Search

Ferroelectric properties of hafnium-based thin films have gained significant interest, yet the fundamental mechanisms responsible for the emergence of the ferroelectric phase continue to be inadequately investigated. In contrast with polycrystalline films fabricated by atomic layer deposition or sputter methods, which possess uncertainty in polarization orientation, epitaxial ferroelectric HfO2-based materials are less investigated, especially for factors such as electric field and oxygen vacancy, which are proposed and examined for their potential impacts on phase stability. In this study, Y-doped hafnium oxide (HYO) ferroelectric epitaxial films were fabricated using pulsed laser deposition, with variations in oxygen pressure during the deposition process. Structural and electrical analyses of HYO epitaxial ferroelectric films prepared under differing oxygen pressures revealed a correlation between the ferroelectric properties of the films and the oxygen content. An optimal selection of oxygen pressure was found to be conducive to the formation of HYO epitaxial ferroelectric films, presenting a promising avenue for future ferroelectric memory applications. [ABSTRACT FROM AUTHOR]

ABSTRACT: The tons of keratin waste are produced by the poultry and meat industry which is an insoluble and protein-rich material found in hair, feathers, wool, and some epidermal wastes. These waste products could be degraded and recycled to recover protein, which can save our environment. One of the potential strategy to achieve this target is use of microbial biotreatment which is more convenient, cost-effective, and environment-friendly by formulating hydrolysate complexes that could be administered as protein supplements, bioactive peptides, or animal feed ingredients. Keratin degradation shows great promise for long-term protein and amino acid recycling. According to the MEROPS database, known keratinolytic enzymes currently belong to at least 14 different protease families, including S1, S8, S9, S10, S16, M3, M4, M14, M16, M28, M32, M36, M38, and M55. In addition to exogenous attack (proteases from families S9, S10, M14, M28, M38, and M55), the various keratinolytic enzymes also function via endo-attack (proteases from families S1, S8, S16, M4, M16, and M36). Biotechnological methods have shown great promise for enhancing keratinase expression in different strains of microbes and different protein engineering techniques in genetically modified microbes such as bacteria and some fungi to enhance keratinase production and activity. Some microbes produce specific keratinolytic enzymes that can effectively degrade keratin substrates. Keratinases have been successfully used in the leather, textile, and pharmaceutical industries. However, the production and efficiency of existing enzymes need to be optimized before they can be used more widely in other processes, such as the cost-effective pretreatment of chicken waste. These can be improved more effectively by using various biotechnological applications which could serve as the best and novel approach for recycling and degrading biomass. This paper provides practical insights about molecular strategies to enhance keratinase expression to effectively utilize various poultry wastes like feathers and feed ingredients like soybean pulp. Furthermore, it describes the future implications of engineered keratinases for environment friendly utilization of wastes and crop byproducts for their better use in the poultry feed industry.

We report on the magnetic coupling behavior in all-ferromagnetic La0.7Sr0.3MnO3/SrRuO3 (LSMO/SRO) heterostructures deposited on the SrTiO3 (111) substrate, where the interface leads to an enhanced exchange field as compared to the one deposited on SrTiO3 (001). Importantly, high-resolution scanning transmission electron microscopy reveals distinct interface structures of the (111) heterostructures depending on the growth sequence. The heterostructure with an SRO bottom layer shows an atomically flat and abrupt interface, while the one with an LSMO bottom layer shows a deformed interface due to the surface roughening of LSMO deposited directly on SrTiO3 (111). As a result, the heterostructure with an abrupt interface exhibits a robust antiferromagnetic coupling between LSMO and SRO, while the one with a rough interface shows negligible magnetic coupling. Our results demonstrate the key role of an abrupt interface in determining the magnetic properties of oxide heterostructures. [ABSTRACT FROM AUTHOR]

Retinoic acid-inducible gene I (RIG-I) is a cytosolic viral RNA receptor. Upon viral infection, the protein recognizes and then recruits adapter protein mitochondrial antiviral signaling (MAVS) protein, initiating the production of interferons and proinflammatory cytokines to establish an antiviral state. In the present study, we identify zinc finger protein 205 (ZNF205) which associates with RIG-I and promotes the Sendai virus (SeV)-induced antiviral innate immune response. Overexpression of ZNF205 facilitates interferon-beta (IFN-β) introduction, whereas ZNF205 deficiency restricts its introduction. Mechanistically, the C-terminal zinc finger domain of ZNF205 interacts with the N-terminal tandem caspase recruitment domains (CARDs) of RIG-I; this interaction markedly promotes K63 ubiquitin-linked polyubiquitination of RIG-I, which is crucial for RIG-I activation. Thus, our results demonstrate that ZNF205 is a positive regulator of the RIG-I-mediated innate antiviral immune signaling pathway.

