Search

Abstract The nanoscale electrical double layer plays a crucial role in macroscopic ion adsorption and reaction kinetics. In this study, we achieve controllable ion migration by dynamically regulating asymmetric electrical double layer formation. This tailors the ionic-electronic coupling interface, leading to the development of triboiontronics. Controlling the charge-collecting layer coverage on dielectric substrates allows for charge collection and adjustment of the substrate-liquid contact electrification property. By dynamically managing the asymmetric electrical double layer formation between the dielectric substrate and liquids, we develop a direct-current triboiontronic nanogenerator. This nanogenerator produces a transferred charge density of 412.54 mC/m2, significantly exceeding that of current hydrovoltaic technology and conventional triboelectric nanogenerators. Additionally, incorporating redox reactions to the process enhances the peak power and transferred charge density to 38.64 W/m2 and 540.70 mC/m2, respectively.

Abstract Triboelectric nanogenerator (TENG) operates on the principle of utilizing contact electrification and electrostatic induction. However, visualization and standardized quantification of surface charges for triboelectric materials remain challenging. Here, we report a surface charge visualization and standardized quantification method using electrostatic surface potential measured by Kevin probe and the iterative regularization strategy. Moreover, a tuning strategy on surface charge is demonstrated based on the corona discharge with a three-electrode design. The long-term stability and dissipation mechanisms of the injected negative or positive charges demonstrate high dependence on deep carrier traps in triboelectric materials. Typically, we achieved a 70-fold enhancement on the output voltage (~135.7 V) for the identical polytetrafluoroethylene (PTFE) based TENG (neg-PTFE/PTFE or posi-PTFE/PTFE triboelectric pair) with stable surface charge density (5% decay after 140 days). The charged PTFE was demonstrated as a robot e-skins for non-contact perception of object geometrics. This work provides valuable tools for surface charge visualization and quantification, giving a new strategy for a deeper understanding of contact electrification.

Abstract Precious metals are core assets for the development of modern technologies in various fields. Their scarcity poses the question of their cost, life cycle and reuse. Recently, an emerging catalysis employing contact-electrification (CE) at water-solid interfaces to drive redox reaction, called contact-electro-catalysis (CEC), has been used to develop metal free mechano-catalytic methods to efficiently degrade refractory organic compounds, produce hydrogen peroxide, or leach metals from spent Li-Ion batteries. Here, we show ultrasonic CEC can successfully drive the reduction of Ag(ac), Rh3+, [PtCl4]2-, Ag+, Hg2+, Pd2+, [AuCl4]-, and Ir3+, in both anaerobic and aerobic conditions. The effect of oxygen on the reaction is studied by electron paramagnetic resonance (EPR) spectroscopy and ab-initio simulation. Combining measurements of charge transfers during water-solid CE, EPR spectroscopy and gold extraction experiments help show the link between CE and CEC. What’s more, this method based on water-solid CE is capable of extracting gold from synthetic solutions with concentrations ranging from as low as 0.196 ppm up to 196 ppm, reaching in 3 h extraction capacities ranging from 0.756 to 722.5 mg g−1 in 3 h. Finally, we showed CEC is employed to design a metal-free, selective, and recyclable catalytic gold extraction methods from e-waste aqueous leachates.

Abstract Mechanical energy harvesting using triboelectric nanogenerators is a highly desirable and sustainable method for the reliable power supply of widely distributed electronics in the new era; however, its practical viability is seriously challenged by the limited performance because of the inevitable side-discharge and low Coulombic-efficiency issues arising from electrostatic breakdown. Here, we report an important progress on these fundamental problems that the spontaneously established reverse electric field between the electrode and triboelectric layer can restrict the side-discharge problem in triboelectric nanogenerators. The demonstration employed by direct-current triboelectric nanogenerators leads to a high Coulombic efficiency (increased from 28.2% to 94.8%) and substantial enhancement of output power. More importantly, we demonstrate this strategy is universal for other mode triboelectric nanogenerators, and a record-high average power density of 6.15 W m−2 Hz−1 is realized. Furthermore, Coulombic efficiency is verified as a new figure-of-merit to quantitatively evaluate the practical performance of triboelectric nanogenerators.

The impaired differentiation ability of resident cells and disordered immune microenvironment in periodontitis pose a huge challenge for bone regeneration. Herein, we construct a piezoelectric hydrogel to rescue the impaired osteogenic capability and rebuild the regenerative immune microenvironment through bioenergetic activation. Under local mechanical stress, the piezoelectric hydrogel generated piezopotential that initiates osteogenic differentiation of inflammatory periodontal ligament stem cells (PDLSCs) via modulating energy metabolism and promoting adenosine triphosphate (ATP) synthesis. Moreover, it also reshapes an anti-inflammatory and pro-regenerative niche through switching M1 macrophages to the M2 phenotype. The synergy of tilapia gelatin and piezoelectric stimulation enhances in situ regeneration in periodontal inflammatory defects of rats. These findings pave a new pathway for treating periodontitis and other immune-related bone defects through piezoelectric stimulation-enabled energy metabolism modulation and immunomodulation.

