Search

First-of-its--kind results are seen from three-dimensional transmission electron microscopy (3D-Tem), effectuated by multiple imaging of a sample combined with image analysis to obtain 3D information with zeolite materials. Virtual cross-sections of the 3D reconstruction of an acid-leached mordenite show the three-dimensional mesoporous channel system (3-20 nm in diameter) is observed with much clarity and definition.

Vitreous cryo-section-induced compression influences the interpretation and the reliability of electron microscopy images and tomographic reconstructions. Previous studies of this deformation have been focused at the cellular level where considerable compression occurs, yet the degree of possible intracellular macromolecular deformation has remained unclear. Here, electron cryo-tomographic reconstructions of vitreous cryo-sections show that 80S ribosomes, both intracellular and in an isolated state, appear able to resist section-induced compression. Our observations indicate that vitreous section-induced compression is non-uniform between whole cells that have been sectioned and their intracellular macromolecular complexes. We conclude that electron cryo-tomography of vitreous cryo-sections, in spite of section-induced compression, is a suitable technique for charting the structural organization of cellular nanomachines, such as ribosomes, in a cellular environment., (Copyright © 2010 Elsevier Inc. All rights reserved.)

We studied the formation of locally coated sub-10-nm nanopores fabricated by ion-beam milling and ion-beam-induced deposition (IBID) in a thin silicon nitride membrane. Two typical precursor gases representing conductive ((CH(3))(3)Pt(CpCH(3)), CPC for short) and insulating (tetra ethyl oxysilane, TEOS for short) material deposition are used. Three-dimensional electron tomography, EDX and EELS analysis are used to measure the changes in chemical composition and shape of the pores after their formation and at various stages of pore shrinkage. The formation and shrinkage are shown to be due to a shifting competition between IBID and material sputtering during ion-beam exposure. The chemical distribution at the rim of the nanopore is dependent on the precursor gases used: CPC forms a thin carbon layer with small embedded Pt particles at the top and inner surfaces of the nanopore, whereas TEOS forms SiO(x)C(y) with Ga particles dispersed at the rim of the nanopore., ((c) 2010 Elsevier Ltd. All rights reserved.)

Solid-state nanopores fabricated by a high-intensity electron beam in ceramic membranes can be fine-tuned on three-dimensional geometry and composition by choice of materials and beam sculpting conditions. For similar beam conditions, 8 nm diameter nanopores fabricated in membranes containing SiO(2) show large depletion areas (70 nm in radius) with small sidewall angles (55 degrees ), whereas those made in SiN membranes show small depletion areas (40 nm) with larger sidewall angles (75 degrees ). Three-dimensional electron tomograms of nanopores fabricated in a SiO(2)/SiN/SiO(2) membrane show a biconical shape with symmetric top and bottom and indicate a mixing of SiN and SiO(2) layers up to 30 nm from the edge of nanopore, with Si-rich particles throughout the membrane. Electron-energy-loss spectroscopy (EELS) reveals that the oxygen/nitrogen ratio near the pore depends on the beam sculpting conditions.

The senses of hearing and balance rest upon mechanoelectrical transduction by the hair bundles of hair cells in the inner ear. Located at the apical cellular surface, each hair bundle comprises several tens of stereocilia and a single kinocilium that are interconnected by extracellular proteinaceous links. Using electron-microscopic tomography of bullfrog saccular sensory epithelia, we examined the three-dimensional structures of basal links, kinociliary links, and tip links. We observed significant differences in the appearances and dimensions of these three structures and found two distinct populations of tip links suggestive of the involvement of different proteins, splice variants, or protein-protein interactions. We noted auxiliary links connecting the upper portions of tip links to the taller stereocilia. Tip links and auxiliary links show a tendency to adopt a globular conformation when disconnected from the membrane surface.

Hollow zeolite architectures on different length scales have been obtained upon controlled desilication of Al-zoned ZSM-5 zeolites in alkaline medium. The hollow ZSM-5 crystals possess a functional Al-rich exterior and a tunable internal porosity and accessibility.

The localization of scarce antigens in thin sections of biological material can be accomplished by pre-embedment labeling with ultrasmall immuno-gold labels. Moreover, with this method, labeling is not restricted to the section surface but occurs throughout the section volume. Thus, when combined with electron tomography, antigens can be localized in three dimensions in relation to the 3D (three-dimensional) ultrastructure of the cell. However, for visualization in a transmission electron microscope, these labels need to be enlarged by silver or gold enhancement. The increase in particle size reduces the resolution of the antigen detection and the large particles obscure ultrastructural details in the tomogram. In this paper we show for the first time that these problems can be avoided and that ultrasmall gold labels can be localized in three dimensions without the need for gold or silver enhancement by using HAADF-STEM (high angular annular dark-field-scanning transmission electron microscopy) tomography. This method allowed us to three-dimensionally localize Aurion ultrasmall goat anti-rabbit immuno-gold labels on sections of Epon-embedded, osmium-uranium-lead-stained biological material. Calculations show that a 3D reconstruction obtained from HAADF-STEM projection images can be spatially aligned to one obtained from transmission electron microscopy (TEM) projections with subpixel accuracy. We conclude that it is possible to combine the high-fidelity structural information of TEM tomograms with the ultrasmall label localization ability of HAADF-STEM tomograms.