Under ambient conditions, the only known valence state of calcium ions is +2, and the corresponding crystals with calcium ions are insulating and nonferromagnetic. Here, using cryo-electron microscopy, we report direct observation of two-dimensional (2D) CaCl crystals on reduced graphene oxide (rGO) membranes, in which the calcium ions are only monovalent (i.e. +1). Remarkably, metallic rather than insulating properties are displayed by those CaCl crystals. More interestingly, room-temperature ferromagnetism, graphene-CaCl heterojunction, coexistence of piezoelectricity-like property and metallicity, as well as the distinct hydrogen storage and release capability of the CaCl crystals in rGO membranes are experimentally demonstrated. We note that such CaCl crystals are obtained by simply incubating rGO membranes in salt solutions below the saturated concentration, under ambient conditions. Theoretical studies suggest that the formation of those abnormal crystals is attributed to the strong cation-π interactions of the Ca cations with the aromatic rings in the graphene surfaces. The findings highlight the realistic potential applications of such abnormal CaCl material with unusual electronic properties in designing novel transistors and magnetic devices, hydrogen storage, catalyzers, high-performance conducting electrodes and sensors, with a size down to atomic scale.

BackgroundThe physiological effects of HFNC devices are closely related to temperature and humidity. HFNC devices from different manufacturers may have varied performances. It is unclear whether there are differences in the humidification performance of different HFNC devices and the degree of differences.MethodsFour integrated HFNC devices (AIRVO 2, Fisher & Paykel Healthcare, Auckland, New Zealand; TNI softFlow 50, TNI Medical AG, Würzburg, Germany; HUMID-BH, RESPIRACARE, Shenyang, China; OH-70C, Micomme, Hunan, China) and a ventilator with an HFNC module (bellavista 1000, Imtmedical, Buchs, Switzerland) were evaluated using their matching circuits. The dew point temperature was set at 31, 34, and 37°C (set-DP). In MR850, it was set to non-invasive mode (34°C/−3°C) and invasive mode (40°C/−3°C), respectively. At each level of set-DP, the flow was set from 20 L/min up to its maximum set limit at a gradient of 5 L/min or 10 L/min. After stabilization, the dew point temperature, temperature, relative humidity, and flow rate of the delivered gas from the cannulas were recorded.ResultsThere were significant differences in actual-DP among these devices at any set-DP (p

Obesity significantly contributes to the progression of cardiovascular diseases (CVDs) and elevates the risk of cardiovascular mortality. Atherosclerosis, the primary pathogenic process underlying CVDs, initiates with vascular endothelial dysfunction, serving as the cornerstone of vascular lesions. Adipokines, bioactive molecules secreted by adipose tissue that regulate metabolic and endocrine functions, play a pivotal role in modulating endothelial function during atherosclerosis. This review comprehensively examines the distinct roles of various adipokines in regulating endothelial function in atherosclerosis. We categorize these adipokines into two main groups: protective adipokines, including adiponectin, FGF21, CTRP9, PGRN, Omentin, and Vaspin, and detrimental adipokines such as leptin, Chemerin, Resistin, FABP4, among others. Targeting specific adipokines holds promise for novel clinical interventions in the management of atherosclerosis-related CVDs, thereby providing a theoretical foundation for cardiovascular disease treatment strategies. [ABSTRACT FROM AUTHOR]

