Search

Microbial cell factories utilize renewable raw materials for industrial chemical production, providing a promising path for sustainable development. Bacillus subtilis is widely used in industry for its food safety properties, but challenges remain in the limitations of microbial fermentation. This study proposes a novel strategy based on lifespan engineering to design robust B. subtilis chassis cells to supplement traditional metabolic modification strategies that can alleviate cell autolysis, tolerate toxic substrates, and get a higher mass transfer efficiency. The modified chassis cells could produce high levels of l-glutaminase, and tolerate hydroquinone to produce α-arbutin efficiently. In a 5 L bioreactor, the l-glutaminase enzyme activity of the final strain CRE15TG was increased to 2817.4 ± 21.7 U mL−1, about 1.98-fold compared with that of the wild type. The α-arbutin yield of strain CRE15A was increased to 134.7 g L−1, about 1.34-fold compared with that of the WT. To our knowledge, both of the products in this study performed the highest yields reported so far. The chassis modification strategy described in this study can Improve the utilization efficiency of chassis cells, mitigate the possible adverse effects caused by excessive metabolic modification of engineered strains, and provide a new idea for the future design of microbial cell factories.

The coevolution of bacteria and bacteriophages has created a great diversity of mechanisms by which bacteria fight phage infection, and an equivalent diversity of mechanisms by which phages subvert bacterial immunity. Effective and continuous evolution by phages is necessary to deal with coevolving bacteria. In this study, to better understand the connection between phage genes and host range, we examine the isolation and genomic characterization of two bacteriophages, JNUWH1 and JNUWD, capable of infecting Escherichia coli. Sourced from factory fermentation pollutants, these phages were classified within the Siphoviridae family through TEM and comparative genomic analysis. Notably, the phages exhibited a viral burst size of 500 and 1,000 PFU/cell, with latent periods of 15 and 20 min, respectively. They displayed stability over a pH range of 5 to 10, with optimal activity at 37°C. The complete genomes of JNUWH1 and JNUWD were 44,785 bp and 43,818 bp, respectively. Phylogenetic analysis revealed their close genetic relationship to each other. Antibacterial assays demonstrated the phages’ ability to inhibit E. coli growth for up to 24 h. Finally, through laboratory-driven adaptive evolution, we successfully identified strains for both JNUWH1 and JNUWD with mutations in receptors specifically targeting lipopolysaccharides (LPS) and the lptD gene. Overall, these phages hold promise as additives in fermentation products to counter E. coli, offering potential solutions in the context of evolving bacterial resistance.

Abstract Background l-Leucine is a high-value amino acid with promising applications in the medicine and feed industries. However, the complex metabolic network and intracellular redox imbalance in fermentative microbes limit their efficient biosynthesis of l-leucine. Results In this study, we applied rational metabolic engineering and a dynamic regulation strategy to construct a plasmid-free, non-auxotrophic Escherichia coli strain that overproduces l-leucine. First, the l-leucine biosynthesis pathway was strengthened through multi-step rational metabolic engineering. Then, a cooperative cofactor utilization strategy was designed to ensure redox balance for l-leucine production. Finally, to further improve the l-leucine yield, a toggle switch for dynamically controlling sucAB expression was applied to accurately regulate the tricarboxylic acid cycle and the carbon flux toward l-leucine biosynthesis. Strain LEU27 produced up to 55 g/L of l-leucine, with a yield of 0.23 g/g glucose. Conclusions The combination of strategies can be applied to the development of microbial platforms that produce l-leucine and its derivatives.

Abstract Background During the production of L-arginine through high dissolved oxygen and nitrogen supply fermentation, the industrial workhorse Corynebacterium glutamicum is exposed to oxidative stress. This generates reactive oxygen species (ROS) and reactive nitrogen species (RNS), which are harmful to the bacteria. To address the issue and to maintain redox homeostasis during fermentation, the flavohaemoprotein (Hmp) was employed. Results The results showed that the overexpression of Hmp led to a decrease in ROS and RNS content by 9.4% and 22.7%, respectively, and improved the survivability of strains. When the strains were treated with H2O2 and NaNO2, the RT-qPCR analysis indicated an up-regulation of ammonium absorption and transporter genes amtB and glnD. Conversely, the deletion of hmp gives rise to the up-regulation of eight oxidative stress-related genes. These findings suggested that hmp is associated with oxidative stress and intracellular nitrogen metabolism genes. Finally, we released the inhibitory effect of ArnR on hmp. The Cc-ΔarnR-hmp strain produced 48.4 g/L L-arginine during batch-feeding fermentation, 34.3% higher than the original strain. Conclusions This report revealed the influence of dissolved oxygen and nitrogen concentration on reactive species of Corynebacterium glutamicum and the role of the Hmp in coping with oxidative stress. The Hmp first demonstrates related to redox homeostasis and nitrite metabolism, providing a feasible strategy for improving the robustness of strains.

Abstract ATP, an important cofactor, is involved in many biocatalytic reactions that require energy. Polyphosphate kinases (PPK) can provide energy for ATP-consuming reactions due to their cheap and readily available substrate polyphosphate. We determined the catalytic properties of PPK from different sources and found that PPK from Cytophaga hutchinsonii (ChPPK) had the best catalytic activity for the substrates ADP and polyP6. An extracellular–intracellular dual system was constructed to high-throughput screen for better catalytic activity of ChPPK mutants. Finally, the specific activity of ChPPKD82N-K103E mutant was increased by 4.3 times. Therefore, we focused on the production of L-theanine catalyzed by GMAS as a model of ATP regeneration. Supplying 150 mM ATP, GMAS enzyme could produce 16.8 ± 1.3 g/L L-theanine from 100 mM glutamate. When 5 mM ATP and 5 U/mL ChPPKD82N-K103E were added, the yield of L-theanine was 16.6 ± 0.79 g/L with the conversion rate of 95.6 ± 4.5% at 4 h. Subsequently, this system was scaled up to 200 mM and 400 mM glutamate, resulting in the yields of L-theanine for 32.3 ± 1.6 g/L and 62.7 ± 1.1 g/L, with the conversion rate of 92.8 ± 4.6% and 90.1 ± 1.6%, respectively. In addition, we also constructed an efficient ATP regeneration system from glutamate to glutamine, and 13.8 ± 0.2 g/L glutamine was obtained with the conversion rate of 94.4 ± 1.4% in 4 h after adding 6 U/ mL GS enzyme and 5 U/ mL ChPPKD82N-K103E, which further laid the foundation from glutamine to L-theanine catalyzed by GGT enzyme. This proved that giving the reaction an efficient ATP supply driven by the mutant enzyme enhanced the conversion rate of substrate to product and maximized the substrate value. This is a positively combination of high yield, high conversion rate and high economic value of enzyme catalysis. The mutant enzyme will further power the ATP-consuming biocatalytic reaction platform sustainably.