The ability of the cornea to transmit light while being mechanically resilient is directly attributable to the formation of an extracellular matrix containing orthogonal sheets of collagen fibrils. The detailed structure of the fibrils and how this structure underpins the mechanical properties and organization of the cornea is understood poorly. In this study, we used automated electron tomography to study the three-dimensional organization of molecules in corneal collagen fibrils. The reconstructions show that the collagen molecules in the 36-nm diameter collagen fibrils are organized into microfibrils (approximately 4-nm diameter) that are tilted by approximately 15 degrees to the fibril long axis in a right-handed helix. An unexpected finding was that the microfibrils exhibit a constant-tilt angle independent of radial position within the fibril. This feature suggests that microfibrils in concentric layers are not always parallel to each other and cannot retain the same neighbors between layers. Analysis of the lateral structure shows that the microfibrils exhibit regions of order and disorder within the 67-nm axial repeat of collagen fibrils. Furthermore, the microfibrils are ordered at three specific regions of the axial repeat of collagen fibrils that correspond to the N- and C-telopeptides and the d-band of the gap zone. The reconstructions also show macromolecules binding to the fibril surface at sites that correspond precisely to where the microfibrils are most orderly.

We propose a new model for the alignment of fibrillin molecules within fibrillin microfibrils. Automated electron tomography was used to generate three-dimensional microfibril reconstructions to 18.6-A resolution, which revealed many new organizational details of untensioned microfibrils, including heart-shaped beads from which two arms emerge, and interbead diameter variation. Antibody epitope mapping of untensioned microfibrils revealed the juxtaposition of epitopes at the COOH terminus and near the proline-rich region, and of two internal epitopes that would be 42-nm apart in unfolded molecules, which infers intramolecular folding. Colloidal gold binds microfibrils in the absence of antibody. Comparison of colloidal gold and antibody binding sites in untensioned microfibrils and those extended in vitro, and immunofluorescence studies of fibrillin deposition in cell layers, indicate conformation changes and intramolecular folding. Mass mapping shows that, in solution, microfibrils with periodicities of <70 and >140 nm are stable, but periodicities of approximately 100 nm are rare. Microfibrils comprise two in-register filaments with a longitudinal symmetry axis, with eight fibrillin molecules in cross section. We present a model of fibrillin alignment that fits all the data and indicates that microfibril extensibility follows conformation-dependent maturation from an initial head-to-tail alignment to a stable approximately one-third staggered arrangement.

We describe a novel virus, SNDV (Sulfolobus neozealandicus droplet-shaped virus), of the crenarchaeotal archaeon Sulfolobus, which was found in a carrier state in a Sulfolobus strain isolated from a field sample from New Zealand. SNDV particles are droplet-shaped and densely covered by thin tail fibers at their pointed ends. The virion consists of a core and a coat. The latter has the appearance of a beehive and has a surface that is either helically ribbed or a stack of hoops. The genome is cccDNA of 20 kb, which is modified by dam-like methylation. It is cleaved by only a few type II restriction enzymes e.g., DpnI but not MboI, demonstrating an N(6)-methylation of the adenine residue in GATC sequences. The DNA-modifying system differentiates between virus and host. We postulate a virus-encoded methylase that is active on hemimethylated DNA. The host range of SNDV is confined to few Sulfolobus strains from New Zealand. The virus persists in an unstable carrier state rather than as a prophage. Due to its uniqueness we propose to assign it to a novel virus family termed Guttaviridae., (Copyright 2000 Academic Press.)

Dolipore septa and septal pore caps (SPCs) in filamentous basidiomycetes may play an important role in maintaining the integrity of hyphal cells. We have investigated the ultrastructure of the dolipore septum and the SPC in Rhizoctonia solani hyphal cells after high-pressure freezing, freeze substitution, and Spurr embedding. We visualized the SPC with associated cell ultrastructures in three dimensions by automated electron tomography of thick-sectioned cells, followed by 3D tomographic reconstructions. Using these methods we were able to document the passage of mitochondria through the SPC, small tubular membranous structures at the entrance of the septal pore channel, filamentous structures connecting the inner side of the SPC with pore-plugging material, thin filaments anchoring the pore-plugging material with the plasma membrane, small vesicles attached to the plugging material, and tubular endoplasmic reticulum continuous with the base of the SPC. We hypothesize that the SPC, the filamentous structures, the plugging material, and the endoplasmic reticulum act in a coordinated fashion to maintain cellular integrity, intercellular communication, and the transport of solutes and cell organelles in the filamentous fungus R. solani., (Copyright 2000 Academic Press.)

