecting phenology, grain filling traits, aboveground biomass (BIO) accumulation, and translocation. Specifically, DF significantly increased leaf chlorophyll content, which enhanced leaf photosynthetic rates, and together with an increase of leaf area index, promoted BIO accumulation. As a result, the BIO at the silking stage of DF increased by 29.5%, transported biomass increased by 109.2% (1.2 t ha−1), and the accumulation of BIO after silking increased by 23.1% (1.7 t ha−1) compared with CK. Meanwhile, DF prolonged grain filling days, significantly increased the grain weight of 100 kernels, and promoted GY increase. Compared with CK, the four-year averaged GY and BIO increased by 34.3% and 26.8% under DF; a 29.7%, 46.1%, and 24.2% GY increase and a 30.7%, 39.5%, and 29.9% BIO increase were contributed by irrigation, nitrogen, and coupling effects of irrigation and nitrogen, respectively. These results reveal the high yield mechanism of drip-fertigated maize, and are of important significance for promoting the application of drip fertigation.

The leaf area index (LAI) is a crucial physiological indicator of crop growth. This paper introduces a new spectral index to overcome angle effects in estimating the LAI of crops. This study quantitatively analyzes the relationship between LAI and multi-angle hyperspectral reflectance from the canopy of winter oilseed rape (Brassica napus L.) at various growth stages, nitrogen application levels and coverage methods. The angular stability of 16 traditional vegetation indices (VIs) for monitoring the LAI was tested under nine view zenith angles (VZAs). These multi-angle VIs were input into machine learning models including support vector machine (SVM), eXtreme gradient boosting (XGBoost), and Random Forest (RF) to determine the optimal monitoring strategy. The results indicated that the back-scattering direction outperformed the vertical and forward-scattering direction in terms of monitoring the LAI. In the solar principal plane (SPP), EVI-1 and REP showed angle stability and high accuracy in monitoring the LAI. Nevertheless, this relationship was influenced by experimental conditions and growth stages. Compared with traditional VIs, the observation perspective insensitivity vegetation index (OPIVI) had the highest correlation with the LAI (r = 0.77–0.85). The linear regression model based on single-angle OPIVI was most accurate at −15° (R2 = 0.71). The LAI monitoring achieved using a multi-angle OPIVI-RF model had the higher accuracy, with an R2 of 0.77 and with a root mean square error (RMSE) of 0.38 cm2·cm−2. This study provides valuable insights for selecting VIs that overcome the angle effect in future drone and satellite applications.

Hyperspectral remote sensing technology plays a vital role in advancing modern precision agriculture due to its non-destructive and efficient nature. To achieve accurate monitoring of winter wheat chlorophyll content, this study utilized 68 sets of chlorophyll content data and hyperspectral measurements collected during the jointing stage of winter wheat over two consecutive years (2019–2020), under various fertilization types and nitrogen application levels. Continuous wavelet transform was applied to transform the original reflectance, ranging from 21 to 210, and the correlation matrix method was utilized to identify the spectral index at each scale, with the highest correlation to winter wheat chlorophyll content as the optimal spectral index combination input. Subsequently, winter wheat chlorophyll content prediction models were developed using three machine learning methods: random forest (RF), support vector machine (SVM), and a genetic algorithm-optimized backpropagation neural network (GA-BP). The results indicate that the spectral data processed through continuous wavelet transform at seven scales, from 21 to 27, show the highest correlation with winter wheat chlorophyll content at a scale of 26, with a correlation coefficient of 0.738, compared with the correlation of 0.611 of the original reflectance, and the accuracy is improved by 20.7%. The average highest correlation value between the spectral index at scale 26 and winter wheat chlorophyll content is 0.752. As the scale of wavelet transform increases, the correlation between the spectral index and winter wheat chlorophyll content and the accuracy of the predictive model show a trend of first increasing and then decreasing. The optimal input variables for predicting winter wheat chlorophyll content and the best machine learning method are the spectral data at a scale of 26 processing combined with the GA-BP model. The optimal predictive model has a validation set coefficient of determination (R2) of 0.859, root mean square error (RMSE) of 1.366, and mean relative error (MRE) of 2.920%. The results show that the prediction model can provide a technical basis for improving the hyperspectral inversion accuracy of winter wheat chlorophyll and modern precision agriculture.