The application of synthetic biology tools to modulate gene expression to increase yield has been thoroughly demonstrated as an effective and convenient approach in industrial production. In this study, we employed a high-throughput screening strategy to identify a 5′ UTR sequence from the genome of B. subtilis 168. This sequence resulted in a 5.8-fold increase in the expression level of EGFP. By utilizing the 5′ UTR sequence to overexpress individual genes within the rib operon, it was determined that the genes ribD and ribAB serve as rate-limiting enzymes in the riboflavin synthesis pathway. Constructing a 5′ UTR library to regulate EGFP expression resulted in a variation range in gene expression levels exceeding 100-fold. Employing the same 5′ UTR library to regulate the expression of EGFP and mCherry within the operon led to a change in the expression ratio of these two genes by over 10,000-fold. So, employing a 5′ UTR library to modulate the expression of the rib operon gene and construct a synthetic rib operon resulted in a 2.09-fold increase in riboflavin production. These results indicate that the 5′ UTR sequence identified and characterized in this study can serve as a versatile synthetic biology toolkit for achieving complex metabolic network reconstruction. This toolkit can facilitate the fine-tuning of gene expression to produce target products.

Abstract Background (R)-mandelic acid (R-MA) is a highly valuable hydroxyl acid in the pharmaceutical industry. However, biosynthesis of optically pure R-MA remains significant challenges, including the lack of suitable catalysts and high toxicity to host strains. Adaptive laboratory evolution (ALE) was a promising and powerful strategy to obtain specially evolved strains. Results Herein, we report a new cell factory of the Gluconobacter oxydans to biocatalytic styrene oxide into R-MA by utilizing the G. oxydans endogenous efficiently incomplete oxidization and the epoxide hydrolase (SpEH) heterologous expressed in G. oxydans. With a new screened strong endogenous promoter P 12780 , the production of R-MA was improved to 10.26 g/L compared to 7.36 g/L of using P lac . As R-MA showed great inhibition for the reaction and toxicity to cell growth, adaptive laboratory evolution (ALE) strategy was introduced to improve the cellular R-MA tolerance. The adapted strain that can tolerate 6 g/L R-MA was isolated (named G. oxydans STA), while the wild-type strain cannot grow under this stress. The conversion rate was increased from 0.366 g/L/h of wild type to 0.703 g/L/h by the recombinant STA, and the final R-MA titer reached 14.06 g/L. Whole-genome sequencing revealed multiple gene-mutations in STA, in combination with transcriptome analysis under R-MA stress condition, we identified five critical genes that were associated with R-MA tolerance, among which AcrA overexpression could further improve R-MA titer to 15.70 g/L, the highest titer reported from bulk styrene oxide substrate. Conclusions The microbial engineering with systematic combination of static regulation, ALE, and transcriptome analysis strategy provides valuable solutions for high-efficient chemical biosynthesis, and our evolved G. oxydans would be better to serve as a chassis cell for hydroxyl acid production.

Previous reports on the effects of probiotics on farmed fish have focused more on dietary supplementation, and this study evaluated the effects of Pseudomonas stutzeri F2 supplementation in rearing water on juvenile spotted seabass (Lateolabrax maculatus). Different from the control group (T0), where ammonia nitrogen levels were reduced by water exchange in the circulation system, the T1 and T2 groups supplemented the rearing water with low (3.0 × 103 CFU/mL) and high (3.0 × 105 CFU/mL) concentrations of P. stutzeri F2 with the ability to remove ammonia nitrogen and nitrite, respectively. After 33 d of rearing, the weight gain rate, specific growth rate, feed utilization and survival rate of the experimental group of spotted seabass were significantly improved (p

Abstract Background Acetoin (AC) is a vital platform chemical widely used in food, pharmaceutical and chemical industries. With increasing concern over non-renewable resources and environmental issues, using low-cost biomass for acetoin production by microbial fermentation is undoubtedly a promising strategy. Results This work reduces the disadvantages of Bacillus subtilis during fermentation by regulating genes involved in spore formation and autolysis. Then, optimizing intracellular redox homeostasis through Rex protein mitigated the detrimental effects of NADH produced by the glycolytic metabolic pathway on the process of AC production. Subsequently, multiple pathways that compete with AC production are blocked to optimize carbon flux allocation. Finally, the population cell density-induced promoter was used to enhance the AC synthesis pathway. Fermentation was carried out in a 5-L bioreactor using bagasse lignocellulosic hydrolysate, resulting in a final titer of 64.3 g/L, which was 89.5% of the theoretical yield. Conclusions The recombinant strain BSMAY-4-P srfA provides an economical and efficient strategy for large-scale industrial production of acetoin.

