Search

Co-firing “zero-carbon, hydrogen rich, high nitrogen” ammonia (NH3) fuel in coal-fired power plant is an important technical route to mitigate CO2 emission. To explore the impacts of co-firing ammonia fuel on coal combustion and pollutant formation behaviour, the coal-ammonia co-firing experiments were carried out on a McKenna type flat-flame burner system. Combined with visible-light camera, flue gas analyser and thermophoresis probe sampling system, the influence of co-firing ammonia on the flame properties, gaseous pollutant and particulate matter formation was explored. The results show that the ammonia fuel ignites ahead of coal, and the additional heat released from ammonia combustion promotes the pyrolysis of coal and the release of volatile. Thereafter, it promotes the ignition and combustion of volatile, resulting in the increase of flame height and temperature. The added NH3 is partially converted into NO in the volatile flame, resulting in a notable increase in NO concentration. Adding NH3 improves the equivalent ratio of gaseous fuel, which promotes the conversion of volatile to soot, and finally increases the yield of soot particles.

Clay minerals composed of Si and Al could help reduce ultrafine particulate matter (PM) formation as an additive during coal combustion while currently unacceptable high adding dosages (normally 3–5 wt.%) are required due to their inadequate capture efficiency. To find additives that could effectively reduce the formation of ultrafine PM, coal combustion with a novel nano SiO2 additive (<100 nm) was performed to evaluate its effects on reducing ultrafine PM. The generated PM10 was sampled to characterize their particle size distribution, mass yield, size-resolved composition and micromorphology. The results showed that adding a small dosage (0.6%) of nano SiO2 reduced the mass yield of ultrafine PM by 30.70%, showing a much higher ultrafine PM capture efficiency than an existing micron-sized natural clay mineral. However, its performance on different coals varied due to disparities in ash content and composition in coal. A composition analysis revealed that the Na content in the ultrafine PM was decreased after adding nano SiO2, indicating that nano SiO2 inhibited the migration of volatile alkali metals such as Na into ultrafine PM because the Na-containing mineral vapor reacted with the nano SiO2 additive particles with a large specific surface area at a high temperature and inhibited their transformation into ultrafine PM via homogenous nucleation. Changes in the element size distributions and micromorphology showed that the majority of the added nano SiO2 particles reacted or coalesced with each other and/or the minerals embedded in coal, finally growing into a larger PM. [ABSTRACT FROM AUTHOR]