Search

Electrocatalytic reduction of CO2 into C2 products of high economic value provides a promising strategy to realize resourceful CO2 utilization. Rational design and construct dual sites to realize the CO protonation and C−C coupling to unravel their structure‐performance correlation is of great significance in catalysing electrochemical CO2 reduction reactions. Herein, Cu−Cu dual sites with different site distance coordinated by halogen at the first‐shell are constructed and shows a higher intramolecular electron redispersion and coordination symmetry configurations. The long‐range Cu−Cu (Cu−I−Cu) dual sites show an enhanced Faraday efficiency of C2 products, up to 74.1 %, and excellent stability. In addition, the linear relationships that the long‐range Cu−Cu dual sites are accelerated to C2H4 generation and short‐range Cu−Cu (Cu−Cl−Cu) dual sites are beneficial for C2H5OH formation are disclosed. In situ electrochemical attenuated total reflection surface enhanced infrared absorption spectroscopy, in situ Raman and theoretical calculations manifest that long‐range Cu−Cu dual sites can weaken reaction energy barriers of CO hydrogenation and C−C coupling, as well as accelerating deoxygenation of *CH2CHO. This study uncovers the exploitation of site‐distance‐dependent electrochemical properties to steer the CO2 reduction pathway, as well as a potential generic tactic to target C2 synthesis by constructing the desired Cu−Cu dual sites. [ABSTRACT FROM AUTHOR]

The production of ammonia (NH3) from nitrogen sources involves competitive adsorption of different intermediates and multiple electron and proton transfers, presenting grand challenges in catalyst design. In nature nitrogenases reduce dinitrogen to NH3 using two component proteins, in which electrons and protons are delivered from Fe protein to the active site in MoFe protein for transfer to the bound N2. We draw inspiration from this structural enzymology, and design a two‐component metal–sulfur–carbon (M−S−C) catalyst composed of sulfur‐doped carbon‐supported ruthenium (Ru) single atoms (SAs) and nanoparticles (NPs) for the electrochemical reduction of nitrate (NO3−) to NH3. The catalyst demonstrates a remarkable NH3 yield rate of ~37 mg L−1 h−1 and a Faradaic efficiency of ~97 % for over 200 hours, outperforming those consisting solely of SAs or NPs, and even surpassing most reported electrocatalysts. Our experimental and theoretical investigations reveal the critical role of Ru SAs with the coordination of S in promoting the formation of the HONO intermediate and the subsequent reduction reaction over the NP‐surface nearby. Such process results in a more energetically accessible pathway for NO3− reduction on Ru NPs co‐existing with SAs. This study proves a better understanding of how M−S−Cs act as a synthetic nitrogenase mimic during ammonia synthesis, and contributes to the future mechanism‐based catalyst design. [ABSTRACT FROM AUTHOR]

Electrochemical nitrate reduction method (NitRR) is a low‐carbon, environmentally friendly, and efficient method for synthesizing ammonia, which has received widespread attention in recent years. Copper‐based catalysts have a leading edge in nitrate reduction due to their good adsorption of *NO3. However, the formation of active hydrogen (*H) on Cu surfaces is difficult and insufficient, resulting in a large amount of the by‐product NO2−. In this work, Pd single atoms suspended on the interlayer unsaturated bonds of CuO atoms formed due to dislocations (Pd−CuO) were prepared by low temperature treatment, and the Pd single atoms located on the dislocations were subjected to shear stress and the dynamic effect of support formation to promote the conversion of nitrate into ammonia. The catalysis had an ammonia yield of 4.2 mol. gcat−1. h−1, and a Faraday efficiency of 90 % for ammonia production at −0.5 V vs. RHE. Electrochemical in situ characterization and theoretical calculations indicate that the dynamic effects of Pd single atoms and carriers under shear stress obviously promote the production of active hydrogen, reduce the reaction energy barrier of the decision‐making step for nitrate conversion to ammonia, further promote ammonia generation. [ABSTRACT FROM AUTHOR]

The manipulation of surface catalytic sites has rarely been explored for metal borides, and the subsurface effects on the electrocatalytic activity of the nitrogen reduction reaction (NRR) remain unknown. Herein, this work develops a core–shell nanoparticle catalyst with a Pd core that ensures high electron transfer rates and an Pd16B3 atomical shell that possess tunable active sites for regulating the NRR. The atomic structural evolution from Pd to Pd16B3 is investigated by precisely controlling the B atom diffusion, molecular rearrangement, and d–sp orbital hybridization. Pd/Pd16B3 core–shell nanocrystals exhibit an exceptional NRR performance with a high NH3 Faradaic efficiency of 30.8%, which is superior to those of pristine Pd (1.2%) and B‐doped Pd (4.8%) under identical conditions, and a yield rate of 0.81 µmol h−1 cm−2. This work discovers that the Pd16B3 shell could promote the NRR selectivity by separating the separating the hydrogen evolution reaction proceeded on hole sites and NRR proceeded on bridge sites, and the Pd core could provide the excellent conductivity to Pd16B3 shell through regulated electron interactions. Consequently, the controlled chemical ordering of palladium boride on palladium surfaces provides insight into the synthesis of advanced NRR electrocatalysts. [ABSTRACT FROM AUTHOR]