Abstract Background D-allulose, a hexulose monosaccharide with low calorie content and high sweetness, is commonly used as a functional sugar in food and nutrition. However, enzyme preparation of D-allulose from D-frutose was severely hindered by the non-enzymatic browning under alkaline and high-temperature, and the unnecessary by-products further increased the difficulties in separation and extraction for industrial applications. Here, to address the above issue during the production process, a tandem D-allulose 3-epimerase (DPEases) isomerase synergistic expression strategy and an auto-inducible promoter engineering were levered in Bacillus subtilis 168 (Bs168) for efficient synthesis of D-allulose under the acidic conditions without browning. Results First, based on the dicistron expression system, two DPEases with complementary functional characteristics from Dorea sp. CAG:317 (DSdpe) and Clostridium cellulolyticum H10 (RCdpe) were expressed in tandem under the promoter HpaII in one cell. A better potential strain Bs168/pMA5-DSdpe-RCdpe increases enzyme activity to 18.9 U/mL at acidic conditions (pH 6.5), much higher than 17.2 and 16.7 U/mL of Bs168/pMA5-DSdpe and Bs168/pMA5-RCdpe, respectively. Subsequently, six recombinant strains based on four constitutive promoters were constructed in variable expression cassettes for improving the expression level of protein. Among those engineered strains, Bs168/pMA5-PspoVG-DSdpe-PsrfA-RCdpe exhibited the highest enzyme activity with 480.1 U/mL on fed-batch fermentation process in a 5 L fermenter at pH 6.5, about 2.1-times higher than the 228.5 U/mL of flask fermentation. Finally, the maximum yield of D-allulose reached as high as 163.5 g/L at the fructose concentration (50% w/v) by whole-cell biocatalyst. Conclusion In this work, the engineered recombinant strain Bs168/pMA5-PspoVG-DSdpe-PsrfA-RCdpe was demonstrated as an effective microbial cell factory for the high-efficient synthesis of D-allulose without browning under acidic conditions. Based on the perspectives from this research, this strategy presented here also made it possible to meet the requirements of the industrial hyper-production of other rare sugars under more acidic conditions in theory.

d-tagatose is a low-calorie alternative to sucrose natural monosaccharide that is nearly as sweet. As a ketohexose, d-tagatose has disease-relieving and health-promoting properties. Due to its scarcity in nature, d-tagatose is mainly produced through chemical and biological methods. Compared to traditional chemical methods, biological methods use whole cells and isolated enzymes as catalysts under mild reaction conditions with few by-products and no pollution. Nowadays, biological methods have become a very important topic in related fields due to their high efficiency and environmental friendliness. This paper introduces the functions and applications of d-tagatose and systematically reviews its production, especially by l-arabinose isomerase (L-AI), using biological methods. The molecular structures and catalytic mechanisms of L-AIs are also analyzed. In addition, the properties of L-AIs from different microbial sources are summarized. Finally, we overview strategies to improve the efficiency of d-tagatose production by engineering L-AIs and provide prospects for the future bioproduction of d-tagatose.

Abstract Background Agmatine is a member of biogenic amines and is an important medicine which is widely used to regulate body balance and neuroprotective effects. At present, the industrial production of agmatine mainly depends on the chemical method, but it is often accompanied by problems including cumbersome processes, harsh reaction conditions, toxic substances production and heavy environmental pollution. Therefore, to tackle the above issues, arginine decarboxylase was overexpressed heterologously and rationally designed in Corynebacterium crenatum to produce agmatine from glucose by one-step fermentation. Results In this study, we report the development in the Generally Regarded as Safe (GRAS) l-arginine-overproducing C. crenatum for high-titer agmatine biosynthesis through overexpressing arginine decarboxylase based on metabolic engineering. Then, arginine decarboxylase was mutated to release feedback inhibition and improve catalytic activity. Subsequently, the specific enzyme activity and half-inhibitory concentration of I534D mutant were increased 35.7% and 48.1%, respectively. The agmatine production of the whole-cell bioconversion with AGM3 was increased by 19.3% than the AGM2. Finally, 45.26 g/L agmatine with the yield of 0.31 g/g glucose was achieved by one-step fermentation of the engineered C. crenatum with overexpression of speA I534D. Conclusions The engineered C. crenatum strain AGM3 in this work was proved as an efficient microbial cell factory for the industrial fermentative production of agmatine. Based on the insights from this work, further producing other valuable biochemicals derived from l-arginine by Corynebacterium crenatum is feasible.

Abstract Background Clostridium carboxidivorans P7 is capable of producing ethanol and butanol from inexpensive and non-food feedstock, such as syngas. Achieving improved ethanol and butanol production in the strain for industrial application depends on the energetics and biomass, especially ATP availability. Results This study found that exogenous addition of citrulline promoted accumulation of ATP, increased specific growth rate, and reduced the doubling time of C. carboxidivorans P7. In heterotrophic fermentation experiments, the addition of citrulline increased intracellular ATP by 3.39-fold, significantly enhancing the production of total alcohol (ethanol + butanol) by 20%. Moreover, in the syngas fermentation experiments, the addition of citrulline improved the level of intracellular ATP and the biomass by 80.5% and 31.6%, respectively, resulting in an 18.6% and 60.3% increase in ethanol and the alcohol/acid production ratio, respectively. Conclusions This is the first report that citrulline could promote the growth of C. carboxidivorans P7 and increase the level of intracellular ATP, which is of great significance for the use of C. carboxidivorans P7 to synthesize biofuels.

Background: Erythritol is a zero-calorie sweetener that is widely used in the food, pharmaceutical, and medical industries. Crude glycerol is the main by-product of biodiesel, and the effective utilization of crude glycerol will help to improve biodiesel viability. Previous studies on the production of erythritol from Y. lipolytica using crude glycerol as a carbon source have focused on optimizing the fermentation process of the mutant Y. lipolytica Wratislavia K1, while metabolic engineering has not been successfully applied.Results: To this end, we engineered the yeast Y. lipolytica to increase the productivity of this strain. Wild strains tolerant to high concentrations of crude glycerol were screened and identified. A series of rational metabolic approaches were employed to improve erythritol production. Among them, the engineered strain Y-04, obtained by tandem overexpression of GUT1 and GUT2, significantly increased glycerol assimilation by 33.3%, which was consistent with the results of RT-qPCR analysis. The effects of tandem overexpression of GUT1, GUT2, TKL1, and TAL1 on erythritol synthesis were also evaluated. The best results were obtained using a mutant that overexpressed GUT1, GUT2, and TKL1 and knocked out EYD1. The final Y-11 strain produced 150 g/l erythritol in a 5-L bioreactor with a yield and productivity of 0.62 g/g and 1.25 g/l/h, respectively. To the best of our knowledge, this is the highest erythritol yield and productivity from crude glycerol ever reported in Y. lipolytica.Conclusion: This work demonstrated that overexpression of GUT1, GUT2, and TKL1 and knockdown of EYD1 could be used to improve crude glycerol utilization and erythritol synthesis in Y. lipolytica. The process parameters such as erythritol yield and productivity were significantly elevated, which is valuable for industrial applications. Crude glycerol, as a carbon source, could efficiently restrict the synthesis of by-products while enhancing the generation of erythritol, compared to glucose. This indicates considerable potential for synthesizing value-added products from crude glycerol by Y. lipolytica.

