Search

Medium-voltage back-to-back (MVB2B) converters can connect two distribution systems and quantifiably transfer power between them. This function can enable the MVB2B converter to exchange distributed energy resource (DER)-generated power between two systems and bring significant value to enhancing distribution system DER adoption. Our previous work analyzed and demonstrated the value the MVB2B converter can bring to DER integration. As continuous work, this paper presents a methodology that helps address the MVB2B converter sizing and location selection problem in distribution systems with high DER penetrations. The proposed methodology aims to address three critical problems for MVB2B converter implementation in the real world: 1) which distribution systems are better to be connected, 2) what converter size is appropriate for connecting the distribution systems, and 3) where the optimal connection points are in the systems for connecting the MVB2B converter. The proposed methodology has been demonstrated by case studies that include various scenarios involving distribution systems with different dominated load types and high photovoltaic penetrations.

Distribution system residential load modeling and analysis for different geographic areas within a utility or an independent system operator territory are critical for enabling small-scale, aggregated distributed energy resources to participate in grid services under Federal Energy Regulatory Commission Order No. 2222 [1]. In this study, we develop a methodology of modeling residential load profiles in different geographic areas with a focus on human behavior impact. First, we construct a behavior-based load profile model leveraging state-of-the-art appliance models. We simulate human activity and occupancy using Markov chain Monte Carlo methods calibrated with the American Time Use Survey data set. Second, we link our model with cleaned Current Population Survey data from the U.S. Census Bureau. Finally, we populate two sets of 500 households using California and Texas census data, respectively, to perform an initial analysis of the load in different geographic areas with various group features (e.g., different income levels). To distinguish the effect of population behavior differences on aggregated load, we simulate load profiles for both sets assuming fixed physical household parameters and weather data. Analysis shows that average daily load profiles vary significantly by income and income dependency varies by locality.

This paper presents a consolidated grid impact analysis design and corresponding mitigation strategies for heavy-duty electric vehicle (EV) charging stations. The charging load of heavy-duty charging station can reach several megawatts, which could induce adverse impacts on the distribution grid if not effectively mitigated. To analyze the impacts and provide corresponding solutions, we select four representative distribution systems - including both single-feeder cases and a multi-feeder case - and design thorough test metrics for the impact analysis. The charging load profiles used in the analysis are derived from realistic conventional heavy-duty vehicle travel data. Based on the analysis results, charging stations are placed at three different representative locations in each distribution system: best, good, and worst locations. Mitigation strategies using a combination of smart charger functionality, on-site photovoltaic (PV) generation, and on-site energy storage (ES) are proposed and tested. A sizing method is also proposed to find the optimal PV-ES-charger capacity that minimizes the capital cost.

This paper presents an analysis of the value that can be realized by medium-voltage back-to-back (MVB2B) converters in terms of increased utilization rate of distributed energy resource (DER) and the improvement in operational conditions. A systematic, transferrable, and scalable methodology has been designed to analyze and quantify the increased DER value from three perspectives: 1) curtailment reduction of the DER generation, 2) size reduction of the energy storage needed to otherwise realize DER hosting levels, and 3) hosting capacity improvement of DER compared to base distribution circuit capability. In the case study, the proposed methodology is applied to two utility distribution systems for analysis and quantification of the grid value of the MVB2B converter, installed in the distribution circuit, and provided to the solar photovoltaic (PV) DERs. The analysis results demonstrate that the MVB2B converter can deliver significant value to PV hosting enhancement of two adjacent distribution systems when they are connected by the MVB2B converter. Based on this case study, this paper analyzes and summarizes the approximate realized grid value of the MVB2B converter for distribution systems dominated by different shares of customer classes.

This paper presents a data-driven, distributionally robust chance-constrained optimization method for estimating the real and reactive power controllability of aggregated distributed energy resources (DER). At the DER-level, a two-dimensional flexibility region can be formed based on the real and reactive power regulating limits of each DER considering forecast uncertainty. At the feeder-level, an aggregated flexibility region is computed via a multi-directional search method. In each search direction, extend the real and reactive power of each controllable DER towards its operational limits until: i) all DERs' maximum operational limits are reached or, ii) one or more of the distribution network operational limits are violated. The method enables three key features for operating aggregated DER resources: controllability estimation, visualization, and risk quantification. Simulation results demonstrated the effectiveness of the algorithm and quantified the impact of different parameter settings on the flexibility region boundary changes. The proposed algorithm is robust and computationally efficient and can meet real-time computing needs.