Directly coupling N2 and CO2 to synthesize urea by photocatalysis paves a sustainable route for urea synthesis, but its performance is limited by the competition of photogenerated electrons between N2 and CO2, as well as the underutilized photogenerated holes. Herein, we report an efficient urea synthesis process involving photogenerated electrons and holes in respectively converting CO2 and N2 over a redox heterojunction consisting of WO3 and Ni single‐atom‐decorated CdS (Ni1‐CdS/WO3). For the photocatalytic urea synthesis from N2 and CO2 in pure water, Ni1‐CdS/WO3 attained a urea yield rate of 78 μM h−1 and an apparent quantum yield of 0.15 % at 385 nm, which ranked among the best photocatalytic urea synthesis performance reported. Mechanistic studies reveal that the N2 was converted into NO species by ⋅OH radicals generated from photogenerated holes over the WO3 component, meanwhile, the CO2 was transformed into *CO species over the Ni site by photogenerated electrons. The generated NO and *CO species were further coupled to form *OCNO intermediate, then gradually transformed into urea. This work emphasizes the importance of reasonably utilizing photogenerated holes in photocatalytic reduction reactions. [ABSTRACT FROM AUTHOR]

Directly coupling N2 and CO2 to synthesize urea by photocatalysis paves a sustainable route for urea synthesis, but its performance is limited by the competition of photogenerated electrons between N2 and CO2, as well as the underutilized photogenerated holes. Herein, we report an efficient urea synthesis process involving photogenerated electrons and holes in respectively converting CO2 and N2 over a redox heterojunction consisting of WO3 and Ni single‐atom‐decorated CdS (Ni1‐CdS/WO3). For the photocatalytic urea synthesis from N2 and CO2 in pure water, Ni1‐CdS/WO3 attained a urea yield rate of 78 μM h−1 and an apparent quantum yield of 0.15 % at 385 nm, which ranked among the best photocatalytic urea synthesis performance reported. Mechanistic studies reveal that the N2 was converted into NO species by ⋅OH radicals generated from photogenerated holes over the WO3 component, meanwhile, the CO2 was transformed into *CO species over the Ni site by photogenerated electrons. The generated NO and *CO species were further coupled to form *OCNO intermediate, then gradually transformed into urea. This work emphasizes the importance of reasonably utilizing photogenerated holes in photocatalytic reduction reactions. [ABSTRACT FROM AUTHOR]

Precise design and synthesis of sub-nano scale catalysts with controllable electronic and geometric structures are pivotal for enhancing the hydrogen evolution reaction (HER) performance of molybdenum sulfide (MoS2) and unraveling its structure-activity relationship. By leveraging transition molybdenum polysulfide clusters as functional units for multi-level ordering, we successfully designed and synthesized MoSx nanowire networks derived from [Mo3S13]2− clusters via evaporation-induced self-assembly, which exhibit enhanced HER activity attributed to a high density of active sites and dynamic evolution behavior under cathodic potentials. MoSx nanowire networks electrode yields a current density of 100 mA·cm−2 at 142 mV in 0.5 M H2SO4. This work provides an attractive prospect for optimizing catalysts at the sub-nano scale and offers insights into a strategy for designing catalysts in various gas evolution reactions. [ABSTRACT FROM AUTHOR]

Electrochemical C−N coupling reaction based on carbon dioxide and nitrate have been emerged as a new "green synthetic strategy" for the synthesis of urea, but the catalytic efficiency is seriously restricted by the inherent scaling relations of adsorption energies of the active sites, the improvement of catalytic activity is frequently accompanied by the decrease in selectivity. Herein, a doping engineering strategy was proposed to break the scaling relationship of intermediate binding and minimize the kinetic barrier of C−N coupling. A thus designed SrCo0.39Ru0.61O3−δ catalyst achieves a urea yield rate of 1522 μg h−1 mgcat.−1 and faradic efficiency of 34.1 % at −0.7 V versus reversible hydrogen electrode. A series of characterizations revealed that Co doping not only induces lattice distortion but also creates rich oxygen vacancies (OV) in the SrRuO3. The oxygen vacancies weaken the adsorption of *CO and *NH2 intermediates on the Co and Ru sites respectively, and the strain effects over the Co−Ru dual sites promoting the occurrence of C−N coupling of the two monomers instead of selective hydrogenating to form by‐products. This work presents an insight into molecular coupling reactions towards urea synthesis via the doping engineering on SrRuO3. [ABSTRACT FROM AUTHOR]