Corynebacterium glutamicum is a Gram-positive bacterium (non-spore-forming) that has been wildly used for amino acid production. Due to its stable protein secretion, low extracellular hydrolase activity, and non-toxicity, the application field of C. glutamicum has been greatly expanded. Currently, gene editing technology based on synthetic biology has great potential for synthetic biology research and genetic modification in C. glutamicum because of its ability to efficiently regulate the physiological and metabolic networks of the strain. Therefore, we summarize the gene editing tools and strategies of C. glutamicum from the aspects of genetic modification and expression elements, and we also describe the effects of gene editing techniques on a variety of products such as amino acids and their derivatives, recombinant proteins, and functional sugars, which provide a certain theoretical basis for the research on the modification of C. glutamicum strains and industrial applications. Finally, we prospect the design and industrial application of C. glutamicum genetic modification from multiple perspectives based on gene editing techniques.

Abstract L-valine is an essential amino acid that has wide and expanding applications with a suspected growing market demand. Its applicability ranges from animal feed additive, ingredient in cosmetic and special nutrients in pharmaceutical and agriculture fields. Currently, fermentation with the aid of model organisms, is a major method for the production of L-valine. However, achieving the optimal production has often been limited because of the metabolic imbalance in recombinant strains. In this review, the constrains in L-valine biosynthesis are discussed first. Then, we summarize the current advances in engineering of microbial cell factories that have been developed to address and overcome major challenges in the L-valine production process. Future prospects for enhancing the current L-valine production strategies are also discussed.

Prodigiosin (PG), a red linear tripyrrole pigment produced by Serratia marcescens, has attracted attention due to its immunosuppressive, antimicrobial, and anticancer properties. Although many studies have been used to dissect the biosynthetic pathways and regulatory network of prodigiosin production in S. marcescens, few studies have been focused on improving prodigiosin production through metabolic engineering in this strain. In this study, transcription factor engineering and promoter engineering was used to promote the production of prodigiosin in S. marcescens JNB5-1. Firstly, through construing of a Tn5G transposon insertion library of strain JNB5-1, it was found that the DNA-binding response regulator BVG89_19895 (OmpR) can promote prodigiosin synthesis in this strain. Then, using RNA-Seq analysis, reporter green fluorescent protein analysis and RT-qPCR analysis, the promoter P17 (PRplJ) was found to be a strong constitutive promoter in strain JNB5-1. Finally, the promoter P17 was used for overexpressing of prodigiosin synthesis activator OmpR and PsrA in strain JNB5-1 and a recombinant strain PG-6 was obtained. Shake flask analysis showed that the prodigiosin titer of this strain was increased to 10.25 g/L, which was 1.62-times that of the original strain JNB5-1 (6.33 g/L). Taken together, this is the first well-characterized constitutive promoter library from S. marcescens, and the transcription factor engineering and promoter engineering can be also useful strategies to improve the production of other high value-added products in S. marcescens.

Sucrose isomerase (SI), catalyzing sucrose to isomaltulose, has been widely used in isomaltulose production, but its poor thermostability is still resisted in sustainable batches production. Here, protein engineering and one-step immobilized cell strategy were simultaneously coupled to maintain steady state for long-term operational stabilities. First, rational design of Pantoea dispersa SI (PdSI) for improving its thermostability by predicting and substituting the unstable amino acid residues was investigated using computational analysis. After screening mutagenesis library, two single mutants (PdSIV280L and PdSIS499F) displayed favorable characteristics on thermostability, and further study found that the double mutant PdSIV280L/S499F could stabilize PdSIWT better. Compared with PdSIWT, PdSIV280L/S499F displayed a 3.2°C-higher Tm, and showed a ninefold prolonged half-life at 45°C. Subsequently, a one-step simplified immobilization method was developed for encapsulation of PdSIV280L/S499F in food-grade Corynebacterium glutamicum cells to further enhance the recyclability of isomaltulose production. Recombinant cells expressing combinatorial mutant (RCSI2) were successfully immobilized in 2.5% sodium alginate without prior permeabilization. The immobilized RCSI2 showed that the maximum yield of isomaltulose by batch conversion reached to 453.0 g/L isomaltulose with a productivity of 41.2 g/l/h from 500.0 g/L sucrose solution, and the conversion rate remained 83.2% after 26 repeated batches.

With the increasing use of animal and plant proteins, pollution due to nitrogen sources is attracting increasing attention. In particular, the amount of nitrogen-containing sewage discharged into the environment has increased significantly, causing eutrophication of water bodies and environmental degradation of water quality. Traditionally, nitrifying bacteria perform ammonia nitrification under aerobic conditions, while denitrifying bacteria perform nitrate/nitrite denitrification under anaerobic conditions. However, heterotrophic nitrifying and aerobic denitrifying microorganisms (HNADs) perform ammonia nitrification and nitrate/nitrite denitrification under the same aerobic conditions using an organic carbon source, which is a much simpler and more efficient process. In this review, the distribution and evolutionary relationships of novel HNADs strains are presented, and the influencing factors, metabolic pathways, key enzymes, and practical applications of HNADs are reviewed.

Cofactor regeneration is indispensable to avoid the addition of large quantities of cofactor NADH or NAD+ in oxidation-reduction reactions. Water-forming NADH oxidase (Nox) has attracted substantive attention as it can oxidize cytosolic NADH to NAD+ without concomitant accumulation of by-products. However, its applications have some limitations in some oxidation-reduction processes when its optimum pH is different from its coupled enzymes. In this study, to modify the optimum pH of BsNox, fifteen relevant candidates of site-directed mutations were selected based on surface charge rational design. As predicted, the substitution of this asparagine residue with an aspartic acid residue (N22D) or with a glutamic acid residue (N116E) shifts its pH optimum from 9.0 to 7.0. Subsequently, N20D/N116E combined mutant could not only downshift the pH optimum of BsNox but also significantly increase its specific activity, which was about 2.9-fold at pH 7.0, 2.2-fold at pH 8.0 and 1.2-fold at pH 9.0 that of the wild-type. The double mutant N20D/N116E displays a higher activity within a wide range of pH from 6 to 9, which is wider than the wide type. The usability of the BsNox and its variations for NAD+ regeneration in a neutral environment was demonstrated by coupling with a glutamate dehydrogenase for α-ketoglutaric acid (α-KG) production from L-glutamic acid (L-Glu) at pH 7.0. Employing the variation N20D/N116E as an NAD+ regeneration coenzyme could shorten the process duration; 90% of L-Glu were transformed into α-KG within 40 min vs. 70 min with the wild-type BsNox for NAD+ regeneration. The results obtained in this work suggest the promising properties of the BsNox variation N20D/N116E are competent in NAD+ regeneration applications under a neutral environment.

