Search

Recently, reconfigurable intelligent surface (RIS) has been widely used to enhance the performance of millimeter wave (mmWave) communication systems, making beam alignment more challenging. To ensure efficient communication, this paper proposes a novel intelligent angle map-based beam alignment scheme for both general user equipments (UEs) and RIS-aided UEs simultaneously in a fast and effective way. Specifically, we construct a beam alignment architecture that utilizes only angular information. To obtain the angle information, the currently hottest seq2seq model - the Transformer - is introduced to offline learn the relationship between UE geographic location and the corresponding optimal beam direction. Based on the powerful machine learning model, the location-angle mapping function, i.e., the angle map, can be built. As long as the location information of UEs is available, the angle map can make the acquisition of beam alignment angles effortless. In the simulation, we utilize a ray-tracing-based dataset to verify the performance of the proposed scheme. It is demonstrated that the proposed scheme can achieve high-precision beam alignment and remarkable system performance without any beam scanning.

In TDD mmWave massive MIMO systems, the downlink CSI can be attained through uplink channel estimation thanks to the uplink-downlink channel reciprocity. However, the channel aging issue is significant under high-mobility scenarios and thus necessitates frequent uplink channel estimation. In addition, large amounts of antennas and subcarriers lead to high-dimensional CSI matrices, aggravating the pilot training overhead. To systematically reduce the pilot overhead, a spatial, frequency, and temporal domain (3D) channel extrapolation framework is proposed in this paper. Considering the marginal effects of pilots in the spatial and frequency domains and the effectiveness of traditional knowledge-driven channel estimation methods, we first propose a knowledge-and-data driven spatial-frequency channel extrapolation network (KDD-SFCEN) for uplink channel estimation by exploiting the least square estimator for coarse channel estimation and joint spatial-frequency channel extrapolation to reduce the spatial-frequency domain pilot overhead. Then, resorting to the uplink-downlink channel reciprocity and temporal domain dependencies of downlink channels, a temporal uplink-downlink channel extrapolation network (TUDCEN) is proposed for slot-level channel extrapolation, aiming to enlarge the pilot signal period and thus reduce the temporal domain pilot overhead under high-mobility scenarios. Specifically, we propose the spatial-frequency sampling embedding module to reduce the representation dimension and consequent computational complexity, and we propose to exploit the autoregressive generative Transformer for generating downlink channels autoregressively. Numerical results demonstrate the superiority of the proposed framework in significantly reducing the pilot training overhead by more than 16 times and improving the system's spectral efficiency under high-mobility scenarios., Comment: 13 pages, 11 figures, 3 tables. This paper has been submitted to IEEE journal for possible publication

In this paper, we propose a dynamic hybrid active-passive reconfigurable intelligent surface (HRIS) to enhance multiple-input-single-output (MISO) communications, leveraging the property of dynamically placing active elements. Specifically, considering the impact of hardware impairments (HWIs), we investigate channel-aware configurations of the receive antennas at the base station (BS) and the active/passive elements at the HRIS to improve transmission reliability. To this end, we address the average mean-square-error (MSE) minimization problem for the HRIS-aided MISO system by jointly optimizing the BS receive antenna selection matrix, the reflection phase coefficients, the reflection amplitude matrix, and the mode selection matrix of the HRIS. To overcome the non-convexity and intractability of this problem, we first transform the binary and discrete variables into continuous ones, and then propose a penalty-based exact block coordinate descent (PEBCD) algorithm to alternately solve these subproblems. Numerical simulations demonstrate the significant superiority of our proposed scheme over conventional benchmark schemes., Comment: 6 pages, 3 figures