Rapid advancements in information and communication technologies (ICT) have accelerated the expansion of the digital economy (DE). However, the lack of a universally accepted definition has hindered a systematic assessment of the progress of the DE. A robust framework to evaluate various aspects of DE activities is crucial to fully capture the potential of the DE. This study conducts a systematic review of academic literature to identify and analyse various dimensions of the DE, aiming to propose a framework to assess the development of the DE. A comprehensive analysis of 161 articles from the Scopus database (2010-2024) identifies four core dimensions, namely digital infrastructure, digital industrialisation, industrial digitisation and digital innovation as the primary focus of existing DE research. These findings lay the groundwork for developing the framework to assess the development of the DE. [ABSTRACT FROM AUTHOR]

Fermented feed is needed to maintain the vitality of probiotics and cannot be sterilized. Fermented feeds, especially those with added CaCO3, have a high risk of contamination with pathogens. Escherichia coli, Staphylococcus aureus, and Shigella flexneri are the main pathogenic bacteria threatening animal breeding. This study developed a new microbial quantitative real-time PCR analysis method to investigate the antibacterial rule in fermented feed with different amounts of CaCO3. Moreover, using the qPCR method, we found that the feed pH decreased slowly with the increase of CaCO3 addition. In the early stage of fermentation, CaCO3 addition promoted three pathogenic bacteria growth. In the middle and late fermentation, CaCO3 addition inhibited the growth of Escherichia coli and Shigella flexneri, and the greater the CaCO3 addition, the stronger the inhibitory effect. The CaCO3 addition reduced the growth inhibition of Staphylococcus aureus, and the inhibition effect was weaker with the increase of CaCO3 addition. From the inhibitory effect on intestinal pathogenic bacteria such as Escherichia coli and Shigella flexneri, the optimal addition amount of CaCO3 was 12%. At this level of addition, the number of Lactiplantibacillus plantarum subsp. plantarum, Lacticaseibacillus rhamnosus, and Bacillus subtilis were also the highest, and the content of organic acids with antibacterial effects was also the highest. The addition of CaCO3 had an inhibitory effect on the growth of pathogenic bacteria, mainly attributed to the promotion of the growth of Lactiplantibacillus plantarum subsp. plantarum and Lacticaseibacillus rhamnosus, and the organic acid of its fermentation product had an inhibitory effect on pathogenic bacteria. This study provides theoretical guidance for the antibacterial rule of high-pH fermented feed with different amounts of CaCO3.

Abstract Background Examinations based on lung tissue specimen can play a significant role in the diagnosis for critically ill and intubated patients with lung infiltration. However, severe complications including tension pneumothorax and intrabronchial hemorrhage limit the application of needle biopsy. Methods A refined needle biopsy technique, named bronchus-blocked ultrasound-guided percutaneous transthoracic needle biopsy (BUS-PTNB), was performed on four intubated patients between August 2020 and April 2021. BUS-PTNB was done at bedside, following an EPUBNOW (evaluation, preparation, ultrasound location, bronchus blocking, needle biopsy, observation, and withdrawal of blocker) workflow. Parameters including procedure feasibility, sample acquisition, perioperative conditions, and complications were observed. Tissue specimens were sent to pathological examinations and microbial tests. Results Adequate specimens were successfully obtained from four patients. Diagnosis and treatment were correspondingly refined based on pathological and microbial tests. Intrabronchial hemorrhage occurred in patient 1 but was stopped by endobronchial blocker. Mild pneumothorax happened in patient 4 due to little air leakage, and closed thoracic drainage was placed. During the procedure, peripheral capillary hemoglobin oxygen saturation (SPO2), blood pressure, and heart rate of patient 4 fluctuated but recovered quickly. Vital signs were stable for patient 1–3. Conclusions BUS-PTNB provides a promising, practical and feasible method in acquiring tissue specimen for critically ill patients under intratracheal intubation. It may facilitate the pathological diagnosis or other tissue-based tests for intubated patients and improve clinical outcomes.