Lactic acid bacteria represent a worthwhile organism within the microbial consortium for the food sector, health, and biotechnological applications. They tend to offer high stability to environmental conditions, with an indicated increase in product yield, alongside their moderate antimicrobial activity. Lack of endotoxins and inclusion bodies, extracellular secretion, and surface display with other unique properties, are all winning attributes of these Gram-positive lactic acid bacteria, of which, Pediococcus is progressively becoming an attractive and promising host, as the next-generation probiotic comparable with other well-known model systems. Here, we presented the biotechnological developments in Pediococcal bacteriocin expression system, contemporary variegated models of Pediococcus and lactic acid bacteria strains as microbial cell factory, most recent applications as possible live delivery vector for use as therapeutics, as well as upsurging challenges and future perspective. With the radical introduction of artificial intelligence and neural network in Synthetic Biology, the microbial usage of lactic acid bacteria as an alternative eco-friendly strain, with safe use properties compared with the already known conventional strains is expected to see an increase in various food and biotechnological applications in years to come as it offers better hope of safety, accuracy, and higher efficiency.

Promoters serve as the switch of gene transcription, playing an important role in regulating gene expression and metabolites production. However, the approach to screening strong constitutive promoters in microorganisms is still limited. In this study, a novel method was designed to identify strong constitutive promoters in E. coli and S. marcescens based on random genomic interruption and fluorescence-activated cell sorting (FACS) technology. First, genomes of E. coli, Bacillus subtilis, and Corynebacterium glutamicum were randomly interrupted and inserted into the upstream of reporter gene gfp to construct three promoter libraries, and a potential strong constitutive promoter (PBS) suitable for E. coli was screened via FACS technology. Second, the core promoter sequence (PBS76) of the screened promoter was identified by sequence truncation. Third, a promoter library of PBS76 was constructed by installing degenerate bases via chemical synthesis for further improving its strength, and the intensity of the produced promoter PBS76-100 was 59.56 times higher than that of the promoter PBBa_J23118. Subsequently, promoters PBBa_J23118, PBS76, PBS76-50, PBS76-75, PBS76-85, and PBS76-100 with different strengths were applied to enhance the metabolic flux of L-valine synthesis, and the L-valine yield was significantly improved. Finally, a strong constitutive promoter suitable for S. marcescens was screened by a similar method and applied to enhance prodigiosin production by 34.81%. Taken together, the construction of a promoter library based on random genomic interruption was effective to screen the strong constitutive promoters for fine-tuning gene expression and reprogramming metabolic flux in various microorganisms.

ε-poly-L-lysine (ε-PL) is a naturally occurring poly(amino acid) of varying polymerization degree, which possesses excellent antimicrobial activity and has been widely used in food and pharmaceutical industries. To provide new perspectives from recent advances, this review compares several conventional and advanced strategies for the discovery of wild strains and development of high-producing strains, including isolation and culture-based traditional methods as well as genome mining and directed evolution. We also summarize process engineering approaches for improving production, including optimization of environmental conditions and utilization of industrial waste. Then, efficient downstream purification methods are described, including their drawbacks, followed by the brief introductions of proposed antimicrobial mechanisms of ε-PL and its recent applications. Finally, we discuss persistent challenges and future perspectives for the commercialization of ε-PL.

Bacillus subtilis is a gram-positive bacterium, a promising microorganism due to its strong extracellular protein secretion ability, non-toxic, and relatively mature industrial fermentation technology. However, cell autolysis during fermentation restricts the industrial application of B. subtilis. With the fast advancement of molecular biology and genetic engineering technology, various advanced procedures and gene editing tools have been used to successfully construct autolysis-resistant B. subtilis chassis cells to manufacture various biological products. This paper first analyses the causes of autolysis in B. subtilis from a mechanistic perspective and outlines various strategies to address autolysis in B. subtilis. Finally, potential strategies for solving the autolysis problem of B. subtilis are foreseen.

In this study, oak barrels, glazed pottery altars, unglazed pottery altars, and stainless-steel tanks were selected as aging containers for red wine, and phenolic compounds and antioxidant activity were analyzed and compared. The color of red wine in unglazed pottery altars and glazed pottery altars changed to brick red and brownish yellow, respectively; the color of red wine in oak barrels did not change significantly; and color retention was best in stainless-steel tanks. The total content of anthocyanins and nonanthocyanin phenolic compounds was higher in the unglazed pottery altar group (227.68 mg/L and 288.88 mg/L, respectively) than in the oak barrel group (209.46 mg/L and 273.42 mg/L), the stainless-steel tank group (221.92 mg/L and 213.23 mg/L), or the glazed pottery altar group (74.71 mg/L and 204.43 mg/L). After aging, DPPH (1,1-diphenyl-2-picrylhydrazine free radical scavenging ability), I confirm. (ABTS+ free radical scavenging ability), and FRAP (a ferric ion-reducing antioxidant power reduction of Ion Ability) were decreased by 8.8%, 0.5%, and 17.1%, respectively, in the unglazed pottery altar group; by 15.2%, 1.7%, and 19.5%, respectively, in the oak barrel group; by 18.0%, 1.8%, and 20.0%, respectively, in the stainless-steel tank group; and by 18.7%, 4.2%, and 34.9%, respectively, in the glazed pottery altar group. In conclusion, antioxidative ability decreased less in the unglazed pottery altar group than in the other three groups, indicating that unglazed pottery altars retain antioxidant components in red wine well.

