Search

Recently, considerable work has been directed at the development of an ultracompact X-ray free-electron laser (UCXFEL) based on emerging techniques in high-field cryogenic acceleration, with attendant dramatic improvements in electron beam brightness and state-of-the-art concepts in beam dynamics, magnetic undulators, and X-ray optics. A full conceptual design of a 1 nm (1.24 keV) UCXFEL with a length and cost over an order of magnitude below current X-ray free-electron lasers (XFELs) has resulted from this effort. This instrument has been developed with an emphasis on permitting exploratory scientific research in a wide variety of fields in a university setting. Concurrently, compact FELs are being vigorously developed for use as instruments to enable next-generation chip manufacturing through use as a high-flux, few nm lithography source. This new role suggests consideration of XFELs to urgently address emerging demands in the semiconductor device sector, as identified by recent national need studies, for new radiation sources aimed at chip manufacturing. Indeed, it has been shown that one may use coherent X-rays to perform 10–20 nm class resolution surveys of macroscopic, cm scale structures such as chips, using ptychographic laminography techniques. As the XFEL is a very promising candidate for realizing such methods, we present here an analysis of the issues and likely solutions associated with extending the UCXFEL to harder X-rays (above 7 keV), much higher fluxes, and increased levels of coherence, as well as methods of applying such a source for ptychographic laminography to microelectronic device measurements. We discuss the development path to move the concept to rapid realization of a transformative XFEL-based application, outlining both FEL and metrology system challenges.

Electrons in an x-ray free electron laser (XFEL) develop periodic density fluctuations, known as microbunches, which enable the exponential gain of x-ray power in an XFEL. When an electron beam microbunched at a hard x-ray wavelength is kicked, microbunches are often washed out due to the dispersion and R_{56} of the bend. An achromatic (dispersion-free) bend with a small R_{56}, however, can preserve microbunches, which rotate to follow the new trajectory of the electron bunch. Rotated microbunches can subsequently interact in a repointed undulator to produce a new beam of off-axis x rays. In this work, we demonstrate hard x-ray multiplexing in the Linac Coherent Light Source hard x-ray undulator line using microbunch rotation through a 10 μrad first-order-achromatic bend created by transversely offsetting quadrupole magnets in the FODO lattice. Quadrupole offsets are determined analytically from beam-matrix theory. We also discuss the application of microbunch rotation to out-coupling a cavity-based XFEL.

There is a growing interest in designing and building compact X-ray Free Electron Lasers (FELs) for scientific and industry applications. In this paper, we report an X-ray Regenerative Amplifier FEL (XRAFEL) design based on a proposed Ultra Compact X-ray FEL configuration. Our results show that an XRAFEL can dramatically enhance the temporal coherence and increase the spectral brightness of the radiation in the hard X-ray regime without increasing the footprint of the FEL configuration. The proposed compact, fully coherent, and high-flux hard X-ray source holds promise as a valuable candidate for a wide range of high-impact applications in both academia and industry.

Accelerator-based x-ray free-electron lasers (XFELs) are the latest addition to the revolutionary tools of discovery for the 21st century. The two major components of an XFEL are an accelerator-produced electron beam and a magnetic undulator, which tend to be kilometer-scale long and expensive. A proof-of-principle demonstration of free-electron lasing at 27 nm using beams from compact laser wakefield accelerators was shown recently by using a magnetic undulator. However, scaling these concepts to x-ray wavelengths is far from straightforward as the requirements on the beam quality and jitters become much more stringent. Here, we present an ultracompact scheme to produce tens of attosecond x-ray pulses with several GW peak power utilizing a novel aspect of the FEL instability using a highly chirped, prebunched, and ultrabright tens of MeV electron beam from a plasma-based accelerator interacting with an optical undulator. The FEL resonant relation between the prebunched period and the energy selects resonant electrons automatically from the highly chirped beam which leads to a stable generation of attosecond x-ray pulses. Furthermore, two-color attosecond pulses with subfemtosecond separation can be produced by adjusting the energy distribution of the electron beam so that multiple FEL resonances occur at different locations within the beam. Such a tunable coherent attosecond x-ray sources may open up a new area of attosecond science enabled by x-ray attosecond pump/probe techniques.