In classical electrodynamics, by motion, it always means a relative movement of two observers in inertia reference frames, so that the covariance of the Maxwell’s equations is preserved respectively in two spaces under Lorentz transformation. The energy is thus conservative for the electromagnetic system. The theory for describing the electromagnetic behavior of the charged particles in vacuum space can be well described using the special relativity because of the invariance of the speed of light in vacuum. However, for engineering applications, the media have shapes and sizes and may move with acceleration, and a system may have multiple moving objects that may be correlated or independently under external mechanical triggering. This paper presents the theory for describing the electromagnetic phenomena in this electro-magnetic-mechano system. We mainly introduce the Maxwell’s equations for a mechano-driven media system (MEs-f-MDMS) under low-speed approximation (v << c). We concluded that the MEs-f-MDMS are required for describing the electrodynamics inside a moving object that moves not only with accelerated translation motion but also has rotation motion. The classical Maxwell’s equations are to describe the electrodynamics in the region where there is no local medium movement. The full solutions of the two regions satisfy the boundary conditions, so that the rotation of the object affects the electromagnetic field at vicinity. The theoretical approaches for solving the MEs-f-MDMS are also presented.

Abstract It is an increasingly mature application solution that triboelectric nanogenerator (TENG) supplies power to electronic devices through its power management system (PMS). However, the previous PMS is able to manage a limited voltage magnitude and the energy storage elements are limited to capacitors. This work proposes an ultrahigh voltage PMS (UV‐PMS) to realize the charging of commercial lithium cells (LCs) by TENG. The design of UV‐PMS enables energy management of TENGs with ultrahigh open‐circuit voltages up to 3500 V and boosts the peak charging current from 30.9 µA to 2.77 mA, an increase of 89.64 times. With the introduction of UV‐PMS, the effective charging capacity of LC charged by a TENG at a working frequency of 1.5 Hz for 1 h comes to 429.7 µAh, making a 75.3 times enhancement compared to charging by TENG directly. The maximum charging power comes to 1.56 mW. The energy storage efficiency is above 97% and the overall charge efficiency can be maintained at 81.2%. This work provides a reliable strategy for TENG to store energy in LC, and has promising applications in energy storage, LC's life, and self‐powered systems.

Abstract Developing ultrahigh‐strength fabric‐based triboelectric nanogenerators for harvesting high‐impact energy and sensing biomechanical signals is still a great challenge. Here, the constraints are addressed by design of a multistrand twisted triboelectric Kevlar (MTTK) yarn using conductive and non‐conductive Kevlar fibers. Manufactured using a multistrand twisting process, the MTTK yarn offers superior tensile strength (372 MPa), compared to current triboelectric yarns. In addition, a self‐powered impact sensing fabric patch (SP‐ISFP) comprising signal acquisition, processing, communication circuit, and MTTK yarns is integrated. The SP‐ISFP features withstanding impact (4 GPa) and a sensitivity and response time under the high impact condition (59.68 V GPa−1; 0.4 s). Furthermore, a multi‐channel smart bulletproof vest is developed by the array of 36 SP‐ISFPs, enabling the reconstruction of impact mapping and assessment of body injury location and levels by real‐time data acquisition. Their potential to reduce body injuries, professional security, and construct a multi‐point personal vital signs dynamic monitoring platform holds great promise.

Blue energy, which includes rainfall, tidal current, wave, and water-flow energy, is a promising renewable resource, although its exploitation is limited by current technologies and thus remains low. This form of energy is mainly harvested by electromagnetic generators (EMGs), which generate electricity via Lorenz force-driven electron flows. Triboelectric nanogenerators (TENGs) and TENG networks exhibit superiority over EMGs in low-frequency and high-entropy energy harvesting as a new approach for blue energy harvesting. A TENG produces electrical outputs by adopting the mechanism of Maxwell’s displacement current. To date, a series of research efforts have been made to optimize the structure and performance of TENGs for effective blue energy harvesting and marine environmental applications. Despite the great progress that has been achieved in the use of TENGs in this context so far, continuous exploration is required in energy conversion, device durability, power management, and environmental applications. This review reports on advances in TENGs for blue energy harvesting and marine environmental monitoring. It introduces the theoretical foundations of TENGs and discusses advanced TENG prototypes for blue energy harvesting, including TENG structures that function in freestanding and contact-separation modes. Performance enhancement strategies for TENGs intended for blue energy harvesting are also summarized. Finally, marine environmental applications of TENGs based on blue energy harvesting are discussed.

The utilization of abundant blue energy in the ocean could greatly contribute to achieving carbon neutrality. However, the unsolved economic and technical challenges of traditional technologies for harvesting blue energy have resulted in slow progress. Triboelectric nanogenerators (TENGs), as a new approach for converting mechanical energy into electricity, have great potential for blue energy harvesting, which can be connected as networks with different numbers of units for varying scales of energy harvesting. Here, recent advances of networking strategies of TENGs for harvesting blue energy are reviewed, mainly concerning mechanical and electrical connection designs. Anchoring strategies of devices and networks are also discussed. The development of TENG networks could provide an effective solution for large-scale ocean blue energy harvesting, which can also serve as an in-situ energy station or power source for self-powered systems, supporting various marine equipment and activities.