α-glucosidase is an essential enzyme for the production of isomaltooligosaccharides (IMOs). Allowing α-glucosidase to operate at higher temperatures (above 60 °C) has many advantages, including reducing the viscosity of the reaction solution, enhancing the catalytic reaction rate, and achieving continuous production of IMOs. In the present study, the thermal stability of α-glucosidase was significantly improved by constructing cyclized proteins. We screened a thermotolerant α-glucosidase (AGL) with high transglycosylation activity from Thermoanaerobacter ethanolicus JW200 and heterologously expressed it in Bacillus subtilis 168. After forming the cyclized α-glucosidase by different isopeptide bonds (SpyTag/SpyCatcher, SnoopTag/SnoopCatcher, SdyTag/SdyCatcher, RIAD/RIDD), we determined the enzymatic properties of cyclized AGL. The optimal temperature of all cyclized AGL was increased by 5 °C, and their thermal stability was generally improved, with SpyTag-AGL-SpyCatcher having a 1.74-fold increase compared to the wild-type. The results of molecular dynamics simulations showed that the RMSF values of cyclized AGL decreased, indicating that the rigidity of the cyclized protein increased. This study provides an efficient method for improving the thermal stability of α-glucosidase.

The low productivity in long fermentation duration and high-salt working conditions limit the application of L-glutaminase in soy sauce brewing. In this study, a novel L-glutaminase (LreuglsA) with eminent salt tolerance was mined and achieved more than 70% activity with 30% NaCl. To improve the robustness of the enzyme at different fermentation strategies, mutation LreuglsAH105K was built by a computer-aided design, and the recombinant protein expression level, an essential parameter in industrial applications, was increased 5.61-fold with the synthetic biology strategy by improving the mRNA stability. Finally, the LreuglsAH105K functional expression box was contributed to Bacillus subtilis 168 by auxotrophic complementation, and the production in a 5-L bioreactor was improved to 2516.78 ± 20.83 U mL−1, the highest production ever reported. When the immobilized cells were applied to high-salt dilute-state soy sauce brewing, the L-glutamate level was increased by 45.9%. This work provides insight into the salt-tolerant enzyme for improving the efficiency of industrial applications.

Abstract Background Acetoin (AC) and 2,3-butanediol (2,3-BD) as highly promising bio-based platform chemicals have received more attentions due to their wide range of applications. However, the non-efficient substrate conversion and mutually transition between AC and 2,3-BD in their natural producing strains not only led to a low selectivity but also increase the difficulty of downstream purification. Therefore, synthetic engineering of more suitable strains should be a reliable strategy to selectively produce AC and 2,3-BD, respectively. Results In this study, the respective AC (alsS and alsD) and 2,3-BD biosynthesis pathway genes (alsS, alsD, and bdhA) derived from Bacillus subtilis 168 were successfully expressed in non-natural AC and 2,3-BD producing Corynebacterium crenatum, and generated recombinant strains, C. crenatum SD and C. crenatum SDA, were proved to produce 9.86 g L−1 of AC and 17.08 g L−1 of 2,3-BD, respectively. To further increase AC and 2,3-BD selectivity, the AC reducing gene (butA) and lactic acid dehydrogenase gene (ldh) in C. crenatum were then deleted. Finally, C. crenatumΔbutAΔldh SD produced 76.93 g L−1 AC in one-step biocatalysis with the yield of 0.67 mol mol−1. Meanwhile, after eliminating the lactic acid production and enhancing 2,3-butanediol dehydrogenase activity, C. crenatumΔldh SDA synthesized 88.83 g L−1 of 2,3-BD with the yield of 0.80 mol mol−1. Conclusions The synthetically engineered C. crenatumΔbutAΔldh SD and C. crenatumΔldh SDA in this study were proved as an efficient microbial cell factory for selective AC and 2,3-BD production. Based on the insights from this study, further synthetic engineering of C. crenatum for AC and 2,3-BD production is suggested.

Abstract Background Styrene monooxygenase (SMO) catalyzes the first step of aromatic alkene degradation yielding the corresponding epoxides. Because of its broad spectrum of substrates, the enzyme harbors a great potential for an application in medicine and chemical industries. Results In this study, we achieved higher enzymatic activity and better stability towards styrene by enlarging the ligand entrance tunnel and improving the hydrophobicity through error-prone PCR and site-saturation mutagenesis. It was found that Asp305 (D305) hindered the entrance of the FAD cofactor according to the model analysis. Therefore, substitution with amino acids possessing shorter side chains, like glycine, opened the entrance tunnel and resulted in up to 2.7 times higher activity compared to the wild-type enzyme. The half-lives of thermal inactivation for the variant D305G at 60 °C was 28.9 h compared to only 3.2 h of the wild type SMO. Moreover, overexpression of SMO in Pseudomonas putida KT2440 with NADH regeneration was carried out in order to improve biotransformation efficiency for epoxide production. A hexadecane/buffer (v/v) biphasic system was applied in order to minimize the inactivation effect of high substrate concentrations on the SMO enzyme. Finally, SMO activities of 190 U/g CDW were measured and a total amount of 20.5 mM (S)-styrene oxide were obtained after 8 h. Conclusions This study offers an alternative strategy for improved SMO expression and provides an efficient biocatalytic system for epoxide production via engineering the entrance tunnel of the enzyme’s active site.

Prodigiosin (PG) is a typical secondary metabolite mainly produced by Serratia marcescens. CpxR protein is an OmpR family transcriptional regulator in Gram-negative bacteria. Firstly, it was found that insertion mutation of cpxR in S. marcescens JNB 5-1 by a transposon Tn5G increased the production of PG. Results from the electrophoretic mobility shift assay (EMSA) indicated that CpxR could bind to the promoter of the pig gene cluster and repress the transcription levels of genes involved in PG biosynthesis in S. marcescens JNB 5-1. In the ΔcpxR mutant strain, the transcription levels of the pig gene cluster and the genes involved in the pathways of PG precursors, such as proline, pyruvate, serine, methionine, and S-adenosyl methionine, were significantly increased, hence promoting the production of PG. Subsequently, a fusion segment composed of the genes proC, serC, and metH, responsible for proline, serine, and methionine, was inserted into the cpxR gene in S. marcescens JNB 5-1. On fermentation by the resultant engineered S. marcescens, the highest PG titer reached 5.83 g/L and increased by 41.9%, relative to the parental strain. In this study, we revealed the role of CpxR in PG biosynthesis and provided an alternative strategy for the engineering of S. marcescens to enhance PG production.