High-gain free-electron lasers (FELs) are becoming important light sources at short wavelengths such as the EUV and x-ray regimes. A particularly promising concept is the regenerative amplifier FEL (RAFEL), which can greatly increase the brightness and stability of a single pass device. One of the critical challenges of the x-ray RAFEL is maintaining electron-optical overlap over the relatively large (hundreds of meters) footprint of the system. Numerical modeling of x-ray RAFELs with angular and positional errors is critical for designing stable cavities, as well as to predict signatures of specific misalignment effects. Full-scale simulations of x-ray FELs are incredibly time consuming, making large-scale parameter searches intractable on reasonable timescales. In this paper, we present a semi-analytical model that allows to investigate realistic scenarios—x-ray cavity without gain (“cold cavity” or x-ray FEL oscillator) and x-ray RAFEL—in the presence of angular/positional errors and electron trajectory oscillation. We especially focus on fast modeling of the FEL process and x-ray optics, while capturing effects pertaining to actual experimental setups at the Linac Coherent Light Source (LCLS) at SLAC. Such a method can be used to explore RAFEL at other wavelengths by suitable replacement of the optics modeling.

The microstructure, mechanical properties, and corrosion resistance of TA10 titanium alloy annealed via different cooling methods were investigated. After annealing, the intergranular β phase decreases, and most of the strip α phase changes to the equiaxed α phase. The grain size of the equiaxed α phase is the largest, and the content of the primary α phase is the lowest at the longest annealing cooling time. The TA10 titanium alloy sheet with furnace cooling shows better plasticity than that with air cooling. The tensile strength and Vickers hardness gradually decrease with increasing furnace cooling time, and the elongation increases Different annealing cooling methods result in the same corrosion behavior, but the corrosion resistance is different. The sample with the longest cooling time has the highest corrosion resistance. Prolonging the cooling time after annealing is helpful to improve the corrosion resistance of titanium alloy.

The multiplexing capabilities of superconducting X-ray free-electron lasers (FELs) have gained much attention in recent years. The demanding requirements for photon properties from multiple undulator lines necessitate more flexible beam manipulation techniques to achieve the goal of “beam on demand”. In this paper, we investigate a multiplexed configuration for the photoinjector of high-repetition-rate FELs that aims to simultaneously provide low-emittance electron beams of different charges. A parallel, multi-objective genetic algorithm is implemented for the photoinjector parameter optimization. The proposed configuration could drastically enhance the flexibility of beam manipulation to improve multiplexing capabilities and realize the full potential of the facility.

Ultrashort circularly polarised light pulses from free-electron lasers offer a route for exploring chiral molecules and their dynamics, but remain challenging to harness. Here, X-ray pump-probe experiments enable a site-specific photoelectron circular dichroism measurement on a dissociating chiral molecule.

The effects of annealing time on microstructure, mechanical properties, and corrosion resistance of Ti-0.3Mo-0.8Ni (TA10) titanium alloy hot-rolled sheets are investigated. With the increase in annealing time, the α → β phase transition occurs, and the grain size grows gradually. The strength deteriorates, and elongation increases. The grains grow up, the number of grain boundaries decreases, and intergranular corrosion decreases. With the increase in the annealing time, the corrosion kinetics and thermodynamics are enhanced. When annealed at 780 °C for 2 h, TA10 alloy sheets exhibit the best comprehensive properties, and its microstructure is composed of fine equiaxed α phase. The mechanical properties and corrosion resistance are improved.

The space truss deployable antenna has low natural frequency, multi-closed-loop, and multiredundant structure characteristics, which is a kind of flexible antenna. It is hard to obtain the vibration characteristics under low frequency by finite element analysis or conventional shaking table test. To verify the structure characteristics of the antenna in the folded state below 2 Hz, a low-frequency vibration system is established based on the 6-DOF Stewart platform. Rotation matrix analysis method was adopted to obtain the platform’s velocity and acceleration characteristics. Then, a low-frequency vibration test was carried out on the platform. The results show that the natural frequency of the antenna is 1.51 Hz and the maximum dynamic displacement is 140.6 mm, which provides a certain foundation for the further development of the space truss antenna.