To overcome the problems with current mineral supplements for laying hens including low absorption, mineral antagonism, and high cost, we developed mineral element fermentation complexes (MEFC) by synergistically fermenting bean dregs and soybean meal with strains and proteases and complexing with mineral elements. The fermentation complexation process was optimized based on the small peptide and organic acid contents and the complexation rate of mineral elements after fermentation. The optimal conditions were as follows: the total inoculum size was 5% (v/w), 15% (w/w) wheat flour middling was added to the medium, and mineral elements (with 4% CaCO3) were added after the completion of aerobic fermentation, fermentation at 34°C and 11 days of fermentation. Under these conditions, the complexation rates of Ca, Fe, Cu, Mn, and Zn were 90.62, 97.24, 73.33, 94.64, and 95.93%, respectively. The small peptide, free amino acid, and organic acid contents were 41.62%, 48.09 and 183.53 mg/g, respectively. After 60 days of fermentation, 82.11% of the Fe in the MEFC was ferrous ions, indicating that fermentation had a good antioxidant effect on ferrous ion, and the antioxidant protection period was at least 60 days. Fourier transform infrared spectroscopy showed that the mineral ions were complexed with amino and carboxyl groups. The added mineral elements promoted microbial growth, protein degradation, and organic acid secretion and significantly improved fermentation efficiency. Animal experiments showed that MEFC had positive effects on several parameters, including production performance (average daily feed intake, P < 0.05; egg production rate, P < 0.05; and average egg weight, P < 0.05), mineral absorption, intestinal morphology (villus height to crypt depth ratio in the jejunum and ileum, P < 0.05), and blood routine and biochemical indexes (red blood cells, P < 0.05; hemoglobin, P < 0.05). This study provides theoretical support for the development of mineral complexes for laying hens via fermentation.

Abstract Background There is limited information on the difference in epidemiology, clinical characteristics and outcomes of the initial outbreak of the coronavirus disease (COVID-19) in Wuhan (the epicenter) and Sichuan (the peripheral area) in the early phase of the COVID-19 pandemic. This study was conducted to investigate the differences in the epidemiological and clinical characteristics of patients with COVID-19 between the epicenter and peripheral areas of pandemic and thereby generate information that would be potentially helpful in formulating clinical practice recommendations to tackle the COVID-19 pandemic. Methods The Sichuan & Wuhan Collaboration Research Group for COVID-19 established two retrospective cohorts that separately reflect the epicenter and peripheral area during the early pandemic. The epidemiology, clinical characteristics and outcomes of patients in the two groups were compared. Multivariate regression analyses were used to estimate the adjusted odds ratios (aOR) with regard to the outcomes. Results The Wuhan (epicenter) cohort included 710 randomly selected patients, and the peripheral (Sichuan) cohort included 474 consecutive patients. A higher proportion of patients from the periphery had upper airway symptoms, whereas a lower proportion of patients in the epicenter had lower airway symptoms and comorbidities. Patients in the epicenter had a higher risk of death (aOR=7.64), intensive care unit (ICU) admission (aOR=1.66), delayed time from illness onset to hospital and ICU admission (aOR=6.29 and aOR=8.03, respectively), and prolonged duration of viral shedding (aOR=1.64). Conclusions The worse outcomes in the epicenter could be explained by the prolonged time from illness onset to hospital and ICU admission. This could potentially have been associated with elevated systemic inflammation secondary to organ dysfunction and prolonged duration of virus shedding independent of age and comorbidities. Thus, early supportive care could achieve better clinical outcomes.

Recently, vanadium diselenide (VSe2), a member of transition metal dichalcogenides, has attracted a great deal of interest in spintronic devices and memory devices due to its unique physical properties. However, it is still a challenge to prepare a continuous VSe2 thin film which is critical for its potential application. Here, we report a continuous single-crystalline 1T-VSe2 thin film grown on mica by pulsed laser deposition. Both x-ray diffraction and high-resolution transmission electron microscopy verify the van der Waals epitaxy of the VSe2/mica heterostructure. Free-standing and flexible VSe2 thin films can be obtained and combined with integrated circuit technology, which is of great significance for the application of two-dimensional materials in the field of multifunctional flexible electronic devices. [ABSTRACT FROM AUTHOR]

