Search

In this study, we investigate the impact of local stellar radiation in cosmological zoom simulations of the formation of Milky Way-sized galaxies. We include the radiation field as an additional feedback component that is computed alongside gravity with a tree code in an optically thin approximation. We resimulate the initial conditions of five Milk Way-like systems taken from the Auriga project with and without stellar radiation, and study the effects of local stellar radiation on several properties of the galaxies and the circumgalactic medium (CGM). Similar to previous findings, we observe with our current model that local stellar radiation can modify gas cooling in the CGM and thus suppress star formation and the surface densities of young stars and HI gas, while having little impact on the total gas content. In particular, it also suppresses the peak of the rotation curve and reduces the mass of the stellar bulge. In the CGM region, the young stellar radiation exceeds the external UVB and dominates the radiation field within the virial halo at all redshifts. Nevertheless, we find that the local stellar radiation, as implemented in the current study, has overall little impact on the radial density and temperature profile of the CGM gas. However, for the ion species HI and MgII the column densities within $\sim 0.3\,R_{\rm vir}$ are reduced, while the OVI column density is hardly impacted by the radiation field due to a lack of soft X-ray components in our current model. Additional effects can be expected from the radiation of the central AGN during phases of quasar activity and from soft X-ray sources, which have not yet been included in the simulations of the present study., Comment: 24 pages, 22 figures, accepted for the publication in MNRAS

In this paper we investigate the role of AGN feedback on the late stage evolution of elliptical galaxies by performing high-resolution hydrodynamical simulation in the {\it MACER} framework. By comparing models that take into account different feedback mechanisms, namely AGN and stellar feedback, we find that AGN feedback is crucial in keeping the black hole in a low accretion state and suppressing the star formation. We then compare the energy from AGN radiation and wind deposited in the galaxy and find that only wind can compensate for the radiative cooling of the gas in the galaxy. Further, we investigate which plays the dominant role, the wind from the cold (quasar) or hot (radio) feedback modes, by examining the cumulative energy output and impact area to which the wind can heat the interstellar medium and suppress star formation. Our results indicate that first, although AGN spends most of its time in hot (radio) mode, the cumulative energy output is dominated by the outburst of the cold mode. Second, only the impact area of the cold-mode wind is large enough to heat the gas in the halo, while the hot-mode wind is not. Additionally, the cold-mode wind is capable of sweeping up the material from stellar mass loss. These results indicate the dominant role of cold-mode wind. The limitations of our model, including the absence of jet feedback, are discussed., Comment: 15 pages, 14 figures. Accepted for publication in MNRAS

The cosmological inflow of a galaxy is speculated to be able to enter the galaxy and enhance the star formation rate (SFR) and black hole accretion rate (BHAR). In this paper, by performing high-resolution hydrodynamic simulations in the framework of {\it MACER}, we investigate the fate of the inflow and its impacts on the evolution of a massive elliptical galaxy. The inflow properties are adopted from the cosmological simulation IllustrisTNG. We find that, the inflow gas hardly enters but is blocked beyond $\sim 20$ kpc from the central galaxy and becomes part of the circumgalactic medium (CGM). The gas pressure gradient, mainly contributed by the thermalized stellar wind and subdominantly by the energy input from the AGN, balances gravity and prevents the inflow from entering the galaxy. The SFR and BHAR are almost not affected by the normal inflow. However, if the rate of cosmological inflow were increased by a factor of 3, a small fraction of the inflow would enter the galaxy and contribute about 10\% of the gas in the galaxy. In this case, the gas density in the galaxy would increase by a factor of $\ga$ 20. This increase is not because of the additional gas supply by the inflow but the increase of gas density in the CGM caused by the inflow. Consequently, the SFR and BHAR would increase by a factor of $\sim$ 5 and $\sim 1000$ respectively. Finally, AGN feedback can perturb the motion of the inflow and heat the CGM through its intermittent outbursts., Comment: 19 pages,13 figures, accepted for publication in MNRAS