Efficient acquisition of crop leaf moisture information holds significant importance for agricultural production. This information provides farmers with accurate data foundations, enabling them to implement timely and effective irrigation management strategies, thereby maximizing crop growth efficiency and yield. In this study, unmanned aerial vehicle (UAV) multispectral technology was employed. Through two consecutive years of field experiments (2021–2022), soybean (Glycine max L.) leaf moisture data and corresponding UAV multispectral images were collected. Vegetation indices, canopy texture features, and randomly extracted texture indices in combination, which exhibited strong correlations with previous studies and crop parameters, were established. By analyzing the correlation between these parameters and soybean leaf moisture, parameters with significantly correlated coefficients (p < 0.05) were selected as input variables for the model (combination 1: vegetation indices; combination 2: texture features; combination 3: randomly extracted texture indices in combination; combination 4: combination of vegetation indices, texture features, and randomly extracted texture indices). Subsequently, extreme learning machine (ELM), extreme gradient boosting (XGBoost), and back propagation neural network (BPNN) were utilized to model the leaf moisture content. The results indicated that most vegetation indices exhibited higher correlation coefficients with soybean leaf moisture compared with texture features, while randomly extracted texture indices could enhance the correlation with soybean leaf moisture to some extent. RDTI, the random combination texture index, showed the highest correlation coefficient with leaf moisture at 0.683, with the texture combination being Variance1 and Correlation5. When combination 4 (combination of vegetation indices, texture features, and randomly extracted texture indices) was utilized as the input and the XGBoost model was employed for soybean leaf moisture monitoring, the highest level was achieved in this study. The coefficient of determination (R2) of the estimation model validation set reached 0.816, with a root-mean-square error (RMSE) of 1.404 and a mean relative error (MRE) of 1.934%. This study provides a foundation for UAV multispectral monitoring of soybean leaf moisture, offering valuable insights for rapid assessment of crop growth.

Leaf chlorophyll content (LCC) is an important physiological index to evaluate the photosynthetic capacity and growth health of crops. In this investigation, the focus was placed on the chlorophyll content per unit of leaf area (LCCA) and the chlorophyll content per unit of fresh weight (LCCW) during the tuber formation phase of potatoes in Northern Shaanxi. Ground-based hyperspectral data were acquired for this purpose to formulate the vegetation index. The correlation coefficient method was used to obtain the “trilateral” parameters with the best correlation between potato LCCA and LCCW, empirical vegetation index, any two-band vegetation index constructed after 0–2 fractional differential transformation (step size 0.5), and the parameters with the highest correlation among the three spectral parameters, which were divided into four combinations as model inputs. The prediction models of potato LCCA and LCCW were constructed using the support vector machine (SVM), random forest (RF) and back propagation neural network (BPNN) algorithms. The results showed that, compared with the “trilateral” parameter and the empirical vegetation index, the spectral index constructed by the hyperspectral reflectance after differential transformation had a stronger correlation with potato LCCA and LCCW. Compared with no treatment, the correlation between spectral index and potato LCC and the prediction accuracy of the model showed a trend of decreasing after initial growth with the increase in differential order. The highest correlation index after 0–2 order differential treatment is DI, and the maximum correlation coefficients are 0.787, 0.798, 0.792, 0.788 and 0.756, respectively. The maximum value of the spectral index correlation coefficient after each order differential treatment corresponds to the red edge or near-infrared band. A comprehensive comparison shows that in the LCCA and LCCW estimation models, the RF model has the highest accuracy when combination 3 is used as the input variable. Therefore, it is more recommended to use the LCCA to estimate the chlorophyll content of crop leaves in the agricultural practices of the potato industry. The results of this study can enhance the scientific understanding and accurate simulation of potato canopy spectral information, provide a theoretical basis for the remote sensing inversion of crop growth, and promote the development of modern precision agriculture.