Two-dimensional (2D) valleytronic materials are both fundamentally intriguing and practically appealing to explore novel physics and design next-generation devices. However, traditional control means such as optic pumping or magnetic field cannot meet the demands of modern electron devices for miniaturization, low-dissipation, and non-volatility. Thus, it is attractive to combine the ferroelectric property with valley property in a single compound. In this paper, the recent progress of ferroelectric-valley coupling is reviewed. First, we briefly recall the development of valleytronics in the past several years. Then, various structures demonstrating ferroelectric-valley coupling, including heterostructures and intrinsic materials, are introduced. Subsequently, we describe ferroelectric-valley coupling in sliding and adsorption system and the unconventional ferroelectricity in the moiré system. Finally, we discuss the research status and outlook. We hope that this perspective will be helpful to bridge the gap between valleytronics and ferroelectrics in 2D materials and inspire further exciting findings. [ABSTRACT FROM AUTHOR]

Numerous synaptic devices have been explored for the next generation of energy‐efficient computing techniques. Among them, optoelectronic synaptic devices based on semiconductor/ferroelectric heterostructures have received a lot of attention lately due to their amazing parallelism, efficiency, and fault tolerance properties. However, polarizing the ferroelectric layer or gating the dielectric layer is necessary to achieve tunable synaptic functions, which generally causes an increase in energy consumption and complex manufacturing processes. Here, a simple and efficient method is demonstrated to develop a tunable optoelectronic synaptic device based on a single ferroelectric semiconductor, BiFeO3‐BaTiO3 (BF‐BT). Multi‐essential synaptic functions including short‐term plasticity, paired‐pulse facilitation, and long‐term plasticity are all satisfactorily replicated by the memristor device. More significantly, light‐controllable synaptic behaviors are realized by altering the ferroelectric polarization state of BF‐BT. Synaptic devices' relaxation characteristics enable simulation of the effects of positive/negative emotions on learning and forgetting processes. This study highlights the potential of the ferroelectric semiconductor memristor in constructing the efficient optoelectronic synapses for future neuromorphic electronics with the ability to learn and sense optical information. [ABSTRACT FROM AUTHOR]

Freestanding membranes provide a unique opportunity to integrate complex oxides with mature semiconductor technologies and flexible electronics. It is known that the physical functionalities of complex oxides can be modified by epitaxial strain induced by the underneath substrates. The strain release may degrade the physical properties of the freestanding oxide membranes. Here, we demonstrate that various strain states in the pristine epitaxial films can be well preserved in the freestanding single-crystal SrRuO3 (SRO) membranes using the sacrificial layers with high lattice flexibility. Tensile and compressive strains are induced by the water-soluble sacrificial layers of Sr3Al2O6 (SAO) and Sr2CaAl2O6 (SCAO) on SrTiO3 substrates, respectively. An atomically flat surface morphology and initial strain states are maintained in the freestanding SRO membranes after etching the SAO and SCAO layers in water. In light of this, the electrical and magnetic properties of the SRO membranes are comparable to those of the corresponding strained films before exfoliation but completely different from those of the fully relaxed SRO films. The robust strain in the freestanding membranes offers the ability to integrate the strain-modified functionality of complex oxides with the conventional silicon-based semiconductor or flexible electronics. [ABSTRACT FROM AUTHOR]

Background: High-flow nasal cannula (HFNC) may help avoid intubation of hypoxemic patients suffering from COVID-19; however, it may also contribute to delaying intubation, which may increase mortality. Here, we aimed to identify the predictors of HFNC failure among patients with COVID-19.Methods: We performed a multicenter retrospective study in China from January 15 to March 31, 2020. Two centers in Wuhan (resource-limited centers) enrolled 32 patients, and four centers outside Wuhan enrolled 34 cases. HFNC failure was defined as the requirement of escalation therapy (NIV or intubation). The ROX index (the ratio of SpO2/FiO2 to the respiratory rate) was calculated.Results: Among the 66 patients, 29 (44%) cases experienced HFNC failure. The ROX index was much lower in failing patients than in successful ones after 1, 2, 4, 8, 12, and 24 h of HFNC. The ROX index was independently associated with HFNC failure (OR = 0.65; 95% CI: 0.45–0.94) among the variables collected before and 1 h after HFNC. To predict HFNC failure tested by ROX index, the AUC was between 0.73 and 0.79 for the time points of measurement 1–24 h after HFNC initiation. The HFNC failure rate was not different between patients in and outside Wuhan (41% vs. 47%, p = 0.63). However, the time from HFNC initiation to intubation was longer in Wuhan than that outside Wuhan (median 63 vs. 22 h, p = 0.02). Four patients in Wuhan underwent intubation due to cardiac arrest; in contrast, none of the patients outside Wuhan received intubation (13 vs. 0%, p = 0.05). The mortality was higher in Wuhan than that out of Wuhan, but the difference did not reach statistical significance (31 vs. 12%, p = 0.07).Conclusion: The ROX index can be used to predict HFNC failure among COVID-19 patients to avoid delayed intubation, which may occur in the resource-limited area.