Abstract Ball milling is a representative mechanochemical strategy that uses the mechanical agitation-induced effects, defects, or extreme conditions to activate substrates. Here, we demonstrate that ball grinding could bring about contact-electro-catalysis (CEC) by using inert and conventional triboelectric materials. Exemplified by a liquid-assisted-grinding setup involving polytetrafluoroethylene (PTFE), reactive oxygen species (ROS) are produced, despite PTFE being generally considered as catalytically inert. The formation of ROS occurs with various polymers, such as polydimethylsiloxane (PDMS) and polypropylene (PP), and the amount of generated ROS aligns well with the polymers’ contact-electrification abilities. It is suggested that mechanical collision not only maximizes the overlap in electron wave functions across the interface, but also excites phonons that provide the energy for electron transition. We expect the utilization of triboelectric materials and their derived CEC could lead to a field of ball milling-assisted mechanochemistry using any universal triboelectric materials under mild conditions.

Abstract Harvesting biomechanical energy from cardiac motion is an attractive power source for implantable bioelectronic devices. Here, we report a battery-free, transcatheter, self-powered intracardiac pacemaker based on the coupled effect of triboelectrification and electrostatic induction for the treatment of arrhythmia in large animal models. We show that the capsule-shaped device (1.75 g, 1.52 cc) can be integrated with a delivery catheter for implanting in the right ventricle of a swine through the intravenous route, which effectively converts cardiac motion energy to electricity and maintains endocardial pacing function during the three-week follow-up period. We measure in vivo open circuit voltage and short circuit current of the self-powered intracardiac pacemaker of about 6.0 V and 0.2 μA, respectively. This approach exhibits up-to-date progress in self-powered medical devices and it may overcome the inherent energy shortcomings of implantable pacemakers and other bioelectronic devices for therapy and sensing.

Abstract The triboelectric nanogenerator (TENG) reflects a prospering field, that uses Maxwell's displacement current as the driving force to transform mechanical energy into electricity. Based on the law of energy conservation, many theoretical models of TENGs are proposed to provide a detailed insight into how energy flows and transformation in the energy harvesting system, while ignoring a hidden but extremely important point about TENG's momentum transfer and conservation. Here a series of analysis is presented for the momentum transfer and conservation in TENGs based on Maxwell equations and stress tensor. Using a time‐dependent 3D mathematical model, it is elaborated that how the time‐ and spatial‐dependent momentum current is influenced by the field and the dielectric materials, demonstrating that momentum is overall conserved for a TENG. In other words, the TENG device can not only convert mechanical energy into electricity, but it is also able to transfer momentum. Momentum transfer is another important characteristic of TENGs, and finally, the essential differences and similarities among the momentum transfer, energy transfer, and energy transformation in TENGs are systematically discussed. This study will certainly serve as a new starting point for exploring momentum transfer and conservation in the TENG momentum transfer system.

Abstract Electrospinning (ES) methods that can produce piezoelectricity in polymer nanofibers have attracted tremendous research attention. These electrospun polymer nanofibers can be employed for sensors, energy harvesting, tissue engineering, and filtration applications. This paper reviews the performance of a variety of electrospun piezoelectric polymer nanofibers produced by different ES methods, including near‐field electrospinning and conventional far‐field electrospinning methods. Herein, it is described how the ES method can affect the piezoelectric properties of various polymer nanofibers, including poly(vinylidene difluorine), poly(vinylidene fluoride‐trifluoroethylene), nylon 11, poly(l‐lactic acid), and poly(α‐benzyl‐l‐glutamate). Due to the varied matrix structures of piezoelectric polymer nanofibers, the ES method may conduct variable effects on the piezoelectric properties of polymer nanofibers. After characterizations by X‐ray diffraction, Fourier transform infrared spectrum, dielectric spectra, and piezoelectric coefficient measurements, it is found that the piezoelectric properties of the polymer nanofibers can be significantly affected by the ES parameters. Most of previous review articles focus on the output performance of electrospun polymer nanofibers. A detailed description of how different ES methods affect the piezoelectricity of polymer nanofibers is still lacking. In this review paper, the basic principle behind ES methods and the way in which different ES methods affect the properties of polymer nanofibers are examined.

With the global energy shortages, sustainable energy scavenging from the natural environment is desperately needed. Unlike solar cell or wind power, which depends heavily on weather conditions, triboelectric nanogenerator (TENG) has received extensive attention as an efficient all–weather energy–harvesting technology. Based on the coupling principle of contact electrification (CE) and electrostatic induction, conventional TENGs convert mechanical energy into an alternating current (AC) output. However, the typically distributed sensor systems in the ubiquitous Internet of Things (IoTs) request a direct current (DC) input. Direct current triboelectric nanogenerators (DC-TENGs) with the constant output characteristic are critical to satisfy the above requirements. Here, DC-TENGs were reviewed from the perspective of material selections. As device performance is mainly determined by material properties, the development of DC-TENGs could be divided into three categories based on dielectric materials, semiconductor materials, and materials for iontronic rectifications. The operating mechanism and influencing factors of various types of DC-TENG were summarized, representative applications were demonstrated, and the main challenges of future developments were also discussed.