Interstellar (ISM) and circumgalactic mediums (CGM) around galaxies are linked to several physical processes that drive galaxy evolution. For example, the X-ray emission from the CGM gas around ellipticals has been linked to the AGN feedback occurring in the host. Upcoming telescopes, such as HUBS with ~2 eV resolution, can provide us with deep insights about the hot gas properties of such galaxies thus constrain these processes. In this project, we discuss X-ray emission of the ISM and CGM of elliptical galaxies simulated using MACER code. We generate X-ray emission data from the MACER simulations with various feedback models and produce mock observations for an instrument with high spectral resolution, which is a necessary step of selecting sources for the future observations with planned mission such as HUBS. More importantly, we establish connections between the physics of AGN and stellar feedback with the emission spectra from the ISM and CGM to investigate the possibility of using observations to constrain feedback models. We fit the X-ray spectra from these simulations with standard fitting procedures and compare the retrieved physical properties with their counterparts from the simulations to understand whether the future high-resolution observations can reliably reveal the properties of the gas in the galaxies., Comment: 10 pages, 13 Figures, accepted in MNRAS

Super-massive black holes (SMBHs) spend most of their lifetime accreting at a rate well below the Eddington limit, manifesting themselves as low-luminosity active galactic nuclei (LLAGNs). The prevalence of a hot wind from LLAGNs is a generic prediction by theories and numerical simulations of black hole accretion and is recently becoming a crucial ingredient of AGN kinetic feedback in cosmological simulations of galaxy evolution. However, direct observational evidence for this hot wind is still scarce. In this work, we identify significant Fe XXVI Ly$\alpha$ and Fe XXV K$\alpha$ emission lines from high-resolution Chandra grating spectra of the LLAGN in NGC\,7213, a nearby Sa galaxy hosting a $\sim10^8\rm~M_\odot$ SMBH, confirming previous work. We find that these lines exhibit a blueshifted line-of-sight velocity of $\sim1100\rm~km s^{-1}$ and a high XXVI Ly$\alpha$ to XXV K$\alpha$ flux ratio implying for a $\sim16$ keV hot plasma. By confronting these spectral features with synthetic X-ray spectra based on our custom magnetohydrodynamical simulations, we find that the high-velocity, hot plasma is naturally explained by the putative hot wind driven by the hot accretion flow powering this LLAGN. Alternative plausible origins of this hot plasma, including stellar activities, AGN photoionization and the hot accretion flow itself, are quantitatively disfavored. The inferred kinetic energy and momentum carried by the wind can serve as strong feedback to the environment. We compare NGC\,7213 to M81*, in which strong evidence for a hot wind was recently presented, and discuss implications on the universality and detectability of hot winds from LLAGNs., Comment: 20 pages, 12 figures, Accepted for publication on ApJ

For most of their lifetime, super-massive black holes (SMBHs) commonly found in galactic nuclei obtain mass from the ambient at a rate well below the Eddington limit, which is mediated by a radiatively inefficient, hot accretion flow. Both theory and numerical simulations predict that a strong wind must exist in such hot accretion flows. The wind is of special interest not only because it is an indispensable ingredient of accretion, but perhaps more importantly, it is believed to play a crucial role in the evolution of the host galaxy via the so-called kinetic mode AGN feedback. Observational evidence for this wind, however, remains scarce and indirect. Here we report the detection of a hot outflow from the low-luminosity active galactic nucleus in M81, based on {\it Chandra} high-resolution X-ray spectroscopy. The outflow is evidenced by a pair of Fe XXVI Ly$\alpha$ lines redshifted and blueshifted at a bulk line-of-sight velocity of $\pm2.8\times10^3 \rm~km~s^{-1}$ and a high Fe XXVI Ly$\alpha$-to-Fe XXV K$\alpha$ line ratio implying a plasma temperature of $1.3\times10^8$ Kelvin. This high-velocity, hot plasma cannot be produced by stellar activity or the accretion inflow onto the SMBH. Our magnetohydrodynamical simulations show, instead, it is naturally explained by a wind from the hot accretion flow, propagating out to $\gtrsim10^6$ times the gravitational radius of the SMBH. The kinetic energy and momentum of this wind can significantly affect the evolution of the circumnuclear environment and beyond., Comment: 31 pages, 10 figures