Objectives: Family atmosphere is a significant predictor of internet addiction in adolescents. Based on the vulnerability model of emotion and the compensatory internet use theory, this study examined whether self-esteem and negative emotions (anxiety, depression) mediated the relationship between family atmosphere and internet addiction in parallel and sequence.Methods: A total of 3,065 Chinese middle school and high school students (1,524 females, mean age = 13.63 years, SD = 4.24) participated. They provided self-reported data on demographic variables, family atmosphere, self-esteem, anxiety, depression, and internet addiction through the Scale of Systemic Family Dynamic, Self-Esteem Scale, Self-Rating Anxiety Scale, Self-Rating Depression Scale, and Internet Addiction Test, respectively. We employed Hayes PROCESS macro for the SPSS program to scrutinize the suggested mediation model.Results: It revealed that self-esteem, anxiety, and depression mediated the relationship between family atmosphere and internet addiction in parallel and sequence. The pathway of family atmosphere-self-esteem-internet addiction played a more important role than others.Conclusion: The present study confirmed the mediating role of self-esteem and negative emotions between family atmosphere and internet addiction, providing intervention studies with important targeting factors.

Applying hyperspectral remote sensing technology to the prediction of soil moisture content (SMC) during the growth stage of soybean emerges as an effective approach, imperative for advancing the development of modern precision agriculture. This investigation focuses on SMC during the flowering stage under varying nitrogen application levels and film mulching treatments. The soybean canopy’s original hyperspectral data, acquired at the flowering stage, underwent 0–2-order differential transformation (with a step size of 0.5). Five spectral indices exhibiting the highest correlation with SMC were identified as optimal inputs. Three machine learning methods, namely support vector machine (SVM), random forest (RF), and back propagation neural network (BPNN), were employed to formulate the SMC prediction model. The results indicate the following: (1) The correlation between the optimal spectral index of each order, obtained after fractional differential transformation, and SMC significantly improved compared to the original hyperspectral reflectance data. The average correlation coefficient between each spectral index and SMC under the 1.5-order treatment was 0.380% higher than that of the original spectral index, with mNDI showing the highest correlation coefficient at 0.766. (2) In instances of utilizing the same modeling method with different input variables, the SMC prediction model’s accuracy follows the order: 1.5 order > 2.0 order > 1.0 order > 0.5 order > original order. Conversely, with consistent input variables and a change in the modeling method, the accuracy order becomes RF > SVM > BPNN. When comprehensively assessing model evaluation indicators, the 1.5-order differential method and RF method emerge as the preferred order differential method and model construction method, respectively. The R2 for the optimal SMC estimation model in the modeling set and validation set were 0.912 and 0.792, RMSEs were 0.005 and 0.004, and MREs were 2.390% and 2.380%, respectively. This study lays the groundwork for future applications of hyperspectral remote sensing technology in developing soil moisture content estimation models for various crop growth stages and sparks discussions on enhancing the accuracy of these different soil moisture content estimation models.

Affected by stagnant and transmission air pollution, Regional pollution day (RPD) frequently occurs in Twain-Hu Basin. In the winter halfaear of 2015–2021 (November to March of following year), the Regional pollution days reached 331 days. A variety of weather systems together lead to regional air pollution. Based on the observation data of PM2.5 concentration and multi-source meteorological elements during the study period, the weather types of Regional pollution days in Twain-Hu Basin can be divided into four types by using the T-model (T-PCA) classification method, namely, uniform pressure field (42 days), front of cold high-pressure bottom (180 days), back of high-pressure (81 days), and low pressure with an inverted trough field (28 days). Under the influence of uniform pressure field and front of cold high-pressure bottom, it shows the meteorological characteristics of static pollution and transmission pollution, respectively. A stable index (STI) is constructed to describe the PM2.5 pollution caused by the stagnant weather, and a transport index (TRI) is constructed to describe the PM2.5 pollution caused by the transport weather. They have a satisfactory evaluation effect on PM2.5 pollution under the influence of uniform pressure field and front of cold high-pressure bottom, respectively. Interestingly, the correlation coefficients between the pollution index (A stable index + transport index) and PM2.5 concentration could increase obviously to 0.48–0.71 when A stable index and transport index are considered comprehensively. Furthermore, the validation in the winter halfaear of 2021/2022 show that the correlation coefficient of most stations is above 0.70. Therefore, satisfactory performance in validation suggests that this index construction method can be well applied to regional pollution assessment in Twain-Hu Basin.