Highlights Successfully solves the key issue of tribovoltaic nanogenerators (TVNGs) lifetime (90,000 cycles) and improves its output current density (754 mA m−2) simultaneously. Conductive polar liquid with MXene as additive is proposed as the dominant factor in enhancing the electrical output performance and durability of TVNG simultaneously. The mechanism of lubricated TVNG with enhanced output performance is explained from the perspective of solution polarity at the first time. Mxene solution exhibits universality in different types of semiconductor systems (Cu and P-type Si, and Cu and N-GaAs as material pairs).

Raindrops contain abundant renewable energy including both kinetic energy and electrostatic energy, and how to effectively harvest it becomes a hot research topic. Recently, a triboelectric nanogenerator (TENG) using liquid–solid contact electrification has been demonstrated for achieving an ultra-high instantaneous power output. However, when harvesting the energy from the dense raindrops instead of a single droplet, a more rational structure to eliminate the mutual influence of individual generation units is needed for maximize the output. In this work, a “solar panel-like” bridge array generators (BAGs) is proposed. By adopting array lower electrodes (ALE) and bridge reflux structure (BRS), BAGs could minimize the sharp drop in the peak power output for large-scale energy harvesting devices. When the area of the raindrop energy harvesting device is 15 × 15 cm2, the peak power output of BAGs reached 200 W/m2, which is remarkable for paving a potential industrial approach for effective harvesting raindrop energy at a large scale.

Abstract Eye tracking provides valuable insight for analyzing visual attention and underlying thinking progress through the observation of eye movements. Here, a transparent, flexible and ultra-persistent electrostatic sensing interface is proposed for realizing active eye tracking (AET) system based on the electrostatic induction effect. Through a triple-layer structure combined with a dielectric bilayer and a rough-surface Ag nanowire (Ag NW) electrode layer, the inherent capacitance and interfacial trapping density of the electrostatic interface has been strongly enhanced, contributing to an unprecedented charge storage capability. The electrostatic charge density of the interface reached 1671.10 μC·m−2 with a charge-keeping rate of 96.91% after 1000 non-contact operation cycles, which can finally realize oculogyric detection with an angular resolution of 5°. Thus, the AET system enables real-time decoding eye movements for customer preference recording and eye-controlled human-computer interaction, supporting its limitless potentiality in commercial purpose, virtual reality, human computer interactions and medical monitoring.

Abstract Thromboelastography (TEG) remains a convenient and effective viscoelastic blood coagulation testing device for guiding blood component transfusion and assessing the risk of thrombosis. Here, a TEG enabled by a non‐contact triboelectric angle sensor (NTAS) with a small size (∼7 cm3) is developed for assessing the blood coagulation system. With the assistance of a superelastic torsion wire structure, the NTAS‐TEG realizes the detection of blood viscoelasticity. Benefiting from a grating and convex design, the NTAS holds a collection of compelling features, including accurate detection of rotation angles from −2.5° to 2.5°, high linearity (R2 = 0.999), and a resolution of 0.01°. Besides, the NTAS exhibits merits of low cost and simplified fabrication. Based on the NTAS‐TEG, a viscoelastic blood coagulation detection and analysis system is successfully constructed, which can provide a graph and parameters associated with clot initiation, formation, and stability for clinicians by using 0.36 mL of whole blood. The system not only validates the feasibility of the triboelectric coagulation testing sensor, but also further expands the application of triboelectric sensors in healthcare.

As one of the few self-powered instruments and devices, triboelectric nanogenerators (TENGs) have been developed for more than 10 years since its invention in 2012. With wide material selections and diverse design structures, and without having to use an external power supply, TENG has been applied in many key technologies. By the end of 2022, more than 16,000 researchers from 83 countries and regions around the world have authored scientific papers in TENG. In this review, we start from the theoretical principles and working mechanisms of TENG, and discuss its 5 major fields of application, namely, as self-powered sensors, high-voltage energy devices, blue energy devices, micro/nano-energy devices, and solid–liquid interface probes. Next, we review the breakthrough progress made using TENG as commercial products in the following fields: medical health, intelligent security, and marine energy. Finally, we look forward to the future fields of application of TENG as advanced instruments and devices, especially in fluid dynamics sensing and aerospace fields. We firmly believe that various instruments and devices based on TENG technology will better serve the progress of human civilization.

The rapid development of wearable electronics requires its energy supply part to be flexible, wearable, integratable and sustainable. However, some of the energy supply units cannot meet these requirements at the same time, and there is also a capacity limitation of the energy storage units, and the development of sustainable wearable self-charging power supplies is crucial. Here, we report a wearable sustainable energy harvesting-storage hybrid self-charging power textile. The power textile consists of a coaxial fiber-shaped polylactic acid/reduced graphene oxide/polypyrrole (PLA-rGO-PPy) triboelectric nanogenerator (fiber-TENG) that can harvest low-frequency and irregular energy during human motion as a power generation unit, and a novel coaxial fiber-shaped supercapacitor (fiber-SC) prepared by functionalized loading of a wet-spinning graphene oxide fiber as an energy storage unit. The fiber-TENG is flexible, knittable, wearable and adaptable for integration with various portable electronics. The coaxial fiber-SC has high volumetric energy density and good cycling stability. The fiber-TENG and fiber-SC are flexible yarn structures for wearable continuous human movement energy harvesting and storage as on-body self-charging power systems, with light-weight, ease of preparation, great portability and wide applicability. The integrated power textile can provide an efficient route for sustainable working of wearable electronics.