Accurate channel state information (CSI) is essential for downlink precoding in frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems with orthogonal frequency-division multiplexing (OFDM). However, obtaining CSI through feedback from the user equipment (UE) becomes challenging with the increasing scale of antennas and subcarriers and leads to extremely high CSI feedback overhead. Deep learning-based methods have emerged for compressing CSI but these methods generally require substantial collected samples and thus pose practical challenges. Moreover, existing deep learning methods also suffer from dramatically growing feedback overhead owing to their focus on full-dimensional CSI feedback. To address these issues, we propose a low-overhead Incorporation-Extrapolation based Few-Shot CSI feedback Framework (IEFSF) for massive MIMO systems. An incorporation-extrapolation scheme for eigenvector-based CSI feedback is proposed to reduce the feedback overhead. Then, to alleviate the necessity of extensive collected samples and enable few-shot CSI feedback, we further propose a knowledge-driven data augmentation (KDDA) method and an artificial intelligence-generated content (AIGC) -based data augmentation method by exploiting the domain knowledge of wireless channels and by exploiting a novel generative model, respectively. Experimental results based on the DeepMIMO dataset demonstrate that the proposed IEFSF significantly reduces CSI feedback overhead by 64 times compared with existing methods while maintaining higher feedback accuracy using only several hundred collected samples., Comment: 16 pages, 12 figures, 5 tables. Accepted by IEEE Transactions on Wireless Communications

In beamformed wireless cellular systems such as 5G New Radio (NR) networks, beam management (BM) is a crucial operation. In the second phase of 5G NR standardization, known as 5G-Advanced, which is being vigorously promoted, the key component is the use of artificial intelligence (AI) based on machine learning (ML) techniques. AI/ML for BM is selected as a representative use case. This article provides an overview of the AI/ML for BM in 5G-Advanced. The legacy non-AI and prime AI-enabled BM frameworks are first introduced and compared. Then, the main scope of AI/ML for BM is presented, including improving accuracy, reducing overhead and latency. Finally, the key challenges and open issues in the standardization of AI/ML for BM are discussed, especially the design of new protocols for AI-enabled BM. This article provides a guideline for the study of AI/ML-based BM standardization., Comment: accepted by IEEE Vehicular Technology Magazine

To reap the promising benefits of massive multiple-input multiple-output (MIMO) systems, accurate channel state information (CSI) is required through channel estimation. However, due to the complicated wireless propagation environment and large-scale antenna arrays, precise channel estimation for massive MIMO systems is significantly challenging and costs an enormous training overhead. Considerable time-frequency resources are consumed to acquire sufficient accuracy of CSI, which thus severely degrades systems' spectral and energy efficiencies. In this paper, we propose a dual-attention-based channel estimation network (DACEN) to realize accurate channel estimation via low-density pilots, by jointly learning the spatial-temporal domain features of massive MIMO channels with the temporal attention module and the spatial attention module. To further improve the estimation accuracy, we propose a parameter-instance transfer learning approach to transfer the channel knowledge learned from the high-density pilots pre-acquired during the training dataset collection period. Experimental results reveal that the proposed DACEN-based method achieves better channel estimation performance than the existing methods under various pilot-density settings and signal-to-noise ratios. Additionally, with the proposed parameter-instance transfer learning approach, the DACEN-based method achieves additional performance gain, thereby further demonstrating the effectiveness and superiority of the proposed method., Comment: 16 pages, 9 figures, 6 tables. Accepted by IEEE Transactions on Wireless Communications

Smart healthcare has achieved significant progress in recent years. Emerging artificial intelligence (AI) technologies enable various smart applications across various healthcare scenarios. As an essential technology powered by AI, natural language processing (NLP) plays a key role in smart healthcare due to its capability of analysing and understanding human language. In this work, we review existing studies that concern NLP for smart healthcare from the perspectives of technique and application. We first elaborate on different NLP approaches and the NLP pipeline for smart healthcare from the technical point of view. Then, in the context of smart healthcare applications employing NLP techniques, we introduce representative smart healthcare scenarios, including clinical practice, hospital management, personal care, public health, and drug development. We further discuss two specific medical issues, i.e., the coronavirus disease 2019 (COVID-19) pandemic and mental health, in which NLP-driven smart healthcare plays an important role. Finally, we discuss the limitations of current works and identify the directions for future works., Comment: 17 pages, 3 figures, 2 tables. Accepted by IEEE Reviews in Biomedical Engineering