Background. High-flow nasal cannula (HFNC) oxygen therapy has been recommended for use in coronavirus disease 2019 (COVID-19) patients with acute respiratory failure and many other clinical conditions. HFNC devices produced by different manufacturers may have varied performance. Whether there is a difference in these devices and the extent of the differences in performance remain unknown. Methods. Four HFNC devices (AIRVO 2, TNI softFlow 50, HUMID-BH, and OH-70C) and a ventilator with an HFNC module (bellavista 1000) were evaluated. The flow was set at 20, 25, 30, 35, 40, 45, 50, 60, 70, and 80 L/min, and the FiO2 was set at 21%, 26%, 30%, 35%, 40%, 45%, 50%, 60%, 70%, 80%, and 90%. Then, one side of the cannulas was clipped to simulate the compression, bending, or blocking of the nasal cannulas. The flow and FiO2 of the delivered gas were recorded and compared among settings and devices. Results. The actual-flow and actual-FiO2 delivered by different settings and devices varied. AIRVO 2 had superior performance in flow and FiO2 accuracy. bellavista 1000 and OH-70C had good performance in the accuracy of actual-flows and actual-FiO2, respectively. bellavista 1000 and HUMID-BH had a larger flow range from 10 to 80 L/min, but only bellavista 1000 could provide a stable flow with an excessive resistance up to 60 L/min. TNI softFlow 50 had the best flow compensation and could provide sufficient flow with excessive resistance at 20–50 L/min. Conclusions. The variation in flow, FiO2 settings, and devices could influence the actual-flow and actual-FiO2 delivered. AIRVO 2 and OH-70C showed better FiO2 accuracy. TNI softFlow 50, bellavista 1000, and HUMID-BH could lower the risk of insufficient flow support due to accidental compression or blocking of the cannulas. In addition, ventilators with HFNC modules provided comparable flow and FiO2 and could be an alternative to standalone HFNC devices.

ObjectiveTo estimate the prevalence of disability and anxiety in Covid-19 survivors at discharge from hospital and analyze relative risk by exposures.DesignMulti-center retrospective cohort study.SettingTwenty-eight hospitals located in eight provinces of China.MethodsA total of 432 survivors with laboratory-confirmed SARS CoV-2 infection participated in this study. At discharge, we assessed instrumental activities of daily living (IADL) with Lawton's IADL scale, dependence in activities of daily living (ADL) with the Barthel Index, and anxiety with Zung's self-reported anxiety scale. Exposures included comorbidity, smoking, setting (Hubei vs. others), disease severity, symptoms, and length of hospital stay. Other risk factors considered were age, gender, and ethnicity (Han vs. Tibetan).ResultsPrevalence of at least one IADL problem was 36.81% (95% CI: 32.39-41.46). ADL dependence was present in 16.44% (95% CI: 13.23-20.23) and 28.70% (95% CI: 24.63-33.15) were screened positive for clinical anxiety. Adjusted risk ratio (RR) of IADL limitations (RR 2.48, 95% CI: 1.80-3.40), ADL dependence (RR 2.07, 95% CI 1.15-3.76), and probable clinical anxiety (RR 2.53, 95% CI 1.69-3.79) were consistently elevated in survivors with severe Covid-19. Age was an additional independent risk factor for IADL limitations and ADL dependence; and setting (Hubei) for IADL limitations and anxiety. Tibetan ethnicity was a protective factor for anxiety but a risk factor for IADL limitations.ConclusionA significant proportion of Covid-19 survivors had disability and anxiety at discharge from hospital. Health systems need to be prepared for an additional burden resulting from rehabilitation needs of Covid-19 survivors.