Abstract Real-time monitoring of flow turbulence is very difficult but extremely important in fluid dynamics, which plays an important role in flight safety and control. Turbulence can cause airflow to detach at the end of the wings, potentially resulting in the aerodynamic stall of aircraft and causing flight accidents. Here, we developed a lightweight and conformable system on the wing surface of aircraft for stall sensing. Quantitative data about airflow turbulence and the degree of boundary layer separation are provided in situ using conjunct signals provided by both triboelectric and piezoelectric effects. Thus, the system can visualize and directly measure the airflow detaching process on the airfoil, and senses the degree of airflow separation during and after a stall for large aircraft and unmanned aerial vehicles.

Designing tactile sensors with high spatial resolution are crucial to manufacture large scale flexible electronics. Here, the authors develop a micro-cage structure by exploiting photo-reticulated strain localization films (prslPDMS), which shows the strain local confinement effect and could be used to prepare ultralow crosstalk sensor arrays.

The widespread vibration is one of the most promising energy sources for IoT and small sensors, and broad-frequency vibration energy harvesting is important. Triboelectric nanogenerators (TENGs) can convert vibration energy into electrical energy through triboelectricity and electrostatic induction, providing an effective solution to the collection of broad-frequency vibration energy. Also, the power supply in constrained and compact spaces has been a long-standing challenge. Here, a miniaturized power supply (MPS) based on a broad-frequency vibration-driven triboelectric nanogenerator (TENG) is developed. The size of the MPS is 38 mm × 26 mm × 20 mm, which can adapt to most space-limited environments. The TENG device is optimized through theoretical mechanical modeling for the external stimuli, it can efficiently harvest vibrational energy in the frequency range of 1–100 Hz and has a high output power density of 134.11 W/cm3. The developed device demonstrates its practical application potential in powering small electronics like LEDs, watches, and timers.

Abstract Based on the coupling effects of contact electrification and electrostatic induction, a triboelectric nanogenerator (TENG) can convert mechanical energy into electric power, which is at the cutting edge of alternative energy technology. Although a considerable number of TENGs with different configurations have been designed, some of them however, which only depend on the electrostatic induction effect have not received enough attention. Here, a non‐contact TENG model consists of copper rings and charged dielectric sphere is presented, which is aimed at exploring the working process of TENGs caused by electrostatic induction. Two classical models, including vertical and horizontal double copper rings models are also proposed. Relevant advanced and accurate models of TENGs have been established through the finite element method. We anticipate that the constructed model and theoretical analysis are helpful for the design of non‐contact model TENGs with complicated geometric construction, and expand their applications in various fields.

We developed a human visual-cell-inspired perovskite-based color camera that demonstrated high-resolution (up to 256×256 pixels) color images in diffuse mode.

The anti-freezing property of electrolyte is crucial for aqueous batteries under extreme conditions. Here authors explore the relationship between tetrahedral entropy and the freezing behavior of aqueous electrolyte, and further develop anti-freezing electrolyte for aqueous zinc ion batteries.

Highlights Multidiscipline application of triboelectric nanogenerators (TENGs) for intelligent Internet of Things (IoTs) are summarized from the aspects of agriculture, industry, city, emergency monitoring, and artificial intelligence. Perspectives on the challenges and future research directions of TENGs in IoTs have been proposed.

The use of epidermal growth factor for wound healing is limited by transdermal permeability, reduction, and receptor desensitization. Here the authors develop a microneedle-based self-powered transcutaneous electrical stimulation system to overcome these challenges.

Abstract Letter handwriting, especially stroke correction, is of great importance for recording languages and expressing and exchanging ideas for individual behavior and the public. In this study, a biodegradable and conductive carboxymethyl chitosan-silk fibroin (CSF) film is prepared to design wearable triboelectric nanogenerator (denoted as CSF-TENG), which outputs of V oc ≈ 165 V, I sc ≈ 1.4 μA, and Q sc ≈ 72 mW cm−2. Further, in vitro biodegradation of CSF film is performed through trypsin and lysozyme. The results show that trypsin and lysozyme have stable and favorable biodegradation properties, removing 63.1% of CSF film after degrading for 11 days. Further, the CSF-TENG-based human–machine interface (HMI) is designed to promptly track writing steps and access the accuracy of letters, resulting in a straightforward communication media of human and machine. The CSF-TENG-based HMI can automatically recognize and correct three representative letters (F, H, and K), which is benefited by HMI system for data processing and analysis. The CSF-TENG-based HMI can make decisions for the next stroke, highlighting the stroke in advance by replacing it with red, which can be a candidate for calligraphy practice and correction. Finally, various demonstrations are done in real-time to achieve virtual and real-world controls including writing, vehicle movements, and healthcare.

Determining the triboelectric charge and energy density of dielectric materials is generally limited by many factors, failing to reflect their intrinsic behaviour. Here, a standardized strategy is proposed employing contact-separation TENG and supressing air-breakdown to assess max triboelectric charge and energy densities leading to an updated triboelectric series.