Among many genes encoding for amino acid dehydrogenase, a novel leucine dehydrogenase gene from Exiguobacterium sibiricum (EsiLeuDH) was isolated by using genome mining strategy. EsiLeuDH was overexpressed in Escherichia coli BL21 (DE3), followed by purification and characterization. The high thermostability of the enzyme confers its half-life up to 14.7 h at 50°C. Furthermore, the substrate specificity shows a broad spectrum, including many L-amino acids and aliphatic α-keto acids, especially some aryl α-keto acids. This enzyme coupled with recombinant formate dehydrogenase (FDH) was used to catalyze trimethylpyruvic acid (TMP) through reductive amination to generate enantiopure L-tert-leucine (L-Tle). In order to overcome the substrate inhibition effect, a fed-batch feeding strategy was adopted to transform up to 0.8 M of TMP to L-Tle, with an average conversion rate of 81% and L-Tle concentration of 65.6 g⋅L–1. This study provides a highly efficient biocatalyst for the synthesis of L-Tle and lays the foundation for large-scale production and application of chiral non-natural amino acids.

The high yield mutants require a high-throughput screening method to obtain them quickly. Here, we developed an L-arginine biosensor (ARG-Select) to obtain increased L-arginine producers among a large number of mutant strains. This biosensor was constructed by ArgR protein and argC promoter, and could provide the strain with the output of bacterial growth via the reporter gene sacB; strains with high L-arginine production could survive in 10% sucrose screening. To extend the screening limitation of 10% sucrose, the sensitivity of ArgR protein to L-arginine was decreased. Corynebacterium crenatum SYPA5-5 and its systems pathway engineered strain Cc6 were chosen as the original strains. This biosensor was employed, and L-arginine hyperproducing mutants were screened. Finally, the HArg1 and DArg36 mutants of C. crenatum SYPA5-5 and Cc6 could produce 56.7 and 95.5 g L–1 of L-arginine, respectively, which represent increases of 35.0 and 13.5%. These results demonstrate that the transcription factor-based biosensor could be applied in high yield strains selection as an effective high-throughput screening method.

Serratia marcescens, a gram-negative bacterium, found in a wide range of ecological niches can produce several high-value products, including prodigiosin, althiomycin, and serratamolide. Among them, prodigiosin has attracted attention due to its immunosuppressive, antimicrobial, and anticancer properties. However, the regulatory mechanisms behind prodigiosin synthesis in Serratia marcescens remains limited. Here, a transposon mutant library was constructed to identify the genes related to prodigiosin synthesis, and BVG90_02415 gene encoding a peptidoglycan synthesizing enzyme D-Ala-D-Ala carboxypeptidase DacA was found to negatively regulates prodigiosin synthesis. Quantitative measurements revealed that disruption of dacA increased prodigiosin production 1.46-fold that of the wild-type strain JNB5-1 in fermentation medium. By comparing differences in cell growth, pigA gene expression level, cell morphology, membrane permeability, and intracellular prodigiosin concentration between wild-type strain JNB5-1 and dacA mutant SK4-72, results revealed that the mechanism for hyper-producing of prodigiosin by the dacA mutant was probably that dacA disruption enhanced prodigiosin leakage, which in turn alleviated feedback inhibition of prodigiosin and increased expression of pig gene cluster. Collectively, this work provides a novel insight into regulatory mechanisms of prodigiosin synthesis and uncovers new roles of DacA protein in regulating cell growth, cell morphology, and membrane permeability in Serratia marcescens. Finally, this study offers a new strategy for improving production of high-value compounds in Serratia marcescens.

You et al. show that SrpA, a small protein widely conserved among bacteria, controls core cellular processes in response to phage infection and environmental signals in Pseudomonas aeruginosa, including cell motility, chemotaxis, biofilm formation, and virulence.

d-tagatose is a popular functional monosaccharide produced from lactose by β-galactosidase and arabinose isomerase. In this study, two d-alanine-deficient heterologous gene expression systems were constructed, B. subtilis 168 D1 and B. subtilis 168 D2, using overlapping extension PCR and the CRE/loxP system. The lacZ gene for β-galactosidase was integrated into a specific locus of the chassis B. subtilis 168 D2. A mutually complementary plasmid pMA5 with the alanine racemase gene alrA attached to it was constructed and used to assemble recombinant plasmids overexpressing β-galactosidase and arabinose isomerase. Afterward, an integrated recombinant was constructed by the plasmid expressing the arabinose isomerase gene araA of E. coli transform-competent B. subtilis 168 D2 cells. The co-expressing plasmids were introduced into alanine racemase knockout B. subtilis 168 D1. Whole-cell bioconversion was performed using the integrated recombinant with a maximum yield of 96.8 g/L d-tagatose from 500 g/L lactose, and the highest molar conversions were 57.2%. B. subtilis 168 D1/pMA5-alrA-araA-lacZ is capable of single-cell one-step production of d-tagatose. This study provides a new approach to the production of functional sugars.

l-asparaginase (EC 3.5.1.1) hydrolyzes l-asparagine to produce l-aspartate and ammonia and is widely found in microorganisms, plants, and some rodent sera. l-asparaginase used for industrial production should have good thermostability. We heterologously expressed l-asparaginase from Rhizomucor miehei, selected nine loci for site-directed mutagenesis by rational design, and obtained two mutants with significantly improved thermostability. The optimal temperature of mutants S302I and S302M was 50 °C. After incubating the mutant and wild-type enzymes at 45 °C for 35 h, the residual activity of the wild-type enzyme (WT) was only about 10%. In contrast, the residual activity of S302I and S302M was more than 50%. After combination mutagenesis, Bacillus subtilis 168-pMA5-A344E/S302I was constructed using the food-safe host strain B. subtilis 168. Additionally, a 5′ untranslated region (UTR) modification strategy was adopted to enhance the expression level of R. miehei-derived l-asparaginase in B. subtilis. In a 5-L fermenter scale-up experiment, the enzyme activity of recombinant B. subtilis 168-pMA5-UTR-A344E/S302I reached 521.9 U·mL−1 by fed-batch fermentation.