We perform two-dimensional hydrodynamic simulations to study the non-rotating gas flow in the region from 1-1000 parsec. This region connects the galaxy scale and the accretion disk scale. The gas is irradiated by the photons generated by the accretion disk system near the central black hole with $10^8$ solar mass. We assume that the luminosity of the central accretion system is constant and equals to $0.3$ Eddington luminosity. Gas with density higher than $10^{-24} {\rm g \ cm^{-3}}$ is found to be thermally unstable. Two phase, cold and hot, gas flow will form due to thermal instability. We calculated the ratio of cold gas accretion rate to hot gas accretion rate. This ratio is a function of gas density and generally increases with the increase of gas density. The maximum value of this ratio is $16$, when gas density is $10^{-21} {\rm g \ cm^{-3}} $. Gas with density lower than $10^{-24} {\rm g \ cm^{-3}}$ is found to be thermally stable and the gas flow is one-phase. The applications of the results are briefly discussed., Comment: 9 pages, 10 figures, accepted by MNRAS

Depending on the value of the accretion rate, black hole accretion is divided into cold and hot modes. The two modes have distinctly different physics and correspond to two feedback modes. Most previous feedback works either focus only on one mode, or the accretion physics is not always properly adopted. Here, by performing hydrodynamical numerical simulations of AGN feedback in an elliptical galaxy, we show that including both is important, and gives different results from including just one or the other. We specifically focus on the wind and radiation (but neglecting the jet) feedback in the hot mode, to explore whether this particular mode of feedback can play any important feedback role. For this aim, we have run two test models. In one model, we always adopt the cold mode no matter what value the accretion rate is; in another model, we turn off the AGN once it enters into the hot mode. We have calculated the AGN light curves, black hole growth, star formation, and AGN energy duty-cycle; and compared the results with the model in which the two modes are correctly included. Important differences are found. For example, if we were to adopt only the cold mode, the total mass of newly formed stars would become two orders of magnitude smaller, and the fraction of energy ejected within the high accretion regime (i.e., $L_{\rm BH} > 2\% L_{\rm Edd}$) would be too small to be consistent with observations. We have also investigated the respective roles of wind and radiation in the hot mode., Comment: 15 pages, 7 figures, Accepted for publication in ApJ

Wireless Physical Layer Identification (WPLI) system aims at identifying or classifying authorized devices based on the unique Radio Frequency Fingerprints (RFFs) extracted from their radio frequency signals at the physical layer. Current works of WPLI focus on demonstrating system feasibility based on experimental error performance of WPLI with a fixed number of users. While an important question remains to be answered: what's the user number that WPLI can accommodate using different RFFs and receiving equipment. The user capacity of the WPLI can be a major concern for practical system designers and can also be a key metric to evaluate the classification performance of WPLI. In this work, we establish a theoretical understanding on user capacity of WPLI in an information-theoretic perspective. We apply information-theoretic modeling on RFF features of WPLI. An information-theoretic approach is consequently proposed based on mutual information between RFF and user identity to characterize the user capacity of WPLI. Based on this theoretical tool, the achievable user capacity of WPLI is characterized under practical constrains of off-the-shelf receiving devices. Field experiments on classification error performance are conducted for the validation of the information-theoretic user capacity characterization.

The wireless physical-layer identification (WPLI) techniques utilize the unique features of the physical waveforms of wireless signals to identify and classify authorized devices. As the inherent physical layer features are difficult to forge, WPLI is deemed as a promising technique for wireless security solutions. However, as of today it still remains unclear whether existing WPLI techniques can be applied under real-world requirements and constraints. In this paper, through both theoretical modeling and experiment validation, the reliability and differentiability of WPLI techniques are rigorously evaluated, especially under the constraints of state-of-art wireless devices, real operation environments, as well as wireless protocols and regulations. Specifically, a theoretical model is first established to systematically describe the complete procedure of WPLI. More importantly, the proposed model is then implemented to thoroughly characterize various WPLI techniques that utilize the spectrum features coming from the non-linear RF-front-end, under the influences from different transmitters, receivers, and wireless channels. Subsequently, the limitations of existing WPLI techniques are revealed and evaluated in details using both the developed theoretical model and in-lab experiments. The real-world requirements and constraints are characterized along each step in WPLI, including i) the signal processing at the transmitter (device to be identified), ii) the various physical layer features that originate from circuits, antenna, and environments, iii) the signal propagation in various wireless channels, iv) the signal reception and processing at the receiver (the identifier), and v) the fingerprint extraction and classification at the receiver.