Electron transfer has been shown to contribute to contact electrification at liquid–solid interface. Here, authors investigate the magnetic field effect on the liquid–solid electron transfer and propose a spin conversion model for the liquid–solid contact electrification.

Abstract Inspired by biological neural networks, the fabrication of artificial neuromorphic systems with multimodal perception capacity shows promises in overcoming the “von Neumann bottleneck” and takes advantage of the efficient perception and computation of diverse types of signals. Here, we combine a triboelectric nanogenerator with an α‐phase indium selenide (α‐In2Se3) optoelectronic synaptic transistor to construct a tribo‐ferro‐optoelectronic artificial neuromorphic device with multimodal plasticity. Based on the excellent ferroelectric and optoelectronic characteristics of the α‐In2Se3 channel, typical synaptic behaviors (e.g., pair‐pulse facilitation and short‐term/long‐term plasticity) are successfully simulated in response to the synergistic effect of mechanical and optical stimuli. The interaction of mechanical displacement and light illumination enables heterosynaptic plasticity and spatiotemporal dynamic logic. Furthermore, multiple Boolean logical functions and associative learning behaviors are successfully implemented using the paired stimuli of displacement pulses and light pulses. The proposed tribo‐ferro‐optoelectronic artificial neuromorphic devices have great potential for application in interactive neural networks and next‐generation artificial intelligence.

A simple theory of tribovoltaics is proposed by using a quantum mechanical model of energy release due to sliding-induced bonding between the surfaces of a p-doped semiconductor and a n-doped semiconductor. The energy release in forming a bond may lead to the excitation of electron-hole pairs at the p-n semiconductor interface if the released energy is higher than the effective band gap at the semiconductor interface. An expression for the generated current as a function of the relative sliding speed between the p and n sides is suggested and used to model current transport by solving the complete set of drift-diffusion equations with appropriate boundary and initial conditions. Analytical results are obtained and verified numerically using the comsol finite-element-method software. It is shown that since the typical time period associated with periodic sliding is many orders of magnitude higher than the carrier lifetimes, the time-dependent variations in the electron and hole concentrations and the current density follow the time variation of the sliding speed. Since the electron-hole pair generation occurs near the semiconductor interface only, the current density is shown to be constant as a function of position even if the sliding speed changes in time.

With the arrival of the era of artificial intelligence (AI) and big data, the explosive growth of data has raised higher demands on computer hardware and systems. Neuromorphic techniques inspired by biological nervous systems are expected to be one of the approaches to breaking the von Neumann bottleneck. Piezotronic neuromorphic devices modulate electrical transport characteristics by piezopotential and directly associate external mechanical motion with electrical output signals in an active manner, with the capability to sense/store/process information of external stimuli. In this review, we have presented the piezotronic neuromorphic devices (which are classified into strain-gated piezotronic transistors and piezoelectric nanogenerator-gated field effect transistors based on device structure) and discussed their operating mechanisms and related manufacture techniques. Secondly, we summarized the research progress of piezotronic neuromorphic devices in recent years and provided a detailed discussion on multifunctional applications, including bionic sensing, information storage, logic computing, and electrical/optical artificial synapses. Finally, in the context of future development, challenges, and perspectives, we have discussed how to modulate novel neuromorphic devices with piezotronic effects more effectively. It is believed that the piezotronic neuromorphic devices have great potential for the next generation of interactive sensation/memory/computation to facilitate the development of the Internet of Things, AI, biomedical engineering, etc.

Respiratory sensing provides a simple, non-invasive, and efficient way for medical diagnosis and health monitoring, but it relies on sensors that are conformal, accurate, durable, and sustainable working. Here, a stretchable, multichannel respiratory sensor inspired by the structure of shark gill cleft is reported. The bionic shark gill structure can convert transverse elastic deformation into longitudinal elastic deformation during stretching. Combining the optimized bionic shark gill structure with the piezoelectric and the triboelectric effect, the bionic shark gill respiratory sensor (BSG-RS) can produce a graded electrical response to different tensile strains. Based on this feature, BSG-RS can simultaneously monitor the breathing rate and breathing depth of the human body accurately, and realize the effective recognition of the different human body's breathing state under the supporting software. With good stretchability, wearability, accuracy, and long-term stability (50,000 cycles), BSG-RS is expected to be applied as self-powered smart wearables for mobile medical diagnostic analysis in the future.

High charge density is the foundation to promote a wide range of applications of triboelectric nanogenerators. Here, authors propose a processing method based on the repeated rheological forging of triboelectric polymers achieving an enhanced triboelectricity and further study its mechanism.

Underwater communication, despite constant development, still remains a challenging technology. Here, authors report an underwater wireless communication approach based on the triboelectric nanogenerator, which provides a self-powered communication system in complex underwater environments.