In this work, a two-stage activation method was used to prepare adsorbents from scrap tire rubber. Firstly, KOH was mixed with rubber using different impregnation ratios (1–2) for primary activation; a second activation was performed after pyrolysis at 650°C and 750°C; and finally, the samples were acid-washed using HNO3. The prepared materials were characterized by elemental analysis, nitrogen adsorption isotherms, SEM, FTIR, and XPS. The adsorption capacity and mechanism of these materials on p-nitrophenol in wastewater were also investigated. It was found that after two-stage activation, the specific surface area of the materials can be effectively increased, and the surface of the materials can be enriched with oxygen-containing functional groups. The maximum adsorption capacity of PNP could reach 143.9 mg g−1, which is slightly higher than the literature data under the same conditions. The adsorption process is in the form of chemisorption and is dominated by hydrogen bonding and π-πEDA formation, but the adsorption tends to be monolayer, and the adsorption behavior can be described by a proposed secondary model. In addition, the adsorbent has a stronger adsorption capacity under acidic conditions.

Chlorophyll is an important component of crop photosynthesis as it is necessary for the material exchange between crops and the atmosphere. The amount of chlorophyll present reflects the growth and health status of crops. Spectral technology is a feasible method for obtaining crop chlorophyll content. The first-order differential spectral index contains sufficient spectral information related to the chlorophyll content and has a high chlorophyll prediction ability. Therefore, in this study, the hyperspectral index data and chlorophyll content of soybean canopy leaves at different growth stages were obtained. The first-order differential transformation of soybean canopy hyperspectral reflectance data was performed, and five indices, highly correlated with soybean chlorophyll content at each growth stage, were selected as the optimal spectral index input. Four groups of model input variables were divided according to the following four growth stages: four-node (V4), full-bloom (R2), full-fruit (R4), and seed-filling stage (R6). Three machine learning methods, support vector machine (SVM), random forest (RF), and back propagation neural network (BPNN) were used to establish an inversion model of chlorophyll content at different soybean growth stages. The model was then verified. The results showed that the correlation coefficient between the optimal spectral index and chlorophyll content of soybean was above 0.5, the R2 period correlation coefficient was above 0.7, and the R4 period correlation coefficient was above 0.8. The optimal estimation model of soybean and chlorophyll content is established through the combination of the first-order differential spectral index and RF during the R4 period. The optimal estimation model validation set determination coefficient (R2) was 0.854, the root mean square error (RMSE) was 2.627, and the mean relative error (MRE) was 4.669, demonstrating high model accuracy. The results of this study can provide a theoretical basis for monitoring the growth and health of soybean crops at different growth stages.

In dryland agriculture, mulching methods and nitrogen application have been extensively adopted to improve water and nitrogen use efficiency and increase crop yield. However, there has been a scarcity of research on the combined effects of mulching types and nitrogen application on the growth and yield of soybean (Glycine max L.). In the present study, four nitrogen levels (N0: 0 kg N ha−1, N1: 60 kg N ha−1, N2: 120 kg N ha−1, N3: 180 kg N ha−1) and four mulching methods (NM: no mulching, SM: straw mulching, FM: film mulching, SFM: straw and film mulching) were set so as to evaluate the effects of mulching methods and nitrogen application on dry matter accumulation, grain yield, water-nitrogen use efficiency, and economic benefits of soybean in Northwest China from 2021 to 2022. The results show that the dry matter accumulation, yield formation, water and nitrogen use efficiency, and economic benefits of soybean were improved under different mulching methods (SM, FM, and SFM) and nitrogen applications (N1-N3), and that the effect is the best when the nitrogen application rate is N2 and the mulching method is FM. As such, a conclusion could be drawn that suitable nitrogen application (120 kg ha−1) combined with film mulching was beneficial for the utilization of rainwater resources and soybean production in the dryland of Northwest China.

