Search

Aiming at the detection failure of strong noise interference in the dual channel of the dual-sequence frequency hopping (DSFH), the scale transformation stochastic resonance (STSR) is applied for the first time, and the output signal to noise ratio (SNR) is raised effectively, at the same time, the symbol reception is completed for DSFH at low input SNR. Firstly, the radio frequency (RF) and intermediate frequency (IF) signals are analyzed based on the super-heterodyne reception of DSFH; secondly, the equations of probability density function (PDF), output power spectrum and SNR of the STSR output are derived for the IF signal; finally, the algorithm of the optimal matching STSR is proposed with the optimal matching parameters. The simulation results show that the algorithm can effectively solve the detection failure, as the global output SNR of DSFH is strongly improved that the output SNR can reach −17.72 dB when the input SNR is −20 dB after the processing of the optimal matching STSR.

A moveable multi-use neutron imaging facility was constructed based on a compact accelerator D-T neutron source, for use in thermal and fast neutron radiography and tomography. Experiments were carried out to investigate the imaging quality for different standard samples. The smallest width of a slit that can be tested by digitized thermal neutron radiography was found to be 0.06 mm, while the smallest diameter of holes tested by digitized fast neutron radiography was 0.5 mm. A gadolinium wire of 0.2 mm in diameter within a multi-material structure was reconstructed clearly with thermal neutron tomography, and holes in a light material were reconstructed with fast neutron tomography.

(主査) 教授 米澤 徹, 教授 三浦 誠司, 教授 岩井 一彦, 特任准教授 Cheng-Yen Wen, 工学院（材料科学専攻）

この博士論文全文の閲覧方法については、以下のサイトをご参照ください。, https://www.lib.hokudai.ac.jp/dissertations/copy-guides/, (主査) 教授 米澤 徹, 教授 三浦 誠司, 教授 岩井 一彦, 特任准教授 Cheng-Yen Wen, 工学院（材料科学専攻）

Phase change materials (PCMs) are the materials that use phase transition process to achieve certain designed functions. In terms of thermal energy storage (TES), PCMs can be used to store and release thermal energy at a constant temperature through reversible phase transition. This feature makes them suitable storage medium in TES and the heat sink in thermal management of electronic devices. Compared to the common PCMs, like organic compounds and inorganic salts, metals exhibit high volumetric TES density which is helpful for a compact system, and high thermal conductivity which enable the fast charge and discharge of thermal energy. However, the metal PCMs should be encapsulated to avoid corrosion to container, morphology changes and deterioration of micro and nano scale metal PCMs. This thesis focuses on the nanostructure design of micro and nano scale Sn-based PCMs on the purpose of encapsulation of metal PCMs for long-term cyclic stability and morphology control. In Chapter 1, the research background and objectives of this research are introduced. In Chapter 2, silica was selected as the material of the protection shell for Sn PCM. A facile method was proposed for preparing a silica (SiO2)-based material containing Sn nanoparticles (NPs) distributed inside for enhancing the thermal cyclic stability of the inserted Sn NPs. Absorption of a Sn precursor into a mesoporous SiO2 matrix resulted in confinement of the Sn precursor in a mesoporous SiO2 matrix. Hydrogen thermal reduction of the above composite yielded Sn nanoparticles with a diameter of ca. 30 nm uniformly distributed inside porous SiO2 (p-SiO2) spheres: Sn NPs@p-SiO2. The transformation of the porous SiO2 structure for supporting Sn NPs revealed that the process was closely related to the transformation of the amorphous hydrolyzed Sn precursor into Sn oxides followed by, probably, the rearrangement of the SiO2 matrix via its interaction with the melting Sn. This led to the formation of stable Sn NPs@p-SiO2. The SiO2 matrix effectively prevented the coalescence of the Sn NPs, and the obtained product exhibited negligible changes in melting behavior during the second to 100th cycle of a freeze-melt cycle test. In Chapter 3, alumina with higher thermal conductivity compared to silica was selected as the material of the protection shell. In this part, for the first time, alumina-encapsulated metallic Sn-based PCMs, named Sn@Al2O3, were successfully fabricated with tunable size (60 nm-2 μm) and core-shell structure by a facile process from low-cost chemicals. The robust fabrication process consists of a surfactant-free solvothermal synthesis of SnO2 spheres, boehmite treatment on SnO2 spheres, calcination in the air, and the final hydrogen reduction to transform SnO2 to metallic Sn. The boehmite treatment, in which the penetration of aluminum species into SnO2 spheres played an important role, was found to be responsible for the unique structure formation of final Sn@Al2O3. The understanding of structure formation mechanism gives the possibilities of a new facile way for the synthesis of metal NPs and particle-distributed nanostructures. The obtained Sn@Al2O3 particles not only have high PCM content (92.37 wt%) but also show a stable thermal behavior and morphology during 100 melt- freeze cycles in the air atmosphere, exhibiting the potential of fast thermal energy storage within the range of 100-300°C. In Chapter 4, the formation of SnO2@SiO2 hollow nanostructures was demonstrated, for the first time, by diffusion of liquid state Sn cores in Sn@SiO2 core-shell NPs and further interaction with SiO2 with real-time observation via in situ transmission electron microscopy (TEM). Based on the in-situ results, a designed transformation of nanoparticle structure from core-shell Sn@SiO2 to yolk-shell Sn@SiO2 and hollow SnO2@SiO2 is demonstrated, showing the controllable structure from starting core-shell Sn@SiO2 NPs via liquid state Sn diffusion in SiO2 shell and further fixing of Sn by interaction with the dangling bond of SiO2. The proposed approach expands the toolbox for the design and preparation of yolk-shell and hollow nanostructure, thus provides us a new strategy in fabrication of more complicated nanostructures, which can not only be applied in PCMs design but also in catalyst, batteries, etc. Finally, Chapter 5 is a summary of all the results obtained in each chapter and prospective for future research in the above areas., (主査) 教授 米澤 徹, 教授 三浦 誠司, 教授 岩井 一彦, 特任准教授 Cheng-Yen Wen, 工学院（材料科学専攻）