The deployment of a modular truss antenna reflector is relied on the driven energy of the springs between the components of the structure. The deployment process is characterized by fast speed and large impact. In order to study the impact characteristics of antenna deployment on the boundary, the deployment dynamic analysis of a modular truss antenna reflector is carried out. The deployment impact experiment is performed to obtain the impact forces of the reflector on the boundary. The dynamic model of the modular truss reflector is modified according to the experiment results. The dynamic analysis of a satellite with an arm and a modular truss reflector is conducted by using the modified reflector model. The dynamic behavior of the satellite in orbit during the modular truss antenna reflector deployment is predicted.

Ti-6Al-4V (Ti64 or TC4) alloy is widely used in the industrial field. However, there have been few studies of the TC4 alloy melted by electron beam cold hearth melting (EBCHM) technology. Aging treatment has a considerable influence on the secondary α-phase in titanium alloys. Therefore, TC4 alloy melted by EBCHM technology was investigated in this study. The effect of different aging times on the microstructural evolution and mechanical properties of titanium alloy sheets was evaluated. The results showed that, with increase in aging time, the primary α-phase enlarged and grain globularization occurred. In addition, some transformed β-phases disappeared. The strength and Vickers hardness of the heat-treated sheets decreased, while the plasticity increased with increase in aging time, indicating that the mechanical properties developed with evolution of the microstructure. After aging at 560 °C for 2 h, the properties overall were optimal. The type of fracture of the samples was ductile fracture; the dimples became larger with increase in aging time. After heat treatment, the recrystallized nucleus, substructures and HAGBs increased, while the deformed structure and LAGBs decreased. Some grains had rotated following heat treatment, indicating that anisotropy was greatly reduced.

Vector field analysis is presented for a highly overmoded iris-line structure that can act as a medium of transportation for THz radiation. The axisymmetric structure is capable of supporting hybrid modes with desirable features such as low propagation loss, uniformly linear polarization and approximately Gaussian intensity profile across the iris. A specific application that can benefit from these desirable features is the transportation of THz undulator radiation over hundreds of meters to reach the experimental halls at the Linac Coherent Light Source (LCLS) facility at SLAC, Stanford. Such a structure has been modeled before as a boundary-value problem using Vainstein’s complex-impedance boundary condition and assuming infinitely thin screens. Given that physical realizations of such screens must have finite thickness and that the THz wavelength in the 3–15 THz range is expected to be smaller than convenient screen thicknesses in practice, the question of the impact of finite screen thickness on propagation performance becomes rather pressing. To address this question, we present a mode-matching analysis of the structure as an open resonator with finite screen thickness and perturbatively clustered (localized) field expansions, for computational feasibility. The effect of screen thickness is seen to lower the attenuation constant on the iris line, which is dominated by diffraction loss. Ohmic loss due to the finite conductivity of metallic surfaces at the screen edges is found to be small compared to diffraction loss. The propagation loss predictions based on the Vainstein model are compared with the numerical results from mode matching for infinitely thin screens, where the former method is observed to agree with the numerical results better at higher Fresnel numbers (highly overmoded structures). The properties of the dominant mode fields are formally derived from first principles and a recommended approach is discussed for the inclusion of screen-thickness effects into propagation loss estimations.

Generally, turn-to-turn fluctuations of synchrotron radiation power in a storage ring depend on the 6D phase-space distribution of the electron bunch. This effect is related to the interference of fields radiated by different electrons. Changes in the relative electron positions and velocities inside the bunch result in fluctuations in the total emitted energy per pass in a synchrotron radiation source. This effect has been previously described assuming constant and equal electron velocities before entering the synchrotron radiation source. In this paper, we present a generalized formula for the fluctuations with a non-negligible beam divergence. Further, we corroborate this formula in a dedicated experiment with undulator radiation in the Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab. Lastly, possible applications in beam instrumentation are discussed.

In a storage ring, turn-to-turn fluctuations in the intensity of spontaneous synchrotron radiation occur due to two mechanisms. The first mechanism is the quantum uncertainty in the number of emitted photons. The second mechanism is the turn-to-turn variations in the relative positions of classical pointlike electrons in the bunch. We present a unified description of both effects in the framework of quantum optics. We derive an equation for the fluctuations for an arbitrary degree of coherence, which generalizes previously reported results for temporally incoherent radiation. We compare the predictions of our calculation with a previous experiment at Brookhaven National Laboratory, where the latter mechanism was dominant and propose a new dedicated experiment in the Integrable Optics Test Accelerator (IOTA) at Fermilab, where the two mechanisms may have comparable contributions to the fluctuations. Finally, our calculation shows that the magnitude of the fluctuations is rather sensitive to the dimensions and the shape of the electron bunch, thereby indicating possible applications in beam instrumentation. In particular, the small vertical size of the flat beams in IOTA may be estimated via these fluctuations, whereas measurement by a conventional synchrotron radiation monitor is difficult due to the diffraction limit.