Leaf area index (LAI) and above-ground biomass are both vital indicators for evaluating crop growth and development, while rapid and non-destructive estimation of crop LAI and above-ground biomass is of considerable significance for crop field management. Owing to the advantages of repeatable and high-throughput observations, spectral technology provides a feasible method for obtaining LAI and above-ground biomass of crops. In the present study, the spectral, LAI and above-ground biomass data of winter wheat were collected, and 7 species (14 in total) were calculated based on the original and first-order differential spectrum correlation spectral indices with LAI. Then, the correlation matrix method was used for correlation with LAI. The optimal wavelength combination was extracted, and the results were calculated as the optimal spectral index related to LAI. The calculation process of the optimal spectral index related to above-ground biomass was the same as that aforementioned. Finally, the optimal spectral index was divided into three groups of model input variables, winter wheat LAI and above-ground biomass estimation models were constructed using support vector machine (SVM), random forest (RF) and a back propagation neural network (BPNN), and the models were verified. The results show that the correlation coefficient between the highest of the optimal spectral indices, the LAI, and the above-ground biomass of winter wheat exceeded 0.6, and the correlation was good. The methods for establishing the optimal estimation models for LAI and above-ground biomass of winter wheat are all modeling methods in which the input variables are the combination of the first-order differential spectral index (combination 2) and RF. The R2 of the LAI estimation model validation set was 0.830, the RMSE was 0.276, and the MRE was 6.920; the R2 of the above-ground biomass estimation model validation set was 0.682, RMSE was 235.016, MRE was 4.336, and the accuracies of both models were high. The present research results can provide a theoretical basis for crop monitoring based on spectral technology and provide an application reference for the rapid estimation of crop growth parameters.

Breast cancer is the most common malignancy in women and is a molecularly heterogeneous disease. Signal transducer and activator of transcription 3 (Stat3) is overexpressed and hyperactivated in a variety of human tumours, including breast cancer, thus representing a promising target for breast cancer treatment. In the present study, we evaluated the activities of a novel Stat3 inhibitor named Statmp-151 in the human breast cancer cell lines MCF-7 and MDA-MB-231 and the murine mammary carcinoma cell line 4T1. The in vitro results showed that Statmp-151 inhibited the proliferation of breast cancer cell lines in a dose- and time-dependent manner and suppressed the phosphorylation of Stat3 in a dose-dependent manner. Flow cytometry (FCM) assays revealed that Statmp-151 affected mitochondrial membrane potential and reactive oxygen species (ROS) production. Furthermore, Statmp-151 inhibited cell migration, as shown by analysis of the matrix metalloproteinases MMP2 and MMP9. Finally, in a 4T1 tumour-bearing mouse model, intraperitoneal injection of 30 mg/kg/day Statmp-151 significantly suppressed the growth of tumours without obvious toxicity. These results indicated that Statmp-151 might be a potential candidate for the treatment of breast cancer.

The dataset presented in this article is the supplementary data for the research article Fang et al., 2019 [1] and provided detailed data profile to support that sludge is an effective NOX reducing agent, as reductive gas components produce during sludge combustion. The instantaneous concentrations of the main gaseous products during sludge combustion were detected by using Fourier transform infrared spectroscopy (FTIR, DX-4000, Gasmet Technologies). The results showed the distribution and concentration level of gaseous products during sludge combustion and evidenced the feasibility of using sludge as a deNOX agent in cement industry. Keywords: Sludge, Gaseous products, Combustion, Cement industry

The plants of the genus Schisandra of the Schisandraceae family include the genus Schisandra and the genus Kadsura. In recent years, many kinds of triterpenoids have been isolated from the plants of genus Schisandra. Triterpenoids have attracted the attention of phytochemists and pharmacologists because they have novel skeletons and good anti-HIV, immunosuppressive and anti-tumor activities. This study provides an overview of the triterpenoids from the genus Schisandra and their biological activities. [ABSTRACT FROM AUTHOR]