Abstract The advances in biological magnetoreception and microelectronics have promoted the vigorous development of interactive electronic devices capable of noncontact interaction and control via magnetic fields. Here, a magnetosensory power device (MPD) that integrates a magnetic film ((Fe90Co10)78Si12B10) unit into a cantilever‐structured AlGaN/GaN‐based high‐electron‐mobility‐transistor is presented. The MPD is capable to not only sense external magnetic field, but also control device output power with the emulation of magnetoreception. Specifically, the device can achieve significant control of output power density (18.04 to 18.94 W mm−2) quasi‐linearly with magnetic field stimuli (0–400 mT) at a gate bias of −5 V. In addition, the maximum output power density of the MPD can reach 85.8 W mm−2 when a gate bias of 1 V is applied. The simulation and experimental results show that MPD has excellent orientation and magnetic field sensing functions under 0–400 mT magnetic fields. With the intelligent capabilities of magnetic sense and output power control, such interactive electronic devices will have broad application prospects in the fields of artificial intelligence, advanced robotics, and human‐machine interfaces.

Inspired by endogenous physiological electric fields in humans, electricity has been widely used as an accessible source of physical stimulation to help treat diseases, including cancer therapy. Electricity can not only be used as a weapon to directly kill cancer cells but also be used as a “switch” to control the anticancer drug delivery systems (DDSs), enabling on‐demand drug release at the lesion sites. Recently, the antitumor electrotherapy based on the induction of tumor cell apoptosis by highly toxic reactive oxygen species (ROS) has been developed. Many studies have proved that the electrical stimulation can mobilize the body's immune system to kill tumors through different mechanisms. When the single electrical therapy is not effective for the treatment of advanced tumors, the integration with immunotherapy is considered as “life‐saving straw.” Moreover, with the growing need for convenient, personalized, and telehealth care and treatment, the emerging nanotechnologies such as self‐powered triboelectric nanogenerators (TENGs) are integrated with electrotherapy. This review comprehensively summarizes these developments from clinic applications to new emerging strategies and proposes future challenges and opportunities in this field.

Abstract With the development of engineered nanomaterials and nanomedicines, utilization of nanomaterials to generate excessive reactive oxygen species under exogenous ultrasound (US) irradiation for realizing disease therapy, namely sonodynamic therapy (SDT), has attracted widespread attention. Compared with traditional photodynamic therapy, US shows deeper tissue penetration to reach deep‐seated location. However, the development of high‐efficiency sonosensitizers remains one of the gravest challenges in current related research and future clinical application. Latterly, benefiting from the piezotronic and piezo‐phototronic effects, novel sonosensitizers based on piezoelectric semiconductor (PS) nanomaterials have exhibited inspiring application prospects in SDT. In this review, we outline the structures and physicochemical properties of PS nanomaterials that has potential applications in SDT, and introduce the presumed mechanisms of PS nanomaterials in SDT. Then, the latest research progress of PS nanomaterials as sonosensitizers in cancer therapy and antibacterial applications are summarized. Finally, the existing challenges and future development trends in this field are prospected.

Abstract Electronic fibers used to fabricate wearable triboelectric nanogenerator (TENG) for harvesting human mechanical energy have been extensively explored. However, little attention is paid to their mutual advantages of environmental friendliness, mechanical properties, and stability. Here, we report a super-strong, biodegradable, and washable cellulose-based conductive macrofibers, which is prepared by wet-stretching and wet-twisting bacterial cellulose hydrogel incorporated with carbon nanotubes and polypyrrole. The cellulose-based conductive macrofibers possess high tensile strength of 449 MPa (able to lift 2 kg weights), good electrical conductivity (~ 5.32 S cm−1), and excellent stability (Tensile strength and conductivity only decrease by 6.7% and 8.1% after immersing in water for 1 day). The degradation experiment demonstrates macrofibers can be degraded within 108 h in the cellulase solution. The designed fabric-based TENG from the cellulose-base conductive macrofibers shows a maximum open-circuit voltage of 170 V, short-circuit current of 0.8 µA, and output power at 352 μW, which is capable of powering the commercial electronics by charging the capacitors. More importantly, the fabric-based TENGs can be attached to the human body and work as self-powered sensors to effectively monitor human motions. This study suggests the potential of biodegradable, super-strong, and washable conductive cellulose-based fiber for designing eco-friendly fabric-based TENG for energy harvesting and biomechanical monitoring.

Abstract Triboelectric nanogenerators (TENGs) can directly harvest energy via solid–liquid interface contact electrification, making them very suitable for harvesting raindrop energy and as active rainfall sensors. This technology is promising for realizing a fully self-powered system for autonomous rainfall monitoring combined with energy harvesting/sensing. Here, we report a raindrop energy-powered autonomous rainfall monitoring and wireless transmission system (R-RMS), in which a raindrop-TENG (R-TENG) array simultaneously serves as a raindrop energy harvester and rainfall sensor. At a rainfall intensity of 71 mm/min, the R-TENG array can generate an average short-circuit current, open-circuit voltage, and maximum output power of 15 μA, 1800 V, and 325 μW, respectively. The collected energy can be adjusted to act as a stable 2.5 V direct-current source for the whole system by a power management circuit. Meanwhile, the R-TENG array acts as a rainfall sensor, in which the output signal can be monitored and the measured data are wirelessly transmitted. Under a rainfall intensity of 71 mm/min, the R-RMS can be continuously powered and autonomously transmit rainfall data once every 4 min. This work has paved the way for raindrop energy-powered wireless hyetometers, which have exhibited broad prospects in unattended weather monitoring, field surveys, and the Internet of Things.