The generation of femtosecond soft x-ray free-electron laser (XFEL) pulses with an energy of hundreds of microjoules has been demonstrated at the Linac Coherent Light Source (LCLS) based on fresh-slice multistage amplifications. In this paper, we present a comprehensive simulation analysis and methods to improve fresh-slice multistage XFELs. A time-dependent transverse kick along the bunch is generated by two passive corrugated structures. The resulting oscillating orbit is controlled by downstream kickers, enabling different slices of the bunch to lase. The simulations reproduce the LCLS experimental results in terms of the pulse energy, bandwidth, and statistics of spectral spikes. The simulations reveal time-domain pulse profile properties, such as the pulse duration and structure, that were unavailable experimentally. We discuss possible issues connected with the accelerator setup and propose a simpler and more robust variation of the scheme to generate XFEL pulses shorter than 3 fs.

In this paper we demonstrate experimentally the generation of attosecond soft x-ray free-electron laser (XFEL) pulses based on a novel approach to enhanced self-amplified spontaneous emission. Instead of utilizing an external laser, we shape the electron beam at the cathode by laser pulse stacking. We enhance the high-current spike in the beam profile through a self-compression process which uses short-range coherent synchrotron radiation in a wiggler and a downstream magnetic chicane. The undulator taper is then matched with the energy chirp along the beam for attosecond XFEL generation. Start-to-end simulations are performed to demonstrate the proposed method. The measured spectra suggest that a ∼250 as pulse duration is achieved at ∼940 eV in the experiment.

Self-seeding is one of the most promising methods to improve the longitudinal coherence and spectral purity of free-electron lasers (FELs). Measurements of the multishot-averaged, soft x-ray self-seeding spectrum at the Linac Coherent Light Source (LCLS) FEL often have a pedestal-like distribution around the seeded wavelength. In this paper, a theoretical model based on the mechanism of spectral sideband generation is developed to explain the statistical behavior of the seed and pedestal. The model is in good agreement with statistical analysis of numerical FEL simulations and experimental measurements that show that pedestal fluctuations reflect the level of long-wavelength microbunching structures in the beam, and are driven by fluctuations of the seed.

The tetrahedral elements that make up the large deployable reflector (LDR) are a kind of metamorphic element, which belongs to the multi-loop coupling mechanism. Firstly, the method of combining topology with screw theory is put forward. The parametric model and the constrained matrix are established to analyze the malleability of 3RR-3RRR tetrahedral element. Secondly, the kinematics expression of each motion pair is deduced by the relationship between the velocity and the motion spinor. Finally, the configuration of the metamorphic element is optimized to make the parabolic antenna fully folded, so that the antenna can meet the maximum folding ratio. The results show that the 3RR-3RRR element is a single-degree of freedom (DOF) mechanism. What’s more, three new configurations 3RS-3RRR, 3SR-3RRR and 3UU-3RRR are obtained on the basis of optimization. In particular, it proves to be that the LDR which consists of the 3RS-3RRR metamorphic element can achieve the maximum folding ratio. This paper provides a theoretical basis for the computer-aided design of the truss antennas, which has an excellent applicability in the field of aerospace and other multi-loop coupling mechanism.