Nitrogen pollution in water bodies is becoming increasingly serious, and how to remove nitrogen from water bodies economically and effectively has become a research hotspot. Especially in recent years, with the gradual expansion of aquaculture in China, the content of nitrite and other nitrogen-containing substances in water bodies has been increasing, which inhibits the growth of farm animals and is one of the causes of eutrophication in water bodies. In this study, a strain of bacteria was isolated from the sludge of an aquaculture fishpond and identified as Pseudomonas stutzeri, which can efficiently degrade nitrite. After continuous domestication in nitrite mixed solution, the nitrite nitrogen reduction capacity of P. stutzeri was significantly improved. Univariate experiments aiming to optimize the degradation conditions indicate that the optimal culture conditions for strain F2 are: medium with a carbon source of sodium succinate; C/N of 18; pH of 8; culture temperature of 28 °C; and shaking speed of 210 rpm in the shaker. Under the optimal culture conditions, the NO2−-N concentration of the culture solution was 300 mg/L, and the nitrite removal rate reached 98.67%. Meanwhile, the results of the nitrogen balance test showed that the strain converted 6.1% of the initial nitrogen into cellular organic nitrogen and 62.3% into gaseous nitrogen.

Inducible lysine decarboxylases (LDCs) are essential in various cellular processes of microorganisms and plants, especially under acid stress, which induces the expression of genes encoding LDCs. In this study, a novel Serratia marcesenes LDC (SmcadA) was successfully expressed in E. coli, purified and characterized. The protein had an optimal pH of 6 and a temperature of 40 °C and phylogenetic analysis to determine the evolution of SmcadA, which revealed a close relation to Enterobacteriaceae, Klebsiella sp., among others. The molecular weight of SmcadA was approximately 75 kDa after observation on SDS-PAGE and structural modeling showed the protein as a decamer, comprised of five interlinked dimers. The biocatalytic activity of the purified wild-type SmcadA (WT) was improved through site directed mutations and the results showed that the Arg595Lys mutant had the highest specific activity of 286.55 U/mg, while the Ser512Ala variant and wild-type SmcadA had 215.72 and 179.01 U/mg, respectively. Furthermore, molecular dynamics simulations revealed that interactions through hydrogen bonds between the protein residues and cofactor pyridoxal-5-phosphate (PLP) are vital for biocatalysis. Molecular Dynamics (MD) simulations also indicated that mutations conferred structural changes on protein residues and PLP hence altered the interacting residues with the cofactor, subsequently influencing substrate bioconversion. Moreover, the temperature also induced changes in orientation of cofactor PLP and amino acid residues. This work therefore demonstrates the successful expression and characterization of the purified novel lysine decarboxylase from Serratia marcesenes and provided insight into the mechanism of protein–cofactor interactions, highlighting the role of protein–ligand interactions in altering cofactor and binding site residue conformations, thus contributing to improved biocatalysis.

Unusual α-amino acids (UAAs) are important fundamental building blocks and play a key role in medicinal chemistry. Here, we constructed a hydrogen-borrowing dual-enzyme cascade for efficient synthesis of UAAs from α-hydroxy acids (α-HAs). D-mandelate dehydrogenase from Lactobacillus brevis (LbMDH) was screened for the catalysis of α-HAs to α-keto acids but with low activity towards aliphatic α-HAs. Therefore, we rational engineered LbMDH to improve its activity towards aliphatic α-HAs. The substitution of residue Leu243 located in the substrate entrance channel with nonpolar amino acids like Met, Trp, and Ile significantly influenced the enzyme activity towards different α-HAs. Compared with wild type (WT), variant L243W showed 103 U/mg activity towards D-α-hydroxybutyric acid, 1.7 times of the WT’s 60.2 U/mg, while its activity towards D-mandelic acid decreased. Variant L243M showed 2.3 times activity towards D-mandelic acid compared to WT, and its half-life at 40 °C increased to 150.2 h comparing with 98.5 h of WT. By combining LbMDH with L-leucine dehydrogenase from Bacillus cereus, the synthesis of structurally diverse range of UAAs from α-HAs was constructed. We achieved 90.7% conversion for L-phenylglycine production and 66.7% conversion for L-α-aminobutyric acid production. This redox self-sufficient cascade provided high catalytic efficiency and generated pure products.

Background: 3-Ketosteroid-Δ1-dehydrogenase (KSDD), a flavoprotein enzyme, catalyzes the bioconversion of 4-androstene-3,17-dione (AD) to androst-1,4-diene-3,17-dione (ADD). To date, there has been no report about characterization of KSDD from Mycobacterium neoaurum strains, which were usually employed to produce AD or ADD by fermentation. Results: In this work, Corynebacterium crenatum was chosen as a new host for heterologous expression of KSDD from M. neoaurum JC-12 after codon optimization of the KSDD gene. SDS-PAGE and western blotting results indicated that the recombinant C. crenatum harboring the optimized ksdd (ksddII) gene showed significantly improved ability to express KSDD. The expression level of KSDD was about 1.6-fold increased C. crenatum after codon optimization. After purification of the protein, we first characterized KSDD from M. neoaurum JC-12, and the results showed that the optimum temperature and pH for KSDD activity were 30°C and pH 7.0, respectively. The Km and Vmax values of purified KSDD were 8.91 μM and 6.43 mM/min. In this work, C. crenatum as a novel whole-cell catalyst was also employed and validated for bioconversion of AD to ADD. The highest transformation rate of AD to ADD by recombinant C. crenatum was about 83.87% after 10 h reaction time, which was more efficient than M. neoaurum JC-12 (only 3.56% at 10 h). Conclusions: In this work, basing on the codon optimization, overexpression, purification and characterization of KSDD, we constructed a novel system, the recombinant C. crenatum SYPA 5-5 expressing KSDD, to accumulate ADD from AD efficiently. This work provided new insights into strengthening sterol catabolism by overexpressing the key enzyme KSDD, for efficient ADD production.