Lip-language decoding systems are a promising technology to help people lacking a voice live a convenient life with barrier-free communication. Here, authors propose a concept of such system integrating self-powered triboelectric sensors and a well-trained dilated RNN model based on prototype learning.

Difficulties in separating tribo and piezoelectric hybrid signals can lead to an overestimated contribution of the latter. Here, authors propose a method to separate these hybrid signals in the time domain, precisely extracting piezoelectric charge transfer for performance evaluation.

Abstract The pursuit to mimic skin exteroceptive ability has motivated the endeavors for epidermal artificial mechanoreceptors. Artificial mechanoreceptors are required to be highly sensitive to capture imperceptible skin deformations and preferably to be self-powered, breathable, lightweight and deformable to satisfy the prolonged wearing demands. It is still struggling to achieve these traits in single device, as it remains difficult to minimize device architecture without sacrificing the sensitivity or stability. In this article, we present an all-fiber iontronic triboelectric mechanoreceptor (ITM) to fully tackle these challenges, enabled by the high-output mechano-to-electrical energy conversion. The proposed ITM is ultralight, breathable and stretchable and is quite stable under various mechanical deformations. On the one hand, the ITM can achieve a superior instantaneous power density; on the other hand, the ITM shows excellent sensitivity serving as epidermal sensors. Precise health status monitoring is readily implemented by the ITM calibrating by detecting vital signals and physical activities of human bodies. The ITM can also realize acoustic-to-electrical conversion and distinguish voices from different people, and biometric application as a noise dosimeter is demonstrated. The ITM therefore is believed to open new sights in epidermal electronics and skin prosthesis fields.

Contact electro catalysis (CEC) was proposed as a novel catalytic principle that uses electron transfers during contact electrification to accelerate chemical reactions. Here the authors show even catalytically inert pristine polymers can catalyze the degradation of organic pollutant.

Abstract The general concept of dielectric polarization density (P) is a macroscopic description of the underlying microscopic structure in the presence of an external electric field and polarized materials itself. A time‐dependent polarization PS induced by a non‐electric field also exists in practice due to the mechanically driven relative motion of media owing to the effects of contact electrification or piezoelectricity. In this work, the starting point is to consider the difference between P and PS, and how PS enters into the governing equations, since it describes the dielectric polarization density without an applied electric field, finally modifying the constitutive relations, Faraday's law, and Maxwell's equations. On this background, a 3D mathematical‐physical model for the sliding mode freestanding triboelectric nanogenerators (TENGs) is established that is taken as an example to confirm the relationship of free charge distribution and dynamics of output power. What needs to be emphasized is that the method of segmented uniform charge distribution is effective and the physical basis for modeling construction and analysis. Finally, we summarized the mathematical‐physical models of TENGs in rectangular coordinates, cylindrical coordinates, and spherical coordinates, building a bridge to reveal the underlying principle behind the microscopic polarization and energy conversion.

Abstract Recent advances in flexible wearable devices have boosted the remarkable development of devices for human–machine interfaces, which are of great value to emerging cybernetics, robotics, and Metaverse systems. However, the effectiveness of existing approaches is limited by the quality of sensor data and classification models with high computational costs. Here, a novel gesture recognition system with triboelectric smart wristbands and an adaptive accelerated learning (AAL) model is proposed. The sensor array is well deployed according to the wrist anatomy and retrieves hand motions from a distance, exhibiting highly sensitive and high‐quality sensing capabilities beyond existing methods. Importantly, the anatomical design leads to the close correspondence between the actions of dominant muscle/tendon groups and gestures, and the resulting distinctive features in sensor signals are very valuable for differentiating gestures with data from 7 sensors. The AAL model realizes a 97.56% identification accuracy in training 21 classes with only one‐third operands of the original neural network. The applications of the system are further exploited in real‐time somatosensory teleoperations with a low latency of

Abstract Olfactory plays an important role in virtual reality technology. In this work, a bionic fibrous membrane (BFM) integrated with the function of electrostatic field accelerated evaporation (EFAE) is applied for realizing the virtual olfactory generation (VOG) system. The BFM is capable of self‐driven unidirectional liquid transmission and EFAE process is induced on BFM by using an ultrafast voltage‐elevation triboelectric nanogenerator (UVE‐TENG). The output voltage from UVE‐TENG can reach 8 kV within 40 ms, which is enough to maintain all of the functions of VOG system. Meanwhile, the output current from UVE‐TENG is smaller than 1 μA, leading to a safe and human compatible system. The flow rate of the volatile liquid spray from the system emitter can reach 0.1 μl/s, and the average evaporation rate of the BFM device with integrated EFAE function is 0.12 mg/s. Accordingly, the user of this VOG system can feel the generation of odor within 3 s, while the switching of different odor channels can be wirelessly controlled by a mobile phone. This VOG system enhances the user's immersive and interactive experience for virtual reality technology. The similar system composed of UVE‐TENG, reed switch, BFM and EFAE devices also has potential application value in assisted breathing treatment and nasal delivery.