Measurements of the soft x-ray, self-seeding spectrum at the Linac Coherent Light Source (LCLS) free-electron laser generally display a pedestal-like distribution around the central seeded wavelength. This pedestal limits the spectral purity and can negatively affect some user applications not employing a post-undulator monochromator. In this paper, we investigate the detailed experimental characteristics of both the amplified seed and its accompanying pedestal using data from a number of separate LCLS shifts over the 2015-2018 time period. We find that the amplified seed shows excellent wavelength stability and an exponential growth rate whose dependence upon energy detuning is consistent with theory. The pedestal’s spectral distribution and integrated strength vary strongly shot by shot, independent of electron beam energy jitter. Its shot-averaged strength relative to that of the seed grows at least linearly with z and can approach values of 15% or more. The pedestal is comprised of two separate components: (1) normal self-amplified spontaneous emission (SASE) whose total strength is nominally insensitive to energy detuning and laser heater (LH) strength; (2) sideband-like emission whose strength positively correlates with that of the amplified seed and negatively with energy detuning and LH strength. We believe this latter, non-SASE component arises from comparatively long wavelength (i.e., λ∼0.3–3 μm) amplitude and phase modulations of the main seeded radiation line. Its shot to shot variability and LH sensitivity suggests an origin connected to growth of the longitudinal microbunching instability on the electron beam.

Coherent emission from a microbunched electron beam is the driving force behind the revolution in light sources, enabling x-ray free-electron lasers (FELs) to emit pulses 9 orders of magnitude brighter than previous sources. Microbunches form perpendicular to the electron travel direction, and the conventional understanding is that they shear rather than rotate in response to a transverse kick, locking FEL facilities into a single-user operating mode. In this paper, we show that microbunches rotate toward the new direction of travel if the electron beam is kicked and defocused. We provide evidence that microbunch rotation explains the unexpectedly large amount of off-axis radiation observed during experiments at the Linac Coherent Light Source. We demonstrate that LCLS can be multiplexed into at least three separate beams using this principle. Finally, we propose using a magnetic triplet to rotate microbunches through significantly larger angles without microbunch degradation. This new understanding of microbunch dynamics can lead to significantly improved multiplexing at FEL facilities, microbunch preservation through a bend, and x-ray pulses with a pulse-front tilt.

The method of enhanced self-amplified spontaneous emission (eSASE) is one of the strongest candidates for the generation of sub-femtosecond x-ray pulses in a free-electron laser (FEL). The optimization of an eSASE experiment involves many independent parameters, which makes the exploration of the parameter space with thee-dimensional (3D) simulations computationally intensive. Therefore, a robust theoretical analysis of this problem is extremely desirable. We provide a self-consistent, analytical treatment of such a configuration using a one-dimensional (1D), time-dependent FEL model that includes the key effects of electron beam chirp and undulator taper. Verified via comparison with numerical simulation, our formalism is utilized in parameter studies that seek to determine the optimum setup of the FEL.

The microbunching instability is known to be detrimental to x-ray free electron laser performance. At the Linear Coherent Light Source, the microbunching instability is suppressed with a laser heater, which increases the uncorrelated energy spread of e-beam in the injector. While the current system has been shown to improve x-ray brightness, other laser architectures could further enhance performance. In this study, we model the interaction between a laser and e-beam with arbitrary transverse profiles and examine the effect of various laser designs on the energy distribution of the electrons after the injector and laser heater, as well as their ability to suppress microbunching instability. This simulation incorporates random transverse jitter in order to reproduce physically representative operation of the Linac Coherent Light Source. We compare Gaussian and Laguerre-Gaussian modes, and explore composite beams in the form of an array of Gaussian beamlets. We conclude that the Gaussian laser profile is highly susceptible to e-beam ellipticity and random transverse jitter. The Laguerre-Gaussian profile, a mathematically ideal solution to suppressing microbunching, is less susceptible to these effects and can provide effective suppression even with a distorted e-beam, though performance can be improved by increasing stabilization. The array of beamlets presents a solution that produces consistent and smooth energy distributions with significantly less variance in heating than the Laguerre-Gaussian profile.

The RadiaBeam/SLAC dechirper, a structure consisting of pairs of flat, metallic, corrugated plates, has been installed just upstream of the undulators in the Linac Coherent Light Source (LCLS). As a dechirper, with the beam passing between the plates on axis, longitudinal wakefields are induced that can remove unwanted energy chirp in the beam. However, with the beam passing off axis, strong transverse wakes are also induced. This mode of operation has already been used for the production of intense, multicolor photon beams using the fresh-slice technique, and is being used to develop a diagnostic for attosecond bunch length measurements. Here we measure, as a function of offset, the strength of the transverse wakefields that are excited between the two plates, and also for the case of the beam passing near to a single plate. We compare with analytical formulas from the literature, and find good agreement. This report presents the first systematic measurements of the transverse wake strength in a dechirper, one that has been excited by a bunch with the short pulse duration and high energy found in an x-ray free electron laser.