We describe a novel lipothrixvirus, SIFV, of the crenarchaeotal archaeon Sulfolobus islandicus. SIFV (S. islandicus filamentous virus) has a linear virion with a linear double-stranded DNA genome. These two features coincide in several crenarchaeotal but not in any other viruses. The SIFV core is formed by a zipper-like array of DNA-associated protein subunits and is covered by a lipid envelope containing host lipids. We sequenced approximately 96% of the virus genome excepting the DNA termini, which were modified in an unusual, yet uncharacterized, manner. Both, the 5' and the 3' DNA termini were insensitive to enzymatic degradation and labelling. Two open reading frames (ORFs) of the SIFV genome are likely to encode helicases and resemble uncharacterized ORFs from other archaea in sequence. Three ORFs showed sequence similarity with each other and each contained a glycosyl transferase motif. Another ORF of the SIFV genome showed significant sequence similarity to the ORF a291 from the well characterized, spindle-shaped Sulfolobus virus SSV1. Due to its structure, SIFV is classified as a lipothrixvirus., (Copyright 2000 Academic Press.)

The Pseudomonas secretin XcpQ forms an oligomeric complex, which is involved in the translocation of proteins across the outer membrane via the type II secretion pathway. Pseudomonas aeruginosa produces only small amounts of this complex, 50 to 100 copies per bacterium, and overexpression is lethal to these cells. However, overexpression of Pseudomonas alcaligenes XcpQ could be achieved in the P. alcaligenes mutant strain 537. Protease protection experiments with P. alcaligenes XcpQ showed that the C-terminal domain of XcpQ, which is conserved in all the different members of the secretin family, is largely resistant to proteinase K. This protease-resistant fragment is embedded in the membrane and remains a stable complex, indicating that this domain is involved in complex formation. Both the intact and the protease-protected XcpQ complex showed a tendency to form two-dimensional crystal-like structures. Electron microscopic analysis of these structures showed that the overall oligomeric rings of the intact and of the protease-resistant complex are highly similar. The central cavity of the intact XcpQ complex contains structured mass. Both the intact and the protease-protected XcpQ complex showed pore-forming activity in planar lipid bilayers, consistent with their role as a translocation channel. However, the single-channel conductances observed were not uniform. Together, these results demonstrate that the C-terminal secretin homology domain of XcpQ is the structural domain that forms the channel through which macromolecules are being transported., (Copyright 1999 Academic Press.)

The unenveloped, stiff-rod-shaped, linear double-stranded DNA viruses SIRV1 and SIRV2 from Icelandic Sulfolobus isolates form a novel virus family, the Rudiviridae. The sizes of the genomes are 32. 3 kbp for SIRV1 and 35.8 kbp for SIRV2. The virions consist of a tube-like superhelix formed by the DNA and a single basic 15.8-kD DNA-binding protein. The tube carries a plug and three tail fibers at each end. One turn of the DNA-protein superhelix measures 4.3 nm and comprises 16.5 turns of B DNA. The linear DNA molecules appear to have covalently closed hairpin ends. The viruses are not lytic and are present in their original hosts in carrier states. Both viruses are quite stable in these carrier states. In several laboratory hosts SIRV2 was invariant, but SIRV1 formed many different variants that completely replaced the wild-type virus. Some of these variants were still variable, whereas others were stable. Up to 10% nucleotide substitution was found between corresponding genome fragments of three variants. Some variants showed deletions. Wild-type SIRV1, but not SIRV2, induces an SOS-like response in Sulfolobus. We propose that wild-type SIRV1 is unable to propagate in some hosts but surmounts this host range barrier by inducing a host response effecting extensive variation of the viral genome.

Gas vesicle formation in halophilic archaea is encoded by a DNA region (the vac region) containing 14 different genes: gvpACNO and gvpDEFGHIJKLM. In Halobacterium salinarum PHH1 (which expresses the p-vac region from plasmid pHH1), gas vesicles are spindle shaped, whereas predominantly cylindrical gas vesicles are synthesized by the chromosomal c-vac region of H. salinarum PHH4 and the single chromosomal mc-vac region of Haloferax mediterranei. Homologous complementation of gvp gene clusters derived from the chromosomal c-vac region led to cylindrical gas vesicles in transformants and proved that the activity of the c-gvpA promoter depended on a gene product from the c-gvpE-M DNA region. Heterologous complementation experiments with transcription units of different vac regions demonstrated that the formation of chimeric gas vesicles was possible. Comparison of micrographs of wild-type and chimeric gas vesicles indicated that the shape was not exclusively determined by GvpA, the major structural protein of the gas vesicle wall. More likely, a dynamic equilibrium of several gvp gene products was responsible for determination of the shape. Transmission electron microscopy of frozen hydrated, wild-type gas vesicles showed moiré patterns due to the superposition of the front and back parts of the ribbed gas vesicle envelope. Comparison of projections of model helices with the moiré pattern seen on the cylindrical part of the gas vesicles provided evidence that the ribs formed a helix of low pitch and not a stack of hoops.