The microbunching instability driven by beam collective effects in a linear accelerator of a free-electron laser (FEL) facility significantly degrades the electron beam quality and FEL performance. A conventional method to suppress this instability is to introduce an additional uncorrelated energy spread by laser-electron interaction, which has been successfully operated in the Linac Coherent Light Source and Fermi@Elettra, etc. Some other ideas are recently proposed to suppress the instability without increasing energy spread, which could benefit the seeded FEL schemes. In this paper, we propose a reversible electron beam heater using two transverse gradient undulators to suppress the microbunching instability. This scheme introduces both an energy spread increase and a transverse-to-longitudinal phase space coupling, which suppress the microbunching instabilities driven by both longitudinal space charge and coherent synchrotron radiation before and within the system. Finally the induced energy spread increase and emittance growth are reversed. Theoretical analysis and numerical simulations are presented to verify the feasibility of the scheme and indicate the capability to improve the seeded FEL radiation performance.

A novel method using high-power laser as a circular deflector is proposed for the measurement of femtosecond (fs) and sub-fs electron beam. In the scheme, the electron beam interacts with a laser pulse operating in a radially polarized doughnut mode (TEM_{01^{*}}) in a helical undulator, generating angular kicks along the beam in two directions at the same time. The phase difference between the two angular kicks makes the beam form a ring after a propagation section with appropriate phase advance, which can reveal the current profile of the electron beam. Detailed theoretical analysis of the method and numerical results with reasonable parameters are both presented. It is shown that the temporal resolution can reach up to ∼100 attosecond, which is a significant improvement for the diagnostics of ultrashort electron beam.

We propose a method based on the slice energy spread modulation to generate strong subpicosecond density bunching in high-intensity relativistic electron beams. A laser pulse with periodic intensity envelope is used to modulate the slice energy spread of the electron beam, which can then be converted into density modulation after a dispersive section. It is found that the double-horn slice energy distribution of the electron beam induced by the laser modulation is very effective to increase the density bunching. Since the modulation is performed on a relativistic electron beam, the process does not suffer from strong space charge force or coupling between phase spaces, so that it is straightforward to preserve the beam quality for terahertz (THz) radiation and other applications. We show in both theory and simulations that the tunable radiation from the beam can cover the frequency range of 1–10 THz with high power and narrow-band spectra.

In a free-electron laser, a transverse momentum offset (or “kick”) results in an oscillation of the centroid of the electron beam about the undulator axis. Studying the influence of this effect on the free-electron laser (FEL) interaction is important both from a tolerance point of view and for its potential diagnostic applications. In this paper, we present a self-consistent theoretical analysis of a high-gain FEL driven by such a “kicked” beam. In particular, we derive a solution to the three-dimensional, linearized initial value problem of the FEL through an orthogonal expansion technique and also describe a variational method for calculating the average FEL growth rate. Our results are benchmarked with genesis simulations and provide a robust theoretical background for a comparison with previous analytical results.

Utilizing laser-driven plasma accelerators (LPAs) as a high-quality electron beam source is a promising approach to significantly downsize the x-ray free-electron laser (XFEL) facility. A multi-GeV LPA beam can be generated in several-centimeter acceleration distance, with a high peak current and a low transverse emittance, which will considerably benefit a compact FEL design. However, the large initial angular divergence and energy spread make it challenging to transport the beam and realize FEL radiation. In this paper, a novel design of beam transport system is proposed to maintain the superior features of the LPA beam and a transverse gradient undulator (TGU) is also adopted as an effective energy spread compensator to generate high-brilliance FEL radiation. Theoretical analysis and numerical simulations are presented based on a demonstration experiment with an electron energy of 380 MeV and a radiation wavelength of 30 nm.

We propose a novel scheme to generate attosecond soft x rays in a self-seeded free-electron laser (FEL) suitable for enabling attosecond spectroscopic investigations. A time-energy chirped electron bunch with additional sinusoidal energy modulation is adopted to produce a short seed pulse through a self-seeding monochromator. This short seed pulse, together with high electron current spikes and a cascaded delay setup, enables a high-efficiency FEL with a fresh bunch scheme. Simulations show that using the Linac Coherent Light Source (LCLS) parameters, soft x-ray pulses with a FWHM of 260 attoseconds and a peak power of 0.5 TW can be obtained. This scheme also has the feature of providing a stable central wavelength determined by the self-seeding monochromator.

Measurements of the multishot-averaged, soft x-ray, self-seeding spectrum at the LCLS free-electron laser often have a pedestal-like distribution around the seeded wavelength, which limits the spectral purity and can negatively affect some user applications not employing a post-undulator monochromator. In this paper, we study the origins of such pedestals, focusing on longitudinal phase space modulations produced by the microbunching instability upstream of the free-electron laser (FEL) undulator. We show from theory and numerical simulation that both energy and density modulations can induce sidebands in a high-gain, seeded FEL whose fractional strength typically grows as the square of the undulator length. The results place a tight constraint on the longitudinal phase space uniformity of the electron beam for a seeded FEL, possibly requiring the amplitude of long-wavelength modulations to be much smaller than the typical incoherent energy spread if the output sideband power is to remain only a couple percent or less of the amplified seed power.

Two closely spaced electron bunches have attracted strong interest due to their applications in two color X-ray free-electron lasers as well as witness bunch acceleration in plasmas and dielectric structures. In this paper, we propose a new scheme of delay system to vary the time delay up to several picoseconds while not affecting the bunch compression. Numerical simulations based on the Linac Coherent Light Source are performed to demonstrate the feasibility of this method.

The recent development of two-color x-ray free-electron lasers, as well as the successful demonstration of high-gradient witness bunch acceleration in a plasma, have generated strong interest in electron bunch trains, where two or more electron bunches are generated, accelerated and compressed in the same accelerating bucket. In this paper we analyze a twin-bunch technique in a high-energy linac, such as the Linac Coherent Light Source. This method allows the generation of two electron bunches with high peak current and independent control of time delay and energy separation. We find that the wakefields in the accelerator structures play an important role in the twin-bunch compression, and they can be used to extend the available time delay range. Based on the theoretical model and simulations we propose several methods to achieve larger time delay.

Self-seeding is a promising approach to significantly narrow the self-amplified spontaneous emission bandwidth of X-ray free-electron lasers (FELs) and hence to produce nearly transform-limited pulses. We study the radiation propagation through a grating monochromator installed at the Linac Coherent Light Source (LCLS). The monochromator design is based on a toroidal VLS grating working at a fixed incidence angle mounting without an entrance slit. It covers the spectral range from 500 eV to 1000 eV. The optical system was studied using a wave optics method to evaluate the performance of the self-seeding scheme. Our wave optics analysis takes into account the finite size of the coherent source, third-order aberrations and height error of the optical elements. Two propagation approaches are studied with time-dependent FEL simulations. In addition, the pulse-front tilt phenomenon effect is illustrated.

Electron beam energy chirp is an important parameter that affects the bandwidth and performance of a linac-based, free-electron laser. In this paper we study the wakefields generated by a beam passing between flat metallic plates with small corrugations, and then apply such a device as a passive dechirper for the Linac Coherent Light Source (LCLS) energy chirp control with a multi-GeV and femtosecond electron beam. Similar devices have been tested in several places at relatively low energies (∼100 MeV) and with relatively long bunches (>1 ps). In the parameter regime of the LCLS dechirper, with the corrugation size similar to the gap between the plates, the analytical solutions of the wakefields are no longer applicable, and we resort to a field matching program to obtain the wakes. Based on the numerical calculations, we fit the short-range, longitudinal wakes to simple formulas, valid over a large, useful parameter range. Finally, since the transverse wakefields—both dipole and quadrupole—are strong, we compute and include them in beam dynamics simulations to investigate the error tolerances when this device is introduced in the LCLS.

The use of a transverse gradient undulator (TGU) is viewed as an attractive option for free-electron lasers (FELs) driven by beams with a large energy spread. By suitably dispersing the electron beam and tilting the undulator poles, the energy spread effect can be substantially mitigated. However, adding the dispersion typically leads to electron beams with large aspect ratios. As a result, the presence of higher-order modes in the FEL radiation can become significant. To investigate this effect, we study the eigenmode properties of a TGU-based, high-gain FEL, using both an analytically-solvable model and a variational technique. Our analysis, which includes the fundamental and the higher-order FEL eigenmodes, can provide an estimate of the mode content for the output radiation. This formalism also enables us to study the trade-off between FEL gain and transverse coherence. Numerical results are presented for a representative soft X-ray, TGU FEL example.

In this paper, we propose a simple scheme that leverages existing x-ray free-electron laser hardware to produce stable single-spike, subfemtosecond x-ray pulses. By optimizing a high-harmonic radio-frequency linearizer to achieve nonlinear compression of a low-charge (20 pC) electron beam, we obtain a sharp current profile possessing a few-femtosecond full width at half maximum temporal duration. A reverse undulator taper is applied to enable lasing only within the current spike, where longitudinal space charge forces induce an electron beam time-energy chirp. Simulations based on the Linac Coherent Light Source parameters show that stable single-spike x-ray pulses with a duration less than 200 attoseconds can be obtained.

The performance of a free-electron laser (FEL) depends significantly on the various parameters of the driving electron beam. In particular, a large energy spread in the beam results in a substantial reduction of the FEL gain, an effect which is especially relevant when one considers FELs driven by plasma accelerators or ultimate storage rings. For such cases, one possible solution is to use a transverse gradient undulator (TGU). In this concept, the energy spread problem is mitigated by properly dispersing the electron beam and introducing a linear, transverse field dependence in the undulator. This paper presents a self-consistent theoretical analysis of a TGU-based, high-gain FEL which takes into account three-dimensional (3D) effects, including beam size variations along the undulator. The results of our theory compare favorably with simulation and are used in fast optimization studies of various x-ray FEL configurations.

We propose a simple method to significantly enhance the temporal coherence and spectral brightness of a self-amplified spontaneous emission (SASE) free-electron laser (FEL). In this purified SASE (pSASE) FEL, a few undulator sections (called slippage-boosted sections) resonant at a subharmonic of the FEL radiation are used in the middle stage of the exponential growth regime to amplify the radiation while simultaneously reducing the FEL bandwidth. In this slippage-boosted section, the average longitudinal velocity of electrons is reduced, which effectively increases the FEL slippage length that allows the radiation fields initially far apart to create a phase relation, leading to n times increase in FEL cooperation length, where n is the ratio of the resonant wavelength of the slippage-boosted section to that of the original FEL radiation. The purified radiation, as a seed with improved temporal coherence, is further amplified to saturation in the undulator sections tuned to the FEL wavelength. Using the linac coherent light source II (LCLS-II) parameters as an example, we show that with the proposed configuration the temporal coherence and spectral brightness of a SASE FEL can be significantly enhanced. This scheme may be applied to many SASE FEL light sources to enhance the FEL performance.

Free-electron laser (FEL) configurations in which the parameters of the electron beam vary along the undulator become relevant when considering new aspects of existing FELs or when exploring novel concepts. This paper describes a fully three-dimensional, analytical method suitable for studying such systems. As an example, we consider a seeded FEL driven by a beam with varying transverse sizes. In the context of the Vlasov-Maxwell formalism, a self-consistent equation governing the evolution of the radiation field amplitude is derived. An approximate solution to this equation is then obtained by employing an orthogonal expansion technique. This approach yields accurate estimates for both the amplified power and the radiation beam size. Specific numerical results are presented for two different sets of x-ray FEL parameters.

It is widely believed that a drive laser with uniform temporal and spatial laser profiles is required to generate the lowest emittance beam at the photoinjector. However, for a given 3 ps smooth-Gaussian laser temporal profile, our recent simulations indicate that a truncated-Gaussian laser spatial profile produces an electron beam with smaller emittance. The simulation results are qualitatively confirmed by later analytical calculation, and also confirmed by measurements: emittance reduction of ∼25% was observed at the linac coherent light source (LCLS) injector with a truncated-Gaussian laser spatial profile at the nominal operating bunch charge of 150 pC. There was a significant secondary benefit—laser transmission through the iris for the truncated-Gaussian profile was about twice that compared to the nearly uniform distribution, which significantly loosens the laser power and quantum efficiency requirements for drive laser system and photocathode. Since February 9, 2012, the drive laser with the truncated-Gaussian spatial distribution has been used for LCLS routine user operations and the corresponding free electron laser power is at least the same as the one when using the nearly uniform spatial profile.